Open and run the VI using FP.Open from another VI

I would like to have LabVIEW open and run the VI when I open the second VI (number 2) from VI (number 1). I set the appropriate Execution options in File»VI Properties
to make both VI run when opened but it works only for the first vi and
when I open 2.vi from another 1.vi the second vi will open but not
run.Would u plz let me know how can I make the second vi run when I open it using FP.Open.
Attachments:
111112w.jpg ‏33 KB

There are several ways to start VI 2.
- use a invoke node of VI 2 which says : "run when opened"
- edit the VI properties of VI2 en set "run when opened" to TRUE
See attachment
Kind regards,
- Bjorn -
Have fun using LabVIEW... and if you like my answer, please pay me back in Kudo's
LabVIEW 5.1 - LabVIEW 2012
Attachments:
RunWhenOpened.PNG ‏33 KB

Similar Messages

HT4914 Can I store music in the cloud using iTunes Match from another computer with a different Apple ID?

Any advice would be appreciated. Thanks

You can't transfer music (nor any other content) from one account to another account, it will remain tied to the account that downloaded it. Also home sharing only works from a computer to a device (or to another computer), it doesn't work between iOS devices.
Depending upon what country that you are in (music can't be redownloaded in all countries) then he could potentially log into your account on his iPod (I assume that it's an iPod Touch) and redownload his music on it, but that might tie his iPod to your account for 90 days : iTunes Store: Associating a device or computer to your Apple ID.

How can i access all the objects of one schema from another schema

Dear All,
How can i access all the objects(Tables,Views,Triggers,Procedures,Functions,Packages etc..) and do the modifications of one schema from another schema (Without using synonyms concept).
Thanks in advance,
Mahi

First of all, synonyms only help you easy reference the object. It doesn't have any implication of object privilege.
As long as you have proper privilege on target object. You can access it with or without synonyms.
Assuming you have proper privilege of objects, you can use following command to assume schema owner.
ALTER SESSION SET CURRENT_SCHEMA = Schema_owner

My iMac does not connect to internet via wireless after I log in. I have to open network preferences and run the assistant everytime to make it work. Its a new system, updated to Mountain Lion,.

My iMac does not connect to internet via wireless after I log in. I have to open network preferences and run the assistant everytime to make it work. Its a new system, updated to Mountain Lion,.

Hi, this has worked for a few...
Make a New Location, Using network locations in Mac OS X ...
http://support.apple.com/kb/HT2712
10.7…
System Preferences>Network, top of window>Locations>Edit Locations, little plus icon, give it a name.
10.5.x/10.6.x/10.7.x instructions...
System Preferences>Network, click on the little gear at the bottom next to the + & - icons, (unlock lock first if locked), choose Set Service Order.
The interface that connects to the Internet should be dragged to the top of the list.
Instead of joining your Network from the list, click the WiFi icon at the top, and click join other network. Fill in everything as needed.
For 10.5/10.6, System Preferences>Network, unlock the lock if need be, highlight the Interface you use to connect to Internet, click on the advanced button, click on the DNS tab, click on the little plus icon, then add these numbers...
208.67.222.222
208.67.220.220
Click OK.
Also, turn off IPv6:
System Preferences » Network » AirPort » TCP/IP tab » Configure IPv6
Or whatever Interface you use.

I've downloaded CS6 Master Collection but only see The Photoshop icon. I can't seem to find the other programs, except on "uninstall programs" How do I open and run the others?

I've downloaded CS6 Master Collection but only see The Photoshop icon. I can't seem to find the other programs, except on "uninstall programs" How do I open and run the others?

How about you give us some real information.
Did you install the software? What operating system?

HT2240 I have installed quicktime 7 on my max OS X machine, and I have bought QT 7 pro for OS X. I open Qt7 and enter the registration code I got from buying QT 7 pro, the icon changes to pro, but nothing happens and it doesn't appear to upgrade. help

I have installed quicktime 7 on my max OS X machine, and I have bought QT 7 pro for OS X. I open Qt7 and enter the registration code I got from buying QT 7 pro, the icon changes to pro, but nothing happens and it doesn't appear to upgrade. help

I have installed quicktime 7 on my max OS X machine, and I have bought QT 7 pro for OS X. I open Qt7 and enter the registration code I got from buying QT 7 pro, the icon changes to pro, but nothing happens and it doesn't appear to upgrade.
And just what sort of changes in "appearance" did you expect?
If you can access the editing, conversion, and/or properties options once a file is loaded then the QT 7 app has been upgreaded for "Pro" use.

Just downloaded and installed new LR CC. No apparent problems with the D/I on my iMac, OS 10.10.3. however LR CC will not start. I get a momentary flash of the opening screen and then the program shuts down. From the posts it looks like this if a ver

Just downloaded and installed new LR CC. No apparent problems with the D/I on my iMac, OS 10.10.3. however LR CC will not start. I get a momentary flash of the opening screen and then the program shuts down. From the posts it looks like this if a very common problem. Any help would be appreciated. Thanks.

