Open an Terminal while running a script #!/bin/sh

Hy
I usually use my Terminal to run my Script to backup some folders with RSync.
I created an workflow (shell-script-run in shell /bin/sh ) to run this script.
Is it possible to open the terminal to see it running when I run my script.
Like when I run it in my Terminal by hand
with "sudo ./backup" ...
HOW? I want to see what it does...

Hey Michael,
Just wondering how you managed to get that applescript:// url to work properly, so that clicking on it opened it in Script Editor? I used to do that all the time using Convert Script to Markup Code, but haven't been able to get the link to work since Apple switched over to the new forum software.
Example:
Open the AppleScript "Untitled" in a new Script Editor window.
Dual 2.7 GHz PowerPC G5 w/ 2.5 GB RAM Mac OS X (10.4.4)

Similar Messages

Error while running OMBPlus Script

Hi,
I am getting below error while running OMBPlus script.
+../../../jdk/bin/java[87]: getconf: not found+
OMB*Plus: Release 9.2.0.4.0
Copyright (c) 2003 Oracle Corporation. All rights reserved.
Exception in thread "main"
I am not even able to run ./OMBPlus.sh.
Can anyone help me on this?
Thanks in advance,
Regards,
Sachin Bansal

Hi Nawneet,
Thanks for the reply..
I tried the same thing on our server. But there also I am getting the same error.
Am I missing anything?
What I am doing is:
1. Created one .tcl file (deploy_map.tcl).
2. Going to path where OMBPlus.sh resides i.e.$OWB_HOME/bin/unix
3.Then I called ./OMBPlus.sh and passed the path of deploy_map.tcl as an argument.
For e.g. if path of deploy_map.tcl is /abc/xyz/deploy_map.tcl
Then I would call OMBPlus like below:
./OMBPlus.sh /abc/xyz/deploy_map.tcl
Even if I would not pass any argument then still it should be connected to OMBPlus. But that's not happening.
Regards,
Sachin Bansal

How to find the missing fonts while running the script?

hi,
I need to create a script to find the missing font. not only for that. Actually i created a script to read the file properties. but i have a problem while running the script.
I have put "User Interation Level" to never interact. Even i need to check wheather each file have "missing fonts". mean time i never stop the script.
Is It Possible???
Regards,
SubhaOviya

Here's a shot of the Find Font Dialog:
Papyrus (highlighted in the list) is missing, and there's a yellow warning triangle to show that. Fonts that ar not missing have an icon to show the type of font. You'll also see it shown as missing in the "Info" box at the bottom of the dialog.
If you use the Replace With dropdown you will only see fonts listed that are installed on the system. In order to actually use the missing font, rather than substitute a different font in its place, you must obtain and install the missing font on the system.
Are you seeing something different when you open Find Font?

An error occured while running a script

On launching Bridge, I an consistently receiving the following error.
"There were problems loading a startup script the last time bridge was launched. Would you like to load them now?"
Clicking [Yes] produces the following error:
An error occurred while running a script. The script may not be compatible with this version of Bridge. Check for available updates by selecting the Updated command in the Help Menu
Error in /Library/Application Support/Adobe/StartupScripts/AdobeStockPhotos.jsx
Line 54: result = eval(script);
Timeout while waiting for the engine
I am running Bridge Mac CS2 - 1.0.4.6
Adobe Stock Photos Update 1.0.8
Power Mac G4 733 / OS X 10.3.9
Updating either Bridge or Adobe Stock Photos does not correct the behavior.
And curiously Stock Photos appears in the Favorites pane and appears to function.
Any help ?
Kurt Griffith.

Good day,
The Bridge v1.04.6 PS CS2 I am presently using has always come up with the Internet connection Error Message and none of my large imaging machines are connected nor will they ever be connected to the Internet.
Is there a setting to do away with the Bridge trying to connect on my
behalf ? I've spent a lot of time trying to 'fix' a problem that shouldn't have arisen.
It wastes a lot of time trying to do something, which I do not want it doing.
Thanks for any assistance you can provide in the matter. And please
keep cranking out your wondrous though not totally controlable software, or so it seems.
Best - Stephen Graham

Failed tp open .prp file while running HAL ...it says Sharing voilation ..

