OPC Server Not going to active state

When we add a single virtual Analog input channel on a PXI 4351 card the opc sevrer cannot be started by the tag engine. The error message is that it cannot be set to the active state. Removing the single analog input channel solves the problem. We have 100 tags 6 of them are analog and the remainder digital i/o. Does anybody know how to get the opc server to accept the new channel?

Similar Messages

No way to publish a workflow, I get this error: System.InvalidOperationException: Operation failed with error Microsoft.Workflow.Client.ScopeInactiveException: Scope ... is not in an active state. Its current state is 'Unregistering'

Hi,
I'm using Project Server 2013 and I'm not able to publish a workflow in SharePoint Designer 2013, I get this error:
System.InvalidOperationException: Operation failed with error Microsoft.Workflow.Client.ScopeInactiveException: Scope '/SharePoint/default/d7feb9ea-ccb2-4ec3-8f89-2a45b6cf3777' is not in an active state. Its current
state is 'Unregistering'. HTTP headers received from the server - ActivityId: c47ef567-8c54-4ae0-9a1a-1e4fb51320d8. NodeId: TestServer. Scope: /SharePoint/default/d7feb9ea-ccb2-4ec3-8f89-2a45b6cf3777. Client ActivityId : c6e5979c-20f8-e042-1f9d-2cb2a25d7f9e.
---> System.Net.WebExceptio
The thing is that I transferred the databases from a Prod.Env. to the Test Env. and from that moment on the Test Env. stopped working (only workflows), then I
was thinking that maybe the workflow is not working in the Test Environment because when I transferred the databases from Prod Env to Test Env I didn’t transfer the databases related to workflow, I only transferred:
WSS_Content
PWA_ServiceDB
But I didn’t transfer:
SBGatewayDatabase
SBManagementDB
SBMessageContainer01
WFInstanceManagementDB
WFManagementDB
WFResourceManagementDB
I didn’t transfer them because, before, when I transferred DB’s in version 2010, these DB’s were not needed, as the workflows were done using another method.
So, I tried to create a new workflow in the Test Env. but there is no way, I always get that error.
I've tried to Register again the workflow, and the result looks ok, but it doesn't solve the problem:
Register-SPWorkflowService
–SPSite "http://whatever/PWA"
–WorkflowHostUri "http://TestServer:12291"
–AllowOAuthHttp -Force
Do you know how to solve this issue or have an idea to give me some light?
Thank you for your help and regards,
José Espases

Looks like you haven't defined the WF scope or the site where you are trying to deploy the workflow to isn't included in the scope
Check this article
http://fangdahai.blogspot.in/2013/04/on-premise-windows-workflow-server.html
Thanks | epmXperts | http://epmxperts.wordpress.com

Data not going from active data table to new data table -DSO activation iss

Hi Experts,
Data is going from DSO1 to DSO2. I see some of the records are getting missed in DSO 2 which are supposed to come.
There is start routine from DSO1 TO DSO2 and as per the start routine some records should come but they are getting missed.
Apart from that..to DSO 2 there are 4 other DSO sending data.
I tried to send single record and saw that data is going

Hi Experts,
Data is going from DSO1 to DSO2. I see some of the records are getting missed in DSO 2 which are supposed to come.
There is start routine from DSO1 TO DSO2 and as per the start routine some records should come but they are getting missed.
Apart from that..to DSO 2 there are 4 other DSO sending data.
I tried to send single record and saw that data is going to New data table and upon activation it does not go to Active data table.
Please suggest.
Regards
Sudha

Data source not shown in active state after replicating from source system

Hi Gurus,
I have activated the datasou 0CO_PC_ACT_05 in R/3 system form RSA5 and replicated the same in BW system. After replication when i try to activate the datasource by instaling the business content.It is not getting installed.
The datasource is already present in the BW system in the modified version, do we need to install the business content to bring the datasource to active state.
Please help.

if its in 3.x then first you need to install business content info source(0CO_PC_ACT_05)
later you can assign your ecc data source to info source and source system. in this process transfer rules and communication structures will comes into picture.
you can use program to activate data source - RS_TRANSTRU_ACTIVATE_ALL
You want use in 3.x version only?
if you have 7.x version bw, better to go with 7.x data flow.

