"open a new tab" buttton on the toolbar does not insert new tab after current

I want the open a new tab button at the right end of the tab bar to open a new tab after the currently open tab the same way the browser does when the browser.tabs.insertRelatedAfterCurrent profile option is set to true.
This current behavior is VERY annoying as I always have many tabs open and then have to scroll all the way to the right of the tab bar and drag the new tab back to where I want it, which is always following the currently active tab.
Not sure if this was ever supported but if not I used to run Tabberwoky which no longer works and I've become quite fond of the feature and I need to make Firefox 8 do this.
Please tell me how, not that I can't or should do it some other way.
Thanks.

That did it! Sure saves me trying to figure out how to write an extension to do it but if there is a simple example similar to my request that the source code is available for so I can take a look at it to see how its done the link to it would be appreciated.
Thanks for the help!

Similar Messages

  • I am unable to work on docs in adobe as the toolbar does not appear when I tap on the doc.

    how do I get my adobe to work? I open the doc in adobe but cant work on the doc. the toolbar does not appear when I tap in the middle. All contact us help leads to nowhere. the e mails from support cant be replied to. is there another app that one couls use to download doc and actually be able to work on them?

    What is your operating system?
    What is your Reader version?
    Are these local or online documents?  If online, in what browser?

  • Bought a new Ipod touch and the WiFi does not connect.  Tried Reset and total Restore, does not connect to Router on DHCP, tried Static manually and still can not get it to connect even though it registers as connected.

    Bought a new Ipod touch and the WiFi does not connect.  Tried Reset and total Restore, does not connect to Router on DHCP, tried Static IP, Subnet, Router and DNS manually and still can not get it to connect even though it registers as connected.  Using Airport for router, latest firmware, no problems with Iphone 4 or Macbook Pro or any other internet devices.  After total Restore (factory settings) tried again, showed connected to router, but does not display "check" next to router but little rotating icon even though the wifi range signal shows connected at full strength and it says it is connected.  Just can't seem to get it to generate an IP.  Any solutions other than turning it on and off again?  Not a Merry Christmas morning.

    Ok, so, a couple of things:  Denisefromwaleska and I have the exact same size/type/color iPod.  Now wishing I'd bought the black one maybe...
    Second, Airport is an Express and I have a second one that I carry with me when I travel.  Tried to connect my Airport Express to the internet and could not although the iPod did recognize the router and tried to connect to the internet for some time, unlike my previous problem.  Updated firmware on my travel router, still could not connect to the internet.  Going to try to set up a manual Static IP on the travel router here in a few and conect through it although I predict the problem will persist. Back on the Christmas Present Airport Express router, it is back in play and working fine for all devices save the iPod. 
    Thanks again for all your help, hopefully I can get a solution in place soon,

  • When I click to open Mozilla icon on my desktop, the page does not open & I cannot access it unless I type it in an Internet Explorer page?

    When I click to open Mozilla icon on my desktop, the page does not open & I cannot access it unless I type it in an Internet Explorer page? When clicking on the Icon sometimes it will flash to the right of my desktop screen but does not open for access.

    Hi Dave, thanks for your answer.
    I have tried a several times to repairing permissions, restarting the mac, relaunched Finder, but no difference.
    I copied the download folder to the dock...there I can open the files, but not deleting them or copying them.
    When I open finder, then I click on the folder Download, after a while of thinking, it throws me out and back to the desktop.
    already tried to sign in with the guest user account, then I am able to open the download folder.(but not seeing my files)
    When I am trying to change the download folder in Safari, it also throws me out and gives me a error report ,for sending to Apple.
    I think it's a settings fault or i think my download folder is locked. Almost desperat, already called support center,
    They couldn't help, for free, due the 90 days free online help i have reached. If I want to solve this problem, they could try it , but it cost me almost 50 euros.
    hope there is someone, who's knowing this problem.
    By the way, I think it also could be that I dragged some downloaded music to the desktop, and dragged some folder that has the settings. Now its changed???
    Or I was downloading something, and deleted the files in the download folder while it was unpacking and reparing the files.
    It's not easy for a beginner Mac user (3 months) to already solve this problems.
    Can you follow me? And seems this problem familiar to you?
    Thanks in advance

  • I bought Adobe Elements 12; I cannot use panorama photomerge, I have followed the directions to go to Full Edit  mode in edit workspace choose File New Photomerge. However the Photomerge does not work, it does not respond.   The only thing I can come u

    I bought Adobe Elements 12; I cannot use panorama photomerge, I have followed the directions to go to Full Edit  mode in edit workspace> choose File> New> Photomerge. However the Photomerge does not work, it does not respond.
    The only thing I can come up with is that I found a blog that said that in the Trial version Photomerge does not work, however I do Not have the Trial version, I did at one time but I purchase Adobe Elements. Thank you.

