Opatch for Oracle 10.2.0.4 on Windows NT_I386

Hi!
We have some SAP systems running with Oracle release 10.2.0.2 on Windows NT_I386
First of all we upgraded these systems to the oracle version 10.2.0.4 with Oracle Assistant.
After this we installed Opatch 5.
Now we installed Patch collection 30 (10204_Patch30_WIN32.zip (Patch: 9169457)
Question:
Do we need to apply also Patch 27? ( 10204_Patch27_WIN32.zip (Patch: 8932174))
Or does the Patch 30 contain Patch 27 (is cumulative)?
Thank you!

Hello Holger,
Sapnote #839187 answers your question
Bundle patch (Windows)
This is a patch collection to correct several errors (this is also known as a "patch collection" inthe SAP environment).
You must use OPatch to apply it.
You can apply only one Windows bundle patch at a time. You may also be able to apply generic patches inaddition to the bundle patch (see the "Generic patch" section).
When you apply a bundle patch, the Oracle version changes (from 10.2.0.4.17 to 10.2.0.4.18). You can use DBA_REGISTRY_HISTORYto determine which bundle patch has been applied.
Windows bundle patches are cumulative (that is, bundle patch 18 also contains all of the corrections from bundle patch 17 and the current CPU).
Regards
Stefan

Similar Messages

OPatch for oracle 9204

i need OPatch for oracle 9204 can someone tell me where i have to down load.

Do you have a support contract? If so, you can download patches from Metalink. Note that this is a controlled option; the person who administers your organisation's Metalink account might not have authorised your user to download patches.
If you don't have a support contract then your are restricted to what's available from OTN. If what you want isn't there you're probably out of luck.
Cheers, APC

EM is not running for Oracle 10.2.0.5 on windows 2008 R2

Hi,
Recently, I installed oracle 10.2.0.4 on Windows 2008 R2 server followed by 10.2.0.5 patchset and 8350262 patch (to solve the problem of the expired certificate).
After the installation, I created listener and database. The EM was working fine for few hours but not running after that. Listener was running all the times.
I tried to to execute "emctl stop dbconsole" and "emctl start dbconsole".
The EM worked again. However, it down again after few hours. I have repeated this process many times but still cannot resolve the this.
I checked the logfiles in in the sysman/log. Herewith the output.
emagent.trc
2013-06-17 11:05:24 Thread-4100 WARN http: snmehl_connect: connect failed to (dkcopeoradb001.FALCKDKWEB:1158): No connection could be made because the target machine actively refused it.
(error = 10061)
2013-06-17 11:09:27 Thread-3520 ERROR ssl: nzos_Handshake failed, ret=28862
2013-06-17 11:09:27 Thread-3520 ERROR http: 296: Unable to initialize ssl connection with server, aborting connection attempt
Please advise and assist.
Thanks.
Regards,
Jia

70d23884-cf5e-4be4-9c7b-5572c797bae9 wrote:
Hi,
Recently, I installed oracle 10.2.0.4 on Windows 2008 R2 server followed by 10.2.0.5 patchset and 8350262 patch (to solve the problem of the expired certificate).
After the installation, I created listener and database. The EM was working fine for few hours but not running after that. Listener was running all the times.
I tried to to execute "emctl stop dbconsole" and "emctl start dbconsole".
The EM worked again. However, it down again after few hours. I have repeated this process many times but still cannot resolve the this.
I checked the logfiles in in the sysman/log. Herewith the output.
emagent.trc
2013-06-17 11:05:24 Thread-4100 WARN http: snmehl_connect: connect failed to (dkcopeoradb001.FALCKDKWEB:1158): No connection could be made because the target machine actively refused it.
(error = 10061)
2013-06-17 11:09:27 Thread-3520 ERROR ssl: nzos_Handshake failed, ret=28862
2013-06-17 11:09:27 Thread-3520 ERROR http: 296: Unable to initialize ssl connection with server, aborting connection attempt
Please advise and assist.
Thanks.
Regards,
Jia
Why are you bothering to install a de-supported version of Oracle? 10.2 is history and even 11.2 is at terminal release. The bookies are taking money on when 12c will be released.
When I googled "No connection could be made because the target machine actively refused it." I got many, many hits that look useful.