Failed tp open .prp file while running HAL ...it says Sharing voilation ..
I am running a HAL job.
While opening .prp file it says error Sharing voilation cannot open file.
Please help to resolve issue.

Are you sure there are not multiple instances of the prp open, say 2 remote connections both with the file open.
If there is a lock on the file and you are able to reboot the machine I would give that a go.
Cheers
John
http://john-goodwin.blogspot.com/

Why MicroSoft 2000 SR needed while running the script using test manager???

hi all,
whenever I trying to run a script using test manager,one POP-UP comes which starts installing MICROSOFT 2000 SR.
and in few seconds it complaining for some missing component,
can any body tell me why it is happening.
what is the need of Microsoft 2000 SR while running the script in test manager.
tnx
USOni

USoni
I have seen that problem happening before, even that i was never able to figure out why, something that you can try is changing the service log in credentials for both:
Oracle Application Testing Suite Agent Service
Oracle Application Testing Suite Application Service
and use a proper user with admin rights.
let me know if that helped
Regards
Alex

Getting error while running shell scripts

Hi DBAS,
I Have one requirement,i want connect n database dynamically by using dynamic password and execute some oracle commands,i written some script ,but while running i am getting error,please any one correct my error ,i am not able to getting error
passwrd.pw like this
abc@abc
aaa@aaa
# vi healthcheck.ksh
#!/bin/ksh
export PW=`cat /applis/forum/pune/dbhealthchecks/.pw/passwrd.pw`
for (( i = 0 ; i < ${#PW[@]} ; i++ ))
do
sqlplus -s larry/$PW<<EOI
spool sysdate.dat
select sysdate from dual;
done
exit;
EOI
error :
line 2: syntax error at line 11: `for' unmatched
thanks!
larry
Edited by: tmadugula on Mar 18, 2011 6:26 AM

Could you explain the reason for the for loop and connection attempts while incrementing var $i?
It is also no a good idea to provide a password at the command line since it can be seen with 'ps' command.
Better:
sqlplus -s <<-EOI
connect larry/$PW
etc.

Error While running WLST script to create SOA Domain in Clustered Environme

Hi,
I am trying to run WLST script to create SOA Domain in clustered environment.The script is as follows.
import sys
print "@@@ Starting the script ..."
global props
from wlstModule import *#@UnusedWildImport
from java.io import FileInputStream
from java.io import File
#=======================================================================================
# Create Boot Properties File
#=======================================================================================
def createBootPropertiesFile(directoryPath, username, password):
adminserverDir = File(directoryPath)
bool = adminserverDir.mkdirs()
fileNew=open(directoryPath + '/boot.properties', 'w')
fileNew.write('username=%s\n' % username)
fileNew.write('password=%s\n' % password)
fileNew.flush()
fileNew.close()
def createNodeManagerPropertiesFile(directoryPath, username, password):
adminserverDir = File(directoryPath)
bool = adminserverDir.mkdirs()
fileNew=open(directoryPath + '/nm_password.properties', 'w')
fileNew.write('username=%s\n' % username)
fileNew.write('password=%s\n' % password)
fileNew.flush()
fileNew.close()
def createAdminStartupPropertiesFile(directoryPath, args):
adminserverDir = File(directoryPath)
bool = adminserverDir.mkdirs()
fileNew=open(directoryPath + '/startup.properties', 'w')
args=args.replace(':','\\:')
args=args.replace('=','\\=')
fileNew.write('Arguments=%s\n' % args)
fileNew.flush()
fileNew.close()
I am getting the error :
Problem invoking WLST - Traceback (innermost last):
(no code object) at line 0
File "D:\Oracle\Middleware\Oracle_SOA1\bin\SOADomainScript.py", line 11
adminserverDir = File(directoryPath)
^
SyntaxError: invalid syntax
Do i need to set any jar in the classpath? Already jython.jar is available in the classapath.
Thanks in advance.
Regards,
Subha

