Open 2 Photos at the same time to transfer faces?

I want to put a new face from one picture to another, but I don't know how to open 2 photos at the same time so I can select one face to layer onto the other photo.

Just command-o or file > open and then command-click both images in the open dialogue box. Or just open them one at a time. With the move tool selected (v to select the move tool), you can drag the one image from the image window into the tab of the other image. The second image tab will activate, then release the mouse button and you should have the first image as a layer in the second.

Similar Messages

Can you opening multiple albums at the same time in Photo (not iPhoto)?

When converting the iPhoto library to Photo most of the albums that were in place in iPhoto converted to albums in Photo . . . .but not all. Some were retained as events mainly those that were folders within an album. In order to move them to the right album I would like to have multiple albums open at the same time (side by side) so that I can make sure not to duplicate photos or move them to the wrong spot.
I cant see how to do this, it seems that I can need to open one album and check phots and then close to look within and other and rely on memory. There must be a more efficient and accurate way to do this?

All of the events in iPhoto were converted to albums and are located in the Folder titled iPhoto Event in the sidebar of Photos.
You can't open multiple albums at the same time. You can create a smart album that will do essentially the same thing with the following criteria:
Album is "A"
Album is "B".
The smart album will display all of the photos in those two albums.

CRVS2010 - open multiple rpts at the same time, like sheets in a xls file ?

Hi all,
is that possible to open multiple reports at the same time, like sheets in a excell file ?
Is that possible create tabs beside the MainReport tab ? or include reports in the Group Tree ? how can I do it ?
The application is in asp.net with VS2010 and CR2010.
The reports used to be in excell with three sheets and now we are migrating them to crystal reports, how can I create the report with those three sheets ?
thanks !
Subject modified as per the sticky post at the top of this forum; [Crystal Reports for Visual Studio 2010 Beta - read before posting|Crystal Reports for Visual Studio 2010 Beta - read before posting;
Edited by: Ludek Uher on Aug 31, 2010 7:33 AM

I'll make the suggestion to the Program Management group.
You may want to do a post to the [Crystal Reports Design|SAP Crystal Reports; forum and ask them how they's fake that sort of a requirement. E.g.; there may be some way to make this report look the way you want, but it will be best to ask the experts. Don't mention CRVS2010 as they don't support it and most likely you will not get an answer.
Ludek

Can I save and open an attachemnt at the same time?

I want to be able to open an email with an attachement or attachments and click on the save button for the attachment(s), designate the location (folder) where they are to be saved - but also tell Mail to save the attachments then open them up on the desktop. Two operations in one. If you understand my request you understand what you have to do now - two separate steps. Save. Then find the saved files and open them.
OR
Open the attachment from the email which then downloads the file to your designated "all-purpose" location (not the ultimate location you'd want to save it). Then once you've seen it, you do the save thing with the original mail attachment and then have to go back and delete the file from the designated all-purpose download location.
This latter problem of having to delete unedited downloads manually could be solved with an option in Mail preferences to automatically delete unedited downloads in the "all-purpose" location after that same attachment had been downloaded to another specific location on your hard drive. This option for deleting unedited downloads does not exist, however.
But even if this step-saver option existed in the preferences, you still would not be able to tell your Mac to save a particular Mail email attachment to a particular folder AND open that attachment at the same time in one command.
That's what I want.
Maybe I want both. Save and open together plus the ability to automatically delete unedited attachment downloads in the "all-purpose" download file after the same attachment has been downloaded to another specific location on your hard drive.

with IOS 6 yes you will be able to do that

In Elements 7.0, how can I delete multiple photos at the same time?

In Adobe Photoshop Elements 7.0, how can I delete multiple photos at the same time? Please be a little specific so I can follow your instructions as I'm not real smart at computers; I'm an intermediate user. Thank you.

Shift-click the photos or Ctrl-click them to select them, then right-click one of them and choose Delete from Catalog. They will all go together.

How do I apply same adjustments to multiple photos at the same time?

How do I apply same adjustments to multiple photos at the same time?

You can't but you can copy the adjustments made on one photo and apply/paste it onto another by:
1 - Control (right)-clicking one the edited photo in the Edit mode and selecting Copy Adjustsments
2 - Control-clicking on the next photo and selecting Paste Adjustments.
OT

How to open multiple applications at the same time

I need to open several applications at the same time: Dreamweaver, BBEdit, and Acrobat. Is there a way to smooth this process, so pressing an icon in the dock will open them all for me?

You could create an applescript to do it.
tell application "Dreamweaver's Full Name"
activate
end tell
tell application "BBEdit's Full Name"
activate
end tell
tell application "Acrobat's Full Name"
activate
end tell
Replace the quoted text (leaving the quotes) with the full name of the application, and save the applescript as an application bundle, and put it in your dock.
NOTE: You may have to put the full path to the application for it to work (I.E. /Applications/Dreamweaver.app). If you do, encase the full path in quotes.
Good luck!
Message was edited by: joshz

How can I open two libraries at the same time on itunes?

