Opacity Effect Not Working As Expected
Hi,
I noticed that whenever I animate the opacity of a clip that has a gamma correction efftect applied to it, the opacity does not work. Has anyone else seen this?
thx
I believe that if you do not use the automatic ken burns effect you need to set the effect for each photo - pick one or two and with the KB slider to the left set the view for the beginning photos and then slide the slider to the right and set the end view - then it will transition between those two (I'm thinking that you can turn auto automatic and override it for just the first slide by making the start and end the same so the transition does not really do anything
Try that first (it is easier )
LN
Similar Messages
-
Ken Burns Effect not working as expected.
Hi,
I have created a slideshow in iPhoto 08 and want to have all of the slides use the ken burns effect except the first one (i want this to be a 20 second title photo). To get this to work, i have disabled the Automatic Ken Burns effect in the settings menu and then clicked the Ken Burns checkbox in all of the photos from the second one onwards. Even with these checkboxes selected, the photos just stay still and the ken burns effect does not work. Am i going about this the wrong way?
Any ideas appreciated.
Joe.I believe that if you do not use the automatic ken burns effect you need to set the effect for each photo - pick one or two and with the KB slider to the left set the view for the beginning photos and then slide the slider to the right and set the end view - then it will transition between those two (I'm thinking that you can turn auto automatic and override it for just the first slide by making the start and end the same so the transition does not really do anything
Try that first (it is easier )
LN -
My problem is pretty easy to reproduce.
I created a project from scratch with a view model.
As you can see in the setter of "Age" property I have a simple logic.
public class MainViewModel : INotifyPropertyChanged
public event PropertyChangedEventHandler PropertyChanged;
private int age;
public int Age
get
return age;
set
/*Age has to be over 18* - a simple condition in the setter*/
age = value;
if(age <= 18)
age = 18;
OnPropertyChanged("Age");
public MainViewModel(int age)
this.Age = age;
private void OnPropertyChanged(string propertyName)
if (this.PropertyChanged != null)
PropertyChanged(this, new PropertyChangedEventArgs(propertyName));
In the MainPage.xaml
<Grid x:Name="LayoutRoot" Background="White">
<TextBox
Text="{Binding Path=Age, Mode=TwoWay}"
HorizontalAlignment="Left"
Width="100"
Height="25"/>
<TextBlock
Text="{Binding Path=Age, Mode=OneWay}"
HorizontalAlignment="Right"
Width="100"
Height="25"/>
</Grid>
And MainPage.xaml.cs I simply instantiate the view model and set it as a DataContext.
public partial class MainPage : UserControl
private MainViewModel mvm;
public MainPage()
InitializeComponent();
mvm = new MainViewModel(20);
this.DataContext = mvm;
I expect that this code will limit set the Age to 18 if the value entered in the TextBox is lower than 18.
Scenario: Insert into TextBox the value "5" and press tab (for the binding the take effect, TextBox needs to lose the focus)
Case 1: Debugger is attached =>
TextBox value will be "5" and TextBlock value will be "18" as expected. - WRONG
Case 2: Debugger is NOT attached =>
TextBox value will be "18" and TextBlock value will be "18" - CORRECT
It seems that when debugger is attached the binding does not work as expected on the object that triggered the update of the property value. This happens only if the property to which we are binding has some logic into the setter or getter.
Has something changed in SL5 and logic in setters is not allowed anymore?
Configuration:
VisualStudio 2010 SP1
SL 5 Tools 5.1.30214.0
SL5 sdk 5.0.61118.0
IE 10
Thanks!Inputting the value and changing it straight away is relatively rare.
Very few people are now using Silverlight because it's kind of deprecated...
This is why nobody has reported this.
I certainly never noticed this problem and I have a number of live Silverlight systems out there.
Some of which are huge.
