'oparation not supported' when select master admin in identity confi

Hi
During Identity server web based installation, when try to select master admin, received error messange "oparation not supported"
Configuration store is OID and user Store is OVD. There are no connectivity issue between OID and OVD and Ldap search performed on OVD are returning users as well.
I suspect the issue might cause by Oblix attributes in OID that are not being Indexed correctly, is there any other area that i can look into the issue?
appreciate for feedback.
thanks.

Hi,
Have a look at the OVD and OID error log files to see if you can find the offending ldap query that OAM is generating. I think you are probably right about it being a problem with one of the OAM schema attributes. Could you try including obuseraccountcontrol in your ldap search, to see if that retunrs an error?
Regards,
Colin

Similar Messages

  • I receive the error "The Selected Color Format is not supported" when I try to scan from my HP Office Jet Pro 8610.

    I receive the error "The Selected Color Format is not supported" when I try to scan from my HP Office Jet Pro 8610 using Adobe Acrobat Pro 11. I recently purchased the printer. I believe I ame using all of the defaults. How can I correct the problem?

    Hi,
    Both printer and computer seem to be on same network.
    Please download and run the following utility to troubleshoot on the issue.
    http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03275041&cc=us&dlc=en&jumpid=reg_r1002_usen_c-0...
    Also download and install the firmware update from the link below.
    http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=mp-89897-4&cc=us&dlc=en&lc=en&...
    Although I am an HP employee, I am speaking for myself and not for HP.
    --Say "Thanks" by clicking the Kudos Star in the post that helped you.
    --Please mark the post that solves your problem as "Accepted Solution"

  • Keep getting accessory not supported when charging in romania.  I have a converter for wall and a att USB cord

    Keepgettimg accessory not supported when charging in romania. I have all the correct connections. ie wall converter, USB cord etc.

    If you know the IP address of the printer, then you can check if there is a working path between the Mac and printer. This can be done using Network Utility or a web browser.
    If you open Network Utility and select the Ping tab, you can enter the IP address of the Kodak and then press the Ping button. If there is a working connection then you should get a reply to each packet sent.
    With the web browser, many devices have a built-in web server so you can type the IP address of the printer into the browser and if there is a working connection then you will open the printers web page.
    So, are you able to confirm you have a working connection between the Mac and printer?

  • Are .mp4 files not supported when trying to merge 2 videos into 1 video?

    Are .mp4 files not supported when trying to merge 2 videos into 1 video? The steps in the manual seem simple enough.  But the paste function won't work on the 1st video after selecting all and then copy on the 2nd video.

    There are 9 different versions of iPhoto and they run on eight different versions of the Operating System. The tricks and tips for dealing with issues vary from version to version and OS to OS. So before anyone can help, they need information to work with. Things like:
    - What version of iPhoto.
    - What version of the Operating System.
    - Details. What were you doing when the problem arose?
    - Did it ever work properly?
    - Are there error messages?
    - What steps have you tried already to solve the issue.
    Anything else you can think of that might allow someone else to understand your issue.

  • Sub-items not supported for selected item(s) error in LSMW

    Hi gurus,
    Am working on BOM's data load via LSMW. Most of the item are stock items (L) but some of the items i am loading are Text items (T). Because of the customizing done in OS13 (that can't be changed apparently), the LSMW executed in foreground gives the message "Sub-items not supported for selected item(s)" (only as information, green message) and the dataload IS STOPPED.
    Is there a way to :
    -> change OS13 (allow sub-items for text items) : When i try i have an error message.
    -> or to force LSMW program no to go on the sub items screens (this way the program does not stop and the BOM is created)
    Thanks in advance for your answers,
    Olivier

    Found the solution my self all relations between dataload file and sub-items structure had to be suppressed in LSMW.

  • My hp4530s wifi switch does not enable when selected

    hp4530s with windows 7 prof. The wifi switch does not enable when selected in mobility manager in the control panel. The option is shown, however is grayed out and does not enable the wifi

    Hi,
    When was the last time that WIFI worked on the HP4530s?  If you aer using a dock, then remove the laptop from the dock.
    You can check the status of the WIFI adapter in Device Manager.  You should have something similar to the below image if your model is equipped with WIFI.
    The HP Support Assistant and also be used to troubleshoot network issues.
    Look under the Internet and Security topics in HPSA for the adapter.
    Try diagnostics under the My computer tab in HPSA
    HP DV9700, t9300, Nvidia 8600, 4GB, Crucial C300 128GB SSD
    HP Photosmart Premium C309G, HP Photosmart 6520
    HP Touchpad, HP Chromebook 11
    Custom i7-4770k,Z-87, 8GB, Vertex 3 SSD, Samsung EVO SSD, Corsair HX650,GTX 760
    Custom i7-4790k,Z-97, 16GB, Vertex 3 SSD, Plextor M.2 SSD, Samsung EVO SSD, Corsair HX650, GTX 660TI
    Windows 7/8 UEFI/Legacy mode, MBR/GPT

  • Why does my macbook pro keeping saying it is not supported when I try to connect it to other devices?

    My macbook pro keeps saying its not supported when i try to transfer images and stuff from my macbook pro to my iphone 4. What do I do?

