Oops. I just pressed something and can't see my pen points anymore. please help!!!!

A lot of times when I work in illustor I press some key command and my pen points become invisible, I can't see them along the line. If I randomly select the line, a point will show that I selected. but not others. It is crucial for me to figure this out now, because I have an extremely tight deadline for this project.
Thank you!

it's more like I can't select my drawing.......

Similar Messages

  • So I forgot the password to my phone and my power button just broke so I can't dfu mode or anything. Please help!

    So I forgot the password to my phone and my power button just broke so I can't dfu mode or anything. Please help!

    Hello Zpower,
    It sounds like you have forgotten the passcode lock on your phone. The following article will help you get that reset named:
    iOS: Forgot passcode or device disabled
    http://support.apple.com/kb/ht1212
    Thank you for using Apple Support Communities.
    Cheers,
    Sterling

  • I sign up for TAPJOY.While signing in,they install something in my PROFILE CONFIGURATION...When I check my Settings-General,I can't see the PROFILE OPTION! Please help me :) Im running ios 6.0.1

    I sign up for TAPJOY.While signing in,they install something in my PROFILE CONFIGURATION...When I check my Settings-General,I can't see the PROFILE OPTION! Please help me Im running ios 6.0.1

    Well, after another call with Apple support and the engineers, no success.  After spending over 20 hours trying to debug this, I give up.  Apple was basically fishing for a solution with trial-and-error settings on the iphone.  Then they wanted me to plug in software to log my iphone connections to the router, etc, etc., etc., at which point I decided I no longer wanted to participate in their testing process and will simply return the router.
    25 hours of my life I'll never get back.
    Big bummer, and frustrating for all the obvious reasons.

  • My iphone 3g hang when i lock it and just shows white and red verticle lines on the screen . . please help me out

    my iphone 3g hang when i lock it and just shows white and red verticle lines on the screen . . please help me out

    Try resetting > 
    Hold the On/Off Sleep/Wake button and the Home button down at the same time for at least ten seconds, until the Apple logo appears.
    If that doesn't help, try restoring >  Backing up, updating, and restoring your iPhone, iPad, or iPod touch software

  • HT1339 After i Updated itunes al my ipod apps including safari and music, photos and all of them went away and i cannot do anything on it anymore please help?

    After i Updated itunes al my ipod apps including safari and music, photos and all of them went away and i cannot do anything on it anymore please help?

    - Try a reset. Nothing is lost:
    Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Can you find the apps using the Spotlight search on the iPod? Maybe you just can't find them
    - If you can find them you can reset the screen layout by go to Settings>Genera.Reset>?Reset Screen Layout.
    - Restore from backup
    - Restore to factory settings/new iPod.

  • If my mom wants my Apple ID(I have no idea why), if she logs in on either her iPhone or our Mac can she see my IMessages ?? Please help ASAP!!!

    If my mom wants my Apple ID(I have no idea why), if she logs in on either her iPhone or our Mac can she see my IMessages ?? Please help ASAP!!!

    Yes, if she has your Apple ID & Password, she can see any messages that are sent to you as iMessages using another iOS device.

  • TS1369 itunes no longer sees my devices. But I can still see them in windows. Please help

    itunes no longer sees my devices. But I can still see them in windows. Please help

    Try
    iOS: Device not recognized in iTunes for Windows
    I would start with               
    Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
    or               
    Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
    New cable and different USB port?
    Runs this and see if the results help with determine the cause
    iTunes for Windows: Device Sync Tests
    Try on another computer to help determine if computer or iPod problem

  • HT1539 I JUST DOWNLOADED A DIGITAL COPY OF FROZEN ONTO ITUNES AND CAN'T FIND IT.  WOULD YOU PLEASE HELP ME!

    Hello
    I just purchased a copy of the movie Frozen and it came with a digital copy.  I can not find it in my movies.  would you please help me!

    Are you there?

  • How do I view my iCloud backup?? I have tried for a week and can't seem to get it. Please help!

    I don't understand how I can view my backups.
    Please help! I have lost soooo much from my phone and
    I want to see what I have stored on iCloud. How the heck do
    I do it? Lol It's literally driving me crazy!