Most of the triggers in my composition are not showing there active state

I have a composition with 18 triggers.
Each trigger has a b/w image that should turn to a colour image when active or rolled over but only the two on the 3rd row work correctly.
The others do change when rolled over but when I roll off, even when still active they go back to their normal state.
Also when the composition plays through only the same two triggers will show the correct active state whilst active.
http://boastassociates08.businesscatalyst.com/projects.html
this happens in all methods of preview.
i have checked and all triggers have the correct images on each state.
Thanks

I figured it out. all trigger also have a link to another page on the site, all but two anyway.
so the triggers states are reacting as if it is just a link rather than it being a trigger in a composition.
does somebody know a way that will allow me to have the triggers states react the way i want and for the triggers to act as a link?

Rollover state not working on active state

Hi, I have a problem with menu states. When a menu item is in its active state the rollover state isn't working. Is this supposed to happen or is there a solution to this?
Thanks.

Hello,
This is working as designed. Active state suppresses changing to any other state on mouse interaction and other states only work on links that are currently in Normal state.
Also refer: https://forums.adobe.com/thread/1136562
Cheers,
Vikas

Data Mart Datasource not available in active state

Hi Experts,
I need to use the generated data source 80PLANTM to create transformation rules for a DSO, but I find that the datasource is available in Modified State (Active Version does not exist). Since this is a Emulated 3.x DS, I am unable to activate it.
Also I don't see a NW04s DS available. We are on NW04s SP 7.
Can someone guide me through this?
Thank you,
Deepthi

Incase you dont have access to OSS Notes...
OSS Note: 925228
Symptom
DataSources (R3TR RSDS) are not activated automatically during their replication if they are not active already.
This seems to differ from the behavior during the replication of 3.x DataSources (R3TR ISFS).
Other terms
ISFS, RSDS
Reason and Prerequisites
When you activate a DataSource (R3TR RSDS), the system generates the Dictionary objects, the transfer structure in the BI system and the source system, and the Persistent Staging Area. This is a fixed part of the object generation that ensures that data can subsequently be loaded to the Persistent Staging Area. A transformation does not have to exist for this purpose.
This type of process was not used for 3.x DataSources: With 3.x objects, data could only be loaded after a 3.x DataSource (R3TR ISFS) had been mapped to a 3.x InfoSource and the relevant transfer rule had been activated. This means that this type of process also required an explicit and manual step to generate the Dictionary objects.
If all replicated DataSources (R3TR RSDS) were activated automatically, the system would generate a large number of mostly superfluous Dictionary objects. In addition, the replication would take several hours, for example, when you connect a new source system with several hundreds of DataSources.
Solution
Before loading data or creating a transformation, manually activate the DataSources (R3TR RSDS) that are really required.
Thanks,
Raj

OIM server not running, stuck in starting state

I have started OIM server through cmd , but its not going to running state, and its stuck to starting only.
Kindly suggest
KK

is there any error?
try once by deleting temp files in oim_server.
_saurabh

Active state not working in scrolling site (with anchor links)

I'm design a scrolling site with anchor links and an horizontal menu on the top.
when i publish the site and click on the menu buttons the site scrolling to the place of the anchor but the active state in the menu is not working.
now... when i leave the main page (were the scrolling site is) and then return back to it all active states are working perfectly
anyone have this bug? or any one know how to fix it ?

Hmmm...I've just been playing around, and I think I got the Active State to work correctly. I think my problem was not understand what Active State means.
To answer your question, I was changing the Font Color and Box Fill Color of the Active State.
I did not understand that Active State means the look of the Menu Item when the PAGE is active. I thought it meant the look of the Menu item when the cursor is scrolling down the Menu (i.e. when the MENU is Active, not the page).
Look at this page for an example of what I'm trying to achieve...
http://www.pgavdestinations.com
When you hover over the "Work" menu item, and move the cursor down the menu, the state of "Work" remains changed until you move the cursor off of that menu column. It does NOT return back to it's Normal state until you are off of that menu column.
Is there a way to achieve this with the menu states in Muse?
Thanks for the replies!
Dave.

Jobs are not in active state

Jobs are in Ready stage but it is not going to active what might me the problem. could any one can reply to my question.