How to Stage directory for Oracle EBS R12.1.1 on Window Server 2008 ?

Hi Every Body,
1- How to Stage directory for Oracle EBS R12.1.1 downloaded from e-delivery.com on Window Server 2008.?
-- I have download all files from e-delivery and check the md5 and all files are OK.
I extracted the entire files with winrar program to the same directory and during the unzipping I was notified to replace these files (dvd.label and component.label) and I agreed each time. So >>
2- Was that a problem ?
-- I have setup vc++ from VS6 , the sp6, cygwin , ... and set up the active directory and the domain.. and all other requirements.
BUT when i started the ebs set up it raise the "*Os User and Group Check*" error.
even if I am the only user and sure I am the Administrator. and also I run this Command to be sure
C:\>net localgroup administrators and it said that the administrator is one of the administrators group.
3- Somebody said that I have to change the temp and tmp folder to be on c:\ drive >> might this solve the problem?
thanks in advance.

Hi,
Most of the instructions you have mentioned , already was configured.
except for the tmp and temp directories.
And even I changed them from System Properties >> Advanced >> Environment Variable under User variable for Administrator and System variables , the problem still exist Os User and Group Check .
I attach the conf_VIS.txt file because I thought it may help.
http://www.4shared.com/document/1bS6aio5/conf_VIS.html
Actually I am not sure about the rapid install patch version but I have download the EBS R12 from the following link and I think it contains the recent installer version
Link >> Oracle E-Business Suite Release 12.1.1 Media Pack for Microsoft Windows (32-bit)
http://edelivery.oracle.com/EPD/Download/get_form?egroup_aru_number=11250138
Note If you still can not open the link just suggest a suitable file hosting and I will upload to you. here I used 4shared and hoped it suits you.

NTLM module for oracle 10g Release 2 Apache on Windows 2003

Hi,
I want to implement autologon on my HTML DB application depending on the Windows username. I understand that I can implement this feature with the Apache module modntlm.
Is there anyone who has got this working on Windows 2003 Server in combination with Oracle 10g Release 2 Apache on Windows 2003.
Which version NTLM software do I need and where can I download the version for Windows 2003 server?

Nothing fantastic, we have the username/id passed in from the linking application (company intranet) as part of the URL. The process is invisible to the end-user. Possibly not ideal if you want really tight security/authentication, but it was sufficient for our needs, and the problems we had previously where users were unable to use the application have disappeared. I'd like to know the reasons for the problems we had with mod_ntlm (running on AIX), but it was more important to
me to deliver a working app than to spend time resolving probelms in 3rd party software.
Cheers.

Download link or patch number for Oracle 10.2.0.1 on Windows 2008 R2-64-bit

Hello Guys,
These days i cant find a link in Technology Network to download Oracle 10g for Windows Server 2008 R2-64 bit. please help me with this as i am in need of 64-bit software.
Thank U