    It isn't possible to see the individual files included in your backups if that's what you mean.  You can only see what you have elected to include in the backup (in Settings>iCloud>Storage & Backup>Manage Storage...tap your device under Backups, then look under Backup Options), but not to see the actual data.
    The backup will include (from http://support.apple.com/kb/PH12519):
    Photos and videos in your Camera Roll
    Device settings
    App data
    Home screen and app organization
    iMessage, text (SMS), and MMS messages
    Ringtones
    Visual Voicemail

  • I downloaded the new iphoto and the upgrade and now iphoto will not open correctly anymore. please help

    I downloaded the new iphoto and the upgrade and now iphoto will not open correctly anymore. it stays on the opening screen and the message
    shows up that I must update the mediathek. If I click on update the program shuts down. How can I fix this?

    I downloaded the new iphoto and the upgrade
    Does that mean, you are running iPhoto 9.6 on MacOS X 10.10.1 Yosemite? Or are you using an older MacOS X? "New" iPhoto is relative and depends on your system.
    If I click on update the program shuts down. How can I fix this?
    Does "shut down" mean it crashes?  Then post please the error log from the error panel here - copy and paste the report into your next answer (the first 50 lines should suffice)
    Where is your iPhoto Library (Mediathek) stored? Have you moved it to an external drive, or is it still in your Pictures folder (the order "Bilder")?

  • I've just purchased CC and can't download the creative cloud app? Help would be appreciated! :)

    I can't download the Creative Cloud App?
    After purchasing CC Complete, it says to click here to download the app and it just takes me to a white page with the four loading squares that just keep circling.
    If necessary to know, I have a MacBook Pro and great internet connection.

    Hi,
    Here is the download page :
    https://creative.adobe.com/products/creative-cloud?
    If you still not have access to this page ,check and clean you hosts as explained in step 3:
    Sign in, activation, or connection errors | CS5.5 and later
    Regards,

  • Blocked account, and can't update credit card. Painful - please help!

    My account is now blocked, after making a payment on June 11th.  Cannot email or call support.  Any help or ideas? Bob

    rdubuque wrote:
    Any help or ideas?
    Hello and welcome to the Skype Community.
    Checking for you.
     

  • OMGosh, alarm clock woke me up 8 am and I cant shut it off, just keeps going and going, how do I shut it off please help???  Thx

     

    When the alarm is going at the bottom of your screen there will be a line with dismiss on the left and an arrow heading to theright. You have to sweep that arrow to the right for the alarm to be dismissed and finally stop. Don't feel bad the same
    thing happened to me. The first few days I went to the app alarm and turned it off from there until on about the third day
    I finally noticed the dismiss arrow.

  • Can't boot into 10.5 anymore, please help

    So the unthinkable happened and water spilled onto my MacBook. I quickly shut it off and let it dry out. When I booted again a few day later it comes up to a blue screen, the mouse appears and then it goes to a light blue screen with a spinning gray pinwheel. I tried to boot of my Install DVD but it appears not to be working. When I hold down 'C' at power on, nothing happens. When I try the "option" button aproach I only see a MacHD icon. The CD spins, but dosn't apear to read.
    Any one have any ideas on how I can restore my Mac from Single-User mode? I already tried the fsck with no luck (says everything is OK).
    *UPDATE:
    1)Went into single-user mode
    2)Mount -uw /
    3)Typed "fsck" from root
    4) Reply was below:
    **Root File System
    **Verifying volume when it is mounted with write access
    **Checking Journaled HFS Plus volume
    Volume is journaled. No Checking performed
    Use the -f option to force checking
    ***FILE SYSTEM WAS MODIFIED***
    **REBOOT NOW**
    /dev/rdisk0s2 (hfs) EXITED WITH SIGNAL 4
    Did a imediate fsck -fy, results below:
    **Root File System
    **Verifying volume when it is mounted with write access
    **Checking Journaled HFS Plus volume
    **Checking Extents Overflow File
    **Checking Catalog file.
    Incorrect number of thread records
    (4, 33360)
    Incorrect number of thread records
    (4, 33360)
    Invalid Leaf record count
    (It should be 1958466 instead of 1958478)
    **Checking multi-linked files
    **Checking Catalog hierarchy.
    Invalid directory item count
    (It should be 12 instead of 24)
    Invalid volume directory count
    (It should be 186728 instead of 186729)
    Invalid volume file count
    (It should be 792495 instead of 792497)
    **Checking Extended Attributes file.
    **Checking volume bitmap.
    Volume Bit Map needs minor repair
    **Checking volume information.
    Invalid volume free block count
    (It should be 5143549 instead of 5143366)
    Volume Header needs minor repair
    (2, 8)
    **Cannot repair volume when it is mounted with write access.
    **The volume Macintosh HD could not be repaired
    ***FILE SYSTEM WAS MODIFIED***
    **REBOOT NOW**
    /dev/rdisk0s2 (hfs) EXITED WITH SIGNAL 4

