Open analysis report in BI Publisher in OBIEE plus

Hi,
I am unable to open a report in BI Publisher which was generated in analysis in OBIEE plus(11g). Previously I did it through Oracle BI Analysis+ in the Data Modle (Data Set).
Now I am unbale to find the reports through same process. I noticed only two empty folders Weblogic and Users.
Can any one tell me how to open the reports in BI Publisher from anaysis..
Thanks & Regards.

Hi,
I am unable to open a report in BI Publisher which was generated in analysis in OBIEE plus(11g). Previously I did it through Oracle BI Analysis in the Data Modle (Data Set).
Now I am unbale to find the reports through same process. I noticed only two empty folders Weblogic and Users.
Can any one tell me how to open the reports in BI Publisher from anaysis..
Regards.
DCB

Similar Messages

  • Unable to open Schedules tab in BI Publisher in OBIEE 10g

    Hi all,
    We recently observed that the Schedules tab goes into hung state when tried to navigate. This is not allowing us to analyze the schedules as well as check which reports are scheduled. Please share your thoughts.
    Regards,
    Vinay

    Make sure(or verify) that you have valid info at
    Admin->System Maintenance->Scheduler Configuration
    for more info
    http://docs.oracle.com/cd/E10091_01/doc/bip.1013/b40084/T434820T487784.htm

  • Issue while opening the web analysis reports

    Hi,
    One of our user is not able to open a web analysis report with an error messages saying
    "Java.Lang.Exception: Unexpected HTTP status code of 500 received from server"
    "Document does not exist or no authorization to open the document"
    Other users with the same level of access are able to open the report fine and also the same user is able to access the report fine with a test id from his machine.
    What could be wrong? Any suggestions please.
    The only thing I see here, something wrong with userd ID or password.
    Thanks
    Prasad

    Hi,
    I had also faced this problem earlier. I was using HFM as data source for WA reports. After searching I found that there was some change at HFM level. Some dimensions/members had been deleted or added in HFM. And I was using those missing members in WA Grid.
    I had to recreate my reports again as I didn't get any other way to deal with this problem.
    Please shared any other alternative option, if you found while working on this issue.
    Thanks & Regards,
    Mohit Jain

  • Issue opening Web Analysis report

    I create, with buttons, links between reports in web analysis. Sometimes when I click on one of them in workspace, it doesn't open linked report, but another one. Furthermore this last one is automatically saved as the previous report, and I can't open the original linked report. Any suggestion about this ?
    Thanks in advance.

    Hi Natesh,
    Thanks for your reply to my query posted in this forum. Please find my inline answers between asterisk to your questions:
    Whatz the source of your Grid? Relational SQL Query (OR) A spreadsheet with Essbase database connection file?
    * Yes, the source is Essbase.*
    If source is Essbase, it seems- Outline might've got altered when you're trying to refresh the report.
    * The outline was in tandem when we tried running this report in WebAnalysis. This outline & WebAnalysis report which is in Dev Server is a replica of the one in Test Server where it runs fine. *
    If source is based on a Relational SQL query, chances are that- Query is no longer valid.
    * NA as this statement is NOT applicable to our source.*
    If it's Essbase, it's also likely that- It ran out of time while fetching the data from Essbase. You may try playing around with the parameters in Essbase.cfg file.
    * This might be one of the causes, but I double checked the all the tunning parameters in Essbase.cfg file in place.*
    Could you please through more observation on this issue. Let me know if any further information is needed!.
    Thanks for your time.
    Regards,
    Krishan
    Edited by: user10475612 on Nov 8, 2009 1:07 PM
    Edited by: user10475612 on Nov 8, 2009 1:09 PM
    Edited by: user10475612 on Nov 8, 2009 1:12 PM

