Opacity problems with exported movie

Hi all
I'm having an issue with Motion 5. My project is 3046x1080 @ 30fps with a transparent canvas as a background and I have my timeline with about 5 clips all placed in seperate layers. All I'm trying to do is fade from one clip to the next so I first tried the 'Fade in/out' behaviour on each clip at 30 (I'm working at 30fps so this is 1 second?) and nothing appeared to happen on the canvas. It was only once I had the fade in time up to 100 when I started to see any fading on the canvas. I tried an export to quicktime as a test, but all the clips that had a fade in didn't fade in at all the just cut. So, I then went in and set all the fades manually - adjusting the opacity with keyframes only to have the same result as before.
The exported movie does retain the transparent background however - Motion just seems to be ignoring the opacity levels I've set. The only alternative I have found is to copy all my content across to my other machine and use Motion 4 - but that cripples that machine, certainly at this resolution I"m working at! Fortunately the clip I'm working on is only 30 seconds long....
Anyone got any ideas? I've searched the board but haven't found anything...
Many thanks

Thanks for the reply! I had checked to make sure everything was lined up but I double checked and indeed the fade in/out behaviour were indeed lined up to the clip. The export was also set to Colour + Alpha.
Upon further testing, as I don't really want to endure working at this resolution in Motion4, I've found my error - I didn't have the premultiplied Alpha enabled - I seem to remember I had a problem with that in the past hence turning it off.
So that appears to have solved my problem.....

Similar Messages

Problems with exported movies

A project exported as swf as well as exe, results in a movie
which freezes and hangs sometimes.
Also pictures are not shown with there transparency.
What can the causes for these problems?
The software runs on an Intel-4-PC (2,5GHz) with 1GB RAM.
Software Version: Windows XP Pro (SP2) and Captivate 3.0.0
Thank you

The issue seems to be related to sample rate. Because there's no 'options' screen for the Apple TV quicktime preset, there is no way to correct it on the front end that I can see yet, but in the cases I have had I was able to correct it this way:
open the out-of-sync mp4 in Quicktime. Select 'show movie properties' from the window menu. Select the audio track and hit extract. Select Export: Audio as AIFF when the new untitled audio clip opens. Click 'Options' and change the sample rate to 32khz. after the audio clip exports, open the new exported audio clip in the quicktime player. Select all, copy, then back in your movie, select the whole movie, then pick 'Add to Selection and Scale'. You can then save the movie as .mov. I haven't tried exporting to Apple TV again, since this would typically take several hours, even though the video format should be unchanged.
I tried to simply change the audio sample rate and save in Mpeg Streamclip, but the resulting file was invalid.

Problem with exporting movie from FC4.5 to Quicktime

I recently just finished a film, after completing the final renders and exporting the project to quicktime, it dropped certain parts of audio. Thinking this might have been a stupid error on my part, I opened FC4.5 and played the project. Everything played fine, none of the audio cut out? Something seems to be happening to the project during the exportation process? Has this happened to anybody and can anybody suggest a way to fix this problem.
I have tried removing the audio tracks that disappeared and placing them again, nothing. I recompressed and still nothing, please I'm out of ideas.
Thanks.

New Discussions ResponsesThe new system for discussions asks that after you mark your question as Answered, you take the time to mark any posts that have aided you with the tag and the post that provided your answer with the tag. This not only gives points to the posters, but points anyone searching for answers to similar problems to the proper posts.
If we use the forums properly they will work well...
Patrick

Problem with Exporter for MS Access 3.2 in SQL Developer

Hi,
I have problem with exporting tables and data from MS Access to XML with Exporter for MS Access 2000.
This error ocurr: 'Error #5 - XML Exporter'
When I use Exporter for MS Access 2002 this error ocurr: 'Error #3478 - XML Exporter'
Any leads how to solve this problem ?

Thread moved to Forum Home » Database » SQL Developer
SQL Developer
Please, stay tune there.
Nicolas.

Problem with exporting a report to excel vial citrix server

Hi,
We are encountering a problem with exporting a report to excel through ALV local file icon.A spread sheet is downloading only one row (From header) instead of many rows from the ALV output .
Above is working fine for the GUI installed on my PC, but not throgh the Citrix server.
Can any body have idea on above mentined?
Regards,
SK.

I understand that you're trying to download the file to a local computer through Citrix. In this case you need autorizations in Citrix for your user ( CItrix user)

Hi, I have problem with importing MOV files from SJCAM 4000. MOV files are in supported formats for Adobe Premiere Elements 11. But if I'm importing MOV file, only audio part is imported, video part is not imported. How can I solve this problem?

