Open and Resize EPS File
Hy Memebrs
i'm new in this forum and i have a question about the EPS file.
I search via google how to open EPS in Photo.. Elements 12, becuase I got allways a Error Message. I found a really good Tutorial, about this problem and did it step by step:
open as... choose picture(eps)... chose OPEN AS -TIFF...
Now I can edit the picture.
I resize the picture to more than 10000px. After this work the picture looked like ... unsharp.... I saw the pixel and I thounght that was the side-effect of the resize.
I was by a friend, who has the photoshop cs6 software(Stundent...) yesterday. I took the same eps file and opened it in his version. The result is unthinkable...
The picture looked very great. I didn't see andy pixel. It looked sharp. Whats the reason for this difference?
I could resize the picture like a skyscraper and it looks alway very great.
What did i wrong?
Sorry for my english
Thank for Help
You didn't do anything wrong.
The workaround you used only opens the very low resolution tiff preview of the eps file and it's at most 8 bits or less than 3 bits/channel.
(a normal eps file is 24 bits or 8 bits/channel)
Photoshop cs6 opens the real eps file and that's why it looks so much better.
Adobe removed the ability for photoshop elements 11 and 12 to open eps files.
Older versions of photoshop elements will open eps files.
Similar Messages
-
Open with command - EPS file confusion.
I recieved a folder of Illustrator vector eps files that seemed to want to open in Photoshop by default. I changed all in Finder to 'open with' Illustrator CS.
Now my Photoshop files try to open in Illustrator too. So I change all to open in Photoshop and am back to square one with vectors opening there by default too.
Is there a way to set Illustrator EPS to open in Illustrator and Photoshop EPS to open in Photoshop? I know I can just drag them onto the relevant icon but if I double click a Photoshop EPS I have to force out of Illustrator to stop it opening.
Who's bright idea it was to give two distinctly different file formats the same extension anyway?I think the underlying cause of the problem is the change Apple has made in how Launch Services is identifying these files in Tiger.
An Illustrator EPS file has a creator code of 'ART5', a file type of 'EPSF', and a filename extension of ".eps". A Photoshop EPS file has a creator code of '8BIM', a file type of 'EPSF' (same as an Illy EPS), and a filename extension of ".eps" (again, same as an Illy EPS).
Prior to OS X 10.4, Launch Services would consider an Illustrator EPS file to be different from a Photoshop EPS file because of the different creator codes on the file. (While we know that they are "different" based on the type of data they contain (i.e. vector vs. raster), Launch Services doesn't really know anything about the content of the files; it only looks at the file properties to make its decisions). Since they were different, you could choose to have one open in Illustrator and the other open in Photoshop. So, just by default, Photoshop EPS files would open in Photoshop and Illustrator EPS files would open in Illustrator.
In OS X 10.4, Apple changed some things around. Prior to 10.4, a combination of a file's creator code, file type, and filename extension were mapped to a particular application that would open it. In 10.4, the file's creator code, file type, and filename extension aren't mapped directly to an application, but to an intermediary called a "Uniform Type Identifier" (UTI). It's the UTI then that is mapped to an application that will open it. The UTI for an EPS file is the string "com.adobe.encapsulated- postscript". Launch Services doesn't really distinguish between an Illustrator "com.adobe.encapsulated-postscript" file or a Photoshop "com.adobe.encapsulated-postscript" file. So, what happens is that both an Illustrator EPS file (creator code 'ART5', file type 'EPSF', filename extension ".eps") and a Photoshop EPS file (creator code '8BIM', file type 'EPSF', filename extension ".eps") are mapped to the same UTI type, "com.adobe.encapsulated- postscript", which itself can be globally mapped to only one application. In other words, globally either Illustrator or Photoshop, but not both.
While not ideal, files do support a per-file preference setting. So if you have a global setting to open eps files in Illustrator then by default double-clicking on will, well, open them in Illustrator. If you have a Photoshop EPS file and would like to open it in Photoshop, you could use the Get Info window to choose Photoshop instead -- just don't click the Change All button. That file, from then on, should always open in Photoshop when you double click on it. (That "user override" preference is saved in the resource fork of the file so it should stay with it).
