Open and Closed network access?

Is it possible to have both an open network portion (no password), as well as a closed (password protected) network setup with a single Time Capsule/Airport Extreme device?
I want to keep my data protected with a password access to the network, but would like to also have an open network for guests that does not always require a password just to access the internet.
Thanks!

Can you clarify what you mean by "closed network"? Normally a "closed" network is one in which the name of the wireless network is not visible.
If you have a dual band AirPort Extreme or Time Capsule it is possible to set up a "main" network that is visible and password protected....and a "guest" network that is "open", not requiring a password to connect.
Important.......The guest network feature cannot be enabled if you are connecting the Extreme or Time Capsule to another gateway device.....a combination modem/router that is provided by a number of service providers.

Similar Messages

Opening and closing Access database in a loop causes an Error.

I am loading test conditions from an Access DB in a multiple nested loop. The loops successively drill into the DB. ei Temperature, Humidity, Power. Consequently the DB is opened and closed numerous (2000) times. The Errors returned are(-2147467259) Unspecified Error or (2147024882) System Resources low. I have disabled result recording in the edit sequence properties dialog. I do see a constant memory consumption, but of 128MB, it never gets below 40MB. I have enclosed the example sequence file I am using.
Attachments:
Open-Close.seq ‏35 KB

Jacy,
"jacy" wrote in message
news:[email protected]..
> I am loading test conditions from an Access DB in a multiple nested
> loop. The loops successively drill into the DB. ei Temperature,
> Humidity, Power. Consequently the DB is opened and closed numerous
> (2000) times. The Errors returned are(-2147467259) Unspecified Error
> or (2147024882) System Resources low. I have disabled result recording
> in the edit sequence properties dialog. I do see a constant memory
> consumption, but of 128MB, it never gets below 40MB. I have enclosed
> the example sequence file I am using.
I've seen problems with OLEDB (which I assume TestStand used behind the
scenes) with Access and SQL where rapid opening/closing of the sam
e source
(database) can generate errors. I don't know for sure, but I assume that
the changes from the last close are not fully propogated before the next
open is processed.
Getting back to TestStand, if all the tables you're querying are in the same
database, then you should just open the database once at the beginning and
close it at the end. Then do seperate table open/closes between the
database open/close.
Bob.

MacBook Pro is operating more and more slowly in opening and closing, opening and closing programs and accessing and closing from mobile broadband. Is there a solution to this problem?

MacBook Pro is operating more and more slowly in opening and closing, opening and closing programs and accessing and closing from mobile broadband. Is there a solution to this problem?

Did you try rebooting?

Can you open a closed network?

I can no longer access the secure wi fi network set up on my Mac Pro, and must use the (insecure) network that came with my router. The regular network name doesn't show as an available network, but I know it is still there because both the name and security type appear when I click "advanced" on System Preferences/Network. I have apparently changed my regular network to "closed" by accident.
I have tried unsuccessfully to sign in as "other network", providing security type and passwork, but it doesn't work.
I need a way to open this closed network. Is this possible? How?
If it is impossible, what must I do to start over?

I have apparently changed my regular network to "closed" by accident.
Or the network is no longer available, temporarly shut down, or you were purposely locked out. Contact the network admin.

Reg: Open and Closed Activities in DTR

Hello Guru's,
I am confused with the Open and Closed Activities in DTR, What are the significance of these activities?
And when does an Open Activity changes to Closed Activity?
And why does an Empty Open Activity gets created?
How does the Open Activities effect the Performance of the system?
In NWDS what is the significance of the Public Part and the dcdef xml files?
Please explain and if possible send the links to better understand these? I tried searching for info but with no luck.
Appreciate the Help.
Thanks & Regards,
Pramod

