"Oops, please check your details" - Modern Skype

I recently bought a new laptop with Windows 8.1 and was furious that I needed to have a windows account to use the "Modern Skype" feature, so I downloaded desktop Skype and it started crashing every time I used it, and would then tell me I couldn't log in because I already was on that computer (even after I ended the task, shut down, ect.).
So I now have re-downloaded Skype from the windows store and when I tried to log in using a Skype name, Skype said "Oops, please check your details". I can log in fine on my phone, on the Skype website, even on other computers, but for some reason not the actual app on this device.
As I said, this happened on desktop version but only on this device, I tried changing the password, nothing.
Anyone who can help?
Thanks.

Try to reset all Skype settings (for the desktop version).
Quit Skype or use Windows Task Manager to kill any Skype.exe process. Go to Windows Start and in the Search/Run box type %appdata% and then press Enter or click the OK button. The Windows File Explorer will pop up. There locate a folder named “Skype”. Rename this folder to something different, e.g. Skype_old.
Next go to Windows Start and in the Search/Run box type %temp%\skype and then press Enter or click the OK button. Delete the DbTemp folder.
Restart Skype.
N.B. If needed, you will still be able to re-establish your call and chat history. All data is still saved in the Skype_old folder.

Similar Messages

Can't login on my Android phone: "Oops, please check your details".

Hi all, I have created a new plain Skype account yesterday. I works fine on my laptop, where I can sign in without any problems. However, on my Android phone I just get the error message "Oops, please check your details" and Skype keeps showing the login screen. Password and username that I enter are definitely correct. With my old plain Skype account I can login on my Android phone (and laptop) without any problem. I have already force stopped the Skype app, cleared the data, uninstalled and reinstalled it. I have also made sure that I wasn't logged in on my laptop. The only apparent difference seems to be the hyphen (minus sign) in my new Skype name. Might this cause the problem? My setting:Alcatel One Touch 997d w/ stock Android 4.0.4 & WiFi (home network), Skype v3.0.0.6181 Thanks very much for your help,
Dom

Oh, I have to update my story. I spoke too soon in my earlier post . Only after about a few days, or something like a week, the error came back again. And I'm QUITE certain that after changing the password, it would work again! (again.) And yes it makes me think special charcaters are not really the problem, but that 'whatever' the problem is, resetting your password seems to provide TEMPORARY relief! I haven't bothered to update my password since this second failure, because of the hassle of updating it on more than 3 devices I own. I have been missing out, no skype on my android phone. This i a real bug. there hasn't been an android updates for months (more than a year? I don't know), why aren't devs acknowledging and looking into this?...

Oops Please Check Your Details.

Hi ..After Update Skype i Login My Account On My Samsung Galaxy Note3 Neo , I Got This Error (Oops Please Check Your Details.) But i am able to login through my laptop with same user id and password...kindly help me out to fix this issue..
DeviceMaker>Samsung
Device Name>Samgung Galaxy Note3 Neo
Model>SM-N7505
Android OS version>4.3 Official
Build number >JSS15J.N7505XXUANB1
Network>Zain SA
Skype client version installed>5.0.0.49715
Attachments:
Screenshot_2014-08-02-06-08-57.png ‏44 KB
Screenshot_2014-08-02-06-09-58.png ‏106 KB

If anyone of you is trying to sign in to Skype for Android with their Facebook login and using a "Skype name" starting with "facebook:...": This will always fail since signing in via Facebook is not supported on Skype for Android. You would need to create a new Skype account to use on Skype for Android, I'm afraid: https://support.skype.com/en/faq/FA10184/how-do-i-join-skype
For all the others: Are you trying to sign in using a Skype name or a Microsoft account?
Follow the latest Skype Community News
↓ Did my reply answer your question? Accept it as a solution to help others, Thanks. ↓

Hi can anyone help i bought modern combat 5 blackout and everytime i run it i get an error saying please check your internet connection and try again ,it will not connect has anyone got a solution pls

hi can anyone help i bought modern combat 5 blackout and everytime i run it i get an error saying please check your internet connection and try again ,it will not connect has anyone got a solution pls

use it on a diffrent network if u dont have a mc donalds or sone other place to test it most librarys have wifi just to make sure its not that if its not the wifi falut and the app has been re installed may be a bug since this game is still pretty new

Error: "AppStore could not process your request. Please check your AppStore account details

Error: "AppStore could not process your request. Please check your AppStore account details"
I changed my card details for my apple id since then i have been getting this error mesg whenever i try to download a paid app - or make payments for existing apps.
I created a new apple id and tried using that- but the error still pops up.