The switch to UTIs has helped simplify things quite a bit, such as this example with the different types of PDF files. Prior to OS X 10.4, you'd have to repeat the custom "Open With" preference for each type of PDF, which was confusing for most users.
Technically, both Illustrator EPS files and Photoshop EPS files contain the same type of information: Encapsulated PostScript; the fact that Adobe provides two applications, one to edit image-based EPS files, and a second to edit vector-based EPS files is somewhat beside the point. While you could send feedback to Apple about this, I think it's probably up to Adobe to figure something out. They could quite easily define Illustrator EPS and Photoshop EPS files as subclasses of "com.adobe.encapsulated-postscript". For example, vector-based Illustrator EPS files might be "com.adobe.encapsulated-postscript.vector" that conform to "com.adobe.encapsulated-postscript", while raster-based Photoshop EPS files might be "com.adobe.encapsulated-postscript.raster" that conform to "com.adobe.encapsulated-postscript". Since there'd be two distinct types, they could each be mapped to their own application.
Hope this helps....
Dual 2.7GHz PowerPC G5 w/ 2.5 GB RAM; 17" MacBook Pro w/ 2 GB RAM - Mac OS X (10.4.6) -
How to open and read binary files?
How do I open and read Binary files?
Did you look on The Unarchiver's web site where it has a link to older versions? http://theunarchiver.googlecode.com/files/TheUnarchiver3.2_legacy.zip
The best thing to do is ask your friends what programs they used to produce these files, or at least what format files they are producing. Otherwise it's like being shown a car and given a bundle of 200 keys with no idea to which one to use, or even if any of them work with that car.
Using The Unarchiver will likely not do anything because it too will not know what format files are involved, and they may not even been in an archived format. If they sent you a Word file without telling you (a favorite of Windows users to do -- it drives me crazy when they could have just sent them in plain text), The Unarchiver won't open them. If it's a picture file then using Hexedit will just show you a bunch of unintelligible stuff as shown in an earlier post, though you may see a line of text providing a hint.
As I said earlier, often .bin may be an executable program which needs another program to actually interpret it. That's what Java is trying to do. Still, it may think it can execute the file, but it is highly unlikely somebody would send you an executable program (and if they did I would not trust it). For all you know it may be a Windows virus. -
Hi All,
I need code of How to open and save excel file in local system in Oracle forms.
With Regards,
Chandra ShekharHello Chandra,
Webutil can be used to achieve this functionality.
STEPS TO FOLLOW
================
1. Install and configure Webutil following instructions in the webutil manual
and the readme file.
2. Create a form with a block Eg. DEPT
3. Create a button, and in that button put the following code -
DECLARE
application Client_OLE2.Obj_Type;
workbooks Client_OLE2.Obj_Type;
workbook Client_OLE2.Obj_Type;
worksheets Client_OLE2.Obj_Type;
worksheet Client_OLE2.Obj_Type;
args Client_OLE2.List_Type;
cell ole2.Obj_Type;
j INTEGER;
k INTEGER;
BEGIN
application := Client_OLE2.create_obj('Excel.Application');
workbooks := Client_OLE2.Get_Obj_Property(application, 'Workbooks');
workbook := Client_OLE2.Invoke_Obj(workbooks, 'Add');
worksheets := Client_OLE2.Get_Obj_Property(workbook, 'Worksheets');
worksheet := Client_OLE2.Invoke_Obj(worksheets, 'Add');
go_block('dept');
first_record;
j:=1;
k:=1;
while :system.last_record = 'FALSE'
loop
for k in 1..3 /* DEPT has 3 columns */
loop
If not name_in(:system.cursor_item) is NULL Then
args:=Client_OLE2.create_arglist;
Client_OLE2.add_arg(args, j);
Client_OLE2.add_arg(args, k);
cell:=Client_OLE2.get_obj_property(worksheet, 'Cells', args);
Client_OLE2.destroy_arglist(args);
Client_OLE2.set_property(cell, 'Value', name_in(:system.cursor_item));
Client_OLE2.release_obj(cell);
End If;
next_item;
end loop;
j:=j+1;
next_record;
end loop;
/* For the last record */
for k in 1..3
loop
If not name_in(:system.cursor_item) is NULL Then
args:=Client_OLE2.create_arglist;
Client_OLE2.add_arg(args, j);
Client_OLE2.add_arg(args, k);
cell:=Client_OLE2.get_obj_property(worksheet, 'Cells', args);
Client_OLE2.destroy_arglist(args);
Client_OLE2.set_property(cell, 'Value', name_in(:system.cursor_item));
Client_OLE2.release_obj(cell);
End If;
next_item;
end loop;
Client_OLE2.Release_Obj(worksheet);
Client_OLE2.Release_Obj(worksheets);
/* Save the Excel file created */
args := Client_OLE2.Create_Arglist;
Client_OLE2.Add_Arg(args,'d:\test.xls');
Client_OLE2.Invoke(workbook, 'SaveAs', args);
Client_OLE2.Destroy_Arglist(args);
/* release workbook */
Client_OLE2.Release_Obj(workbook);
Client_OLE2.Release_Obj(workbooks);
/* Release application */
Client_OLE2.Invoke(application, 'Quit');
Client_OLE2.Release_Obj(application);
END;
