Oops! deleted the hd from the left display when opening the hd

nmv, got it work. sorry!

The new computer will likely come with Lion pre-installed. It's possible that the new models will not work properly or at all using the retail version of Snow Leopard. You can swap the drive and see. If there's a problem then reinstall the original drive.
There are ways to transfer your files from the old computer to the new one. See:
How to use Migration Assistant to transfer files from another Mac
How to- migrating data to a new user account
Migration Assistant tips and tricks

Similar Messages

"The exception unknown software exception (0xc06d007e) occured in the application at location 0x7c812aeb" - error displayed when opening PDF files. What i do?

"The exception unknown software exception (0xc06d007e) occured in the application at location 0x7c812aeb" - error displayed when opening PDF files. What i do?

What is your Reader XI version?
Have you tried to disable Protected Mode [Edit | Preferences | Security (Enhanced)] ?

HT1849 After I delete songs manually from my iPhone 5s, when I try to pick a song, it will not chose that song but some song above it. How far up depends on how many I've deleted. How can I stop this so I can pick the correct song the first time?

After deleting songs manually from my phone, (say, I have a song on there twice and only want one or I realize I don't want a song on my iPhone) when I try to manually pick a song in the music app on my phone, the song that plays will be one that is a number of songs above the one I chose. If I delete a number of songs, it may be four or five songs above the one I want to play. It continues after I sync it in iTunes. How do I stop this? Thanks, Gregg

Hi Gregg,
Have you tried resetting the device (nothing will be lost): Hold down the Home and Power buttons at the same time and continue to hold them down until the Apple appears (up to 30 seconds). Once the Home screen redisplays, see if your Music app is behaving normally.
Cheers,
GB

How do I change the search engine that displays when opening a new tab-Bing comes up and I want Google.

I'm using Firefox 15 on a Mac and there don't seem to be any extensions affecting this. Thanks!

Is that about searching via the build-in the about:home page?
Reset the browser.startup.homepage_override.mstone pref via the right-click context menu to the default on the about:config page and close and restart Firefox to restore the about:home page to its default.
*http://kb.mozillazine.org/about:config
#Open the about:config page via the location bar
#Type in the Filter bar: mstone
#Right-click the browser.startup.homepage_override.mstone line and select: Reset
#Close and restart Firefox
If this didn't help then delete the delete the chromeappsstore.sqlite file in the Firefox Profile Folder and repeat the above.

Trouble with format of files exported from pages as .doc - when opened on a pc they have extra spaces and pages breaks inserted after each line? Can be manually deleted, but defeats sharing purpose. advice?

Hi all, I have trouble with the format of files exported by email as .doc from pages - when opened in MS word on a PC or other device, they have extra spaces and pages inserted after each line - can be deleted manually, but defeats sharing purpose. Any advice? Not the most sophisticated user.

Got it. I tried booting with MOD_AUTOLOAD set to yes, and it was working fine. Looks like I needed to specify some more modules in my list.

ITunes deletes all music from my iPhone 6 when I sync

Just now when I tried to add some new music to my Iphone 6 (iOS 8.1.3) the songs appeared greyed out, but won't actually copy. When I hit the Sync button, steps 1-5 happened in a matter of seconds and then all the music (about 100gb) went offline - showing the ! next to each track. Further Sync attempts did the same super-fast 1-5 steps without actually doing anything.
This is not the first time this has happened, and it takes over an hour to copy all the files back to my phone. Please help!
Zach

Howdy Luna527,
You’ll have have change the Sync Music settings in iTunes, to delete the music from your iPhone and stop it from being synced back on to it when you connect it to your MacBook, as shown in the article linked below.
Sync your iPhone, iPad and iPod with iTunes using USB - Apple Support
Cheers,
-Jason

Images not displaying when open in Dreamweaver

Hi, my images on the page
oldfortestates.com/about_st.vincent.htm do not display properly
when open in DW however they do on the server when opened with a
browser. They are stored in the images folder in the site root. I
have this problem with all my pages...