    I was hoping you had a cloned backup of your internal drive, but it sounds like you don't. You're kind of up a creek without being able to boot from your CD drive either. You can't even reformat the drive at this point. If you can get your hands on an external USB burner, you could boot from your install disk and reformat the drive or run DiskWarrior from there. Even that may not work though if your logic board has a problem and the USB ports are out. You can see how important a bootable backup is for emergency troubleshooting now.
    Dave M.
    MacOSG Founder/Ambassador  An Apple User Group  iTunes: MacOSG Podcast
    Macsimum News Associate Editor  Creator of 'Mac611 - Mobile Mac Support'

  • I have iphone 4s and just bought an ebook for ibook, trouble is the font is so tiny I can't read it and the font sizer is not working? Please help!

    Hi, I have the  iphone 4s and just bought an ebook for ibook, trouble is the font is so tiny I can't read it and the font sizer is not working? Please help!

    Hello Glittergirl68,
    Thank you for using Apple Support Communities.
    It sounds like the function to reseize the Font in an iBook is not functioning properly.
    I recommend a few things here. First close all the apps that are running in the background:
    Double-click the Home button.
    Swipe left or right until you have located the app you wish to close.
    Swipe the app up to close it.
    From: iOS: Force an app to close
              http://support.apple.com/kb/ht5137
    When you have done that, restart the phone, and try again.
    If the issue persists, I would follow these steps from the article:
    iOS: Troubleshooting apps purchased from the App Store
    http://support.apple.com/kb/TS1702
    2. Check for app updates
    You can setup apps to update automatically in Settings > iTunes & App Store, but make sure that your apps are up to date:
    Open the App Store and tap Updates. If updates are available, tap Update All.
    If  prompted, enter your iTunes Store account information. App Store will then download and install the app updates.
    Note: Some apps may require a Wi-Fi connection to update.
    3. Install another app from the App Store
    If none of your user-installed apps will launch, there could be an issue with Apple ID authorization. Download and install an app that isn't already installed on your device to reset this information. You can also remove an app from your iOS device and download it again from the App Store or sync the app from your computer.Note: If you have installed apps using multiple Apple ID accounts, you may need to perform this step for each account.
    4. Restart the app
    If the issue affects only a single app, try closing just that app.
    5. Restart your device
    Turn the device off and on.
    6. Reinstall the affected app
    Remove the app from your device and reinstall it:
    Tap and hold any app icon on the Home Screen until the icons start to wiggle and show a small "x" in the top-right corner of the app.
    Tap the "x" in the corner of the app you want to delete.
    Tap Delete to remove the app and all of its data from your device.
    Press the Home button.
    Go to the App Store.
    Search for the app and then download it again.
    All the very best,
    Sterling

Maybe you are looking for

  • I need help! I need to file a complaint, but have no idea how.

    So I am 17 years old, and my mom got me a phone in November because my old phone broke. When we went into the store the guy who sold it to us ripped us off. He told me that we would only have to pay $20 every month for a year if we didn't do the two

  • Images in dashboard after deploying obiee 10g in weblogic server

    Hi, We have deployed OBIEE 10g in weblogic server at the location E:\BIDEP Initially for OC4j server we placed the images in two places: +1. E:\OracleBI\web\app\res\s_oracle10\images+ +2. E:\OracleBI\oc4j_bi\j2ee\home\applications\analytics\analytics

  • CRT results are not appearing after successful payroll run

    CRT results are not appearing after successful run of US payroll, however, RT results are appearing. Please suggest ideas to find the results of CRT.

  • Re : Multiple Workitem Execution

    Hi ,        I'm using sap 4.7  and created a workflow for plant wise material release . I would like to execute multiple workitems in one go.  Just gone thru postings in SDN ,  SAP Help  and  i could not able find much information on this topic. Do w

  • My mac no longer saves its state when the battery runs out.. ??

    Earlier when My mac drained it's battery & was not plugged in, it would give me a warning then save it's state & shut down.... Now 1 1/2 years into my Macbook Pro 17" intel it turns off but doesn't save my state, so anything not saved is lost.. (basi