4. Save the form and compile it.
5. Run the form.
6. Execute the query in the block.
7. Click on the button.
8. An excel file will be created in the d:\ directory by the name test.xls.
Kind regards,
Alex
If someone's answer is helpful or correct please mark it accordingly. -
Open and print multiple files from the Finder all at once.
I'm trying to research how to do this. In OS9 you used to be able to hi-lite multiple files (Word files for example) and just hit Command+P. This would automatically open all of the files AND print them.
I can't seem to do this in my OS X. Or can I? I can hi-lite and go to File/Print, but the computer is only opening but not printing.
Any suggestions??
iMac Mac OS X (10.4.8)I don't know how to both "open and print" multiple files in one step. The ⌘O combination of course will open multiple items. The items remain selected so switching back to the "Finder" and dragging multiple icons onto the icon for "/Applications" > "Utilities" > "Printer Setup Utility.app" seems to cause them all to be printed to the default printer.
Alternatively, a user's "~/Library/Printers" folder contains printer icons -- I'm not sure what they are exactly, but they represent the printers set up for that account. They function pretty much like the pre-OS X "Desktop Printer" icons so dragging and dropping multiple files onto them should cause them to be printed. It may even be possible to create aliases to them on the "Desktop" to recreate "Desktop Printer" functionality. But again, this won't open the files into their applications. -
Open And Edit Word File In SharePoint Site Programmatically (Without Save On Local system)
Hi Sir ,
I am working as sharepoint developer. I have face some problem in Edit and open document file in sharepoint site programmatically. I want to open file and edit directly in sahrepoint site without save in local system,
Issue: I have upload one doc file then try to edit and open but In that case file is dowanload and save in local save.Hello,
As i understand you want to open and update word file. Please have a look at below links:
http://mysharepointwork.blogspot.ca/2010/06/programmatically-open-and-save.html
http://howtosharepoint.blogspot.ca/2010/05/programmatically-edit-and-save-file.html
It is good place to start.
Hemendra:Yesterday is just a memory,Tomorrow we may never see
Please remember to mark the replies as answers if they help and unmark them if they provide no help -
How do I configure DW to open and load a file?
I have DreamWeaver CS5 running on a Mac. Whenever I double-click to open a DreamWeaver compatible file (such as an HTML file), if DW is not already open, DW launches but does not load the file. Once DW is launced, I can double-click the file and it will load. How do I configure DW to open and load a file together?
DW: v11 b 4993
OS X: 10.7.4 (11E53)HTML files are normally configured to open in a browser. The default on a Mac is to open the file in Safari.
You can right-click the filename in the Mac Finder, and select Open With > Dreamweaver CS5 from the context menu.
Alternatively, select an HTML file in Mac Finder, and press Cmd+I to open the Info panel. In the Open With section, select Dreamweaver CS5 as the default program, and click the Change All button. -
Why can't I open and retrieve my files from iPhoto and my Address Book after importing the files from my Power Mac G5 to my new Mac Pro? I get a warning that says the new OS on my Pro doesn't open files from a Power Mac. Any idea how I can fix this?