Mani,
It looks like it is just created and in ready status without job start parameters, you can just hit the release icon (Green flag) in SM37 to run your job.
Regards,
Prasobh

Active State not working in Horizontal Menu Bar

I have a Horizontal Menu Bar.
I've set the Top Level Item with Normal, Rollover, Mouse Down and Active States to be different.
All three work on the Top Level Item, EXCEPT for Active State. When the menu is Active, and I move the mouse down the items, the Top Level Item defualts to the Normal State, NOT the Active State.
I've tried trashing the Active State and rebuilding it. That did not work.
I can't figure out how to get the Top Level Item in the Menu Bar to display the Active State.
Hope someone has some suggestions, or knows if this is a bug.
Thanks.
Dave Coop.

Hmmm...I've just been playing around, and I think I got the Active State to work correctly. I think my problem was not understand what Active State means.
To answer your question, I was changing the Font Color and Box Fill Color of the Active State.
I did not understand that Active State means the look of the Menu Item when the PAGE is active. I thought it meant the look of the Menu item when the cursor is scrolling down the Menu (i.e. when the MENU is Active, not the page).
Look at this page for an example of what I'm trying to achieve...
http://www.pgavdestinations.com
When you hover over the "Work" menu item, and move the cursor down the menu, the state of "Work" remains changed until you move the cursor off of that menu column. It does NOT return back to it's Normal state until you are off of that menu column.
Is there a way to achieve this with the menu states in Muse?
Thanks for the replies!
Dave.

Active States Not Working on Anchor Links?

Since updating to the newest version of Muse today, it seems that my parallax site's navigation button aren't displaying the "active" state once you scroll to an anchored position. This was working earlier today, it seems to be an issue with the newest version of Muse (v7.2, Build 230). Anyone else having this issue?
Here's a link to the site. http://www.hillcreative.net

I think this bug is back. I am using the latest Muse build.
When I go to add a menu (manual) from the widget menu, I can add in the names of the buttons without issue.
If I want to link out to other sites, no issue.
However, if I add anchor links, things fall apart.
It seems the first few links work without issue and with a fixed menu at the top, the page scrolls nicely to the area. However, I am noticing that the 4th and 5th button in a manual menu do not respond to active states and even the scrolling page navigation is wonky. The "team" and "contact" buttons never highlight, even when selected, nor do they navigate properly to the corresponidng anchor link.
I have moved the anchor links deeper down the page to see if this makes a difference and it doesn't. It is as if the menu can't pick up the anchor points.
I addition, when viewed on iOS devices (although not optimized) I get 2 active states selected in the menu.
I think the script for this widget needs revisiting. Please advise.
Here is a link to my temporary example:
http://jbrubaker.fatcow.com/warwick/index.html
The active state only shows up for the first 3 buttons...weird.
(Windows 7 / All latest browers)
Thanks!
J.

On resuming instance of suspended message moving to active state?

In my current scenario I am inserting data to Teradata table. As per the requirement if due to some issue if transaction fails I have to notify admin using email and suspend message for resuming.
I am receiving a message
Making a connection to Teradata to check if db is up or not. If it downs I am shooting mail from exception block.
Then I am opening new scope and inserting data into Teradata.
In order to test scenario at the beginning I am updating wrong connection string in SSO. So that it fails in first scope and I will get mail. This part is working file.
After that I am again updating my SSO with correct connection string and restarting the host instance. But when I am resuming my orchestration instance, it is going into Active state.
Also there is no other instance running on the server, so there is no issue in opening new connection with db.
Can any one suggest me what could be the issue.

Atomic transaction is failing due to db timeout issue. When I am resuming orchestration it is going into active state. So I have two scope the one is for checking if Teradata is available or not by opening and closing connection and notifying
in case of exception. That part is working fine. After completion of scope as we don't have inbuilt Teradata I am trying to open connection under atomic transactional to insert data into db in second scope.
But suspended message is going into active state.

OPC server error with Lookout 5.1 that was working with Lookout 4.5

I was running a file on Lookout 4.5 with Field Point explorer 3.0 with field point objects. I recently upgraded the Lookout to 5.1 and Field Point Explorer was uninstalled. Now when I try to open my old Lookout file, I cannot control through the field point objects and I am getting the following error: OPC/OLE error. OPC server not registered properly (63). Invalid class string 800401F3.