Going back to my original comment, if you change the name
http://oldfortestates.com/images/table_bck1.JPG
(File Not Found)
to
http://oldfortestates.com/images/table_bck1.jpg
the image is there.
> However, how should I ever get all those errors fixed.
Isn't it easier to
> just make a new page.
If it were me, yes, I would start over.
>Is there a quick way for me to just create an exact copy
of my pages in a
>template page where I can after just copy and paste all
the different page
>infos into.
I am far from being the best person to give advice, I would
steer clear of
javascript menus for a start - they don't work with
javascript turned off.
There are many good ones recommended here,
www.projectseven.com and others
Start with a clean page and investigate Server Side Includes
with a good
menu (see many recommendations here) or, as you suggest (you
don't have many
pages), a template.
Make sure you save the template File > Save As Template.
>then rename the individual pages
No, create child pages from the template, giving them names.
I wouldn't
rename anything you already have, the code is... bad.
Check out your validation errors to make sure you don't
repeat your
mistakes.
You'd be wise to look at
http://www.w3schools.com/ for
HTML and CSS.
As I said, I'm not the best person to help but hope this does
a bit.
Jo
"atomic king" <[email protected]> wrote in
message
news:gjoqqr$nk5$[email protected]..
> Thanks so much Joise1 I will try to see if I can get
that image to work.
> However, how should I ever get all those errors fixed.
Isn't it easier to
> just
> make a new page. Is there a quick way for me to just
create an exact copy
> of my
> pages in a template page where I can after just copy and
paste all the
> different page infos into and then rename the individual
pages. What do
> you
> think?
>

PDF exported from InDesign missing background when opened in Illustrator

Hello, I am having a bit of a frustrating problem.
I'm working on graphics for a large project, and I have to get some of my files from InDesign into Illustrator (they are both CS5) for our printer.
I would have normally designed them in Illustrator but ALL my graphics are in InDesign and we just found out once we started on production that he needs AI and needs our trim path set up for our irregular shapes.
For MOST of the documents, its been pretty easy (exporting to PDF > opening in illustrator and making a cut path > saving as AI) however I have this one file that is making me lose my mind.
When I export it as PDF, it opens perfectly and looks normal in acrobat, and I also check it out in preview as well. The background shows up and everything. However when I open the PDF in illustrator it completely loses the background. I noticed it doing this before for a couple graphics, but I assumed that was because they had gradients drop shadows and transparencies and all that. This file has nothing weird except for a gradient grey background.
Help? I'm including some screenshots of whats happening in the hopes that you guys can help solve it.
So here we have me saving it, then opening it in Acrobat to check stuff out.
Now here is what happens when I open it in Illustrator:

Hi, Brie. I have been running into this issue for quite some time now. I also received the same response as you did. "Stop opening exported PDFs in Illustrator." This is an unsatisfactory answer for someone that works in the large format print industry that needs to preflight directly in the Illustrator program. I've done a ton of research and have been racking my brain for the last 2 years and have finally found sufficient workarounds for this issue. The downfall with these workarounds: all spot colors located in the gradients will convert to CMYK mixes. I'm still researching to see if there is a way to keep spot colors intact in these areas.
A little back story: InDesign is converting the gradients into something called NChannel. It enables more accurate handling of color blending by including additional dot gain and color mixing info. Both InDesign and Acrobat have the ability to display these elements whereas Illustrator, from what I’m finding, does not. Which is why we’re seeing gradient elements drop out when opened in Illustrator.
Workaround for CMYK Gradients
Open PDF exported from INDD in Acrobat
Go to Tools > Print Production > Convert Colors
Object Type: Smooth Shade (this tells Acrobat to hone in on Gradients only)
Color Type: DeviceCMYK
Check Embed next to Conversion Profile (should be SWOP)
Expand Document Colors on the right and Select DeviceCMYK in Color Spaces then click ok
Save the PDF
Workaround for 1 Spot Color in Gradients (Converts Spot Color located in Gradient to CMYK – all other Spots stay intact)
Open PDF exported from INDD in Acrobat
Go to Tools > Print Production > Convert Colors
Object Type: Smooth Shade (this tells Acrobat to hone in on Gradients only)
Color Type: Spot Color
Check Embed next to Conversion Profile (should be SWOP)
Expand Document Colors on the right and Select the Spot that is located in the Gradient in Color Spaces then click ok
Save the PDF
Workaround for 2 Spot Colors in Gradients (Converts Spot Colors located in Gradient to CMYK – all other Spots stay intact)
Open PDF exported from INDD in Acrobat
Go to Tools > Print Production > Convert Colors
Object Type: Smooth Shade (this tells Acrobat to hone in on Gradients only)
Color Type: Spot Color
Check Embed next to Conversion Profile (should be SWOP)
Expand Document Colors on the right and Select the DeviceN spot color that is located in the Gradient in Color Spaces then click ok
Save the PDF
Please try this and let me know if you have any questions! I'm always looking for new problems to solve! Good luck!
- Jenny

