Opacity Masks in cs4 can't find layers with main objects on it.

I created image with flag and did clipping mask with some text. Now when I do a opacity mask my other layers disappear and i can't seem to bring them back. I use the transparency to mask and clip. After that my layers with the first original items I can't find them or get back to them. Can someone tell how I can resolve this problem.
Thank you!

Once you start editing your opacity mask, you have to go back into normal editing mode by clicking on the object on the left side in the transparency panel. Click on the right to edit the mask, click on the left to get back out of that to editing the rest of your document. It's a bit confusing the way it's set up - there's no obvious indication that you're editing your mask and are isolated from the rest of your document...

Similar Messages

How can i find imei with apple id if i have no more iphone?

How can i find imei with apple id if i have no more iphone?

how to find IMEI, etc
http://support.apple.com/kb/HT4061?viewlocale=en_US&locale=en_US
Be sure to read the bottom part of the article about using iTunes to find
the IMEI.
Or contact your wireless provider - they should have the IMEI.

Can I find out, with user has deleted all cost estimates with CKR1?

Hi Community,
ich have a major problem: all our standard material don't have a cost estimate any more, because a unknown user has deleted all current cost estimates. Can I find out, with user has used the CKR1 transaction? And much more importend: how can I solve the problem? Do I need to re-calculate all the material?
Thanks for any idea and help
PoD

Hi,
you have to make the costing run, marking, releasing again but thats not the whole work.
If there are PP-orders that have been created based on the old/deleted plan cost estimates, the variance calculation will not work as the plan cost estimate is missing (even if the new one is released in the same period).
Thus variance calculation is not possible for those orders... You have to settle the whole balance to receiver object by removing the variance key in PP-order. Try first for one particualr order to see if there are some other problems that need to be solved during month-end-closing.
How to find out who has executed CKR1 (SAPCKR1): Check authorizations for (hopefully) a small number of user who are allowed to use CKR1.
Use T-Code ST03N, in the left upper window double-click "total" (maybe click a day if you can imagine which (possible) date it was). In lower left section open "user and settlement statistics" and then click "user profile". Now go to each possible user and look for T-Code CKR1.
This can be time-consuming but its worth a try...
For the future: restrict CKR1 to a very small number of user (and they should be well trained...). I once had a company (with poor authorization concept) but CKR1 was blocked in SM01 and a ZCKR1 was created and in this Z-transaction USER-name was checked (if SY-USNAM...) so only the use names named in this Z-program were allowed to use ZCKR1. Not the best way but sufficient for them...
Good luck, Christian

How can we find out the info object in a query ....?

How can we find out the info object in a query is belongs to that particular info cube? If the query is built on a Multiprovider having 4 different info cubes.

Hi,
If you have restrictions at the infoprovider level in the RKF then it is coming from that particular infocube.
Or go to the selection option in the multiprovider...her you can get the mappings of which key figure is populted from which infocube.
For characteristics you will have to look for identification tab in the characteristics option.
Thanks

Looking for a 2014 InDesign calendar (full year) WITH holidays. Can't find one with holidays.

Looking for a "year at a glance" InDesign calendar WITH holidays. I can't seem to find any with the holidays. Thanks

Screw it?
I sent you a link as to how to use Calendar Wizard (free) to make a calendar with interfaith holidays.
If you just want ordinary holidays, Calendar Wizard (http://calendarwizard.sourceforge.net/) does everything you want?
What more do you want?

I can open audio files but can't find them with Finder or Spotlight.

Hello!
I wanted to delete a few songs and found that by searching in Finder or Spotlight they couldn't be found.
I can open the files in Finder by opening iTunes, ctrl clicking the song and selecting 'view in Finder'. If I then 'get info' on the file it gives a folder, 'iTunes music' that I can't find. Is it possible the folder is there but hidden or that 'get info' is giving the wrong address?
I've recently moved my data (only) onto a new computer using Migration Assistant. On my old computer I'd find the songs by searching in Finder with no problems.
Here's an example incase I've not been clear:
I ctrl click on 'the boy who killed time' and select 'open in finder'.
It opens in finder and i again ctrl click on it and select 'get info'.
Get info gives me the following address for the file: Macintosh HD ▸ epoche ▸ Music ▸ iTunes ▸ iTunes Music ▸ vincent vincent and the villains ▸ are you ready for the country.
If I look for the song by clicking through the folders in finder (opening 'epoche' then 'Music' then 'iTunes') I can't find the folder 'iTune Music' in the 'iTunes' folder.
Any ideas? Rachel

My answer in the older thread is still valid
Maybe the "iTunes Music" folder is hidden.
Please open Terminal and issue the following command
ls -ladO /epoche/Music/iTunes/iTunes\ Music
you should get a line similar to this
drwxrwxrwx 13 yourusername staff hidden 442 12 Mar 21:49 /epoche/Music/iTunes/iTunes Music
Numbers, date and time may differ.
If you see hidden then the folder is hidden. To unhide "iTunes Music", in Terminal issue the following command
chflags nohidden /epoche/Music/iTunes/iTunes\ Music