For your addressbook, export the files to vCard on the PowerMac, then bring them over to your Mac Pro. For your iPhoto, copy the Users -> yourname -> Pictures folder to your Desktop on the Mac Pro, and open iPhoto on the Mac Pro holding the command and option keys. Select the library file from that Pictures folder and open it. It should import all the pictures into iPhoto as part of the rebuild process. Other PowerPC to Intel migration issues are covered here: https://discussions.apple.com/docs/DOC-2295
-
Outlook 2013 are not opening and showing pst files are not closed properly
Hi
Outlook 2007 has stopped working and showing close the program. Again,we re-started then outlook 2007 and it has opened and taken the backup of pst files in a separate hard drive.
The pst file was repaired in scanpst.exe and again i have tried to put the pst file back in outlook 2007.It was hanging and suddenly i have uninstalled 2007 and started installing outlook 2013.
2013 applications like word,excel,power point are opening and outlook 2013 are not able to open and showing pst files were not closed properly.
Again i have un-installed and re-installed the outlook 2013.still we are not able to open the outlook.
Need your support at the earliest to fix the issue.
ThanksHi,
What's the .pst file used for? Archive? Or you set up a POP3 account and want to import the emails from the .pst file?
Another question, you mentioned you installed Outlook 2013 and it didn't open either. Was this from the beginning right after you installed Outlook 2013, or after you did something such as create a new Profile, set up a new account and tried to import the
.pst file?
Kindly answer my questions so I can understand the situation better.
I've seen some of this issue caused by the anti-malware software, check your anti-malware software to see if it's trying to interfere with Outlook - things like real time email checking can sometimes cause these kinds of problems. To troubleshoot, we can
simply disable the anti-malware software temporarily to see the result.
Regards,
Melon Chen
TechNet Community Support -
How can I open and print PDF files?
How can I open and print PDF files?
With the free Reader if they are not print protected. With Acrobat otherwise.
-
Opening and editing .pub files
Can anybody tell me if there is any way to open and edit .pub files without converting them into PDF's???
Hi, not that I can find, but besides PDF, perhaps as MS .doc using this method?
http://www.maketecheasier.com/open-mark-up-pub-file-on-mac/2011/04/11 -
Can you use PDF Pack to open and read PDF files?
Can you use PDF Pack to open and read PDF files?
Hi Keith,
PDF Pack is a conversion tool which would convert PDF to different formats and vice versa. It cannot be used for reading PDFs.
If you want to open and read PDF file you can use Adobe Reader.
You can download Adobe Reader from below mentioned link.
Adobe Reader
let me know if you have any other questions.
Regards,
~Pranav -
Which lib to open and view office file on browser
Hi all,
when I receive a stream of file from server. How I can open and view this file on browser?
My suggest: catch a stream and use library to open office file on browser, but I don't know which lib to do this.
ThanksI'm confused, you're coding for the server-side, with JSP/servlets aren't you? So how can you intercept the stream at the browser? That'll be beyond your code.
And anyway, if you set the MIME types and set the content for the response, the browser itself will decide and prompt the user for handling the file.
If on the other hand, you want to open a file on the server and send the contents of that to the browser, you can look into Apache POI (http://poi.apache.org/) for handling Excel, Word and PowerPoint documents. -
Trying to modify SaveDocsAsSVG to open and save all files within a directory automatically
I am trying to do as the title suggests, but I can't find a way to specify the folder I want the script to look at and I can't get it to open/save/close the files without user interaction. Another way to say it is that I need this to be itterative as the PC I'm using cannot handle too many open files at once.
On a side note, I can't even find the documentation. Example, what arguments does Folder.selectDialog() accept? Where is the documentation for that?
Thank peeps!
Using CS6 trying to convert EPS to SVGHere is what I have so far. I think I'm close I just need to figure out how to open the documents in the app and close them after converting them so only one document is open at a time. My goal is to run this program over night since there are thousands of files to convert. Thank you all for your help!
app.userInteractionLevel = UserInteractionLevel.DONTDISPLAYALERTS;
try {
if (app.documents.length > 0 ) {
// Get the folder to save the files into
var inFolder = Folder( Folder.desktop + '/temp' )
var files = inFolder.getFiles( /\.eps$/i );
var destFolder = null;
destFolder = '~/Desktop/temp';
if (destFolder != null) {
var options, i, sourceDoc, targetFile;
// Get the SVG options to be used.