I believe that something is wrong with the App Store on Apple's end.
My issue is that my purchase history is completely blank when it shouldn't be.
I believe it's an issue on Apple's end because the same thing occurs on other iPads in the house & on my iPhone.
Sorry I can't be of more help, I'd just say wait it out.
-Chris

You cannot signed in at this time please check your mobile network setting and try again..

Please help me i can't login in skype...my phone is android the brand is oppo and the model is joy plus...my problem is i can't login in skype...when ever i login it's always says YOU CAN'T SIGNED IN AT THIS TIME PLEASE CHECK YOUR MOBILE NETWORK SETTING AND TRY AGAIN......please help me...somebody who can help me...please what will i do?

Hi! We tested the issue on HTC ONE M8 device and couldn’t reproduce the issue ourselves. Did you experience the issue while you logged in the first time after installing Skype on your device? Could you please give more details about this issue – exact steps how to reproduce that, Skype version number, exact OS version, network type? You can find more details about specifics we need to know from here: http://community.skype.com/t5/Android/How-to-create-a-good-Android-issue-report/td-p/211384.

TS4268 After the update I am unable to log in to get iMessages. It says "Could not sign in. Please check your network connection and try again". My phone is connected to Wi-fi. What should I do?

After the update I am unable to log in to get iMessages. It says "Could not sign in. Please check your network connection and try again". My phone is connected to Wi-fi. What should I do?

Hi andrea110,
Welcome to the Support Communities!
The article below may be able to help you with this issue.
Click on the link to see more details and screenshots.
The settings are the same for iOS 7:
iOS 6 and OS X Mountain Lion: Link your phone number and Apple ID for use with FaceTime and iMessage
http://support.apple.com/kb/HT5538
iOS: Troubleshooting Messages
http://support.apple.com/kb/TS2755?viewlocale=en_US
Cheers,
- Judy

Virtex6:Configuration data download to FPGA was not successful. DONE did not go high, please check your configuration setup and mode settings