Hi, I have problem with importing MOV files from SJCAM 4000. MOV files are in supported formats for Adobe Premiere Elements 11. But if I'm importing MOV file, only audio part is imported, video part is not imported. How can I solve this problem?

haben
From looking at the specifications of your camera (SJCam 4000), we know already what video compression your camera is using. It is H.264.
A H.264.mov file should be supported by Premiere Elements 11. On what computer operating system is your Premiere Elements 11 running?
Do you have the latest version of QuickTime installed on your computer? And, are you running QuickTime and Premiere Elements 11 from a
User Account with administrative privileges? Please go to Premiere Elements 11 Publish+Share/Computer/QuickTime to confirm that you find
presets there for the QuickTime choice there.
What are the properties of these H.264.mov files - is it 1080p30 (1920 x 1080p30) or something else? Do you know if this camera is recording with a variable or
a constant frame rate?
Please review and consider and then we will decide what next.
Thank you.
ATR

I'm having problem with exporting video from premiere pro cc 2014

I'm using Adobe Premiere Pro CC 2014 and I'm having problem with exporting video.
When I click Export and media, the window for exporting appears and it starts exporting video.
But after a few minutes, it looks like it has completed exporting video and says there's a bug in exporting.
It literally says it has a problem with compiling, but I don't know what the real problem is.
I tried many things like restarting computer and Premire Pro but it's no use.
But it works when I use Adobe Media Encoder CC 2014 for exporting video.
If anyone knows any possibilities about why this problem happens, please let me know.

I'm having a similar issue. When I go to export my project, I add it to the render queue, set it up with the h.264 settings that I've used with countless past versions of the program, and then hit render. Randomly, at some point in the process, the render just stops and the ETA just keeps climbing. I actually had to save an XMF file of the CC 2014 project and bring it into the previous CC version of Premiere just to finish it. Even a clean re-install of CC 2014 doesn't work.

Problem with exporting devices to non-global zone

Hi,
I've problem with exporting devices to my solaris zones (i try do add support to mount /dev/lofi/* in my non-global zone).
A create cfg for my zone.
Here it is:
$ zonecfg -z sapdev info
zonename: sapdev
zonepath: /export/home/zones/sapdev
brand: native
autoboot: true
bootargs:
pool:
limitpriv: default,sys_time
scheduling-class:
ip-type: shared
fs:
dir: /sap
special: /dev/dsk/c1t44d0s0
raw: /dev/rdsk/c1t44d0s0
type: ufs
options: []
net:
address: 194.29.128.45
physical: ce0
device
match: /dev/lofi/1
device
match: /dev/rlofi/1
device
match: /dev/lofi/2
device
match: /dev/rlofi/2
attr:
name: comment
type: string
value: "This is SAP developement zone"
global# lofiadm
Block Device File
/dev/lofi/1 /root/SAP_DB2_9_LUW.iso
/dev/lofi/2 /usr/tmp/fsfile
I reboot the non-global zone, even reboot global-zone, and after that, in sapdev zone, there is no /dev/*lofi/* files.
What i do wrong? Maybe I reduce my sol 10 u4 sparc instalation too much.
Can anybody help me?
Thanks for help,
Marek

I experienced the same problem on my system Sol 10 08/07.
Normally, when the zone enters the READY state during boot, it's zoneadmd will run devfsadm -z <zone>. In my understanding this is to create the necessary device files in ZONEPATH/dev.
This worked well until recently. Now only the directories are still created.
It seems as if devfsadm -z is broken. Somebody should issue a call to sun.
As a workaround you can easily copy the device files into the zone. It is important not to copy the symbolic link but the target.
# cp /dev/lofi/1 ZONEPATH/dev/lofi
Hope this helps,
Konstantin Gremliza

Problem with Exporting Data to Excel

Hi Everyone,
I have problem with exporting the data to a excel file. I am using a XP
system in German which uses comma "," as the decimal point , and I also set
"Use localized decimal point*" under the FronPanel Options to be true. But
the exported excel file can not recognize (or just ignore) the comma for a
whole column (flow rate), for examle "1,234" (1.234 in non-german system)
would be 1234. But if I open its text file where the data came
from by calling Excel directly, there will be no problem. Is this a bug of
LabVIEW, or I forget some settings?
Thanks a lot!
Le
P.S: The LabVIEW version is 8.2.1 and the Office version is Office2007.

Hi Le,
Sound familiar; here in The Netherlands we have the same problem. That is why we use the English versions for XP and Office.
I don’t quite understand how you interface to Excel. Directly with ActiveX or through a CSV file.
Can you explain a bit more ?

URGENT : Problems with exporting a translated application

Hi ! I have a problem with exporting a translated application. Effectively, I exported both applications (The normal and the translated version). I want now to apply the translation XLIFF. I want to know if it is possible to apply my old XLIFF file. The problem is that I can't select the same ID for my application.
I really have problems!
Anyone can help me ?