options = this.getOptions();
// You can tune these by changing the code in the getOptions() function.
for ( i = 0; i < files.length; i++ ) {
//THIS IS WHAT I NEED HELP WITH
var docRef = open(files[i]);
sourceDoc = app.documents[i]; // returns the document object
// Get the file to save the document as svg into
targetFile = this.getTargetFile(sourceDoc.name, '.svg', destFolder);
// Save as SVG
sourceDoc.exportFile(targetFile, ExportType.SVG, options);
// Note: the doc.exportFile function for SVG is actually a Save As
// operation rather than an Export, that is, the document's name
// in Illustrator will change to the result of this call.
alert( 'Documents saved as SVG' );
else{
throw new Error('There are no document open!');
catch(e) {
alert( e.message, "Script Alert", true);
/** Returns the options to be used for the generated files.
@return ExportOptionsSVG object
function getOptions()
// Create the required options object
var options = new ExportOptionsSVG();
// See ExportOptionsSVG in the JavaScript Reference for available options
// Set the options you want below:
// For example, uncomment to set the compatibility of the generated svg to SVG Tiny 1.1
// options.DTD = SVGDTDVersion.SVGTINY1_1;
// For example, uncomment to embed raster images
// options.embedRasterImages = true;
return options;
/** Returns the file to save or export the document into.
@param docName the name of the document
@param ext the extension the file extension to be applied
@param destFolder the output folder
@return File object
function getTargetFile(docName, ext, destFolder) {
var newName = "";
// if name has no dot (and hence no extension),
// just append the extension
if (docName.indexOf('.') < 0) {
newName = docName + ext;
} else {
var dot = docName.lastIndexOf('.');
newName += docName.substring(0, dot);
newName += ext;
// Create the file object to save to
var myFile = new File( destFolder + '/' + newName );
// Preflight access rights
if (myFile.open("w")) {
myFile.close();
else {
throw new Error('Access is denied');
return myFile; -
I wish to open and then convert a pdf or eps or ps file in Labview , and then convert to say TIFF so i can manipulate it in my application. Are there any vi's or methods whereby I can open and work with PDF files from Labview ? I have the IMAQ vision toolkit , which has support for reading/writing Jpeg ,Tiff ,Bmp , etc. Just not
PDF. ThanksBig K wrote in message news:<[email protected]>...
> I wish to open and then convert a pdf or eps or ps file in Labview ,
> and then convert to say TIFF so i can manipulate it in my application.
> Are there any vi's or methods whereby I can open and work with PDF
> files from Labview ? I have the IMAQ vision toolkit , which has
> support for reading/writing Jpeg ,Tiff ,Bmp , etc. Just not
> PDF. Thanks
You can get A converter that will convert between PDF, EPS, and PS
file formats. It works on a Windows, Mac, or LINUX/UNIX box, and is
called AFPL Ghostscript. You can dowload it for free at
http://www.cs.wisc.edu/~ghost/
The site also has a large amount of documentation on using it,(as well
as a free viewer) b
ut I haven't had a lot of time to experiment with
it.
Maybe you are looking for
-
How to get the window.opener object into a model window
Hi, I m opening a new popup window with the help of window.showModalDialog(url,self,''). Now i want to access the opner window inside this popup window. Since this showModalDialog does not support window.opener so i passed 'self' as parameter and if
-
Hi All I am working on RFC to SOAP Scenorio. The requirement is RFC will make a querry and all the vendor details will be received in the return table structure of the RFC Function module. There will be multiple entries in the Return table. I am gett
-
Problems running jsp files with tags on tomcat 4.0
hi, i had some jsp1.1 stuff running on tomcat3.3. last week i moved to tomcat 4.0 , changed the tags to fit jsp1.2 and... everything is wrong now. while trying to run jsp with tags i get an error message (same for all files): ----> description The se
-
I am having trouble with some of my previously installed software before installing the New Lion OS. I just found this evening that my Canon 4400F Scanner will no longer work with the new OS. I need to know if there is a solution for this short of bu
-
Change Cell Color of JTable-Please Help
Hi All, I want to change the color of a Row in a JTable when i click on it. And After that when i click another row i want to retain this color and give another color to the second row. If somebody knows how to do this. Do Help Thanks in advance -Jee