  • Unable to open web analysis reports through workspace

    Hi,
    I am connecting web analysis with MSSQL server 2000 and generating reports. I am using essbase 9.3.1 version.
    But my problem now is that I can just open these reports from web analysis studio and cannot open them from workspace. In workspace, if I right click on the report and open it from web analysis studio it does open. But it does not open by double clicking the report in workspace. It just shows a blank report on just parts of the report.
    The issue is only there for the reports that are getting data from relational db (MSSQL server 2000). The other reports that are using the cube data are fine and opening from everywhere.
    Are there any other configuration settings involved in order to open a web analysis report(that uses relational db) from workspace?
    Thanks in advance,
    John

    Hi Atul,
    Try using the in built config checker:
    http://localhost:16000/WebAnalysis/config
    This has several tests you can perform to see what's running.

  • ABC-analysis in Open Items report

    Good day, dear experts!
    I got a task from my chief to find out how to use menu path "Go to - ABC analysis" in Open Items report FBL1N/FBL5N.
    Everything I've found is a message "ABC analysis not possible here", Message no. 0K076, and old-old note for this message 414907.
    Do someone use ABC-analysis for open items?
    I think it's useless, but maybe I don't understand something...
    Irina

    Hi,
    Nope, it is useful.
    Execute FBL1N and select line items (Edit > Select All).
    Then click on any amount column.
    Then click on Goto > ABC Analysis
    You will get the options to classify the line items in the A, B, C categories based on the % creteria etc. on that screen.
    Regards,
    Gaurav

  • Not able to open web analysis reports after upgradation

    we have upgraded Hyperion 11.1.1.3 to 11.1.2.2 version, after this process we are not able to open web analysis reports
    These reports are still pointing to old servers so, how to edit this database connection details in the new version??
    Edited by: 1007326 on May 22, 2013 3:29 AM

    Hi,
    Welcome to Forums...!
    I think we need to change the database connection details in the Web analysis.
    goto file --> Edit --> browse the database connection then change the server name in the connection details.
    may be this will help to resolve your issue.
    Thanks,
    mady

  • Error while opening the web analysis reports.

    Hi,
    Whenever i am trying to open any web analysis reports i am getting the error message as "error occurred while opening document. document Id={0}. Is anyone have any idea about this issue.
    Thanks & Regards
    Ekta

    Hi,
    I had also faced this problem earlier. I was using HFM as data source for WA reports. After searching I found that there was some change at HFM level. Some dimensions/members had been deleted or added in HFM. And I was using those missing members in WA Grid.
    I had to recreate my reports again as I didn't get any other way to deal with this problem.
    Please shared any other alternative option, if you found while working on this issue.
    Thanks & Regards,
    Mohit Jain

  • OBIEE 10G - unable to open a report

    Hello All,
    I am getting the below error when I am trying to open a report which is saved using apostrophe(') in the name of the report, for example my report name looks like Vendor's list. Every thing was good while i was developing the report, saved it using an apostrophe, but now when i am trying to open the report i get below error, i tried using IE, Mozilla but in vain.
    Version - 10.1.3.4
    Due to the presence of characters known to be used in Cross Site Scripting attacks, access is forbidden. This web site does not allow Urls which might include embedded HTML tags.
    Can any one please let me know how to overcome this issue.
    Any help is appreciated.
    Thank you,
    Srini.

    Hi Srini,
    Maybe you have to replace the 'apostrophe' with it's URL-encoding equivalent; %27 (http://www.w3schools.com/TAGS/ref_urlencode.asp)
    Or you could add the HardenXSS element to the instance config --> http://gerardnico.com/wiki/dat/obiee/hardenxss
    Good Luck,
    Daan Bakboord
    http://obibb.wordpress.com