Hi,
I am trying to run WLST script to create SOA Domain in clustered environment.The script is as follows.
import sys
print "@@@ Starting the script ..."
global props
from wlstModule import *#@UnusedWildImport
from java.io import FileInputStream
from java.io import File
#=======================================================================================
# Create Boot Properties File
#=======================================================================================
def createBootPropertiesFile(directoryPath, username, password):
adminserverDir = File(directoryPath)
bool = adminserverDir.mkdirs()
fileNew=open(directoryPath + '/boot.properties', 'w')
fileNew.write('username=%s\n' % username)
fileNew.write('password=%s\n' % password)
fileNew.flush()
fileNew.close()
def createNodeManagerPropertiesFile(directoryPath, username, password):
adminserverDir = File(directoryPath)
bool = adminserverDir.mkdirs()
fileNew=open(directoryPath + '/nm_password.properties', 'w')
fileNew.write('username=%s\n' % username)
fileNew.write('password=%s\n' % password)
fileNew.flush()
fileNew.close()
def createAdminStartupPropertiesFile(directoryPath, args):
adminserverDir = File(directoryPath)
bool = adminserverDir.mkdirs()
fileNew=open(directoryPath + '/startup.properties', 'w')
args=args.replace(':','\\:')
args=args.replace('=','\\=')
fileNew.write('Arguments=%s\n' % args)
fileNew.flush()
fileNew.close()
I am getting the error :
Problem invoking WLST - Traceback (innermost last):
(no code object) at line 0
File "D:\Oracle\Middleware\Oracle_SOA1\bin\SOADomainScript.py", line 11
adminserverDir = File(directoryPath)
^
SyntaxError: invalid syntax
Do i need to set any jar in the classpath? Already jython.jar is available in the classapath.
Thanks in advance.
Regards,
Subha

Have terminal NOT run a script when it loads

I recently wrote a basic shell script and saved it as a .command file to run from the desktop. Since then, whenever I open the terminal it automatically runs the script then exits the terminal. If I hide the file (mv pt-noplugs.command .ptnoplugs.command) it simply opens the terminal and closes it immediately. I have tried changing the default shell from bash to something else but this doesn't seem to make a difference. I also don't seem to have a .bashrc file when it normally is /home/user/.bashrc (I'm used to linux). Any help would be appreciated. Below is the script:
# Shell Script to start Pro Tools HD with no waveshell Plug-In
echo "*"
echo "* Script: pt-noplugs.command"
echo "* Please Leave This Window Open Until ProTools Has Exited"
echo "*"
# Move waveshell Plug-In Files to Plug-Ins (Unused)
cd "/Library/Application Support/Digidesign/Plug-Ins/"
mv -v Waveshell-DAE_5.9.1.dpm "../Plug-Ins (Unused)"
# Start Pro-Tools
/Applications/Digidesign/Pro\ Tools/Pro\ Tools\ HD.app/Contents/MacOS/Pro\ Tools\ HD
# Restore Plug-Ins directory
cd "../Plug-Ins (Unused)"
mv Waveshell-DAE_5.9.1.dpm ../Plug-Ins
echo "*"
echo "* Thank You. This Window May Now Be Closed"
echo "*"
exit

I forgot to add: when I login as a different user and load terminal is does NOT run the script mentioned before.

InDesign Quit while running the script

Hi guys,
Create A new document with one page of content as " ;" then run this below script.
while running the below script in InDesign CS3 5.0.4 (Windows), Suddenly Application has been closed.
if(app.documents.length == 0)
alert("No Documents are Open...");
else
app.findTextPreferences = null;
app.changeTextPreferences = null;
app.findChangeTextOptions.wholeWord = false;
app.findChangeTextOptions.caseSensitive = false;
app.findChangeTextOptions.includeMasterPages = false;
app.findTextPreferences.findWhat = " ;";
app.documents.item(0).findText();
app.changeTextPreferences.changeTo= "<2009>; ";
app.documents.item(0).changeText();
Anyone help me, Where the errors occured????
thanks,
Nagaraj

Nagaraj1983 wrote:
There is no Plug-in has been installed..!!!!
You didn't understand me.
I'm telling you to install one!
Here's a very nice one to have:
http://www.dtptools.com/product.asp?id=ksin
Try installing this plugin and then running your script.