10g is out of support now .. If you need it go to MOS Site and Open SR

Can't Recorde Response file for Oracle client 11.2.0.3 windows 32bit

Hello
We are going to upgrade our Oracle client on our clients to 11.2.0.3. But I can not record a resopnsfile with setup.exe.
Have Oracle removed this feature?
Here's a dump from setup.exe -help
There is no possibility to run setup.exe witch -record -destinationfile option
Preparing to launch Oracle Universal Installer from C:\Users\Test\AppData\Local\
Temp\OraInstall2013-01-14_02-12-48PM. Please wait ... Usage:
setup [-options] [(<CommandLineVariable=Value>)*]
Where options include:
-clusterware oracle.crs,<crs version>
Version of Cluster ready services installed.
-crsLocation <Path>
Used only for cluster installs, specifies the path to the crs home locat
ion. Specifying this overrides CRS information obtained from central inventory.
-invPtrLoc <full path of oraInst.loc>
Unix only. To point to a different inventory location. The orainst.loc f
ile contains:
inventory_loc=<location of central inventory>
inst_group=<>
-jreLoc <location>
Path where Java Runtime Environment is installed. OUI cannot be run with
out it.
-logLevel <level>
To filter log messages that have a lesser priority level than <level>. V
alid options are: severe, warning, info, config, fine, finer, finest, basic, gen
eral, detailed, trace. The use of basic, general, detailed, trace is deprecated.
-paramFile <location of file>
Specify location of oraparam.ini file to be used by OUI.
-responseFile <Path>
Specifies the response file and path to use.
-attachHome
For attaching homes to the OUI inventory.
-cfs
Indicates that the Oracle home specified is on cluster file system (shar
ed). This is mandatory when '-local' is specified so that Oracle Universal Insta
ller can register the home appropriately into the inventory.
-clone
For making an Oracle Home copy match its current environment.
-debug
For getting the debug information from OUI.
-detachHome
For detaching homes from the OUI inventory without deleting inventory di
rectory inside Oracle home.
-enableRollingUpgrade
Used in cluster environment, to enable upgrade of a product on a subset
of nodes (on which the product was installed).
-executeSysPrereqs
Execute system pre-requisite checks and exit.
-force
Allowing silent mode installation into a non-empty directory.
-help
Displays above usage.
-ignoreSysPrereqs
For ignoring the results of the system pre-requisite checks.
-local
Performs the operation on the local node irrespective of the cluster nod
es specified.
-printdiskusage
Log debug information for disk usage.
-printmemory
Log debug information for memory usage.
-printtime
Log debug information for time usage.
-relink
For performing relink actions on the oracle home
Usage: -relink -maketargetsxml <location of maketargetsxml> [-makedepsx
ml <location of makedepsxml>] [name=value]
-silent
For silent mode operations, the inputs can be a response file or a list
of command line variable value pairs.
-waitforcompletion
Installer will wait for completion instead of spawning the java engine a
nd exiting.
-suppressPreCopyScript
Suppress the execution of precopy script.
-acceptUntrustedCertificates
Accept untrusted certificates from a secure site.
-suppressPostCopyScript
Suppress the execution of postcopy script.
-noconfig
Do not execute config tools.
-noconsole
For suppressing display of messages to console. Console is not allocated
-formCluster
To install the Oracle clusterware in order to form the cluster.
-remotecp <Path>
Unix specific option. Used only for cluster installs, specifies the path
to the remote copy program on the local cluster node.
-remoteshell <Path>
Unix specific option. Used only for cluster installs, specifies the path
to the remote shell program on the local cluster node.
-executePrereqs
To execute only the prerequisite checks.
-ignorePrereq
To ignore running the prerequisite checks.
-ignoreInternalDriverError
To ignore any internal driver errors.
-downloadUpdates
To download updates only.
-showProgress
To show the installation progress on the console. This option is support
ed only in case of silent installation.
Command Line Variables Usage
Command line variables are specified using <name=value>; for example:
[ session: | compName: | compName:version: ]variableName=" valueOfVariable"]
Session/Installer variables are specified using:
[session:]varName=value
Ex 1: session:ORACLE_HOME_NAME="OraHome"
Ex 2: ORACLE_HOME_NAME="OraHome"
The lookup order is session:varName then just varName. The session prefix is
used to avoid ambiguity.
Component variables are specified using:
[compInternalName:[Version:]]varName
Ex 1: oracle.comp1:1.0.1:varName="VarValue"
Ex 2: oracle.comp1:varName="VarValue"
The lookup order is compInternalName:Version:varName, then compInternalName:
varName, then just varName.
Please press Enter to exit...

Hi,
There is no record option with 11gR2.
There is no need to use '-record' flag to record/save the response file. At Summary page of installation, 11gR2 installer provides option to save the response file. We can perfom the silent installation using this saved response file
Unix:
./runInstaller -silent -responseFile <saved_response-file>
Windows:
c:\software\11.2.0.1\database\setup.exe -responseFile <saved_response-file>
For more details, kindly refer
11gR2 Install (Non-RAC): Understanding New Changes With All New 11.2 Installer (Doc ID 884232.1)
4th point in the document explains about this
Thanks,
Krishna

Issues with installing Time zone patch for Oracle 10.1.0.4 in Windows

All,
I have a working Oracle 10.1.0.4 installation on Windows box, I successfully patched the time zone patches(5865568 and 5126270), OPatch successfully installed the patch. But when I verified if the patch was installed, it says the patch is not installed. I wonder if any one else had this issue.
The only difference in my installation was that my database does not use INIT.ORA but uses SPFILE.
The Post Installation steps called to make certain parameter changes in INIT.ORA and restart the database. In my case I did not do this.
Any ideas?
thx
SS

