Open a window in the same place EVERY time

I have a TextEdit document in a password protected .dmg.  When I open the document, it opens in the middle of my screen, then I drag it out of the way to the far right side of the screen.  I'd like to be able to open it on the right side of my screen from the get-go each time I open it.  Can this be done?

Anybody care to chime in here? 

Similar Messages

  • Open application windows in the same place consistently

    Hello,
    I am hoping to find out if anyone knows of a good way to convince application windows to open in the same location on the screen every time, consistently. This is, clearly, a minor problem, but perhaps you know how to do it. For example, I tend to use Safari with the window open over the entire screen, but every time I open a new window it locates itself with a couple mm between left side of the screen and left side of the Safari window, and the right side of the Safari window (the scroll bar) is partially off the screen (because the window is shifted). So every time I open a new Safari window I have to click the top bar and drag it a little bit to place it where I want it. Is there a way to "teach" Safari where I want it to open so that it will open in the same place every time? Maybe the problem is that I have a hidden dock on the left side of the screen and Safari does not want to come too close to the dock?
    (I also have the same issue with Mail, because though I use that program with the application window only open over part of the total screen area it always opens in the same place on the screen which is always slightly off from where I want it to be)
    Any suggestions? Thanks!!
    PS I apologize if this has been posted before; I tried several searches but the only results that came up were not at all related to my actual question.

    I don’t think there is a way to teach Safari not to shift the window when a new one is created. And I don’t think it is related to the position of the Dock.
    I leave a few cm of space on the right side of the Safari window and have the screen filled from top to bottom with the Safari window. Then when I make a new window, it opens shifted a little to the right of the previous window, but it doesn’t put the scroll bar off the screen and because the screen is filled from top to bottom, it doesn’t shift down, just right next to the previous window.
    You might try using tabs. When you click a link that you want in a new window, hold the Command key down. It will open in a new tab in the same window and you can change between the window tabs by clicking on it on the top of the window. The X on the tab will close the tab.

  • HT1390 My movie crashes/stops half way through at the same place every time. I would like to watch the whole film... who do I get to sort this out? thanks

    My movie crashes/stops half way through at the same place every time. I would like to watch the whole film... who do I get to sort this out? thanks!

    Click Support at the top of this page, then click the link under Contact Us

  • How to open the numbers window in the same place?

    I like to have the Numbers window open in the same place every time (lower right hand corner of the screen), so that I can have the windows of other programs open too.  As it is, I have to move it there every time.  This isn't a big deal, I realize, but I didn't have to do that with the previous version: it always opened the window to the last place it was located when I closed the program the previous time.
    Any tips would be appreciated!

    Hi Roger,
    Saving window size and placement is something that has been lost in Numbers 3.0. This announcement says that Apple will make 'improvements' within 6 months
    http://support.apple.com/kb/HT6049
    Numbers
    Customize toolbar
    Improvements to zoom and window placement
    Multi-column and range sort
    Auto-complete text in cells
    Page headers and footers
    Improvements to AppleScript support
    Regards,
    Ian.

  • Image map (Open a link in the same place not a new Window)

    Image map (Open a link in the same place not a new Window)
    I'm using image map From KM a made a Image and I put the link like this "documents/images/image.jpg" okay, its works, but when I click on the link open other page, How to open on the same page ???????

    Hi Marcus,
    Try out this link. It may be helpful to you.
    Opening of IView in New Window
    Regards
    gEorgE

  • My iTunes movie rental freezes during the opening credits always at the same place.

    my iTunes movie rental freezes during the opening credits always at the same place.  What is the cure?  Can I recieve credit for the rental since I could not view it in its entirerty?

    Hi Epski
    Let us know how you go as i'm having the same issue also. I upgraded to yosemite and itunes 12 at the same time and thought the OS upgrade was the issue. I downgraded back to Mavericks again (for lots of reasons i won't go in to here) thinking this would fix the problem but it didn't.
    When i play any video content from itunes 12 in full screen goes dark once the controls fade away. QT, appletv or anything else plays them perfectly, as per itunes 11!
    You don't have a Samsung TV by any chance do you?