If you want a "fix":
private void OnPropertyChanged(string propertyName)
if (this.PropertyChanged != null)
//PropertyChanged(this, new PropertyChangedEventArgs(propertyName));
Storyboard sb = new Storyboard();
sb.Duration = new Duration(new TimeSpan(0, 0, 0, 0, 100));
sb.Completed += delegate
PropertyChanged(this, new PropertyChangedEventArgs(propertyName));
sb.Begin();
The fact this works is interesting because (I think ) it means the textbox can't be updated at the point the propertychanged is raised.
Please don't forget to upvote posts which you like and mark those which answer your question.
My latest Technet article - Dynamic XAML -
Subtraction of two key figures normalized to result not working as expected
Hello SAP Community!
I am having problems with getting the right result from a subtraction of two KFs which are "normalized to results" which means the KFs really have values expressed as percentages. The substraction that should be performed is of two percentages (e.g.: 87.298% - 85.527% = 1.77%) but my report prints out the result as "number of units" instead (e.g.: 87.298% - 85.527% = 71,514.00 EA). The two normalized KFs actually "point" to two stock KFs, hence the "number of units".
In order to explain the problem I am facing please analyze below text:
1) Let's assume I have below data:
LOAD MONTH PLANT MATERIAL HORIZON MONTH FORECAST UNITS
200805 PLANT-A MAT-1 200805 510,235.00
200805 PLANT-B MAT-1 200805 74,240.00
200805 PLANT-A MAT-1 200806 438,721.00
200805 PLANT-B MAT-1 200806 74,240.00
200805 PLANT-A MAT-1 200807 356,981.00
200805 PLANT-B MAT-1 200807 74,240.00
200806 PLANT-A MAT-1 200805 0.00
200806 PLANT-B MAT-1 200805 0.00
200806 PLANT-A MAT-1 200806 510,235.00
200806 PLANT-B MAT-1 200806 74,240.00
200806 PLANT-A MAT-1 200807 438,721.00
200806 PLANT-B MAT-1 200807 74,240.00
2) Then, assume I have a comparison report, restricted by load month for two months May and June 2008 (filter restricted by two month variables) with FORECAST units spread accross columns for whole horizon (two months also in this case).
Material Plant 2008/06 2008/07
===================================================================
MAT1 PLANT-A
Base Units (May 2008) 438,721.00 356,981.00
Comparison Units (June 2008) 510,235.00 438,721.00
PLANT-B
Base Units (May 2008) 74,240.00 74,240.00
Comparison Units (June 2008) 74,240.00 74,240.00
TOTALS Base Units 512,961.00 431,221.00
Comparison Units 584,475.00 512,961.00
3) Now, let's suppose we want to know the proportions (%) of Base vs Comparison units, so
we normalize forecats to results an we get the below report:
Material Plant 2008/06 2008/07
===================================================================
MAT1 PLANT-A
Base Units (May 2008) 438,721.00 356,981.00
Base Units % (May 2008) 85.527% 85.527%
Comparison Units (June 2008) 510,235.00 438,721.00
Comparison Units %(Jun 2008) 87.298% 82.784%
PLANT-B
Base Units (May 2008) 74,240.00 74,240.00
Base Units % (May 2008) 14.473% 15.702%
Comparison Units (June 2008) 74,240.00 74,240.00
Comparison Units %(Jun 2008) 12.702% 17.216%
TOTALS Base Units 512,961.00 431,221.00
Comparison Units 584,475.00 512,961.00
4) Finally, let's suppose we want to know the deltas (differences) of Base vs Comparison
units, for both number of units and %. The report now look as below:
Material Plant 2008/06 2008/07
===================================================================
MAT1 PLANT-A
Base Units (May 2008) 438,721.00 356,981.00
Base Units % (May 2008) 85.527% 85.527%
Comparison Units (June 2008) 510,235.00 438,721.00
Comparison Units %(Jun 2008) 87.298% 82.784%
Delta base vs. comp. units % 1.77% 2.74%
Delta base vs. comp. units 71,514.00 81,740.00
PLANT-B
Base Units (May 2008) 74,240.00 74,240.00
Base Units % (May 2008) 14.473% 15.702%
Comparison Units (June 2008) 74,240.00 74,240.00
Comparison Units %(Jun 2008) 12.702% 17.216%
Delta base vs. comp. units % -1.77% -2.74%
Delta base vs. comp. units 0.00 0.00
TOTALS Base Units 512,961.00 431,221.00
Comparison Units 584,475.00 512,961.00
5) PROBLEM:
In my report, the "Delta base vs. comp. units %" is not working as expected and
calculates number of units just as "Delta base vs. comp. units" does instead of calculating the % difference.