Have you tried logging out of your CC desktop app, then logging back in again? Quit/Restart won't work, but logging out and back in should. See here: https://helpx.adobe.com/creative-cloud/kb/sign-in-out-creative-cloud-desktop-app.html

HT1461 Win 7 set up and running OK,but after go back from OSX the wireless net work stuck at identification cause the window working without Internet.Can we fix it or I must use Windows off line all the time? I already contact Microsoft 2 times for activa

Win 7 set up and running OK,but after go back from OSX the wireless net work stuck at identification cause the window working without Internet.Can we fix it or I must use Windows off line all the time?
I already contact Microsoft 2 times for activations.Hope I can fix from Apple instead.

Ok....Got "Problem 2 and 4" solved....still trying to figure out this pop up everytime I click something...it's crazy how fast the pop up blinks...maybe once or 3 blinks then nothing till you close the window, then pop up then disappears...then click something
else and pop up then gone....never seen this before...ive seen it when you tried to get online which turned out to be a virus on a customers cpu I worked on some years ago, I think it has something to do with the deleted files that I spoke of on last
post...I notice it does it on start up as well.....think something is trying to install but not sure. Need to figure out where the appdata or start up folder and see whats in there....maybe it's in there.......so I might wait to see how it acts in the next
couple days for "Problem 1"...but other than that it's running like a champ...so right now I just want to get the pop up windows to stop........thx again for everyone's help on this.
John

Set env using a script and run the command (dependency on the env)

I need to set the env varaible by running a shell script with arguments as 'ksh setEnviron r6.1' and then run the command in the
same process. the command has dependency on the previous script which sets the env variables.
With Runtime.getRuntime().exec( cmd1); ,Runtime.getRuntime().exec( cmd2); I am not able to execute the Cmd2 as it is running in different process.
How do solve this issue.
Is there any other method to run the command to set env variables and run the second command.(dependent on the env) to get the output.
Please help me out in this.

ganesh_mak wrote:
final String[] commands = {
                          ". setEnviron r6.1",
                            "/usr/add-on/test/Xbin/sql name from list where date.eq.05/22/08",
Process penv = Runtime.getRuntime().exec("/bin/sh");
BufferedReader br = new BufferedReader( new InputStreamReader( penv.getInputStream() ) );
BufferedReader stdError = new BufferedReader(new InputStreamReader(penv.getErrorStream()));
final OutputStream writer = penv.getOutputStream();
for (int i=0; i<commands.length;i++)
     writer.write(commands.getBytes("utf-8"));
     writer.write("\n".getBytes());
String line;
while((line = br.readLine())!=null){
System.out.println(line);
br.close();
writer.close();
I tried the above code but its not working...............
please correct me.
Do you think I used the '-i' argument just for fun? Did you do a 'man sh' and 'man bash' to see what the arguments do? If not then do it now.
Do you think I used Theads to process stderr and stdout just for fun? I've shown you the basic approach. I have shown you how you need to create Threads to process stdout and stderr. If you have not understood and you have not studied http://www.javaworld.com/javaworld/jw-12-2000/jw-1229-traps.html then do so now.
Edited by: sabre150 on Jun 2, 2008 3:43 PM

Getting error while running the Interface using AGENT

Hi All,
i am not able to run the interface using Agent service which running in the another machine, while running i am getting error message like
java.lang.Exception: Error during Session launching
     at com.sunopsis.dwg.dbobj.SnpSession.remoteExecute(SnpSession.java)
     at com.sunopsis.graphical.l.or.e(or.java)
     at com.sunopsis.graphical.r.z.actionPerformed(z.java)
     at javax.swing.AbstractButton.fireActionPerformed(Unknown Source)
     at javax.swing.AbstractButton$ForwardActionEvents.actionPerformed(Unknown Source)
     at javax.swing.DefaultButtonModel.fireActionPerformed(Unknown Source)
     at javax.swing.DefaultButtonModel.setPressed(Unknown Source)
i ran the Agent services in Comment prompt, there i am getting the error like follows
java.lang.NullPointerException
at com.sunopsis.dwg.cmd.DwgCommandSession.treatCommand(DwgCommandSession.java)
at com.sunopsis.dwg.cmd.DwgCommandBase.prepare(DwgCommandBase.java)
at com.sunopsis.dwg.cmd.e.t(e.java)
at com.sunopsis.dwg.cmd.h.y(h.java)
at com.sunopsis.dwg.cmd.e.run(e.java)
at java.lang.Thread.run(Unknown Source)
here i have mentioned the steps which i followed for creating agent service.
i have two machine namely A and B both having the ODI
i am going to use the B machine as a centralized server. so i edited the odiparams.bat file in B machine in ODI locaiton and filled the repository information
from A machine i opened the Topology and created the Agent service there i mentioned the HOST name as "B" and port number 20300. and i configure the logical agent aswell
from B machine i started the Agent service like agentscheduler "-port=20300".
Agent service launched seccessfully.
From A machine i tested the Agent. that also shown the successful window message.
then i started running the interface using the agent i am getting the error which i have mention in the beginging.
Interface which i ran will do the text file to table loading, so i kept that file in particular location in B machine( i have configure this location when i created the file data store in topology in A machine).
Please help me to solve the problem...
thanks
nidhi
Edited by: knidhi on Nov 26, 2009 6:54 PM