I'm about to install this patch also. If I'm using an spfile I'll need to create pfile from spfile and modify the parameters in the pfile. When I then restart the database in migrate mode I must then say that I'd like to start using the pfile. Am I correct in assuming this??
OR since I know that I'm using an spfile I could alter the spfile and use whats below. After I restart I can then take out these changes.
ALTER SYSTEM SET system_trig_enabled=FALSE, JOB_QUEUE_PROCESSES=0, AQ_TM_PROCESSES=0
COMMENT='Change To Take Effect After Jan 1 Reboot'
SCOPE=SPFILE;
thanks.
Message was edited by:
Bogey

Suggestions for Oracle 10g Installation using VMware in Windows XP.

Hi All,
I am using Intel(R) Core (TM) 2 Duo CPU P8600 @2.4 Ghz with 1.98 GB RAM with Windows XP with 70 GB disk space. I would like to install a 2 node RAC with ASM and if possible also configure a DG for learning and testing purpose.Please advice if this will work using a VMware . Is RAC VM possible only Linux or with Windows as well ?
I think 11g is out of scope since i don't have sufficient memory.
I am new to VMware and have not done any installations or used it till now.
It would be appreciated if you could help with these doubts.
1. How much memory can be allocated to each instances?If i am installing Linux how much memory is required ?
2. what will be the load on the CPU and will i be able to use it without any resource crunch ?
3.Once memory is allocated to VM, can it be claimed back , is it like if i am not starting the VMware services.. i have the full 2 GB in discretion?
4. Can 10g Standard editions be used for learning purposes?
If the above hardware is not sufficient, please suggest a suitable configuration
Hari
Edited by: Hari2012 on May 27, 2012 12:24 AM

You do not have sufficient hardware - you will likely need 6GB of RAM or more, plus 100G of disk or more and a multiprocessor machine. Each VM will need at least 2GB of RAM, and once all of the VMs/RAC are installed, the system will be pretty busy running 3 OS's (host and two guests) and two databases. If you do not start up the VMs, all of the memory is available for the host to use. 10g is no longer available for download, you will have to use 11g - yes SE edition is sufficient for learning purposes.
Re: Oracle RAC Desktop Setup
HTH
Srini

Replace a new wallet for Oracle Wallet Manager

Hi, all,
Here is my current situation.
We are using Oracle Wallet Manager (version 10.1.0.5) for Oracle 10.1.3.1 on Windows Server 2003. Currently our SSL certificate in the wallet is going to expired within a month. However, we forgot the password to the current wallet. So we have to create a new wallet and import the new certificates. The certificate shows Ready state. Then we moved the old wallet file to a different directory, and copied the new wallet file, ewallet.p12, to the default wallet location, C:\product\10.1.3.1\OracleAS_1\Apache\Apache\conf\ssl.wlt\default. We also rebooted the machine to make sure Apache will pick up the new wallet file. However, when we connected from a client browser, it still shows old certificate. I checked the ssl.conf, it still have the default value as follows:
SSLWallet file:C:\product\10.1.3.1\OracleAS_1\Apache\Apache\conf\ssl.wlt\default
The Auto Login and Use Windows Registry options are uncheck and there is no Oracle wallet entry in the Windows registry.
Does anyone have the similar problem? Any advice is highly appreciated.
Thank you very much in advance.

Roberto,
Thanks a lot for your response. I have one more question.
Supposed the client browser has installed the old certificate which is still valid for another month, when the client browser hit the site again, as the old certificate is still valid, is it going to download the new certificate? If not, how do I remove the old certificate from browser, IE?
Thanks.