Hello,
Thanks for contacting National Instruments. There are three known reasons that you may get this error.
1. IAK file not setup or it has been moved or is missing.
This error is easy to reproduce. In order for the OPC FieldPoint Server to work, it has to launch the FieldPointOPC2.exe which has looks at a registry key for FieldPoint Explorer. In this registry key is the path to the last saved or loaded IAK file. If this file has moved or has been deleted, then you will get this error. This also happens to customers that have upgraded their FP Explorer and haven't opened up their IAK file and saved it.
2. OPCproxy is not registered. Which means the opcproxy.dll or opccomn_ps.dll are not registered or are version 1.0 (can be registered by running "regsvr32 opcprox
y.dll" and "regsvr32 opccomn_ps.dll". The opcproxy.dll and the opccomn_ps.dll are located in the system32 folder in the WINNT directory.
3.OPCserver is not registered (can be accomplished by running the .exe with a /regserver switch) . The Fieldpoint OPC server is located in the following path: [drive letter]:\Program Files\National Instruments\FieldPoint. From a DOS prompt you can manually register the EXE by going to that directory and typing FieldPointOPC2.exe /RegServer. In a dos prompt the command line looks like this (also see attached picture):
c:\cd c:\Program Files\National Instruments\FieldPoint
c:\Program Files\National Instruments\FieldPoint\FieldPointOPC2.exe /RegServer
Hope this works. If it doesn't, then I suggest that you uninstall all NI software and try to do a fresh install. This will properly ensure that all the services and servers are registered.
A Saha
Applications Engineer
National Instruments
Anu Saha
Academic Product Marketing Engineer
National Instruments