So my report looks as follows:
Material Plant 2008/06 2008/07
===================================================================
MAT1 PLANT-A
Base Units (May 2008) 438,721.00 356,981.00
Base Units % (May 2008) 85.527% 85.527%
Comparison Units (June 2008) 510,235.00 438,721.00
Comparison Units %(Jun 2008) 87.298% 82.784%
Delta base vs. comp. units % 71,514.00 81,740.00 <<<WRONG!!
Delta base vs. comp. units 71,514.00 81,740.00
PLANT-B
Base Units (May 2008) 74,240.00 74,240.00
Base Units % (May 2008) 14.473% 15.702%
Comparison Units (June 2008) 74,240.00 74,240.00
Comparison Units %(Jun 2008) 12.702% 17.216%
Delta base vs. comp. units % 0.00 0.00
Delta base vs. comp. units 0.00 0.00
TOTALS Base Units 512,961.00 431,221.00
Comparison Units 584,475.00 512,961.00
The formulas are:
a) Delta base vs. comp. units %
Delta base vs. comp. units % = Comparison Units % - Base Units %
b) Delta base vs. comp. units
Delta base vs. comp. units = Comparison Units - Base Units
The KFs
- Comparison Units %
- Base Units %
Are RESTRICTED key figures (restricted to Base and comparison month variables) which
are setup as:
1) Calculate Result As: Summation of Rounded Values
2) Calculate Single Value as: Normalization of result
3) Calculate Along the Rows
The KFs
- Delta base vs. comp. units %
- Delta base vs. comp. units
are FORMULAS setup to:
1) Calculate Result As: Nothing defined
2) Calculate Single Value as: Nothing defined
3) Calculate Along the Rows: user default direction (grayed out)
Thanks for the time taken to read in detail all of this. Long text but necessary to understand what the problem is.
Any help is highly appreciated.
Thank you.
MarioHi,
The subraction will be carried out before doing the normalization of your KF's. So, it is displaying "number of units". Create a calculated keyfigure and subtract the KF's and in the properties of this calculated keyfigure, change the enhancement as "After Aggregation".
I hope this will solve your issue.
Regards,
S P. -
Events in SubVi not working as expected
Hi, I am reposting this question as my previous one didn't resulted in any satisfactory conclusion.
I have attached my Vi's which are not working as expected. If I remove ONE subVi and its associated 3 controls and two indicators, the other one works just fine, but when I add two SUB Vis, it goes messy. I am trying to learn this way, I am sure it can be done many other ways, but please help me finding out the problem doing it this way as in my final MainVi, I would like to use 8 such sub Vis. Thanks.
Solved!
Go to Solution.
Attachments:
Main.vi 11 KB
SubVi.vi 12 KB
SubVi_2.vi 15 KBYour main problem is DATA FLOW. A loop cannot iterate until EVERYTHING in it has completed. So, as you have it, you have to have both event structures execture before you can go back to look for the next event. So if you insist on having these subVIs, they need to be in seperate loops.
BTW, you can get away with a single subVI. Go into the VI properties and make it reentrant (preallocated clone). Then each call of your subVI will have its own memory space. A lot easier to maintain that way.