Current Patch Set for Oracle Database Release 11.2

Hi
I am upgrading oracle 10G to 11GR2 in AIX 5.3 Environment with SAP ECC6 , I have just just installled Oracle 11.2.0.1.0 according to the "Database Upgrade Guide -Upgrade to Oracle Database 11g Release 2 (11.2): UNIX". After database software installation , in upgrade manual in section 3.4.4 it says, you need to install current patch set for oracle database 11g R2 and referencing a SAP note 1431799.
I have just read note 1431799 which says Current Patch Set for Oracle Database Release 11.2 is not generally available for SAP customers until December 2010, also I donu2019t find the note 1522330 as mentioned in 1431799.
Please let me know how I can get current patch set to apply with Oracle 11.2.0.1.0 (Is it in SAP service market place?)
I also want to upgrade my installation to oracle 11.2.0.2, please let me know where I get the patch set to upgrade from 11.2.0.1.0 to 11.2.0.2,
or
I have to live with 11.2.0.1.0 and apply SAP Bundle Patch ( SBP)

Abu Al MAmun,
I understand from your posts that you recently upgraded to 11.2.0.2.
I am having the same difficulty, of finding the current patch set for 11.2. Could you please let me know how you worked around it?
Thanks,
Siri
Hello Everyone,
I did read the post on to how you have to install the current patch set for 11.2.
But honestly, it pretty much flew over my head.
I am trying to upgrade our SAP AIX 64 bit test system from Oracle 10.2.0.4 to 11.2.0.2.
And so far I have downloaded all the required sw for the upgrade, except for the current patch set 11.2.
This is what I have right now:
1) Oracle 11.2 AIX 64 bit upgrade sw - 51038805_part 1 to 51038805_part 7 and 51039800.
2) Database Patches -->Oracle 11.2.0.2 -->
All they have here is
a. Database RDMBS - SAP_112020_201012_AIX.zip and b. SAP_112020_201101_AIX.zip
b. OPatch - OPatch_11201_Generic_v3.zip and mopatch-2_1_6.zip
c. Database Vault - DV - >Generic - p9656644_112020_Generic.zip
If I am not wrong, the Database RDBMS files are nothing but the SAP Bundle Patches that have to be installed after installing the currrent patch set 11.2.0.2 using MOPatch.
But I did not find the currrent patch set 11.2.0.2.
Could someone please explain the process to me in detail? This being my first time , I am finding it a bit hard to catch up with some of the stuff.
Thank You!
Siri

Upgrading oracle database 9.2.0.5 to 9.2.0.8 for Oracle E-Business suite

I have applied patch to upgrade Oracle E-business suite(11.5.10) database from 9.2.0.5 to 9.2.0.8. but after applying patch also it showing 9.2.0.5. please help me.

Thanks Hussain for ur reply
server OS is windows server 2003 std. i have performed following steps
1.     First I installed 11.5.10.2 Technology Stack Validation Patch (Revision 1 July, 2005) on both application (D:\Oracle\visappl) and database (D:\oracle\Visdb\9.2.0) home. (p4318672_11i_GENERIC.zip)
2.     Then I review the html log file generated for both the home. Html file generated for oracle home with ALL PASS status. But html file for DBMS oracle home has return FAIL status. I review the reason in txkVal11510MP_DB.html. it gives me following reason to fail
“11.5.10.2 requires that your Oracle 9iR2 database version to be 9.2.0.6.0 or higher on Windows platform. Please refer to Oracle MetaLink Note 216550.1 "Oracle Applications Release 11i with Oracle 9i Release 2 (9.2.0)" to upgrade to the latest certified version of Oracle 9iR2. After upgrading to 9.2.0.6, you must apply 9.2.0.6 patch 5 ( 4287598 ) before upgrading to 11.5.10.2. “
3.     I went through the Metalink Note 216550.1. I refer Section 2 of it. I applied patch 5035661. when I applied this patch , output of this patch mentioned that OUI 2.2 is already installed on both the Home.
4.     Then I applied 9.2.0.6 patch 5 (4287598). Prior to this I applied patch 2617419 because patch 4287598 require OPatch 1.0.0.0.52.
5.     I performed patch 4287598 post installation task also. I didn’t apply windows patch 6, because my database was not showing 9.2.0.8 as required by windows patch 6.
6.     so this is the complete task list I have done to upgrade database from 9.2.0.5 to 9.2.0.8
output of given query is as below:
Oracle9i Catalog Views     9.2.0.5.0     VALID
Oracle9i Packages and Types     9.2.0.5.0     VALID
Oracle9i Real Application Clusters     9.2.0.5.0     INVALID
JServer JAVA Virtual Machine     9.2.0.5.0     VALID
Oracle XDK for Java     9.2.0.7.0     VALID
Oracle9i Java Packages     9.2.0.5.0     VALID
Oracle interMedia     9.2.0.1.0     LOADED
Spatial     9.2.0.5.0     VALID
Oracle Text     9.2.0.5.0     VALID
OLAP Analytic Workspace     9.2.0.5.0     LOADED
Oracle OLAP API     9.2.0.5.0     LOADED
OLAP Catalog     9.2.0.5.0     VALID