Can't find bean with adf bc sdo web service

Hi,
I made a sdo web service with adf bc on the customer table in the oe schema. This works fine, I deployed this on the j2ee container of jdev tp4.
Now I use this sdo ws in a entity of an other project bc4j project. I add the jars , update the connection.xml and I configured the jndi.properties so it can lookup the sdo bean which is defined in the connection.xml.
If I start up the new application I got jndi lookup error. It can't find the bean which is defined in the ServiceImpl of the sdo ws project. I saw this impl has annotations to make a bean
package nl.ordina.sdo.service.server.serviceinterface;
import java.lang.reflect.Method;
import java.util.List;
import nl.ordina.sdo.dataaccess.common.CustomersViewSDO;
import nl.ordina.sdo.service.common.serviceinterface.OEServiceService;
import oracle.jbo.common.sdo.SDOHelper;
import oracle.jbo.common.service.types.FindControl;
import oracle.jbo.common.service.types.FindCriteria;
import oracle.jbo.common.service.types.ProcessControl;
import oracle.jbo.common.service.types.ProcessData;
import oracle.jbo.server.svc.ServiceImpl;
import oracle.jbo.service.errors.ServiceException;
// --- File generated by Oracle ADF Business Components Design Time.
@javax.ejb.Stateless(name="nl.ordina.sdo.service.common.OEServiceServiceBean")
@javax.ejb.Remote(OEServiceService.class)
@javax.jws.WebService(targetNamespace="/nl/ordina/sdo/service/common/",
serviceName="OEServiceService", portName="OEServiceServiceSoapHttpPort",
endpointInterface="nl.ordina.sdo.service.common.serviceinterface.OEServiceService")
@oracle.j2ee.annotation.ejb.StatelessDeployment(copyByValue=false,
minInstances=2)
public class OEServiceServiceImpl extends ServiceImpl implements OEServiceService {
Why can't it find the bean
If I manually create a ejb session bean on the sdo application module then the new app finds the bean but it gives an error because it does not support the find operation.
thanks edwin

Thanks Steve.
I had my own jndi.properties file that's why it was working with ejb bean I created in the AM and not with the sdo web service.
I didn't know I had to add the jndi properties to the connection.xml maybe you can update the documentation.
<?xml version = '1.0' encoding = 'UTF-8'?>
<ns2:References xmlns:ns2="http://xmlns.oracle.com/adf/jndi">
<Reference className="oracle.jbo.client.svc.Service"
name="{/test/model/common/}DepartmentModuleService">
<Factory className="oracle.jbo.client.svc.ServiceFactory"/>
<RefAddresses>
<StringRefAddr addrType="serviceInterfaceName">
<Contents>test.model.common.serviceinterface.DepartmentModuleService</Contents>
</StringRefAddr>
<StringRefAddr addrType="serviceEndpointProvider">
<Contents>ADFBC</Contents>
</StringRefAddr>
<StringRefAddr addrType="jndiName">
<Contents>test.model.common.DepartmentModuleServiceBean</Contents>
</StringRefAddr>
<StringRefAddr addrType="serviceSchemaName">
<Contents>DepartmentModuleService.xsd</Contents>
</StringRefAddr>
<StringRefAddr addrType="serviceSchemaLocation">
<Contents>test/model/common/serviceinterface/</Contents>
</StringRefAddr>
<StringRefAddr addrType="jndiFactoryInitial">
<Contents>oracle.j2ee.rmi.RMIInitialContextFactory</Contents>
</StringRefAddr>
<StringRefAddr addrType="jndiProviderURL">
<Contents>ormi://localhost:23791/SvcInterfaceDeploy_MiddleTier</Contents>
</StringRefAddr>
<StringRefAddr addrType="jndiSecurityPrincipal">
<Contents>fmwadmin</Contents>
</StringRefAddr>
<StringRefAddr addrType="jndiSecurityCredentials">
<Contents>welcome</Contents>
</StringRefAddr>
<StringRefAddr addrType="serviceSchemaName">
<Contents>HRAppService.xsd</Contents>
</StringRefAddr>
</RefAddresses>
</Reference>
</ns2:References>
thanks edwin

How can I find movies with subtitles from iTunes for iPad?

The problems are two:
1) Using an iPad, can I find subtitled only movies? If were possible, how?
2) Ever with an iPad, it's possible setting on/off subtitles in movie? If were possible, how?
Thanks,
Cristiano.

You turn it on by going to settings-video-closed captioning=on.
If a video has captioning, should have the closed captioning symbol on the video description screen in iTunes store.
You can get software to add captions to your own videos.
Handbrake:
HandBrake can now include subtitle tracks that can be turned on and off, instead of rendering them onto the video track permanently (which also reduces video compression). This means you can include Closed Captioning data from DVDs and TV broadcasts, or find SRT text subtitle files on the 'net and include them. When using the Matroska container, you can also store the graphical subtitle images (VobSubs) from a DVD as a separate track. An added benefit is that multiple subtitle tracks can be included in the same output video.
Road movie:
http://www.bitfield.se/roadmovie/about_subtitles.html

How can I find setting with my iPad

I can't find setting and App Store how can I get

Cabdirisaq wrote:
I can't find setting and App Store...
Check in All Folders and on All Pages/Screens...
If no joy...
Settings > General > Reset > Reset Home Screen.