And I know you said you didn't want alternatives, but here's how you can do it all with a single event structure in your main loop.
There are only two ways to tell somebody thanks: Kudos and Marked Solutions
Unofficial Forum Rules and Guidelines
Attachments:
Main_MODTR.vi 10 KB -
AFS ARUN Size Substitution Not Working As Expected
Hi All,
I need help with this. If any one of you have worked with AFS ARUN size substitution, kindly provide me with some details on how can I set it up. I am specially interested in setting up size substitution with two-dimensional grids.
I have setup some examples but it does not work as expected.
Here is a small example:
Say I have a size 28/30, 28/32 .........29/30....
What I want to achieve is that during ARUN if there is a shortage of stock in 28/30 then the remaining requirement qty should be confirmed from size 28/32.
with my setup after 28/30 it goes into looking for stock in 29/30, which is what I do not want.
Any inputs will be really appreciated.
Thanks!!srdfrn wrote:
Hi YOS,
I tried importing a PCX image into CVI 2010 and then sizing the image to the control and didn't see the behavior you have been describing. Would you mind posting an example (alongside an image file) that demonstrates this?
Also, one thing I noticed is that PCX images appear to be quite dated. Could upgrading them to a JPEG or PNG format be an option for you?
Thanks,
Stephanie R.
National Instruments
Stephanie, thanks for the reply.
I am very sorry to state that I made a mistake.
VAL_SIZE_TO_IMAGE indeed works.
What fails to work is VAL_SIZE_TO_PICTURE. (Second option in Fit Mode attribute in control editing panel)
I tried with JPEG and it's the same.
I am attaching an example.(Load_Image.c & ONEP_3Trow_POS1.JPG)
A panel with two picture rings.
- SW_1 remains at the intended size and the loaded picture is not clear.
- SW_2 will fit to picture size and looks OK.
Appreciate your support,
YOSsi Seter
Attachments:
Load_Image.c 2 KB
ONEP_3Trow_POS1.JPG 4 KB -
Notification "Launch the app and go to the library" not working as expected
Hello,
we are sending notification "Launch the app and go to the library" - but it's not working as expected, it's still just launching app with last open folio.
Whats wrong there? Do we need v30 app? We have V29, but this is not mentioned in documentation.
Thanks
MartinAh.
Ok, now it's clear.
Anyway i would appreciate possibility to force viewer to switch to library view after new issue is detected, even without notification. Quite often requested feature - "there is new cover in Newsstand, but customer don't know how to download new publication easily".
Martin -
DB Adapter polling as singleton process is not working as expected
Am using poller DB adapater to control the transaction per seconds to the downstream system and i want this poller process as singleton (One instance should be in running state at a time).
As suggested in oracle documents , below is the parameters configured in composite.xml file.