Error while running InstallOracleProfile script

good evening every one,
i have installed odac for VS 2010,while running the InstallOracleProfile script the following error occurs can any one help me in solving this problem.im using windows os. the error as follows
Connected.
------ Running 'C:\Users\johny.OOMSYSTECH.000\Desktop\prakash\odac_path\product\11.2.0\client_1\ASP.NET\SQL\InstallOracleProfile.sql' @PRAKASH.orcl ------
USER
PRAKASH
old 33: execute immediate 'CREATE PUBLIC SYNONYM ora_aspnet_Prof_GetProperties FOR &CurrentUser..ora_aspnet_Prof_GetProperties';
new 33: execute immediate 'CREATE PUBLIC SYNONYM ora_aspnet_Prof_GetProperties FOR PRAKASH.ora_aspnet_Prof_GetProperties';
old 34: execute immediate 'CREATE PUBLIC SYNONYM ora_aspnet_Prof_SetProperties FOR &CurrentUser..ora_aspnet_Prof_SetProperties';
new 34: execute immediate 'CREATE PUBLIC SYNONYM ora_aspnet_Prof_SetProperties FOR PRAKASH.ora_aspnet_Prof_SetProperties';
old 35: execute immediate 'CREATE PUBLIC SYNONYM ora_aspnet_Prof_GetNOfInactPf FOR &CurrentUser..ora_aspnet_Prof_GetNOfInactPf';
new 35: execute immediate 'CREATE PUBLIC SYNONYM ora_aspnet_Prof_GetNOfInactPf FOR PRAKASH.ora_aspnet_Prof_GetNOfInactPf';
old 36: execute immediate 'CREATE PUBLIC SYNONYM ora_aspnet_Prof_GetProfiles FOR &CurrentUser..ora_aspnet_Prof_GetProfiles';
new 36: execute immediate 'CREATE PUBLIC SYNONYM ora_aspnet_Prof_GetProfiles FOR PRAKASH.ora_aspnet_Prof_GetProfiles';
old 37: execute immediate 'CREATE PUBLIC SYNONYM ora_aspnet_Prof_DeleteProfiles FOR &CurrentUser..ora_aspnet_Prof_DeleteProfiles';
new 37: execute immediate 'CREATE PUBLIC SYNONYM ora_aspnet_Prof_DeleteProfiles FOR PRAKASH.ora_aspnet_Prof_DeleteProfiles';
old 38: execute immediate 'CREATE PUBLIC SYNONYM ora_aspnet_Prof_DeleteInactPf FOR &CurrentUser..ora_aspnet_Prof_DeleteInactPf';
new 38: execute immediate 'CREATE PUBLIC SYNONYM ora_aspnet_Prof_DeleteInactPf FOR PRAKASH.ora_aspnet_Prof_DeleteInactPf';
old 39: execute immediate 'CREATE PUBLIC SYNONYM ora_aspnet_Prof_pkg FOR &CurrentUser..ora_aspnet_Prof_pkg';
new 39: execute immediate 'CREATE PUBLIC SYNONYM ora_aspnet_Prof_pkg FOR PRAKASH.ora_aspnet_Prof_pkg';
PL/SQL procedure successfully completed.
Package created.
Package body created.
Function created.
Function created.
Function created.
Function created.
Function created.
Function created.
Grant succeeded.
Grant succeeded.
Grant succeeded.
GRANT ora_aspnet_Prof_BasicAccess TO ora_aspnet_Prof_FullAccess
ERROR at line 1:
ORA-01919: role 'ORA_ASPNET_PROF_BASICACCESS' does not exist
GRANT ora_aspnet_Prof_ReportAccess TO ora_aspnet_Prof_FullAccess
ERROR at line 1:
ORA-01919: role 'ORA_ASPNET_PROF_REPORTACCESS' does not exist
Grant succeeded.
Grant succeeded.
Grant succeeded.
Grant succeeded.
Grant succeeded.
Grant succeeded.
---------------------- Done ----------------------
thank you
prakash