    The blog was incorrect. Photomerge should work in the trial, too.
    When things get weird in PSE the first thing to do is to delete the prefs. Go to the editor preferences>general, click this button and restart the editor:

  • When I open Power Point files in Keynote the music does not play. How can I solve this?

    When I open Power Point files in Keynote the music does not play. How can I rectify this?

    That issue can be caused by an extension that isn't working properly.
    Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
    *Don't make any changes on the Safe mode start window.
    *https://support.mozilla.com/kb/Safe+Mode

  • I have a problem with the device does not accept 5 slot after work and survey content is not possible activation of the device and iTunes

    I have a problem with the device does not accept 5 slot after work and survey content is not possible activation of the device and iTunes imei: 01******206
    <Personal Information Edited by Host>

    لدي جهاز ترقفت الشبكه ويعطي جاري البحث وتم تحديثه ولم يتم حل المشكلهة  والان الجهاز لايقبل التنشيط والايتونز لايتعرف عليه امل تنشيطه 013619004986206

  • The last tab, furthest to the right, does not load when restarting FireFox.

    Whenever I restart firefox, the last tab I had opened does not load. The matter of restarting can be any kind: new add on installed, new firefox update, restarting the browser manually, or restarting my computer so that firefox is automatically closed. It's always the same problem. The last tab will be displayed as my New Tab page, which is blank. I can have 3 tabs open, and the first 2 will load just fine, but the last doesn't. This means that if I restart for an add-on or something, I need to go back into my history to pull up this last tab, which is inconvenient. And it may not have been my most recent tab. I may open this last tab, go back to an earlier tab and surf the web on that, building my history, and then restart firefox for whatever reason. In those instances, I need to open up the history window and dig for that last tab from memory.

    Alright. It appears to be an addon called Load Tabs Progressively. I'll just leave that disabled.

  • I am trying to set up my new ipod touch and the system does not recognize my apple id.  How do I reset and start again.  I'm not sure what to do now.

    I can be reached at this email during the day [email protected]

    Try to change your Apple ID back to your old email address (http://appleid.apple.com) in order to set up and activate the phone. After the set up please sign out of iCloud and turn off "Find My iPhone" (Settings > iCloud) - do that on all your devices -, then change your Apple ID to your new address again and then add your iCloud account on you devices again.

  • I cannot use the scroll, cannot change tabs, autocomplete for the URLs does not work

    cannot use scroll, cannot change tabs, cannot use autocomplete in the URL tab. this was working
    == This happened ==
    A few times a week

    Do you have that problem when running in the Firefox SafeMode?
    [http://support.mozilla.com/en-US/kb/Safe+Mode]
    ''Don't select anything right now, just use "Continue in SafeMode."''
    If not, see this:
    [http://support.mozilla.com/en-US/kb/troubleshooting+extensions+and+themes]

  • I can't remove "CouponCabin". Unchecking the toolbar does not prevent the notifications in your browser. Can you help me completely remove it? I can't find any entries in the registery..

    I've asked coupon cabin and they say I need to get support from firefox. I find it very odd that I can't find any information with a google search either. I'm hoping the solution is so simple that no one else has had this problem and I just can't figure it out...haha! I've performed a search for "couponcabin" in the whole registry but there are no entries. I can't find any files referring to coupon cabin either.

    http://www.couponcabin.com/benefits/toolbar/ <br />
    Looks like that is a toolbar extension that gets installed into Firefox.
    See this: <br />
    http://kb.mozillazine.org/Uninstalling_toolbars

  • Downloaded apple Itunes on our new computer but now the ipod does not appear in the upper left corner and cannot figure how to download songs to my Ipod. Wehave a gatewayunit with windows 8

    Cannot figure this out

    If you  have iTunes 11 turn on the Sidebar.  Go to iTunes>View and click on Show Sidebar. You can also do a Crtl+S to show the sidebar.

  • The machine does not go to sleep after playing selected songs

    I need a way for iTunes 10 to go to sleep ,after the selected songs have been played. I have not found a shortcut that will do this, Help.

    I think I have the same issue. I have an external display connected to my MacBook Pro. When I want the system to Sleep, I used to close the lid and everything was fine. Now that I have Lion installed, I close my lid and the system stays on and switches to my external display instead.
    This is annoying and hopefully someone figures out a fix soon. I hate having to manually put my system to sleep.

  • When I click safari on my iMac it says my toolbar does not support this. What is the issue?

    My safari won't open. When I click it, the message says the toolbar does not support this. How can I fix safari?