Hello，everyone.
I am using virtex6 FPGA and trying to download mcs file to PROM and have failed.
I download .bit file to FPGA and succeed.
When i try to download .mcs file to PROM XCF128X-FTG64C(BPI Flash) and choose Slave SelectMAP Mode
and the process is about 68% it fails.
The message below the IMapct is as belows:
done.
PROGRESS_END - End Operation.
Elapsed time =      0 sec.
// *** BATCH CMD : identifyMPM
// *** BATCH CMD : assignFile -p 1 -file "C:/Users/Administrator/Desktop/TEST/LED/led.bit"
'1': Loading file 'C:/Users/Administrator/Desktop/TEST/LED/led.bit' ...
done.
INFO:iMPACT:2257 - Startup Clock has been changed to 'JtagClk' in the bitstream stored in memory,
but the original bitstream file remains unchanged.
UserID read from the bitstream file = 0xFFFFFFFF.
INFO:iMPACT:501 - '1': Added Device xc6vlx240t successfully.
INFO:iMPACT - Current time: 2014/3/13 8:48:14
// *** BATCH CMD : Program -p 1
PROGRESS_START - Starting Operation.
Maximum TCK operating frequency for this device chain: 66000000.
Validating chain...
Boundary-scan chain validated successfully.
INFO:iMPACT - 1: Over-temperature condition detected! [ 230.52C > 120.00C]
1: Device Temperature: Current Reading: 230.52 C, Max. Reading: 230.52 C
1: VCCINT Supply: Current Reading:   2.997 V, Max. Reading:   2.997 V
1: VCCAUX Supply: Current Reading:   2.997 V, Max. Reading:   2.997 V
'1': Programming device...
Match_cycle = NoWait.
Match cycle: NoWait
LCK_cycle = NoWait.
LCK cycle: NoWait
done.
INFO:iMPACT:2219 - Status register values:
INFO:iMPACT - 0011 1111 0111 1110 0100 1011 1100 0000
INFO:iMPACT:579 - '1': Completed downloading bit file to device.
INFO:iMPACT:188 - '1': Programming completed successfully.
Match_cycle = NoWait.
Match cycle: NoWait
LCK_cycle = NoWait.
LCK cycle: NoWait
INFO:iMPACT - '1': Checking done pin....done.
'1': Programmed successfully.
PROGRESS_END - End Operation.
Elapsed time =     23 sec.
Selected part: XCF128X
// *** BATCH CMD : attachflash -position 1 -bpi "XCF128X"
// *** BATCH CMD : assignfiletoattachedflash -position 1 -file "C:/Users/Administrator/Desktop/TEST/LED/leda.mcs"
INFO:iMPACT - Current time: 2014/3/13 8:49:32
// *** BATCH CMD : Program -p 1 -dataWidth 16 -rs1 NONE -rs0 NONE -bpionly -e -v -loadfpga
PROGRESS_START - Starting Operation.
Maximum TCK operating frequency for this device chain: 66000000.
Validating chain...
Boundary-scan chain validated successfully.
INFO:iMPACT - 1: Over-temperature condition detected! [ 230.52C > 120.00C]
1: Device Temperature: Current Reading: 230.52 C, Max. Reading: 230.52 C
1: VCCINT Supply: Current Reading:   2.997 V, Max. Reading:   2.997 V
1: VCCAUX Supply: Current Reading:   2.997 V, Max. Reading:   2.997 V
'1': BPI access core not detected. BPI access core will be downloaded to the device to enable operations.
INFO:iMPACT - Downloading core file D:/Xilinx/14.3/ISE_DS/ISE/virtex6/data/xc6vlx240t_jbpi.cor.
'1': Downloading core...
Match_cycle = NoWait.
Match cycle: NoWait
LCK_cycle = NoWait.
LCK cycle: NoWait
done.
INFO:iMPACT:2219 - Status register values:
INFO:iMPACT - 0011 1111 0111 1110 0100 1011 1100 0000
INFO:iMPACT:2492 - '1': Completed downloading core to device.
Current cable speed is set to 6.000 Mhz.
Cable speed is default to 3Mhz or lower for BPI operations.
Current cable speed is set to 3.000 Mhz.
Setting Flash Control Pins ...
Setting Configuration Register ...
Populating BPI common flash interface ...
Common Flash Interface Information Query completed successfully.
INFO:iMPACT - Common Flash Interface Information from Device:
INFO:iMPACT - Verification string: 51 52 59
INFO:iMPACT - Manufacturer ID:        49
INFO:iMPACT - Vendor ID:             01
INFO:iMPACT - Device Code:           18
Setting Flash Control Pins ...
Using x16 mode ...
Setting Flash Control Pins ...
Setting Configuration Register ...
'1': Erasing device...
'1': Start address = 0x00000000, End address = 0x008CE03B.
done.
'1': Erasure completed successfully.
Setting Flash Control Pins ...
Using x16 mode ...
Setting Flash Control Pins ...
Setting Configuration Register ...
INFO:iMPACT - Using Word Programming.
'1': Programming Flash.
done.
Setting Flash Control Pins ...
'1': Flash Programming completed successfully.
Using x16 mode ...
Setting Flash Control Pins ...
Setting Configuration Register ...
'1': Reading device contents...
done.
'1': Verification completed.
Setting Flash Control Pins ...
Current cable speed is resumed to 6.000 Mhz.
'1': Configuration data download to FPGA was not successful. DONE did not go high, please check your configuration setup and mode settings.
`Elapsed time =    814 sec.
and i find many people have met the same thing. But they are spartan series FPGA and i try to low the Resistances of Mode pins,M0 M1 and M2, but the problem does not been solved.
I have read the status Registers and find there is an over-temperature state
and in Impact i could not readback the registers. It is strange.
I am anxious about this problem and have not solved it yet
What reasons may it be?
Hope for your answer, thank you