    First, put your images into iPhoto or into a separate folder. Open iTunes and connect your phone. Select the iPhone under the Devices section of iTunes' sidebar. Click on the Photos tab in iTunes' main window. From the dropdown menu you can select iPhoto or some other folder from which to sync the photos to your phone.

  • "charging is not supported" when using the cable that came with ipod

    I get an error message that "charging is not supported" when plugged in using the only cable that came with my ipod touch. My ipod will charge for 5 minutes then when I check on it, I notice this error on screen and the ipod has stopped charging.  I'm using the same charging method I have always used since I owned this ipod which has been over 2 years now and this only started happening recently. I believe this started when I upgraded to 5.0.1.

    - Look at both partsof the 30 pin dock connector.  Log for bent. mising or corroded contacts of orther abnormalities. The cable could be bad.  Try a new one.
    - Try a reset. Nothings is lost.
    Reset iPod touch:  Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.

  • IPod Nano 7th Gen says "Unsupported. Accessory is not supported" when trying to charge / sync

    iPod Nano 7th Gen says "Unsupported. Accessory is not supported" when trying to charge / sync with official apple lightening cable.
    It worked for almost a year then suddenly began to say that. My computer [windows], lightening cable and my power brick [all apple official] are all the same as they were when it was working. The iPod is almost a year old now, and has worked perfectly up until about a week ago.
    I have tried resetting the iPod, plugging it into different charging sources but it keeps saying "Unsupported. Accessory is not supported"
    Does anyone have any ideas on how to fix it?
    Thanks.

    Your iPod Nano firmware and iTunes updated to the current versions? 
    It is very difficult to offer troubleshooting suggestions when the "os version" you are using is unknown as each os has their own troubleshooting solutions. 

  • I have a vizio led 26" but displays not support when I connect to my MacBook pro

    I have a vizio led 26" but displays not support when I connect to my MacBook pro

    Hello, Benlot.
    You may find this article helpful in troubleshooting the external display issue.
    Apple computers: Troubleshooting issues with video on internal or external displays
    http://support.apple.com/kb/ht1573
    Cheers,
    Jason H.

  • Tv not supported when connecting HDMI to ipad 30 pin connector running ios 8

    tv not supported when connecting HDMI to ipad-2 30 pin connector running ios 8.  Was working fine with ios 7.

    Hello,
    I need to conect it to either a mouse or an OLED display to transfer the content I was going to use thee standard charging USB to a port splitter and sending it from there but I wanted to check before I did something stupid.
    Thanks.
    James

  • Why charger saying not supported when it is a genuine apple charger

    Why charger saying not supported when it is a genuine apple charger

    Do you mean the AC wall adapter or the cable when you say "charger"? Neither is a charger; the charger is built into the phone. You need to do some basic troubleshooting. First, try a different cable with the same AC adapter. Then try a different USB source such as the USB port on your computer. If you get the same message after both tests the problem lies in the phone. The most common cause of this message is dirt, moisture or pocket lint in the lightning connector on the bottom of the phone. Inspect it with a bright light and clean it with a plastic or wood toothpick. If none of these steps resolve the problem take the phone, cable and adapter to an Apple store for diagnosis. Make an appointment first: http://concierge.apple.com/reservation/us/en/techsupport/
    Note: You should register the iPhone on Apple's website first, if it isn't already registered: https://supportprofile.apple.com/. This will speed up the appointment process.

  • MetaData operations are not supported when

    Dear Experts
    I am facing below error when trying to run my add-on in Windows  Server 2008 R2 and SQL Server 2008 service pack 2.
    Error: MetaData operations are not supported when a user transaction is active
    It runs fine in Sql Server 2005.
    Kindly tell me a solution to sort this out.
    Regards
    Shibin

    Can we see your code, it looks to me like the error is quite descriptive - its saying you can't do any metadata operation (creating/updating user fields, user tables using userfieldsMD or usertablesMD objects) while in a transaction.
    Previous SDK examples have shown that you can do it, but they it is not possible - it may be that SQL 2008 has a tighter control over this. (Did you also do a B1 upgrade, or just change SQL version?)
    Are you running a transaction?

  • My July 2009 iMac with OSX Mavericks "iMac is not supported" when I tried to perform bluetooth with my iPhone 5. What is the problem. thanks

    My July 2009 iMac with OSX Mavericks "iMac is not supported" when I tried to perform bluetooth with my iPhone 5. What is the problem. thanks

    Bluetooth is only supported for tethering.
    Barry

  • Sometimes I get a message that reads " UNSUPPORTED Accessory is not supported" when I plug in my bluetooth transmitter to my gen 6 nano. Other times it works fine. Is there a fix for this?

    Sometimes I get a message that reads " UNSUPPORTED Accessory is not supported" when I plug in my bluetooth transmitter to my gen 6 nano. Other times it works fine. Is there a fix for this?

    Have you checker the connectors on both the transmitter and Nano for any signs of damaged, corroded pins?  It might help to take a can of compressed air to each.  The error message may be simply a result of the iPod Nano not getting a full connection with the transmitter at first.
    B-rock

Maybe you are looking for