Hey i need help on opening two libraries at the same time on itunes. I don't know if that is possible but need some advice if its possible. I already have several libaries but I need to compare labaries at times due to various users on my computer. Please help .

Not that I'm aware of. What exactly is that you want to achieve? There are tools for scanning media folders and adding any files not listed in the library, or deleting those that no longer exist. There are also ways to use one library for multiple users so that any tag update gets applied for everyone.
tt2

How do I open several tabs at the same time?

How do I open several tabs at the same time?

Can't you open more than one tab?
Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.com/kb/Safe+Mode
*https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes

Is there any version of Indesign that allows to open multiple instance at the same time

I am using Indesign CS3 to generate the bulk reports automatically(programmatically) using Adobe indesign library . One of the key limitation to this tool is it allows to open only one instance at a time unlike word where multiple instances can be opened at the same time. Is there any adobe indesign too version desktop/server which allows to open multiple instances at the same time. Any help on is appreciated. Thanks.

@PeterG
You said "You might want to examine the End User Licensing Agreement (EULA) for any prohibition against using these two instances at the same time with the same license; the license does permit two installs for the same user that are not used simultaneously." I thought that meant you had read the EULA. It's pretty unambiguous on that point.
For everyone's edification about multiple installations and server use with a standard license here's the relevant text:
2. Software License.
If you obtained the Software and any required serial number(s) from Adobe or one of its authorized
licensees and as long as you comply with the terms of this agreement, Adobe grants you a non-exclusive
license to install and use the Software in a manner consistent with its design and Documentation and as
further set forth below. See Section 16 for specific provisions related to the use of certain products and
components, for example font software, Acrobat, After Effects, Adobe Presenter, Contribute, Adobe
Device Central, Flash Player, Flash Builder, and Adobe Runtimes.
2.1 Limited Use. The Software, or portions of the Software, may allow installation and use without a serial
number. If so, you may install but not use such non-serialized Software on any number of Computers as
part of an organizational deployment plan. Further, you may install and use such non-serialized Software
on any number of Computers for demonstration, evaluation and training purposes only and only if any
Output Files or other materials produced through such use are used only for internal, non-commercial and
non-production purposes. You may not use such non-serialized Software after any applicable time-out
period has ended, unless you input a valid serial number under Section 2.2. ACCESS TO AND USE OF
ANY OUTPUT FILES CREATED WITH SUCH NON-SERIALIZED SOFTWARE IS ENTIRELY AT
YOUR OWN RISK.
2.2 General Use. You may install and use one copy of the Software only on the Permitted Number of your
compatible Computers into which you enter a valid serial number.
2.3 Distribution from Server. You may copy an image of the Software onto Computer file server(s) within
your Internal Network for the purpose of downloading and installing the Software onto Computers within
the same Internal Network for use as permitted by Section 2.1 and 2.2.
2.4 Server Use. You may install the Software on Computer file server(s) within your Internal Network only
for use of the Software initiated by an individual from a Computer within the same Internal Network only
as permitted by Section 2.2. The total number of users (not the concurrent number of users) able to use the
Software on such Computer file server(s) may not exceed the Permitted Number.
By way of example, the foregoing does not permit you to install or access (either directly or through
commands, data or instructions) the Software: (a) from or to a Computer not part of your Internal Network,
(b) for enabling Web hosted workgroups or services available to the public, (c) by any individual or entity
to use, download, copy or otherwise benefit from the functionality of the Software unless licensed to do so
by Adobe, (d) as a component of a system, workflow or service accessible by more than the Permitted
Number of users, or (e) for operations not initiated by an individual user (e.g., automated server
processing).
2.5 Portable or Home Computer Use. Subject to the important restrictions set forth in Section 2.6, the
primary user of the Computer on which the Software is installed under Section 2.2 (“Primary User”) may
install a second copy of the Software for his or her exclusive use on either a portable Computer or a
Computer located at his or her home, provided that the Software on the portable or home Computer is not
used at the same time as the Software on the primary Computer.
2.6 Restrictions on Secondary Use by Volume Licensees. If the Software was obtained under an Adobe
volume license program (currently known as Adobe Open Options) by any licensee other than an
educational volume licensee, the second copy of the Software made under Section 2.5 must be used solely
for the benefit and business of that volume licensee. For more information about secondary use by volume
licensees, please visit our Web Site at http://www.adobe.com/go/open_options.
There is also language stating that if you have a dual boot or other system capable of running more than one OS you will need a separate license for each platform if you want to run the software on more than one.

Cannot open two pictures at the same time - computer crashes

I have PSE7 and Windows7. I cannot open two pictures at the same time. When I go to open the second picture it crashes PSE7. Anyone know how I can open two pictures at the same time? What is the fix?