  • When i click on my external hard drive the screen goes dark and a msg pops up saying i have to shut down my computer by holding the power button and then restart it. when i do that i get the same result every time. it worked perfectly last night..

    when i click on my external hard drive the screen goes dark and a msg pops up saying i have to shut down my computer by holding the power button and then restart it. when i do that i get the same result every time. it worked perfectly last night..

    These instructions must be carried out as an administrator. If you have only one user account, you are the administrator.
    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
    Ifou don't see any reports listed, but you know there was a panic, you may have chosen Diagnostic and Usage Messages from the log list. Choose DIAGNOSTIC AND USAGE INFORMATION instead.
    In the Console window, select
              DIAGNOSTIC AND USAGE INFORMATION ▹ System Diagnostic Reports
    (not Diagnostic and Usage Messages) from the log list on the left. If you don't see that list, select
              View ▹ Show Log List
    from the menu bar.
    There is a disclosure triangle to the left of the list item. If the triangle is pointing to the right, click it so that it points down. You'll see a list of reports. A panic report has a name that begins with "Kernel" and ends in ".panic". Select the most recent one. The contents of the report will appear on the right. Use copy and paste to post the entire contents—the text, not a screenshot.
    If you don't see any reports listed, but you know there was a panic, you may have chosen Diagnostic and Usage Messages from the log list. Choose DIAGNOSTIC AND USAGE INFORMATION instead.
    In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.)
    Please don’t post other kinds of diagnostic report.
    I know the report is long, maybe several hundred lines. Please post all of it anyway.

  • Adobe Media Encoder for Premiere Pro CS4 stops working on the same frame every time...

    I currently have Adobe Premiere Pro CS4 and have never had these issues exporting before. My timeline is less than 3 minutes long, but it does deal with multiple big files. It rendered perfectly and it plays perfectly in the timeline. When I try to export it using Media Encoder, however, it freezes at the same frame every time (which is actually only a few seconds in!) and then crashes, so that I have to force quit. I have tried exporting it as many different codecs and the problem persists... same frame. I tried creating a new project entirely and whipping together a few titles and exporting that to see if it just won't export anything at all. The new project exported just fine, however, which I suppose is good news. But yeah, my work on that other project is very important to me and I reallllly want to export it. Please help!

    Hi Jim! Thank you for your reply. I think you are right -- and that it lies in the audio somehow!
    It turns out that if I choose to only export the video, and uncheck audio, it will export very well and smoothly. That's great news for me!
    However, now I am trying to work out how to get the audio exported without issues. I actually had the idea of just playing the audio in the timeline and recording it via Stereo Mix, but my Windows 7 driver has Stereo Mix disabled, so it's back to square one. Any ideas of what I can do about the corrupted audio not exporting, which works fine when played in the timeline?

  • How can I save to the same map every time when printing pdfs?

    How can I save to the same map every time when printing pdfs?
    Finder points to the document map even when I chose a different map recently.
    I often print series of pdfs from the print dialog box, I'd like to choose the map to save to and then have all subsequent pdf prints automatically directed to the same map until I decide otherwise.

    that link seems to be broken right now:
    403 Error - Forbidden  - No cred, dude.

  • I'm trying to update my Photoshop CS5, but continue to receive the same problem every time. The application manager update dialogue box simply states "some updates failed to install." There's no specific error code, but a link to contact support for furth

    I'm trying to update my Photoshop CS5, but continue to receive the same problem every time. The application manager update dialogue box simply states "some updates failed to install." There's no specific error code, but a link to contact support for further assistance. It doesn't take me to customer support, but does take me to a screen which states. "Error "This serial number is not for a qualifying product." I've checked my account and the product serial number is associated with my account., so I don't see any problem.  I have not been able to find a resolution to this problem, so I hope that someone can point me in the right direction.  Thank you!

    update directly, Product updates

  • Web sudoku app prints the same puzzle every time?

    We got an 8500A plus from Costco recently. My mom was able to print her favoriate game for the first time, thanks to the web sudoku app and the touch interface. Unfortunately, it seems to print the same puzzle every time for the same category (easy, medium, hard, evil).
    Any tips to make it print something different each time? Is it only updated daily?