  • How to build a Analysis report in OBIEE 11g

    Hi All,
    I have a query regarding 'How to' to build an analysis report in OBIEE 11g.
    The data model is a financial data model, where information such as Actual, Plan, Forecast, What - if etc for current AND prior year need to be displayed in a dashboard.
    I created two analysis reports one for current year Rep1 and second for prior year Rep2 each with filter criteria as current year and prior year respectively based on years column. and then in the dashboard I created prompt based on scenario column (radio button) for Actual, plan, Forecast, and wht if.
    I am able to show the current vs prior year data in the same dashboard for Actual or Plan or forecast or what if (depending on data availability in the database).
    I want to achieve the same information in a single analysis report instead of two separate analysis reports. I do not want to create separate physical report for current and prior year data.
    I need one analysis report which I can use in dashboard and depending on selection for scenario (actual , plan, forecast or wht if) I want to show the current AND prior year data the way I achieved in with two seperate reports embedded in their respective sections as explained above.
    Does any one have idea how to achive this by building single analysis report?
    If you need any more clarificaiton or have any queries, please let me know.
    Thanks and Regards
    Santosh

    As per I understand your requirement,
    In your Dashboard create a Presentation variable which receives the value of year you select.
    Now in your analysis, select the year column along with all the measures you want (Actual, plan, Forecast, and what-if, etc).
    Create a filter on Year column and convert it into SQL. Put the condition as:
    "Year" BETWEEN @{Presentaion_Variable} - 1 AND @{Presentation_Variable}
    You will get the result for selected year and the previous year.
    Hope it helps..
    Regards,
    A.K.

  • Calculationg current and past year for a Analysis report in obiee 11.5

    Dear All,
    Need some help here.
    I am a beginner in OBIEE and need some help to build a report in obiee 11.5 as described below;
    I need to create a PnL report such that I show current years profit and loss AND prior year profit and loss figures in a report side by side for comparitive analysis for user.
    My data is an essbase database, and have a years dimension with values 'current year' , 'F08', and 'Prior Year'. and other measurs such as revenue, % revenue, gross profit, cost of sales, operating expenses etc. (I am using 107 from oracle downloads) for obiee 11.5
    There is another dimesion called time period with members as Q1, Q2, Q3, and Q4, and each having respective months (e.g. Jan, Feb, Mar for Q1 etc)
    I also have a scenario dimension with members as Actual, plan, Forecast, Wht -if..
    Now I need to create a this report.
    I created this report based on approch no 1 below;
    Appraoch 1
    - Create two analysis reports with all the above columns.
    - specify filter for year column equal to current year for first report
    - specify filter for year column equal to prior year for second report
    - create a dashboard with a promt (radio button) based on column scenario
    - create two sections placed side by side below the promt and place above two reports in those two sections so that they appear side by side
    Nw when I run this dashboard, it works fine, and shows me the current and prior data for actual, plan etc...
    BUT....
    I need to create the same reports using a single analysis report instead of two separate reports with hardcoded values for year filter.
    Now I tried use AGO funtions on but , it requires a column with numerical value so that it can calculate the past year, but in my case year is a column hving text value and hence i cant use it.
    I would like to know how to build such a report using any other variable or function or any rpd level modifitions.
    If I had a year dimesion with numeric values, then how would I use to calculate the past year once u select current year .?
    Let say values are 2012, 2011, 2010 etc. so If I select 2012 as current year, I should get data for 2012, and 2011, if I select 2011, then I should get data for 2011 ,and 2010.
    Please help me to build logic either at analysis level or at repository level
    Thanks and Regards
    Santosh

    Hi,
    As per I understand your requirement,
    In Pivot table, place 'Year' in pivot columns instead of rows.
    Create an SQL filter on Year and put the condition as:
    *"Year" BETWEEN @{Presentation_Variable} - 1 AND @{Presentation_Variable}*
    You will get the result for selected year and the previous year.
    Hope it helps..
    Regards,
    A.K.