Hi~I want to know if you solve the configuration problem for virtex-6?
As I encounter the  same configuration problem, I want to consult  you with some question.
Can I have your email?
gszakacs wrote:
I have measured the VCCINT and find it is 1.0V, not 2.997V;
That is not at all surprising. I always assumed the problem is with reading the XADC (system monitor) block and not with the voltage or temperature.
my Reference board is ML605
That would have been nice to know at the beginning...
It seems that you have selected the correct mode, assuming your jumpers are set as required in the ML605 Hardware User's Guide. See table 1-27, table 1-33 and the note below it about switch S1.
I'm not that familiar with the details of this reference design, but it may be that the slave SelectMap circuitry requires a reset or power cycle to actually configure the FPGA. Have you tried power-cycling to see if the FPGA boots from the flash?
I'd also suggest that you select the V6 in the JTAG chain view, then go to the debug menu of Impact and select Read Device Status (this is from memory, but it's something like that). That will not only show the bits of the configuration status register, but also describe what each bit means. Among other things you can check the state of the FPGA's configuration logic and the Mode pins.

Sorry there was a problem checking your details.

Hi,
When I go to run the broadband speed test on the BT website it says. Thought it was the website at first as it started doing this the other day.
Sorry there was a problem checking your details. Please check you have entered the correct telephone number and then press 'Start Test' again.
Then this:
Sorry, but we've not been able to match all of your details
You can continue and run our download speed test now, but please note that we will only be able to offer you a limited assessment on the meaning of your results.
Yet it will let me continue and do the test anyway. Any Ideas?
Thanks

FAQ
1. Best Effort Test: -provides background information.
Download Speed
55.44 Mbps
0 Mbps
57.38 Mbps
Max Achievable Speed
Download speedachieved during the test was - 55.44 Mbps
For your connection, the acceptable range of speedsis 45.9 Mbps-57.38 Mbps .
Additional Information:
IP Profile for your line is - 57.38 Mbps
2. Upstream Test: -provides background information.
Upload Speed
8.5 Mbps
0 Mbps
20 Mbps
Max Achievable Speed
Upload speed achieved during the test was - 8.5Mbps
Additional Information:
Upstream Rate IP profile on your line is - 20 Mbps
We were unable to identify any performance problem with your service at this time.
It is possible that any problem you are currently, or had previously experienced may have been caused by traffic congestion on the Internet or by the server you were accessing responding slowly.
If you continue to encounter a problem with a specific server, please contact the administrator of that server in the first instance.
Please visit the FAQ if you are unable to understand the test results.

FaceTime: please check your network connection...

Any idea how to fix this problem? the remainder of internet applications work just fine.

Let me expand my question a little bit... I had been using FaceTime without difficulty, and then all of a sudden, when I opened the application, rather than log me in automatically, the program asked for me to enter my password and sat there thinking. It then displayed the message "Could not sign in. Please check your network connection and try again." I verified my apple ID and password, tried using a different apple ID and password and still received the same message. It also displays the same message if I try to create a new account from that set-up page. One would assume that the network connection is indeed not funtioning, but I can browse on the internet and use Skype without any problems, so it seems the issue is with FaceTime itself. Additionally, I can log into FaceTime on my iPad 2 without any problems.
Any new thoughts on how to get FaceTime up and running again? Thanks.

I keep getting an error message when trying to log on to FaceTime and iMessage on my iPad mini with wifi...could not sign in. Please check your network connection and try again. Help!

I keep getting an error message when trying to log on to FaceTime and iMessage on my iPad mini with wifi...Could not sign in. Please check your network connection and try again. Help!

Using FaceTime http://support.apple.com/kb/ht4319
Troubleshooting FaceTime http://support.apple.com/kb/TS3367
The Complete Guide to FaceTime + iMessage: Setup, Use, and Troubleshooting
http://tinyurl.com/a7odey8
Troubleshooting FaceTime and iMessage activation
http://support.apple.com/kb/TS4268
Using FaceTime and iMessage behind a firewall
http://support.apple.com/kb/HT4245
iOS: About Messages
http://support.apple.com/kb/HT3529
Set up iMessage
http://www.apple.com/ca/ios/messages/
Troubleshooting Messages
http://support.apple.com/kb/TS2755
Setting Up Multiple iOS Devices for iMessage and Facetime
http://macmost.com/setting-up-multiple-ios-devices-for-messages-and-facetime.htm l
FaceTime and iMessage not accepting Apple ID password
http://www.ilounge.com/index.php/articles/comments/facetime-and-imessage-not-acc epting-apple-id-password/
Unable to use FaceTime and iMessage with my apple ID
https://discussions.apple.com/thread/4649373?tstart=90
For non-Apple devices, check out the TextFree app https://itunes.apple.com/us/app/text-free-textfree-sms-real/id399355755?mt=8
 Cheers, Tom