Black display when opening iBookG4 after sleep

Occasionally the display will remain black when opening from closed while sleeping. After some repeats it kicks in again.
Could it (after 5 years) be a failure of the switch that is activated by opening?

Steven,
Could it (after 5 years) be a failure of the switch that is activated by opening?
Yes, actually it's a reed switch that's activated by a magnet when you close the display. They can actually break or get flaky and the display will do what you describe.
You might try resetting the PMU since it controls sleep:
http://support.apple.com/kb/ht1431
Otherwise you could disconnect the reed switch. In this model it's under the main deck to the right of the keyboard.
It connects to a socket just foreword and right of the RAM slot so you might be able to disconnect it through the RAM access port. It has a red and black wire.
Be careful doing this as it's easy to damage the board.
Richard
Richard

#VALUE! displayed when opening Offline documents with BPC logged on

SITUATION
The offline documents (by using Park N Go) open fine in Excel, though, when these documents are opened after logging on to BPC, cells display #VALUE! instead. This gives my users a hard time opening distributed reports when they are in BPC session
DATA
Macro IS enabled when opening these offline documents
We are on Office 2007 and BPC 5.1 & BPC 7.0. This particular issue occurs to both versions of BPC
Please let me know if you have a workaround, or this is a bug? Thank you!
Sincerely,
Brian Hsu

Hi Brian,
I can suggest you 2 things.
1. Before doing the offline distribution, go to the template, go to workbook options and select the boxes for expansion and refreshing workbook, when opened / when CV is changed. Save this template and then do the "park n go".
2. When the saved offline file is opened, this time you should not get #VALUE. If you still get the same values, then go to "park n go" and click on "set to live data and live current view".
Hope this helps.

.RFTD attachment from gmail is illegible when opened

I'm trying to open an .rtfd attachment from an old gmail. It's a file that contains part of a facebook conversation that I copied onto TextEdit and emailed. I want to open the file again, but when I download from gmail and try to open I get the msg "there is no application set to open the document". I've opened it using root .txt and others but the text gets scrambled and illegible each time and its driving me nuts. ex. # "$!@%! . Is there a way to decode or fix this so I can read the text like normal?

Hello Melianos,
What application do you use for opening emails with attachments? What code do you use? Could you please be more specific?

Swf saved as pdf not displaying when opened

Hi All,
I am in the process of creating a media kit for my company. The plan is to be able to send out a link to the pdf file saved in our site files so that potential clients can click and view or download the pdf. I have saved the pdf in my site files however; when you go to the link (http://www.hobnobtv.com/pdf/hobnobtv-media-kit.pdf) it only opens a white blank pdf file.
Here are the steps i've taken to create the file:
I have created the 10page booklet using InDesign CS4 and added the page turn page transition on all the pages.
I exported the file as swf and then opened the swf in Adobe Acrobat 9 Pro.
When opening the swf in Acrobat the activation setting I choose are:
Enable when: The page containing the content is opened
Disable when: The page containing the content is closed
Save the pdf file
Uploaded to the site
What could be causing the pdf to appear white and blank? Is there a better way to accomplish the goal?
I look forward to hearing others thoughts!
Rebecca