STUCK Threads.... Web Logic goes to overloaded state

Hi,
We are facing production problem with struck threads and WL server is going to overloaded state very frequently. When this happens, we have to restart the server to void this issue. Since we dont know when this problem occurs, our support team has to keep monitor the server all the time.
The environment details are:
JRocket:     jrockit160_R28_0_1
WL:      WebLogic 10.3.0.0
OS:     Red Hat Enterprise Linux AS release 4 (Nahant Update 8)
We are extensively thread using the thread pool in application. These threads are being used to write the logs into DB, file system, monitor the timeout of external connections, etc. The issue has been seen various places like log4j, httpClient, etc. Here am sending the thread dump of an issue.
If you could help what is the an issue, it would be great help.
Thanks for your help in advance
Thanks
Sree Hari
Log 1:
"[STUCK] ExecuteThread: '10' for queue: 'weblogic.kernel.Default (self-tuning)'" RUNNABLE native
     jrockit.net.SocketNativeIO.readBytesPinned(Native Method)
     jrockit.net.SocketNativeIO.socketRead(SocketNativeIO.java:32)
     java.net.SocketInputStream.socketRead0(SocketInputStream.java)
     java.net.SocketInputStream.read(SocketInputStream.java:129)
     com.sun.net.ssl.internal.ssl.InputRecord.readFully(InputRecord.java:293)
     com.sun.net.ssl.internal.ssl.InputRecord.read(InputRecord.java:331)
     com.sun.net.ssl.internal.ssl.SSLSocketImpl.readRecord(SSLSocketImpl.java:789)
     com.sun.net.ssl.internal.ssl.SSLSocketImpl.readDataRecord(SSLSocketImpl.java:746)
     com.sun.net.ssl.internal.ssl.AppInputStream.read(AppInputStream.java:75)
     java.io.BufferedInputStream.fill(BufferedInputStream.java:218)
     java.io.BufferedInputStream.read(BufferedInputStream.java:237)
     org.apache.commons.httpclient.HttpParser.readRawLine(HttpParser.java:78)
     org.apache.commons.httpclient.HttpParser.readLine(HttpParser.java:106)
     org.apache.commons.httpclient.HttpConnection.readLine(HttpConnection.java:1116)
     org.apache.commons.httpclient.HttpMethodBase.readStatusLine(HttpMethodBase.java:1973)
     org.apache.commons.httpclient.HttpMethodBase.readResponse(HttpMethodBase.java:1735)
     org.apache.commons.httpclient.HttpMethodBase.execute(HttpMethodBase.java:1098)
     org.apache.commons.httpclient.HttpMethodDirector.executeWithRetry(HttpMethodDirector.java:398)
     org.apache.commons.httpclient.HttpMethodDirector.executeMethod(HttpMethodDirector.java:171)
     org.apache.commons.httpclient.HttpClient.executeMethod(HttpClient.java:397)
     org.apache.commons.httpclient.HttpClient.executeMethod(HttpClient.java:323)
     com.bestbuy.bbym.beast.cap.core.http.HttpSender.sendRequestAndFetchResponse(HttpSender.java:67)
     com.bestbuy.bbym.beast.cap.core.http.HttpAdapter.processRequest(HttpAdapter.java:164)
     com.bestbuy.bbym.beast.cap.core.ProxyHelper.getResponse(ProxyHelper.java:324)
     com.bestbuy.bbym.beast.cap.core.multirequest.PostRequest.execute(PostRequest.java:237)
     com.bestbuy.bbym.beast.cap.util.MultiRequestUtil.executeNextCommand(MultiRequestUtil.java:185)
     com.bestbuy.bbym.beast.cap.core.multirequest.MultiRequestProxy.invoke(MultiRequestProxy.java:87)
     com.bestbuy.bbym.beast.cap.core.RequestProcessor.process(RequestProcessor.java:68)
     com.bestbuy.bbym.beast.cap.core.controller.Controller.handleRequest(Controller.java:737)
     com.bestbuy.bbym.beast.cap.core.controller.SyncServiceHandlingController.handleSyncRequest(SyncServiceHandlingController.java:28)
     com.bestbuy.bbym.beast.cap.core.router.RequestRouter.routeRequest(RequestRouter.java:71)
     com.bestbuy.bbym.beast.cap.core.controller.CAPWsController.processRequest(CAPWsController.java:68)
     sun.reflect.GeneratedMethodAccessor364.invoke(Unknown Source)
     sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     java.lang.reflect.Method.invoke(Method.java:597)
     org.apache.axis.providers.java.RPCProvider.invokeMethod(RPCProvider.java:397)
     org.apache.axis.providers.java.RPCProvider.processMessage(RPCProvider.java:186)
     org.apache.axis.providers.java.JavaProvider.invoke(JavaProvider.java:323)
     org.apache.axis.strategies.InvocationStrategy.visit(InvocationStrategy.java:32)
     org.apache.axis.SimpleChain.doVisiting(SimpleChain.java:118)
     org.apache.axis.SimpleChain.invoke(SimpleChain.java:83)
     org.apache.axis.handlers.soap.SOAPService.invoke(SOAPService.java:454)
     org.apache.axis.server.AxisServer.invoke(AxisServer.java:281)
     org.apache.axis.transport.http.AxisServlet.doPost(AxisServlet.java:699)
     javax.servlet.http.HttpServlet.service(HttpServlet.java:727)
     org.apache.axis.transport.http.AxisServletBase.service(AxisServletBase.java:327)
     javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
     weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
     weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
     weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:292)
     weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:175)
     weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3495)
     weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
     weblogic.security.service.SecurityManager.runAs(Unknown Source)
     weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2180)
     weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2086)
     weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1406)
     weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
     weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
Log 2:
"[STUCK] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'" id=15 idx=0x54 tid=20089 prio=1 alive, blocked, native_blocked, daemon
-- Blocked trying to get lock: org/apache/log4j/Logger@0xc501e0a8[fat lock]
at jrockit/vm/Threads.waitForUnblockSignal()V(Native Method)
at jrockit/vm/Locks.fatLockBlockOrSpin(Locks.java:1402)[optimized]
at jrockit/vm/Locks.lockFat(Locks.java:1503)[optimized]
at jrockit/vm/Locks.monitorEnterSecondStageHard(Locks.java:1045)[optimized]
at jrockit/vm/Locks.monitorEnterSecondStage(Locks.java:996)[optimized]
at org/apache/log4j/Category.callAppenders(Category.java:204)[optimized]
at org/apache/log4j/Category.forcedLog(Category.java:391)[inlined]
at org/apache/log4j/Category.info(Category.java:666)[optimized]
at com/bestbuy/bbym/beast/cap/util/logging/LoggingHelper.logDBInfo(LoggingHelper.java:228)[inlined]
at com/bestbuy/bbym/beast/cap/core/controller/Controller.handleRequest(Controller.java:838)[optimized]
at com/bestbuy/bbym/beast/cap/core/controller/SyncServiceHandlingController.handleSyncRequest(SyncServiceHandlingController.java:28)[inlined]
at com/bestbuy/bbym/beast/cap/core/router/RequestRouter.routeRequest(RequestRouter.java:71)[optimized]
at com/bestbuy/bbym/beast/cap/core/controller/CAPWsController.processRequest(CAPWsController.java:68)
at sun/reflect/GeneratedMethodAccessor120.invoke(Ljava/lang/Object;[Ljava/lang/Object;)Ljava/lang/Object;(Unknown Source)
    at sun/reflect/DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)[optimized]
at java/lang/reflect/Method.invoke(Method.java:597)[optimized]
at org/apache/axis/providers/java/RPCProvider.invokeMethod(RPCProvider.java:397)
at org/apache/axis/providers/java/RPCProvider.processMessage(RPCProvider.java:186)
at org/apache/axis/providers/java/JavaProvider.invoke(JavaProvider.java:323)
at org/apache/axis/strategies/InvocationStrategy.visit(InvocationStrategy.java:32)
at org/apache/axis/SimpleChain.doVisiting(SimpleChain.java:118)
at org/apache/axis/SimpleChain.invoke(SimpleChain.java:83)
at org/apache/axis/handlers/soap/SOAPService.invoke(SOAPService.java:454)
at org/apache/axis/server/AxisServer.invoke(AxisServer.java:281)[optimized]
at org/apache/axis/transport/http/AxisServlet.doPost(AxisServlet.java:699)[optimized]
at javax/servlet/http/HttpServlet.service(HttpServlet.java:727)[optimized]
at org/apache/axis/transport/http/AxisServletBase.service(AxisServletBase.java:327)
at javax/servlet/http/HttpServlet.service(HttpServlet.java:820)
at weblogic/servlet/internal/StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
at weblogic/servlet/internal/StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)[inlined]
at weblogic/servlet/internal/ServletStubImpl.execute(ServletStubImpl.java:292)[optimized]
at weblogic/servlet/internal/ServletStubImpl.execute(ServletStubImpl.java:175)[inlined]
at weblogic/servlet/internal/WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3495)[optimized]
at weblogic/security/acl/internal/AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)[inlined]
at weblogic/security/service/SecurityManager.runAs(Lweblogic/security/acl/internal/AuthenticatedSubject;Lweblogic/security/acl/internal/AuthenticatedSubject;Ljava/security/PrivilegedAction;)Ljava/lang/Object;(Unknown Source)[inlined]
at weblogic/servlet/internal/WebAppServletContext.securedExecute(WebAppServletContext.java:2180)[optimized]
at weblogic/servlet/internal/WebAppServletContext.execute(WebAppServletContext.java:2086)
at weblogic/servlet/internal/ServletRequestImpl.run(ServletRequestImpl.java:1406)
at weblogic/work/ExecuteThread.execute(ExecuteThread.java:201)[optimized]
at weblogic/work/ExecuteThread.run(ExecuteThread.java:173)
at jrockit/vm/RNI.c2java(JJJJJ)V(Native Method)
-- end of trace
"weblogic.time.TimeEventGenerator" id=16 idx=0x58 tid=20090 prio=9 alive, waiting, native_blocked, daemon
-- Waiting for notification on: weblogic/time/common/internal/TimeTable@0xa5889270[fat lock]
at jrockit/vm/Threads.waitForNotifySignal(JLjava/lang/Object;)Z(Native Method)
at java/lang/Object.wait(J)V(Native Method)
at weblogic/time/common/internal/TimeTable.snooze(TimeTable.java:286)
^-- Lock released while waiting: weblogic/time/common/internal/TimeTable@0xa5889270[fat lock]