Note 830576 - Parameter recommendations for Oracle 10g

hi all DBA experts.
I am not good familiar with Oracle database while i read a Note 830576 - Parameter recommendations for Oracle 10g. in which SAP General Recommendation:
You should delete obsolete initialization parameters from the profile.
To determine which obsolete parameters are currently set, proceed as follows:
SQL> SELECT NAME FROM V$OBSOLETE_PARAMETER WHERE ISSPECIFIED = 'TRUE';
when i execute above command then result is no rows selected
while there are many parameters in above SAP Note which are already obsolete and not set in initSID.ora file.
for exp. the parameter OPTIMIZER_INDEX_COST_ADJ is showing
#### OPTIMIZER MODE
#optimizer_index_cost_adj = 10
as you know that this parameter is very important regarding System Performance.
now please guide me . I have to set these parameter or no need while there is not showing any parameters against obsolete command.
waiting you valuable reply.
Regards,

hi both,
thanks for knowledge sharing with me other SDN users,
Dear Orkun,
Ok. At this stage, I can recommend you that apply what they have suggested,
in the message. So, you already did a part of it by configuring
Oracle parameters, already.
SAP support sent me this file (PRD_Parameters)
*** INFORMATION 1 ***
*** INFORMATION 2 ***
*** INFORMATION 3 ***
*** INFORMATION 4 ***
*** INFORMATION 5 ***
*** INFORMATION 6 ***
*** INFORMATION 7 ***
*** INFORMATION 8 ***
*** INFORMATION 9 ***
*** INFORMATION 10 ***
*** INFORMATION 11 ***
_b_tree_bitmap_plans
_fix_control (4728348)
event (10753)
event (38087)
event (10183)
optimizer_index_cost_adj
star_transformation_enabled
event (10027)
event (10028)
event (10411)
event (10629)
event (14532)
_fix_control (5705630)
_fix_control (5765456)
_optimizer_mjc_enabled
_sort_elimination_cost_ratio
event (10091)
event (10142)
event (38068)
event (38085)
event (44951)
parallel_execution_message_size
parallel_threads_per_cpu
query_rewrite_enabled
log_archive_dest_1
log_archive_format
max_dump_file_size
optimizer_features_enable
log_archive_dest
_push_join_union_view
_cursor_features_enabled
_first_spare_parameter
event (10049)
db_writer_processes
parallel_max_servers
db_cache_size
pga_aggregate_target
processes
sessions
dml_locks
job_queue_processes
log_checkpoint_interval
remote_login_passwordfile
sga_max_size
shared_pool_reserved_size
sort_area_retained_size
sort_area_size
statistics_level
workarea_size_policy
they only highlighted these following parameters from above
**** INFORMATION 8 *** DB Patchset: 10.2.0.4.0
**** INFORMATION 9 *** DB Mergefix: 0 (released before 2008-07-11)
FYI... recently, i applied the Oracle Patches 10.2.0.4 in this sequence
MS Windows x86-64 (64-bit)
Patchset_10204_MSWIN-x86-64aa.bin
Patchset_10204_MSWIN-x86-64ab.bin
Patchset_10204_MSWIN-x86-64ac.bin
OPatch
OPatch_10205_Generic_v0.zip
Generic (32-bit / 64-bit)
p8350262_10204_Generic.zip
p7592030_10204_WIN_GENERIC.zip
p9254968_10204_WIN_GENERIC.zip
10204_Patch44_MSWIN-x86-64.zip
p9584028_102040_Generic.zip
p9843740_10204_Generic.zip
and please tell me , still i have to apply highlighted parameters or now no need.
Regards,