Dear Pramod,
Activity in general can be considered as the wrapper of your changes.
While working in NWDI, any modification that you perform on your source code must be associated with an Activity.
Some Definitions:
Client DTR: Represents the Local Track file system present on you local machine, where Checked-out a desired code from Server DTR
Server DTR: Represents the Central Repository present on the server, where your source code is checked-in.
Open Activities
These are the activities that are not yet checked-in to Server-DTR, and they represent the Open Version.
Exmple:
1) Suppose you have made some modification in "File A" which is associated in Activity-1
2) When you open the DTR Perspective in your Developer studio, you will be able to see all the changes that you have associated in the Activity-1, this DTR-perspective of your NWDS is also termed as Client-DTR.
3) But, when you open the Server-DTR in DTR Web interface, you will not be able to see the same file structure that is present in your client DTR, it will not contain the changes that you have incorporated in Activity-1.
4) The changes present in Activity-A are not available to any other developers, even if you try to use the same developer ID and load the same track, the activities are still said to be purely Local.
Closed Activities
These are the activities that are already Checked-in to Server-DTR and they represent Closed Version.
Example:
1) In the same example explained above assume that we now Check-in the Activity-1.
2) Now, if you open the Server-DTR in DTR Web Interface, you will be able to see the same file structure that is present in your Client-DTR.
3) Now the changes that were present in Activity-A are also available to other developers too.
Open Activity and Performance
1) Open Activities create a temporary entry point reference on the Server DTR you can serach for open activities in Secer DTR web interface, every single activity occupies space on your local machine. So it may affect the performance only if the activity count is very high.
2) In the local file system, the meta data is stored in the .dcdef file in the _comp
subfolder.
3) The meta data is stored in the .dcdef file, every public part has its own meta data file. They are located in the def subfolder of the component and have the fileextension pp.
Every component (DC) is defined by a set of files, stored and versioned together with the
component in the repository.
u2022 A file with the reserved name .dcdef stores the basic attributes such as name,
description and component type, the parent component (if there is one), a list
of child components (if there are any), a list of dependencies, links to the component
sources, and the access control list. The .dcdef file must be stored directly
in the _comp folder.
u2022 The folder _comp/def contains one file for each public part of the component,
which carries the name of the public part with the extension .pp. This file contains a list
of the development objects belonging to the public part and an access control list for
this public part.
Both .dcdef and .pp files are stored in an XML-based format; you can display them in the
content display of the Repository Browser or with any text editor. However, this is
not necessary. To create and edit these files, use the component tools of the SAP NetWeaver
Developer Studio.
In exceptions, you can manually repair the .dcdef or a .pp file of a component.
Note that direct manipulations are dangerous and can render a component
unusable.
I hope you will get a clear picture now.
Regards,
Shreyas Pandya