Hello Shawbrah
Thanks for your reply.
Yes, your method is actually the only workaround for a workplace with PSE7, but it isn't a solution for our enterprise network/domain.
There are different problems:
We have several computers with PSE7 installed. It does not make sense to manually install a local TCP/IP-printer on each PC.
We have many fluctuation in our company which means that the workplaces will often be moved and the PCs will often be replaced.
If the employees are printing over a local printer, our centralized printer monitor solution does not recognise print volumes.
The printers which are defined on our print server have special tray settings and these settings are "linked" to the core business application. Users should not be able to print with other settings, this could end in a chaos.
Finally to work with PSE in our company, there is no other way than upgrade to PSE8...
-Nicolas

HT2472 I must have done something inadvertently and now if I have more than one application open the one I click on comes up front and center and the other apps disappear. How do I reset to have them both up and open and viewable at the same time?

I must have done something inadvertently and now if I have more than one application open, the one I click on comes up front and center and the other apps disappear. How do I reset to have them both up and open and viewable at the same time?

Hi Jan, Almost sounds like Expose or Spaces....
http://support.apple.com/kb/HT2503

How to open 2 playlist at the same time and have them in two diferents windows?

until iTunes 10 i can open more than one playlist at the same time, and have this playlist in diferents windos but since 11 i cannot do it anymore.. is anoying if i need to fast switc music froms playlists.. so it become usseless...
i think the aim of the previous itunes (before 10) it was to give a service of arranging librerys of musics.. but now, it becomes a sell party program...
and only to you to know, if i dont put my credit card on my account i cannot even buy FREE programs on appstore...
thats bad... very bad..
if you need some tips how to do it proprerly here you got one..
if is not broken... dont fix it...
now i have my iphone 6, my ipad and the iphone of my wife, but i have itunes 10 because is the one who have the multi windows possibilities.. and now i cannot sync the devices..
thats very bad..
i hope you can help me...
if you dont understand my problem i can show you via video..
thanks

You could create an applescript to do it.
tell application "Dreamweaver's Full Name"
activate
end tell
tell application "BBEdit's Full Name"
activate
end tell
tell application "Acrobat's Full Name"
activate
end tell
Replace the quoted text (leaving the quotes) with the full name of the application, and save the applescript as an application bundle, and put it in your dock.
NOTE: You may have to put the full path to the application for it to work (I.E. /Applications/Dreamweaver.app). If you do, encase the full path in quotes.
Good luck!
Message was edited by: joshz

Cant open multiple profiles at the same time on Outlook.

So i have done some research and found that you can use command line switches to open different profiles in Outlook.
e.g. "C:\Program Files\Microsoft Office\Office15\OUTLOOK.EXE" /profiles "ProfileName"
What i want to do is open two different profiles at the same time. So i already have one profile open, i use the method above, however it simply opens a copy of the profile i already have open rather than the one i defined in the command line switch?
I know it works because if i don't have a profile open it opens the profile i specify. Is this by design? If so what is the point in having a profile switch? If someone could help me get this working it would be great.
Thanks in advance.

Hi Eric,
Thanks for confirming this. We already have all the mailboxes that she wants on her main profile. The problem is that Outlook cant handle processing all of these at the same time and continuously crashes and hangs. As i said previously the .ost for her profile
was 16GB, i have managed to reduce to 9GB but Microsoft themselves say that anything above 5GB needs extra hardware power for a good user experience.
http://support.microsoft.com/kb/2695805/en-gb
Up to 5 gigabytes (GB): This file size should provide a good user experience on most hardware.
Between 5 and 10 GB: This file size is typically hardware dependent. Therefore, if you have a fast hard disk and lots of RAM, your experience will be better. However, slower hard disk drives,
such as drives that are typically found on portable computers or early-generation solid-state drives (SSDs), experience some application pauses when the drives respond.
More than 10 GB: When the .ost file reaches this size, short pauses begin to occur on most hardware.
Very large (25 GB or larger): An .ost file of this size increases the frequency of short pauses, especially while you are downloading new email messages. However, you can use Send/Receive
groups to manually sync your mail. For more information about Send/Receive groups, see the "Are you synchronizing many RSS feeds?" section.
I find it surprising that you cant have multiple profiles with different mailboxes when you consider you can only have an .ost up 5GB to have a good user experience. Maybe this is something the developers can put into the next version of Outlook? Or release
as a patch?

Open two movies at the same time

It seems that it is not possible to open two movies (.cp) at
the same time with Captivate 1 (well you can run a new Captivate
program an open the second movie) but will it be possible to open
more than one movie at the same time in Captivate 2?
Thanks

Hello hydrosound,
Whilst you cannot open two Captivate movies in the same
instance of Macromedia Captivate, you can get around this by simply
loading another copy of Captivate. I do this all the time and open
the second project file that way.
HTH
Regards,
Mark

Open 2 Photos at the same time to transfer faces?

Similar Messages

Maybe you are looking for