  • MDX Generation Issues (using Evaluate) in OBIEE Analysis Report

    Hello Everyone,
    I am trying to use Evaluate function in MDX (on a OBIEE 11g Analysis report) to restrict the number of values that i am pulling from the Essbase cube. The MDX Evaluate syntax looks something like this
    EVALUATE('TOPCOUNT(%1.members,100,([Dimension1],[Dimension2],[Dimension3],[Dimension4]))',"Accounts"."Gen10,Accounts")
    EVALUATE('TOPCOUNT(%1.members,100,([Dimension1],[Dimension2],[Dimension3],[Dimension4]))',"Products"."Gen10,Products")
    I am putting the above evaluate formula in the "selected columns" on the OBIEE Analysis report. So i am pulling accounts, products and the measure from the essbase cube.
    However I am getting the following error when the analysis report is run
    Query Status: Aggr Essbase Error: *Repeated dimension [Accounts] in MDX query*
    Do we need any configuration changes/ settings on the RPD model to ensure we dont get this error?
    Regards
    Aby

    Hi veeravalli,
    Thank you for you reply. I got it.
    However, any idea to solve the issue?
    I tried to do it in RPD by case when,
    e.g. Acutal Sales: case when scenario='Actual' then salesamount end
    Budget Sales: case when scenario='Budget' then salesamount end
    Actual/Budget%: (Actual Sales/Budget Sales) *100
    So there is no error, Actual Sales and Budget Sales are correct, but Actual/Budget % shows nothing in report
    Thanks.
    BCHK

  • Essbase data crossjoin error in OBIEE analysis report

    Hi all,
    Anyone got the following error in OBIEE analysis report:
    Error Codes: OPR4ONWY:U9IM8TAC:OI2DL65P
    State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 43113] Message returned from OBIS. [nQSError: 96002] Essbase Error: Syntax error in input MDX query on line 13 at token 'crossjoin' (HY000)
    The OBIEE version is 11.1.1.6.2
    Data is from Essbase Cube, version 11.1.2
    The report is a simple cross tab table and we added 'After' aggregation to show grand total.
    The error show up when we drill down on dimension, click '+'.
    However, if I remove the 'After' aggregation. There is no error at all
    Thank you
    BCHK

    Hi veeravalli,
    Thank you for you reply. I got it.
    However, any idea to solve the issue?
    I tried to do it in RPD by case when,
    e.g. Acutal Sales: case when scenario='Actual' then salesamount end
    Budget Sales: case when scenario='Budget' then salesamount end
    Actual/Budget%: (Actual Sales/Budget Sales) *100
    So there is no error, Actual Sales and Budget Sales are correct, but Actual/Budget % shows nothing in report
    Thanks.
    BCHK

  • Error while opening hierarchy Location Analysis Report in Bex

    Hi All,
    I encounter an error while generating a Bex report Location Analysis report which contains hierarchy for functional location.The infoobject is 0FUNCT_LOC.
    There is a global hierarchy created for this infoobject and within this global hierarchy there are many hierarchies which come from differernt source system around 5 source systems.
    The error i get is "Warning error when writing in the internal buffer."
    Warning presentation hierarchy ZGBL_HIER acts as a dynamic filter".
    ZGBL_HIER is the global hierarchy created.And i have provided this name in the query.
    Please can someone help me with this issue.

    Hi,
    May be it worked in your case How the job names going to affect the execution of the job. The issue is purely because of RFC timeout (As per the logs). I recommend to change the parameter in the configuration tab as recommended by Sunny in the previous thread.
    Regards,
    Raghu

  • OBIEE (Windows)  Ceate report in BI Publisher gives error

    Dear,
    I am trying to create report in Bi publisher , First I create data base connection then sucessfully then i go to the report tab then create report it gives this error, please help me in this regards
    D:/install_obiee/xmlp/XMLP/Reports/BIPUBLISHER/hussnnain/hussnnain.xdo

    Hi,
    Check this....http://download.oracle.com/docs/cd/E14004_01/books/Reports/ReportsTroubleshoot6.html
    Did you create rtf template and uploaded it in layouts?
    This would be right place for your questions...BI Publisher
    Hope this helps :-)
    Regards,
    Srikanth

Maybe you are looking for