Open and closed hand cursors

I have a drag image application and I wanted to use the open and closed hand cursors to move the image about. It seems there is no easy way of accessing these in Java. After searching for cursor names etc.. I decided to hard code the cursors from the .gif image. Also I didn't want the .GIFs as files as this adds to loading problems so I ended up using arrays of pixels that took a little while to enter.
I'm giving you the code if you ever need to use it as I typed it in and wouldn't want anyone else to have to do the same.
int curWidth=32;
               int curHeight=32;
               int curCol;
               Image img;
               int x,y;
               int closed_black[] = { 6,5,7,5,9,5,10,5,12,5,13,5,5,6,8,6,11,6,14,6,
                         15,6,5,7,14,7,16,7,6,8,16,8,5,9,6,9,16,9,4,10,
                         16,10,4,11,16,11,4,12,15,12,5,13,15,13,6,14,14,14,
                         7,15,14,15,7,16,14,16,0};
               int closed_white[] = { 6,4,7,4,9,4,10,4,12,4,13,4,5,5,8,5,11,5,14,5,15,5,
                         4,6,6,6,7,6,9,6,10,6,12,6,13,6,16,6,4,7,15,7,17,7,
                         5,8,17,8,4,9,17,9,3,10,5,10,15,10,17,10,3,11,17,11,
                         3,12,16,12,4,13,16,13,5,14,15,14,6,15,15,15,6,16,
                         15,16,7,17,14,17,0};
               int closed_whiteruns[] = {6,13,7,15,7,15,5,15,5,15,5,14,6,14,7,13,8,13,8,13,0};
               int open_black[] = { 10,3,11,3,6,4,7,4,9,4,12,4,13,4,14,4,5,5,8,5,9,5,12,5,
                         15,5,5,6,8,6,9,6,12,6,15,6,17,6,6,7,9,7,12,7,15,7,16,7,18,7,
                         6,8,9,8,12,8,15,8,18,8,4,9,5,9,7,9,15,9,18,9,3,10,6,10,7,10,
                         18,10,3,11,7,11,17,11,4,12,17,12,5,13,17,13,5,14,16,14,6,15,
                         16,15,7,16,15,16,8,17,15,17,8,18,15,18,0};
               int open_white[] = {10,2,11,2,6,3,7,3,9,3,12,3,13,3,5,4,8,4,10,4,11,4,15,4,
                         4,5,6,5,7,5,10,5,11,5,13,5,14,5,16,5,17,5,4,6,6,6,7,6,10,6,
                         11,6,13,6,14,6,16,6,18,6,5,7,7,7,8,7,10,7,11,7,13,7,14,7,17,7,
                         19,7,4,8,5,8,7,8,8,8,10,8,11,8,13,8,14,8,16,8,17,7,19,8,3,9,6,9,
                         16,9,17,9,19,9,2,10,4,10,5,10,19,10,2,11,18,11,3,12,18,12,4,13,
                         18,13,4,14,17,14,5,15,17,15,6,16,16,16,7,17,18,17,7,18,16,18,
                         8,19,15,19,0};
               int open_whiteruns[] = {9,14,8,17,4,16,5,16,6,16,6,15,7,15,8,14,9,14,9,14,0};
               int pix[] = new int[curWidth*curHeight];
               for(y=0; y<=curHeight; y++) for(x=0; x<=curWidth; x++) pix[y+x]=0; // all points transparent
               // black pixels
               curCol=Color.black.getRGB();
               int n=0;
               while(closed_black[n]!=0)
                    pix[closed_black[n++]+closed_black[n++]*curWidth]=curCol;
               // white pixels
               curCol=Color.white.getRGB();
               n=0;
               while(closed_white[n]!=0)
                    pix[closed_white[n++]+closed_white[n++]*curWidth]=curCol;
               // white pixel runs
               n=0;
               y=7;
               while(closed_whiteruns[n]!=0) {
                    for(x=closed_whiteruns[n++];x<closed_whiteruns[n];x++)
                         pix[x+y*curWidth]=curCol;
                    n++; y++;
               img = createImage(new MemoryImageSource(curWidth,curHeight,pix,0,curWidth));
               closedhandCursor = Toolkit.getDefaultToolkit().createCustomCursor(img,new Point(5,5),"closedhand");
               for(y=0; y<=curHeight; y++) for(x=0; x<=curWidth; x++) pix[y+x]=0; // all points transparent
               // black pixels
               curCol=Color.black.getRGB();
               n=0;
               while(open_black[n]!=0)
                    pix[open_black[n++]+open_black[n++]*curWidth]=curCol;
               // white pixels
               curCol=Color.white.getRGB();
               n=0;
               while(open_white[n]!=0)
                    pix[open_white[n++]+open_white[n++]*curWidth]=curCol;
               // white pixel runs
               n=0;
               y=9;
               while(open_whiteruns[n]!=0) {
                    for(x=open_whiteruns[n++];x<open_whiteruns[n];x++)
                         pix[x+y*curWidth]=curCol;
                    n++; y++;
               img = createImage(new MemoryImageSource(curWidth,curHeight,pix,0,curWidth));
               openhandCursor = Toolkit.getDefaultToolkit().createCustomCursor(img,new Point(5,5),"openhand");
               setCursor(openhandCursor);you need to define openhandCursor and closedhandCursor with your other cursor definitions (I made them default to start with) and then just use setcursor as normal. There must be an easier way to do this!
p.s. thanks to Martin Zvarik for the original code here: http://www.jguru.com/faq/view.jsp?EID=9958

Hi,
you can use the same query...Also check the new code after the select..
SELECT BUKRS BELNR GJAHR <b>BSTAT</b>
FROM BKPF
INTO TABLE T_BKPF
WHERE BUKRS = P_BUKRS
AND BSTAT IN ( ' ' , 'A' ) " ' ' - Normal document, A - Parked doc
AND BLART = P_BLART
AND CPUDT IN SO_CPUDT " Selection screen input.
IF NOT T_BKPF[] IS INITIAL.
SELECT BUKRS BELNR GJAHR BUZEI EBELN AUGBL AUGBT
INTO TABLE T_BSEG
FOR ALL ENTRIES IN T_BKPF
WHERE BUKRS = T_BKPF-BUKRS
AND BELNR = T_BKPF-BELNR
AND GJAHR = T_BKPF-GJAHR
AND EBELN IN SO_EBELN " selection-screen input
ENDIF.
LOOP AT T_BKPF.
Parked
IF T_BKPF-BSTAT = 'A'.
    WRITE: / T_BKPF-BELNR , ' - Parked'.
process the next record.
    CONTINUE.
ENDIF.
Check for Open / Closed.
LOOP AT T_BSEG WHERE BELNR = T_BKPF-BELNR
                               AND      BUKRS = T_BKPF-BUKRS
                               AND      GJAHR = T_BKPF-GJAHR
                               AND      AUGBL <> ' '.
    EXIT.
ENDLOOP.
If the return code is 0 then the document is cleared..
IF sy-subrc = 0.
    WRITE: / T_BKPF-BELNR , ' - Closed'.
Else the document is not cleared.
ELSE.
    WRITE: / T_BKPF-BELNR , ' - Open'.
ENDIF.
ENDLOOP.
Thanks,
Naren