<service name="polling_Mange_Alert_Events"
ui:wsdlLocation="polling_Mange_Alert_Events.wsdl">
<interface.wsdl interface="http://xmlns.oracle.com/pcbpel/adapter/db/Application1/int_app_manageAlerts/polling_Mange_Alert_Events#wsdl.interface(polling_Mange_Alert_Events_ptt)"/>
<binding.jca config="polling_Mange_Alert_Events_db.jca">
<property name="singleton">true</property>
</binding.jca>
<property name="jca.retry.count" type="xs:int" many="false" override="may">2147483647</property>
<property name="jca.retry.interval" type="xs:int" many="false"
override="may">1</property>
<property name="jca.retry.backoff" type="xs:int" many="false"
override="may">2</property>
<property name="jca.retry.maxInterval" type="xs:string" many="false"
override="may">120</property>
</service>
Below is the JCA file parameters configured :
<adapter-config name="polling_Mange_Alert_Events" adapter="Database Adapter" wsdlLocation="polling_Mange_Alert_Events.wsdl" xmlns="http://platform.integration.oracle/blocks/adapter/fw/metadata">
<connection-factory location="eis/DB/vff-int-fus" UIConnectionName="PT_APPINFRA" adapterRef=""/>
<endpoint-activation portType="polling_Mange_Alert_Events_ptt" operation="receive">
<activation-spec className="oracle.tip.adapter.db.DBActivationSpec">
<property name="DescriptorName" value="polling_Mange_Alert_Events.ManageAlertEvents"/>
<property name="QueryName" value="polling_Mange_Alert_EventsSelect"/>
<property name="MappingsMetaDataURL" value="polling_Mange_Alert_Events-or-mappings.xml"/>
<property name="PollingStrategy" value="LogicalDeletePollingStrategy"/>
<property name="MarkReadColumn" value="TRANSACTION_STATUS"/>
<property name="MarkReadValue" value="Processing"/>
<property name="PollingInterval" value="10"/>
<property name="MaxRaiseSize" value="5"/>
<property name="MaxTransactionSize" value="5"/>
<property name="NumberOfThreads" value="1"/>
<property name="ReturnSingleResultSet" value="false"/>
<property name="MarkUnreadValue" value="Pending"/>
</activation-spec>
</endpoint-activation>
</adapter-config>
This poller process is running on clustered environment (2 soa nodes) and it is not working as expected as singleton process.
Please advise to solve this issue ?Hi,
1.Set Singleton property outside <binding.jca> like this:
<binding.jca config="polling_Mange_Alert_Events_db.jca"/>
<property name="singleton">true</property>
<property name="jca.retry.count" type="xs:int" many="false" override="may">2147483647</property>
<property name="jca.retry.interval" type="xs:int" many="false"
2.Also you can try setting these values in jca file:
<property name="RowsPerPollingInterval" value="100"/>
<property name="MaxTransactionSize" value="100"/>
3. try to increase the polling interval time.
Regards,
Anshul -
TCP Window sizing not working as expected for Windows server 2008 R2 SP1
Hi ,
TCP window size is not working as expected. It is varying . Aplied the hotfix suggested by Microsoft and set the multipliccation factor as 1.The window size is not getting auto tuned based on the client machine. The data transfer rate is getting degraded.
Please help.
Thanks,
Pro1962Hi,
I think window auto-tuning is enabled.
You can disable it by running the following commend.
netsh interface tcp set global autotuninglevel=disabled
Hope this helps. -
Container-Managed Transaction Type Attributes not working as expected
I am having a problem with the container-managed transactions not working as expected. I have 2 methods that work as follows:
MethodA{
for(a lot)
call MethodB;
@Transaction Type = RequiresNew
MethodB{
EntityManager Persist to database
I want the code in MethodB to be committed to the database when methodB returns. The problem is that I am running out of memory and MethodA is failing. When methodA fails after numerous calls to MethodB nothing is persisted to the database.
It is my understanding that when using requires new transactions that a new transaction is started for each call to the method and ends when the method returns while the calling method transaction is suspended.
How am I misunderstanding the requiresNew transaction attribute. What can I do to make a batch insert into my database that will not run out of memory (commit when a methodB returns)?
Thanks in advance.The problem is that EJB invocation semantics for security, container-managed transactions, etc.
only apply when an invocation is made through an EJB reference. In your case, you are directly
invoking the implementation method from within the bean. The EJB container has no idea that's
happening. It's no different than invoking a utility method.
In order to get the behavior you'd like, you need to retrieve a reference to your own bean and invoke
through that. You can use SessionContext.getBusinessObject() to get the EJB reference for the
business interface through which the method in question is exposed.
--ken -
Namespaces not working as expected
Hi, I've got problems with namespaces not working as expected. When I isolate a process into a new network and mount namespace, a newly mounted file system will be visible to all processes.