Thank you for the response!
Actually, I finally realized (and i'm a little embarassed to admit) that when I click on the link for the pdf, my default program to open the file was set to Preview rather than adobe acrobat or reader. So now that I have it set to Acrobat I see it ok.
I have tested the swf file by itself and it does work. The file uses the Page Turn transition affect, so the user needs to click the bottom right corner of each page to turn (or they can click and drag the page open). I did notice when the pdf was opend the little note I included in the bottom right of the first page does not show (it reads "click here to turn page"- as a prompt for the user). I may have to move that up a little bit so it shows. Also, if you hover over the bottom right corner of the right page, you should start to see the page corner curl, this is hard to see at this point (you can see it great if you click the zoom in option once) Maybe i'll have to reduce the size of the swf when making it a pdf to see if that works so the user doesn't have to adjust the page to see the affect.
I'll see how that works.
Rebecca

How can I delete catalog entries from PSE 8 Organizer when it's photo does not appear in the brower?

I imported a group of files into Folder A, and Organizer correctly gave me the "new files in watched folders" pop-up and imported them. Then I used Windows to copy these files into Folder B, also a watched folder. Again, Organizer correctly gave me the "new files in watched folder" pop-up, BUT did not show the imported files in the browser, despite Show All, etc. I used Windows to delete all of the files in Folder B, then tried to re-import them. Organizer says "no files imported, because they already exist in this folder." Apparently the files are registered in the catalog, even though they aren't physically there. How can I delete these from the catalog when there's no photos in the browser I can click and say "delete from catalog"?

DaveinNC wrote:
Yes, that's exactly the message I get, except that below what you've shown above, Organizer then lists all of the files individually, each with the phrase "cannot import because image is already in the Catalog."
In my PSE6, I get only the message shown, without the list of individual files.
DaveinNC wrote:
I tried your procedure. Organizer began a lengthy search, and did not list the missing files. It seemed to me Organizer was attempting to locate physical files that are referenced (included) somewhere in the Catalog, but whose location it no longer knows. (I think these are the ones that Organizer displays with a "?" in the corner of the image.) It's as though Organizer seems to think the files I deleted in Folder B are actually not missing, even though they really are.
There, I believe you are right. Reconnecting missing files is usually quick enough, even with large catalogs. If the reconnect procedure has failed, there must be other problems than the deletion of files outside the organizer. Try a catalog repair and see if the reconnect procedure works.

I have a iphone 4s and i deleted several contacts from my phone but when i go to meassage a different contact that old contact i deleted weeks ago shows up how do i get the deleted contact info off my phone and out of the memory.

How do u delete old contacts that have been deleted from my phonebook on my iphone4s. The old contacts continue. To show up when i go to message someone they pop up from memory.

Is there a blue arrow beside those numbers when they appeared?

An unusual app's display when open the apps after airplay mirroring off

have this happens to anyone.
im just noticed this happend on my macbook after upgrade the mountain lion and using a lot of airplay mirroring...
so im gonna show u the images...
1. first image
this is (first image) happens after i used the airplay mirroring. to get the display to normal again when looking the apps, i have to restart my macbook.
2. second image
on the second image, its back to normal display after i restart my macbook. after that, its happens again after i used the airplay mirroring.
im just wondering, if i used a lot of numbers times airplay mirroring, doest it will demage my macbook's screen? is that happens to anyone.
seems like airplay mirroring got a lot of issues on my macbook (i like to testing all the features on mountain lion).

Hey everybody i found this on other forum.
"Do the following:
options>device>application management
choose blackberry app world
select delete
restart
on restart, send browser to:
http://rroyy.com/ota/
reinstall old version of blackberry appworld
in my case BlackBerry App World v3.1.0.60 (OS6), no more freezing, all good."
Worked for me ;D

Oops! deleted the hd from the left display when opening the hd

Similar Messages

Maybe you are looking for