Ipod generation 1 apps opening and closing instantly with software version

I have a Ipod Touch generation 1 and have just downloaded version 3.1.3 upgrading from 1.1.5. I am now having a problem with all the apps that I have downloaded from the App store through the IPOD. The apps are opening and closing instantly.
Any comments?
Thank you for any advise and or help!

By a reset, I believe he is referring to holding down the Home button and the Sleep button both at the same time until the apple logo appears on the screen. Ignore the "slide to power off" option that might come up. This process generally takes about 5-15 seconds to see the logo, then about another minute or so after that for the reset to complete.
Now, as for the issue you are seeing, if the reset doesn't resolve it, it might be the same thing I have seen on other iPods. Almost all (if not all) I have seen with this problem have been when the owner unplugged the iPod from their computer before the sync process had fully completed. This seems to leave the iPod app directory structure in some "confused state". Every time I have seen this happen, I have been able to resolve the issue by deleting an app from the device, then re-downloading it using the App Store app on the iPod (while connected to a wifi network). To play it safe, I generally use a free app.
Don't ask me why, but the downloading of an app directly from the device itself seems to reset the iPod app structure and the other apps generally resume wirking properly...

Opening and closing 3rd party applications ??

Does opening and closing 3rd party applications with the click of the home button actually close the application, or, does it continue running in the back ground ?
I noticed most of the 3rd party application don't have a close/exit option, and wonder if opening and closing several applications with the home button can cause the many crashes I have read from fellow iPhone owners ?

Clicking the Home button may close the application depending on the application itself. Some applications that use the network may close when going to the Home screen. To force quit any application, hold the Home button down for about 6 seconds until the Home screen comes up.

When I try to open Firefox I get a message saying it is already open. However it is not open and i cannot access Firefox

When I try to open Firefox I get a message saying it is already open. However it is not open and i cannot access Firefox

See:
* http://kb.mozillazine.org/Recovering_a_missing_profile
* http://kb.mozillazine.org/Profile_in_use
* https://support.mozilla.com/kb/Firefox+is+already+running+but+is+not+responding
If it happens after you've closed Firefox and want to restart the see these:
See "Hang at exit":
*http://kb.mozillazine.org/Firefox_hangs
See "Firefox hangs when you quit it":
*https://support.mozilla.com/kb/Firefox+hangs

Is there a way we can edit and improve existing youtube videos by using premiere pro? Just simple changes like having professional looking opening and closing credits?

Is there a way we can edit and improve existing youtube videos by using premiere pro? Just simple changes like having professional looking opening and closing credits?

Assuming you do not have access to the "original" video/project and the YouTube video is the only copy, there is a method. Try "YouTube Downloader" which is a free software that allows you to download clips from YouTube as .mp4 files. You can then edit with Premiere, and re-encode again for upload to YouTube. Just keep in mind that you are re-compressing the video so there will be some quality loss. The better the quality of the original, the better the copy will hold up.
Thanks
Jeff Pulera
Safe Harbor Computeres

Mac OS 10.7 Server won't mount DMG's after opening and closing - "Resource Temporarily Unavailable"

I am running Mac OS 10.7.3 Server on Mac Pro 2 x 2.66 GHz 6-Core Intel Xeon with multiple users editing on Avid.
DMG's containing raw camera footage are stored on the server, mounted by connected users on their desktops to allow Avid to access the enclosed data within the DMG's. Recently we've started encountering a problem opening the DMG's after they've recently been opened and closed. After opening and closing a DMG. when we try to open it again from the same user/connected computer or any other user/computer we see an error message saying "The following disk images couldn't be opened" NAME OF DMG "Resource temporarily unavailable". This happened to several users with several DMG's.
We have since restarted the server, which appeared to fix the problem for about a week and now we are having the same issue again.
The only changes made recently have been an update to version 4.2 of our ISIS 5000 which all of the Avid systems edit off of, but I don't beleive that to be the cause of the DMG opening issue. I suspect it might be caused by the Pram still thinking that the DMG's are open when they've already been closed.
Not sure if this is relevant, but we had been running only Mac OS 10.7 systems connected to the server but within the last few months we've been adding several more systems including those with OS 10.8.
Has anyone else encountered this issue? Does anyone know the fix to this problem?
Thanks for any and all help!