If you lost your ipod how can there be a way you can find it?like can you find it with the cerial number?

If they stole your ipod what are the ways you can find it?or is it possible to find it with the ipods cerial number?

Serial number will not help, except reporting it to the police.
Unless you enabled Find my iPod, and the iPod is online, you cannot track it.

How do I go back to 3.5 ? Nothing is compatiable with the stuff I use! Realplayer doesn't work anymore??? I can't find tools with the new version?HELP???? in English

I can't find tools..?
Realplayer was working now it won't !!

To downgrade to Firefox 3.6 first uninstall Firefox 4, but do not select the option to "Remove my Firefox personal data". If you select that option it will delete your bookmarks, passwords and other user data.
You can then install the latest version of Firefox 3.6 available from http://www.mozilla.com/en-US/firefox/all-older.html - it will automatically use your current bookmarks, passwords etc.
To avoid possible problems with downgrading, I recommend going to your profile folder and deleting the following files if they exist - extensions.cache, extensions.rdf, extensions.ini, extensions.sqlite and localstore.rdf. Deleting these files will force Firefox to rebuild the list of installed extensions, checking their compatibility, and reset toolbar customizations.
For details of how to find your profile folder see https://support.mozilla.com/kb/Profiles

How can I change my payment details on my iphone5 I can not find anywhere with any billing information to chaange my card type.

How do i find the billing information? I want to change my card details and can not find it anywhere on the iphone 5?! help!

iTunes Store: Changing your payment information
http://support.apple.com/kb/HT1918
iTunes Store Accepted Forms of Payment
http://support.apple.com/kb/HT5552
Also, I believe you'll have to use the French app store.
 Cheers, Tom

Can't use layers with RAW images

I am using Photoshop Elements 10 and I can't use layers on RAW format images. I'm thinking I must have something set incorrectly. They open in the RAW adjustment window but when I select Open all the layer options are just greyed out and unavailable.
Any ideas?

In the camera raw dialog you probably have the Bit Depth set to 16 bits/channel.
Change the Bit Depth to 8 bits/channel
(bottom middle of camera raw dialog where is says Depth)
You can also change the bit depth once in photoshop elements 10 by going to Image>Mode and clicking on 8 bits/channel

How can i find printers with 10.6.8

How can I find my printers with mac 10.6.8 on mac pro. When you go to add a printer
nothing shows up.

Mac OS X: How to reset the printing system

Layering with smart objects for architectural interior photos in PS

Help…
I was wondering if anyone has had experience of working on professional architectural photographs in PS?
I am interested in using and learning how to use the layering technique many architectural photographers use to produce different exposures of an interior in one image.
Many pros prefer this method I’m told, as it offers more control and flexibility than using HDR.
One photographer I spoke to said:
“I also bracket different exposures and use under and/or over exposures for extreme areas that need adjustment. Smart objects simplify things by using just one RAW file whenever in range”.
I don’t fully understand this; anyone got any links to websites etc I can learn more about this method?
Thanks..

Thanks Donald and Silkrooster,
Yes I am using multi exposures (RAW) with a tripod around 6-8 of them (stop apart, from highlights to shadows), as I was just going to use a HDR processor like Photomatrix or PS, however I using PS CS5 the other day the images look too fake, even when I bring the values down.
I need high reality & definition.
What I'm looking for is a great exposure range in my images, which I know cannot be achieved using just one RAW file.
The photographer I quoted at the start is a successful architectural photographer who uses multi RAW images in layers as smart objects (I guess so he can make adjustments back & forth without damaging the image quality?) and that he too found HDR too fake for his high end customers. He said it takes him a long time, I suppose he is creating layer masks it high detail of the section he wants the exposure to be different. This was all I could get out of him on his blog!
I’m familiar with this old method of laying as I used to do this many years ago using scanned slide film of different exposures in PS2, however it took a really long time (due to big files and slow computers) and I used to literately erase the layer above in parts I wanted the other exposure to come through. These offend used to go wrong and also crash the computer.
However now I understand people are using layer masks and RAW images (different exposures) as layers to have more control over the different exposures than if the different PSD files were imported.
I don’t know how you would use a RAW layer to adjust and process, colour balance etc?
My workflow at the moment is to produce the best image I can from a RAW image using Lightroom or Aperture 3, and import the different images as different PSD layers.
I cannot believe no one has come out with layering software or a plug-in to help this process with masks, exposure, aligning images etc?
Or have they but I don’t know about it yet??

Opacity Masks in cs4 can't find layers with main objects on it.

Similar Messages

Maybe you are looking for