Steps to reproduce:
$ sudo unshare -mn bash
bash# mount -t sysfs sysfs /sys
bash# exit
$ cat /proc/mounts
Result:
/proc/mounts will contain a new line for sysfs. This means the /sys/fs/cgroups directory will appear to be empty as the new sysfs is mounted over the old However you can undo it by
sudo umount /sys
Expected result:
The /sys directory will only be new inside the bash process started using unshare and not anymore once you exit bash.
Did I understand something wrong? Or might this be a bug in the kernel?
Note that when using
unshare -m bash
without isolating the network namespace it will refuse to mount sysfs as it is already mounted or busy. Strange.Hello, because sysfs is shared, see unshare(1) for more details.
-
Lighting Effect not work in CS6*
Why Filter/ Render/ Lighting Effect not work in CS6?
It's not work only in CS6 Beta or in anything else :-/. It's Useful with meA bit more information would be helpful. What is happening on your system when you go to lighting effects?
What system are you running on? What video card are you using? Are you using the most recent driver?
Do check our system FAQ as GPU is requried for lignting effects to work properly.
FAQ: What features use the GPU and how do I troubleshoot GPU issues?
Pattie -
After Effects not working in Mavericks
Is anyone having issues with Adobe After Effects not working in Maveriks? Premeire, Photoshop, Audition all work, but not AE. No update from Adobe available.
This update is ONLY FOR MAVERICKS. You can't update through Creative Cloud, to prevent users of other operating systems from installing it.
-
UpsertDocumentAsync not working as expected
I'm using UpsertDocumentAsync to either insert or update a document, but it doesn't seem to work as expected. When I use it either inserts / creates or
replaces the document. I doubt I'm calling it wrong?
await client.UpsertDocumentAsync(documentsLink, this.document);
Working as expected (but with incorrect name) or not working as expected?
Regards,
Joakim
Joakim Rosendahl Consultant at OnTrax AB, Sweden.Found this one (doesn't contain the work PATCH though)
http://feedback.azure.com/forums/263030-documentdb/suggestions/7075256-provide-for-upsert
Voted for that one, but it doesn't seem like the developer community is interested in upsert/patch functionality =/.
Joakim Rosendahl Consultant at OnTrax AB, Sweden. -
Exchange Online Protection (standalone) permissions are not working as expected
Exchange Online Protection (standalone) permissions are not working as expected.
we provided access to Hygiene Management to some members and they not able to access EOP site.
This is standalone EOP.
ksrugiHi,
what roles did you have assigned to them and what error message do you get?
Greetings
Christian
Christian Groebner MVP Forefront
Maybe you are looking for
-
The Home button on my iPod Touch is very unresponsive. It takes several tries to activate it. While doing so, it responds to one click versus the intended two clicks and vice versa. It is a very frustrating process. Any suggestions? I already tr
-
Acrobat 9 Plugin and Orbix2000 issues
I build a plugin using Acrobat 9 SDK. The plugin starts a CORBA (Orbix2000) instance and a call back function in CORBA. The same plugin works fine with Acrobat 8. In Acrobat 9.x (9.1 and 9.2), after the call back function in CORBA, most of the Acro
-
Monitoring OAQ using mgw_gateway gives an odd result?
When we submit the following query: select AGENT_STATUS, AGENT_PING, LAST_ERROR_DATE, LAST_ERROR_TIME from mgw_gateway; We get this result: SQL> select AGENT_STATUS, AGENT_PING, LAST_ERROR_DATE, LAST_ERROR_TIME from mgw_gateway; MESSAGING GATEWAY IS
-
Appleworks crashes w/Exc_Bad_Access Kern_Protection_Failure
On a set of eMacs running 10.3.9 and for a specific group of teachers, when they open Appleworks and select from the palette (say Word Processing) the following error occurs. Other groups do not have this problem. The same said teachers can go on oth
-
Hi I have a folder on my C-drive under application data\adobe\common\ called "media cache files". There is a huge amount of data in that folder. Can I put it somewhere else, and is it safe to empty it once in a while? Thanks. /Ulf