Also, we have been able to copy the DMGs to desktops and external drives, which normally would not be possible when a DMG is currently open by another user which is the standard situation in which a DMG would say "Resource Temporarily Unavailable".
After copying to another location, they open normally so we believe it is an issue isolated to the server itself.
Thanks!

MB5B Report table for Open and Closing stock on date wise

Hi Frds,
I am trying get values of Open and Closing stock on date wise form the Table MARD and MBEW -Material Valuation but it does not match with MB5B reports,
Could anyone suggest correct table to fetch the values Open and Closing stock on date wise for MB5B reports.
Thanks
Mohan M

Hi,
Please check the below links...
Query for Opening And Closing Stock
Inventory Opening and Closing Stock
open stock and closing stock
Kuber

Open and closed invoices

hi experts,
I have to capture the parked, open and closed invoices in a report in reference to vendor...
I got the parked invoice condition from the table BSTAT either v or w.
But i am not getting the idea how to capture the open and closed invoices...
Some one suggested me to use the ITEMSET structure but i donno how to capture those values can anyone suggest me how to do it...?
SIRI

Hi,
you can use the same query...Also check the new code after the select..
SELECT BUKRS BELNR GJAHR <b>BSTAT</b>
FROM BKPF
INTO TABLE T_BKPF
WHERE BUKRS = P_BUKRS
AND BSTAT IN ( ' ' , 'A' ) " ' ' - Normal document, A - Parked doc
AND BLART = P_BLART
AND CPUDT IN SO_CPUDT " Selection screen input.
IF NOT T_BKPF[] IS INITIAL.
SELECT BUKRS BELNR GJAHR BUZEI EBELN AUGBL AUGBT
INTO TABLE T_BSEG
FOR ALL ENTRIES IN T_BKPF
WHERE BUKRS = T_BKPF-BUKRS
AND BELNR = T_BKPF-BELNR
AND GJAHR = T_BKPF-GJAHR
AND EBELN IN SO_EBELN " selection-screen input
ENDIF.
LOOP AT T_BKPF.
Parked
IF T_BKPF-BSTAT = 'A'.
    WRITE: / T_BKPF-BELNR , ' - Parked'.
process the next record.
    CONTINUE.
ENDIF.
Check for Open / Closed.
LOOP AT T_BSEG WHERE BELNR = T_BKPF-BELNR
                               AND      BUKRS = T_BKPF-BUKRS
                               AND      GJAHR = T_BKPF-GJAHR
                               AND      AUGBL <> ' '.
    EXIT.
ENDLOOP.
If the return code is 0 then the document is cleared..
IF sy-subrc = 0.
    WRITE: / T_BKPF-BELNR , ' - Closed'.
Else the document is not cleared.
ELSE.
    WRITE: / T_BKPF-BELNR , ' - Open'.
ENDIF.
ENDLOOP.
Thanks,
Naren

Open and closing balances std report

Dear All,
please suggest me open and closing balances std report and can i suggest my user below t.code for viewing open and closing balnces for India scenarion T.code:J3RFLVMOBVED
Regards
Gopal.S

hi
kindly chk MB5B it will fullfill your requirement
regards
praveen.k

Service Requests Open 5 days?/Service Requests Open and Closed Today

Help!
How would I determine service requests open greater then 5 days, I use the # of Open SR's but cannot seem to get a date to work.
Also what is the best way to count the SR's open and closed on the same day?
Thanks in advance.

You need to include a TIMESTAMPDIFF function in your filter... something to the effect of
TIMESTAMPDIFF(SQL_TSI_DAY,"Service Request"."Create Date",CURRENT_DATE) > 5
Double check the column reference.
Mike L

Open and Closed network access?

Similar Messages

Maybe you are looking for