at weblogic/time/common/internal/TimeEventGenerator.run(TimeEventGenerator.java:117)
at java/lang/Thread.run(Thread.java:619)
at jrockit/vm/RNI.c2java(JJJJJ)V(Native Method)
-- end of trace
"weblogic.timers.TimerThread" id=17 idx=0x5c tid=20091 prio=9 alive, waiting, native_blocked, daemon
-- Waiting for notification on: weblogic/timers/internal/TimerThread@0xa5887ae0[fat lock]
at jrockit/vm/Threads.waitForNotifySignal(JLjava/lang/Object;)Z(Native Method)
at java/lang/Object.wait(J)V(Native Method)
at weblogic/timers/internal/TimerThread$Thread.run(TimerThread.java:267)
^-- Lock released while waiting: weblogic/timers/internal/TimerThread@0xa5887ae0[fat lock]
at jrockit/vm/RNI.c2java(JJJJJ)V(Native Method)
-- end of trace
"[STUCK] ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'" id=18 idx=0x60 tid=20092 prio=1 alive, blocked, native_blocked, daemon
-- Blocked trying to get lock: org/apache/log4j/Logger@0xc501e0a8[fat lock]
at jrockit/vm/Threads.waitForUnblockSignal()V(Native Method)
at jrockit/vm/Locks.fatLockBlockOrSpin(Locks.java:1402)[optimized]
at jrockit/vm/Locks.lockFat(Locks.java:1503)[optimized]
at jrockit/vm/Locks.monitorEnterSecondStageHard(Locks.java:1045)[optimized]
at jrockit/vm/Locks.monitorEnterSecondStage(Locks.java:996)[optimized]
at org/apache/log4j/Category.callAppenders(Category.java:204)[optimized]
at org/apache/log4j/Category.forcedLog(Category.java:391)[inlined]
at org/apache/log4j/Category.info(Category.java:666)[optimized]
at com/bestbuy/bbym/beast/cap/util/logging/LoggingHelper.logDBInfo(LoggingHelper.java:228)[inlined]
at com/bestbuy/bbym/beast/cap/core/controller/Controller.handleRequest(Controller.java:838)[optimized]
at com/bestbuy/bbym/beast/cap/core/controller/SyncServiceHandlingController.handleSyncRequest(SyncServiceHandlingController.java:28)[inlined]
at com/bestbuy/bbym/beast/cap/core/router/RequestRouter.routeRequest(RequestRouter.java:71)[optimized]
at com/bestbuy/bbym/beast/cap/core/controller/CAPWsController.processRequest(CAPWsController.java:68)
at sun/reflect/GeneratedMethodAccessor120.invoke(Ljava/lang/Object;[Ljava/lang/Object;)Ljava/lang/Object;(Unknown Source)
    at sun/reflect/DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)[optimized]
at java/lang/reflect/Method.invoke(Method.java:597)[optimized]
at org/apache/axis/providers/java/RPCProvider.invokeMethod(RPCProvider.java:397)
at org/apache/axis/providers/java/RPCProvider.processMessage(RPCProvider.java:186)
at org/apache/axis/providers/java/JavaProvider.invoke(JavaProvider.java:323)
at org/apache/axis/strategies/InvocationStrategy.visit(InvocationStrategy.java:32)
at org/apache/axis/SimpleChain.doVisiting(SimpleChain.java:118)
at org/apache/axis/SimpleChain.invoke(SimpleChain.java:83)
at org/apache/axis/handlers/soap/SOAPService.invoke(SOAPService.java:454)
at org/apache/axis/server/AxisServer.invoke(AxisServer.java:281)[optimized]
at org/apache/axis/transport/http/AxisServlet.doPost(AxisServlet.java:699)[optimized]
at javax/servlet/http/HttpServlet.service(HttpServlet.java:727)[optimized]
at org/apache/axis/transport/http/AxisServletBase.service(AxisServletBase.java:327)
at javax/servlet/http/HttpServlet.service(HttpServlet.java:820)
at weblogic/servlet/internal/StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
at weblogic/servlet/internal/StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)[inlined]
at weblogic/servlet/internal/ServletStubImpl.execute(ServletStubImpl.java:292)[optimized]
at weblogic/servlet/internal/ServletStubImpl.execute(ServletStubImpl.java:175)[inlined]
at weblogic/servlet/internal/WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3495)[optimized]
at weblogic/security/acl/internal/AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)[inlined]
at weblogic/security/service/SecurityManager.runAs(Lweblogic/security/acl/internal/AuthenticatedSubject;Lweblogic/security/acl/internal/AuthenticatedSubject;Ljava/security/PrivilegedAction;)Ljava/lang/Object;(Unknown Source)[inlined]
at weblogic/servlet/internal/WebAppServletContext.securedExecute(WebAppServletContext.java:2180)[optimized]
at weblogic/servlet/internal/WebAppServletContext.execute(WebAppServletContext.java:2086)
at weblogic/servlet/internal/ServletRequestImpl.run(ServletRequestImpl.java:1406)
at weblogic/work/ExecuteThread.execute(ExecuteThread.java:201)[optimized]
at weblogic/work/ExecuteThread.run(ExecuteThread.java:173)
at jrockit/vm/RNI.c2java(JJJJJ)V(Native Method)
-- end of trace

This is your own logging environment?
Well this is what you get when everything is synchronized.
You have to debug the logging in your environment, for example, by using JRockit Mission Control in particular a flight recording
Example of using the flight recording tool can be found here: middlewaremagic.com/weblogic/?p=6930 (Good luck!)

OPC Server Not going to active state

Similar Messages

Maybe you are looking for