Earlier in the script, the following CREATE statements were called:
-- Create roles. Create role privilege is required.
execute immediate 'CREATE ROLE ora_aspnet_Prof_BasicAccess';
execute immediate 'CREATE ROLE ora_aspnet_Prof_ReportAccess';
execute immediate 'CREATE ROLE ora_aspnet_Prof_FullAccess';
If they didn't succeed, that would explain the GRANT errors you see. If you didn't grant the CREATE ROLE privilege to the user, that would explain why CREATE ROLE calls failed.

Data access error while running the script in fdm workbench script editor

Hello Experts,
I have been getting the error when i run the script in script editor of fdqm workbench client.this is the error
                          -2147467259 Data access error and it is navigating the error at line 30 about this script "Set rsAppend = DW.DataAccess.farsTable(strWorkTableName)"
Please revert me asap where i should load the data from peoplesoft to one of my planning database through fdm.
Thanks in advance...

Hi,
Thanks for your suggestion's here i am going to run the datapump script so while i am running in workbench it is throwing data access error.So as you guy's suggested i created one import format and added this script to that import format which is added to one of my location even it is throwing the same error.I am getting the error at this sentence   "strWorkTableName" I want to know what is this where it reflect's?So my question is Is there any difference while running data pump or integration script.Please let me know a detailed navigation steps to run this script's with out data access error to run these kind of scripts.
Note:Again my target is to load the data to planning database through fdqm which i am doing through sql statement's.
Suggest your valuable suggestion's
Thanks in advance...
I am getting the error at this sentence   "strWorkTableName" I want to know what is this where it reflect's?

"Failed to open report" error while running reports

We have a web application develeoped in ASP.Net, SQL Server 2005 , Crystal Reports 10.0. Sometimes if a large number of users run reports from their individual nodes they receive an error "Failed to open report ", if we restart the IIS they are able to run the reports. In addition to this the users also sometimes get the error "Maximum Report limit attained". Can any one provide me with a solution other than restarting the IIS.

Hi Balla
If you face this issue only while running the reports from a .Net web application, then please post this thread to the sdk development forum.
You can follow the link below:
https://www.sdn.sap.com/irj/sdn/businessobjects-sdk-forums
Thanks

Getting an error message while running FX script logic

We are getting the following error message, while running the FX script logic - RUN_LOGIC:MDX statement error:"Value (Entity value) for characteristic /CPMB/U8D5FIT". Any help is truly appreciated. We are using the standard FX logic scrip *RUN_PROGRAM CURR_CONVERSION

Hi,
Hope all the required currency configuration settings are followed in Entity, Input currency, Category, Account correctly. Also reporting currency indicates the right reporting currency with the 'Reporting' propert set to 'Y' to the currency that you want to report in.
For the period that you are running the currency trans, could you also maintain rates for the reporting currency as 1.
Check your rate data. And please post your currency conversion script here.
Thanks,
Sreeni

IDCS5-win. Error while running a script from indesign(not via estk)

Hi all,
After running the script from indesign, I get following error
ASSERT '(engine->getDebugFlags() & ScScript::kExtendedErrors) == ScScript::kExtendedErrors' in ..\..\..\source\components\script\javascript\JavaScriptRunner.cpp at line 412 failed.
..\..\..\source\components\script\javascript\JavaScriptRunner.cpp (412)
any idea about this?
The script runs fine when run from ES tool kit.
Thanks

Hi,
My colleague found the problem. We were using extendables library and we still haven't figured out what was actually happening, but removing it solved the problem.

Open an Terminal while running a script #!/bin/sh

Similar Messages

Maybe you are looking for