When I import the translated version, the translation works a little bit. Effectively, all my reports appear but there is no item that appears.

Problem with export files

Hello,
I have got the version 5.3, original.
I have a problem with export files. After work with a lot of picture in dng format, I try to export all picture in jpg format, but the number of pictures exported are less than the original number.
Why?
Thank you in advance

There is nothing you are doingt wrong, the web people need to check their Flash stuff, most importantly realyl include al lthe files you provide them with. there's a reason why it spits out 4 files...
Mylenium

Does anyone have problems with iTunes movie rentals freezing in the middle of the movie?

Does anyone have problems with iTunes movie rentals freezing in the middle of the movie, requiring a force quit, which causes your rental to disappear? This has happened multiple times to me recently. Last time Apple didn't refund my money after reporting the problem. I have been using iTunes for many years but am about to give up.

Correction: I was refunded for the previous movie freeze.

How can I fix this problem with exporting Pages files?

Hello,
I'm having problems with exporting Pages files to Word or PDF (I haven't tried the other formats). Whenever I try to export the Page file, I get one message like this: "The document "XXXXXXX" could not be exported as "YYYYYYY". This problem started after the last Pages update, before that it was working fine. I restarted the computer, updated the OS, but the problem hasn't been solved.
Does anyone know how to fix this problem?
Thank you in advance!
Best regards,
Filipe

Computers are made of parts made by humans and assembled by humans of materials that are not perfect.
For example, a display cable that was accidentally pinched during assembly would pass quality control testing with flying colors and would not fail until the lid had been opened and closed several times.
Likewise a display might not fail until powered on and off a few hundred times.

Summary: Problem with export (maybe...terminated sucEE to XE issues exp/imp

Summary: Problem with export (maybe...terminated successfully with warnings) and import (IMP-00022: failed to process parameters)
I used PL/SQL developer to make a parameter file (initially I used it to export, then I just stole the file to try again). It contains 100 tables from a single schema.
Export from prod DB using exp parfile=test.par: Connected to: Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - Production
With the Partitioning, OLAP and Data Mining options
Export done in WE8MSWIN1252 character set and AL16UTF16 NCHAR character set
server uses ZHS16GBK character set (possible charset conversion)
About to export specified tables via Conventional Path ...
. . exporting table CONTRACT_INFO 12 rows exported
EXP-00091: Exporting questionable statistics.
'Export terminated successfully with warnings.' !!!I want to import into the cs2_user schema (same privileges as on the production DB) trying:impdp 'sys as sysdba'@danieldb schemas=cs2_user dumpfile=test01tables3.dmpThat gets the error: UDI-00014: invalid value for parameter, 'attach'
I then thought maybe you have to use imp/exp or impdp/expdp instead of a combination (exp + impdp) so I tried: imp 'sys/admin as sysdba'@danieldb touser=cs2_party_owner file=test01tables4.dmpbut then I just get: IMP-00022: failed to process parameters
Anyone see why its all failing? :s
Mike

you must input SID name into single-quotes like:
C:\Tools\Oracle\product\10.2.0\db\NETWORK\ADMIN>expdp 'sys/manager@stb as sysdba'
Export: Release 11.2.0.1.0 - Production on Thu Feb 9 13:46:16 2012
Copyright (c) 1982, 2009, Oracle and/or its affiliates. All rights reserved.
UDE-06550: operation generated ORACLE error 6550
ORA-06550: line 1, column 11:
PLS-00201: identifier 'SYS.DBMS_UTILITY' must be declared
ORA-06550: line 1, column 11:
PL/SQL: Statement ignored

Problems with goods movements cancelling network confirmations

Hello experts,
I'm having some problems with goods movement when cancelling network confirmations.
I assign a component for a operation in the project builder (CJ20N). Then when I execute a confirmation for that operation in CN25 everything works correctly, I can assign the time for the confirmation and SAP automatically carries the component assigned to the operation. Once I have done the confirmation the goods movements and the hours have a correct account assignment.
The problem is that if I cancel this confirmation, the hours are correctly cancelled but the component is still there. If I try to cancel the goods movement with MIGO it is no possible because the system says that must be cancelled with the corresponding transaction (CN29) but, as I have said, the system does not cancel it.
On the other hand, If the goods movement goes to COGI transaction and then I post-process the error, If later I cancel the confirmation, everything works correctly.
Does anybody know why this could happen?
Thanks and regards
Laura

Hi
I think this question was raised earlier also. The best way is to allot a fixed time slot for your users so as to avoid clash. I suppose i explained that the master data of any material is stored at one place only and if you schedule a background job for this then all your good movement transaction will be in que and performed in orderly manner.
If automatic posting is not possible then use the time slot method.
Krishna

Opacity problems with exported movie

Similar Messages

Maybe you are looking for