    Dear hpllu, 
    You should try unistalling and reinstalling the sudoku app from the ePrintCenter website.
    If I have solved your issue, please feel free to provide kudos and make sure you mark this thread as solution provided!
    Although I work for HP, my posts and replies are my own opinion and not those of HP

  • Open new window in the same form

    Hi
    I created a form with 6 records displayed. I have a check box for each record. I would like to select a record and make the check box checked. Once I check a checkbox I would like to automatically open a new window in the same form with further details of the checked record. Could you please help me how I could work on this.

    Dear you have to create relation between the blocks then you can achieve this like:
    1) Create two canvases in your form (canvas1 and canvas2).
    2) Create a window in your form with name Window2 now you have two windows (Window1 and Window2).
    3) now set the property 'Primary Canvas' of each window (Window1 = Canvas1, window2 = Canvas2)
    4) Now create database block of you main table with (CAT, NAME, DEPT) fields and select the Canvas1 in the layout wizard.
    5) Create another database block with same table but this time select only 3 fields (CAT,SAL, DATE) and at the time of creation mention relation between blocks in the Data block wizard (block1.cat = block2.cat) and select the Canvas2 in the layout wizard.
    6) Now create check box field name MASTER_CHBOX in first block and set Database Item property no of this check box item and set the Value When Checked property to Y and N for Value When unChecked.
    7) Create a trigger on CheckBox Item and paste below code in it.
    if :MASTER_CHBOX = 'Y' then
    show_window('WINDOW2');
    go_item('SAL');
    end if;
    Regards.
    Omer

  • Open new window in the same Window

    Im developing a project in JavaFX where I wish to open the new window in the same window
    Here is my code :
    Stage st=(Stage)((Node)t.getSource()).getScene().getWindow();
    I tried this but its giving an exception

    It is possible to specifiy a named window instead of _blank.
    So you could use the following instead:
    web.show_document('html/hello.htm','my_window');
    where my_window can be anything you want to call that browser window.
    However, I have discovered that if you put this in a button trigger, the second time you press the button (if the window is still open) it will not take focus - ie. it remains in the background.
    You can get around this by closing the window if it is already open:
    web.show_document('html/close.htm','my_window');
    web.show_document('html/hello.htm','my_window');
    The close.htm needs to contain some javascript to close the window:
    <html>
    <body onload="closeit()">
    <script>
    function closeit()
    window.opener = top;
    window.close();
    </script>
    </body>
    </html>
    Apparently XP SP2 is a little stricter with javascript and may not allow this. Also, not sure if this works in all browsers, I only tried IE6.

  • Can you open multiple windows of the same Keynote presentation?

    Like you can in PPT, where you can go Window > New Window, and see more than one slide at once of the same presentation in the large view. If there is any way to view more than one slide at time, in the large view, please let me know.
    I know about Light Table, and that's useful but I really want to be able to open multiple instances of the same presentation like I could in ppt.

    Thanks, I will. It seems like such an obvious thing, yet I could not find anyone referencing it anywhere. I thought I was the only one who used ppt (or now keynote) that way. Otherwise it is awesome, so much better than PPT.

  • I am asked to select an app each time I attempt to open a linked file via a website. How do I tell firefox to use the same app every time?

    I have a website; www.designed4submariners.com. On several pages, I have created links to images which are located in a upload file folder. Each time I click on one of those links on the active website (using Firefox as browser), a dialog box appears asking me: What should Firefox do with this file? Beneath the question is a pull down menu which has "TextEdit (defualt)" selected next to a radio button. The image file will open in a browser window when I select Firefox from that pull down menu. I can not tell Firefox to open all similar files using Firefox. How can I resolve this issue as I must go through the same process each time I attempt to open one of those links.

    Your response identifies the issue exactly! My website is hosted by GoDaddy. I have forwarded your linked information to their tech department. The URL below my signature is the site having the problem I've outlined when attempting to access linked images.
    Thank you
    Vincent G. Flaherty, Principal
    Hamilton 1:1 Communications, LLC
    410 Fern Road
    Orwigsburg, PA 17961-9210
    Tel: (267) 261-8693
    Designed for Submarines:
    http://www.designed4submariners.com

Maybe you are looking for