    You installed the Conduit spyware. To remove it, back up all data, then follow these instructions.
    If the instructions don't work, proceed as follows.
    Triple-click the line below on this page to select it:
    ~/Library/Application Support/Conduit
    Copy the selected text to the Clipboard (command-C). From the Finder menu bar, select
    Go ▹ Go to Folder…
    Paste into the box that opens (command-V), then press return. A Finder window should open with a folder named "Conduit" selected. If it does, delete the selected item.
    Repeat with this line:
    /Applications/Toolbars
    Now you're deleting a folder named "Toolbars". You may be prompted for your login password. Next, copy this line:
    /Library
    Select Go to Folder… again and paste. Don't delete the Library folder. Delete only the following items inside it, if they exist.
    Application Support/Conduit
    InputManagers/CTLoader
    LaunchAgents/com.conduit.loader.agent.plist
    ScriptingAdditions/ct_scripting.osax
    Close the Finder windows you opened. Log out and log back in.
    I've seen a report that Conduit may be bundled with a scam "utility" called "MacKeeper." If you installed MacKeeper, you should remove it according to the developer's instructions. It's worthless and causes many problems reported on this site.

  • Form does not show "new" records from SQL Database

    I have a PDF form that pulls data from a SQL Server.  The fields in
    the PDF are populated from the database after selecting a specific
    record from a drop down and then clicking on a button labeled "Fill".
    The problem is that the dropdown does not display new records that
    have been recently added to the database.  I have to open the form up
    in designer then save it, (*note - I change nothing at this point.)
    Then when the form is opened back up in Adobe the dropdown show all
    the records including the new ones.  I even put a manual refresh on
    form to try and fix this an it did not help. Seriously stumped.
    Any help is greatly appreciated.
    Here is my code for the dropdown.
    ++++++++++++++++++++++++++++
    topmostSubform.Page1.JobSelect::initialize - (JavaScript, client)
    var sDataConnectionName = "BBCC"; // example - var sDataConnectionName
    = "Test";
    var sColHiddenValue = "ContractAdmin_Key"; // example - var
    sColHiddenValue = "Dept_ID";
    var sColDisplayText = "JobDescription"; // example - var
    sColDisplayText = "Dept_ID"
    // Search for sourceSet node which matchs the DataConnection name
    var nIndex = 0;
    while(xfa.sourceSet.nodes.item(nIndex).name != sDataConnectionName)
    nIndex++;
    var oDB = xfa.sourceSet.nodes.item(nIndex);
    oDB.open();
    oDB.first();
    // Search node with the class name "command"
    var nDBIndex = 0;
    while(oDB.nodes.item(nDBIndex).className != "command")
    nDBIndex++;
    // Backup the original settings before assigning BOF and EOF to stay
    var sBOFBackup =
    oDB.nodes.item(nDBIndex).query.recordSet.getAttribute("bofAction");
    var sEOFBackup =
    oDB.nodes.item(nDBIndex).query.recordSet.getAttribute("eofAction");
    oDB.nodes.item(nDBIndex).query.recordSet.setAttribute("stayBOF",
    "bofAction");
    oDB.nodes.item(nDBIndex).query.recordSet.setAttribute("stayEOF",
    "eofAction");
    // Clear the list
    this.clearItems();
    // Search for the record node with the matching Data Connection name
    nIndex = 0;
    while(xfa.record.nodes.item(nIndex).name != sDataConnectionName)
    nIndex++;
    var oRecord = xfa.record.nodes.item(nIndex);
    // Find the value node
    var oValueNode = null;
    var oTextNode = null;
    for(var nColIndex = 0; nColIndex < oRecord.nodes.length; nColIndex++)
    { if(oRecord.nodes.item(nColIndex).name == sColHiddenValue)
    { oValueNode = oRecord.nodes.item(nColIndex); } else
    if(oRecord.nodes.item(nColIndex).name == sColDisplayText) { oTextNode
    = oRecord.nodes.item(nColIndex); } }
    while(!oDB.isEOF())
      this.addItem(oTextNode.value, oValueNode.value);
       oDB.next();
    // Restore the original settings
    oDB.nodes.item(nDBIndex).query.recordSet.setAttribute(sBOFBackup,
    "bofAction");
    oDB.nodes.item(nDBIndex).query.recordSet.setAttribute(sEOFBackup,
    "eofAction");
    // Close connection
    oDB.close();
    ++++++++++++++++++++++
    Here is code for the refresh button
    +++++++++++++++++++++
    topmostSubform.Page1.Button27::click - (JavaScript, client)
    sourceSet.BBCC.requery();
    +++++++++++++++++++++

    pguerett wrote:
    The other thing that might be happening is a refresh issue on the DropDownList. Try adding the command xfa.layout.relayout() after the database connection has been closed.
    Paul
    Good catch Paul!  Would you believe that I have been trying to get this resolved for almost two years! Works perfect now.
    Thank you,
      - Eric

Maybe you are looking for