When I try to use FaceTime on my Macbook Air, I try to verify the email I want people to call me with, and it says verified, but soon an message comes up that says "Could not verify the email address. Please check your network connection and try again."

So our school lets us use Macbook Airs for the school year, and it has facetime on it. I know facetime isn't blocked because like everyone else is using it. So I decide to give it a try. I click the icon, it says enter your apple ID. I dont have one, so I click to make one, and do so. I then enter my apple ID and click next. The screen reads "People will call you using your email address. What email address would you like to use?" I enter my email address in the box below the message, and then go to my email and click the link, and sign in, thus verifying the email. I go back to the facetime window, and click next. At the top it says Verified, but when I click next it doesn't go on to the next step, it simply blacks out the next button so that I can not click it, and after a few minutes a message comes up that says "Could not verify the email address. Please check your network connection and try again."
So that is the issue, please help!!!!!
*Note-I repeat that I know it is not blocked by the school because everyone else uses it just fine.*

Hello BassoonPlayer,
Since you are using one of the the school's Macbooks, it is quite possible that the time and date are not properly set on the computer that you are using. FaceTime will not work if you do not have the proper time zone set up for the location that you are in. This past week, there were a two other Macbook users I've helped by simply telling them to set the Date/Time properly. By the way, you described your problem very well, which makes it easier for us to help you. Hope this solves your problem -- if not, post back and I can suggest other remedies.
Wuz

I get the following message, when trying to check for updates on itunes:- "The iTunes update server could not be contacted. Please check your internet connection or try again later".

I get the following message when I go to "check for updates" on iTunes (I have XP on windows). Error message: "The iTunes update server could not be contacted. Please check your internet connection or try again later".
My firewall (both anti virus firewall and windows firewall, are set up to allow itunes programme to work) - I also have set both internet explorer and chrome to allow
apple website as an exception.
However, I still get the same error message... can anyone help?
Thanks

Try updating your iTunes using an iTunesSetup.exe (or iTunes64Setup.exe) installer file downloaded from the Apple website:
http://www.apple.com/itunes/download/

TS3297 My 2nd generation ipod touch is giving me the following error when I try accessing Itunes or the app store. "Cannot connect to the Store. A secure connection could not be established. Please check your date & time settings" I am on a secure networ

My 2nd generation ipod touch is giving me the following error when I try accessing Itunes or the app store. "Cannot connect to the Store. A secure connection could not be established. Please check your date & time settings" I am on a secure networkl.

Can't connect to the iTunes Store
Make sure that time zone is correct in addition to date and time

TS1424 I am having issues downloading music from iTunes, it comes up saying an unknown error has occurred - please check your network connection. Now I can connect to iTunes store and have itunes as an exception for downloads so don't know what else to do

Hello, I've started having an issue downloading songs and apps from iTunes to our PC which has Windows XP Professional installed. We also use Karspersky Anti-Virus and Firefox as an internet browser. Have never had this issue before, it comes up with "An unknow error has occured and downloads are stopped with an error 8003. Also says please check your network connection" We have no issue connecting to iTunes store or the network so not sure how to fix this. It is very frustrating. Have checked Windows Firewall and iTunes is an exception, can't think of anything else why it won't work.

I sounds as though you need to start again. The following article tells you how to completely remove iTunes and Quicktime. If you didn't actually install iTunes you wont find it in add/remove programs so you can't do that bit, but still delete the iTunes folder in Program Files as advised in the article.
http://docs.info.apple.com/article.html?artnum=93698
Once you have got rid of them, try installing the latest version of iTunes. There is a link to it in the article.
Itunes wont move your music for you, get iTune sgoing then ask again.

"Oops, please check your details" - Modern Skype

Similar Messages

Maybe you are looking for