Install the latest patch set for Oracle 10.2.0.4.0

I install SAP PI 7.1 EHP1 on Windows Server 2008 (RC1).
I already installed Oracle DB software 10.2.0.4.0
Now I would like to install the latest set for Oracle 10.2.0.4.0
I downloaded the following files from Service Marketplace:
- p8559467_10204_MS_WINX8664.zip
-p7592030_10204_WIN_GENERIC.zip
- Opatch_10204_Generic_v5.zip
- and 3 Patchset files (Patchset_10204MSWINX8664aa.bin, Patchset_10204MSWINX8664ab.bin, Patchset_10204MSWINX8664ac.bin )
Question:
1) What is the procedure/order to install the patch set?
2) Where (in which directory) should I put the 3 Patchset files and which commando should be used here (opathc apply)?
Thank you!

> - p8559467_10204_MS_WINX8664.zip
> -p7592030_10204_WIN_GENERIC.zip
> - Opatch_10204_Generic_v5.zip
> - and 3 Patchset files (Patchset_10204MSWINX8664aa.bin, Patchset_10204MSWINX8664ab.bin, Patchset_10204MSWINX8664ac.bin )
That one is for updates 10.2.0.<4 to 10.2.0.4. Since you are already on 10.2.0.4 that one is no more necessary.
> 1) What is the procedure/order to install the patch set?
> 2) Where (in which directory) should I put the 3 Patchset files and which commando should be used here (opathc apply)?
See Note 1137346 - Oracle 10.2.0: Patches/patch collections for Oracle 10.2.0.4
Basically you will
- patch Opatch
- unzip the patch to a directory where <sid>adm has access
- stop all Oracle Services
- then execute opatch apply
Markus

Applying oracle patch set for Oracle 10.2.0.4

Hi All,
I need some clarification on below suggestions from SAP,
<div class="jive-quote">there is also no optimizer mergefix installed in the database. This can lead to big performance problems due to wrong Oracle Cost Based Optimizer decisions. SAP therefore requires the installation of so called SAP Bundle Patches. Please refer to
SAP note #1137346 - Oracle 10.2.0: Patches/patch collections for Oracle 10.2.
It is mandatory to install the most current available SBP in SAP environments.</div>
I have Oracle 10.2.0.4 and AIX 6.1 for my all SAP systems, please guide me what exact steps I have to follow, as this note contains information about the relased oracle patch set but doesnt have information about how to apply.
I never applied any oracle patch set before and very new to all this, so your solution will help me a lot in this task.
Regards,
Ramesh.

ramesh_basis wrote:
Hi All,
>
> I need some clarification on below suggestions from SAP,
>
> <div class="jive-quote">there is also no optimizer mergefix installed in the database. This can lead to big performance problems due to wrong Oracle Cost Based Optimizer decisions. SAP therefore requires the installation of so called SAP Bundle Patches. Please refer to
> SAP note #1137346 - Oracle 10.2.0: Patches/patch collections for Oracle 10.2.
> It is mandatory to install the most current available SBP in SAP environments.</div>
>
> I have Oracle 10.2.0.4 and AIX 6.1 for my all SAP systems, please guide me what exact steps I have to follow, as this note contains information about the relased oracle patch set but doesnt have information about how to apply.
>
> I never applied any oracle patch set before and very new to all this, so your solution will help me a lot in this task.
>
> Regards,
> Ramesh.
Hi Ramesh,
Firstly, go to "http://service.sap.com/swdc -> Software Downloads -> Database Patches -> Oracle -> Oracle 10.2.0.4 -> OPatch" then download and install OPatch_10205_Generic_v0.zip
Secondly, go to "http://service.sap.com/swdc -> Software Downloads -> Database Patches -> Oracle -> Oracle 10.2.0.4 -> Database RDBMS -> Generic (32-bit / 64-bit)" then download and install "Pre-Upgrade Information Utility utlu102i.sql (zipped)" and "p8350262_10204_Generic.zip"
Thirdly, "http://service.sap.com/swdc -> Software Downloads -> Database Patches -> Oracle -> Oracle 10.2.0.4 -> Database RDBMS -> AIX5L (64-bit)" then download and install "SAP_102048_201106_AIX.zip"
You can find readme fles in the zip files.
Best regards,
Orkun Gedik

Opatch for Oracle 10.2.0.4 on Windows NT_I386

Similar Messages

Maybe you are looking for