Thanks For your Reply,
I ran the agent as you said. here is my observation
from the Machine B where agent is actually running, i could able to run the interface using agent service.
but from the machine A while running the interface i am getting the following error message
java.lang.Exception: Error during Session launching : Error during Session Preparation : You are trying to execute a session with an agent that is undefined in your repository. Please check the agent -NAME parameter.
     at com.sunopsis.dwg.dbobj.SnpSession.remoteExecute(SnpSession.java)
     at com.sunopsis.graphical.l.or.e(or.java)
     at com.sunopsis.graphical.r.z.actionPerformed(z.java)
     at javax.swing.AbstractButton.fireActionPerformed(Unknown Source)
     at javax.swing.AbstractButton$ForwardActionEvents.actionPerformed(Unknown Source)
     at javax.swing.DefaultButtonModel.fireActionPerformed(Unknown Source)
     at javax.swing.DefaultButtonModel.setPressed(Unknown Source)
     at javax.swing.AbstractButton.doClick(Unknown Source)
     at javax.swing.plaf.basic.BasicMenuItemUI.doClick(Unknown Source)
     at javax.swing.plaf.basic.BasicMenuItemUI$MouseInputHandler.mouseReleased(Unknown Source)
     at java.awt.Component.processMouseEvent(Unknown Source)
     at java.awt.Component.processEvent(Unknown Source)
     at java.awt.Container.processEvent(Unknown Source)
     at java.awt.Component.dispatchEventImpl(Unknown Source)
     at java.awt.Container.dispatchEventImpl(Unknown Source)
     at java.awt.Component.dispatchEvent(Unknown Source)
     at java.awt.LightweightDispatcher.retargetMouseEvent(Unknown Source)
     at java.awt.LightweightDispatcher.processMouseEvent(Unknown Source)
     at java.awt.LightweightDispatcher.dispatchEvent(Unknown Source)
     at java.awt.Container.dispatchEventImpl(Unknown Source)
     at java.awt.Window.dispatchEventImpl(Unknown Source)
     at java.awt.Component.dispatchEvent(Unknown Source)
     at java.awt.EventQueue.dispatchEvent(Unknown Source)
     at java.awt.EventDispatchThread.pumpOneEventForHierarchy(Unknown Source)
     at java.awt.EventDispatchThread.pumpEventsForHierarchy(Unknown Source)
     at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
     at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
     at java.awt.EventDispatchThread.run(Unknown Source)
i have created both physical and logical agent with the same name "DEMO_AGENT", and i ran the agent in the Machine B like
agentscheduler "-port=20301" "-name=DEMO_AGENT"
Please help me to solvethe issue...
Thanks
Nidhi
Edited by: knidhi on Nov 27, 2009 11:04 AM
Edited by: knidhi on Nov 27, 2009 11:04 AM
Edited by: knidhi on Nov 27, 2009 11:05 AM

I can't uninstall Firefox(3.6.3) either through the control panel or by going to Program files/Mozilla Firefox/Uninstall and running the helper.exe, I have Windows 7 Home Premium(64bit)

I simply want to uninstall Mozilla FireFox 3.6.3. I tried both recommendations of using the control panel to add/remove program and running the helper.exe in Program Files/Mozilla FireFox/uninstall. I am running Windows 7 Home Premium Edition(64bit). When I tried to remove it using the add/remove program and helper.exe all it does is start for a split second(mouse pointer turns into circular loading icon) and then it stops.
== User Agent ==
Mozilla/5.0 (Windows; U; Windows NT 6.1; en-US) AppleWebKit/531.22.7 (KHTML, like Gecko) Version/4.0.5 Safari/531.22.7

Hi Guys,
I had this same problem too, and i want to share to all of you my own fix for this kind of problem;
(READ FIRST: ''This step will wipeout everything that mozilla saved on your computer including : password, history and bookmarks''.)'''
'''1. download the Revo Uninstaller''''''
- quick step guide for this:
select mozilla firefox, don't forget to uninstall everything that relates to mozilla including registry to clean them all up.
'''2. download mozilla firefox again'''
- AND REINSTALL. however on this stage, in some cases mozilla will not open at this stage.
'''3. Uninstall Mozilla firefox again NOW using control panel.'''
'''4. Restart the computer to refresh everything.'''
'''5. Reinstall mozilla firefox again, once you have received the prompt for "exporting or importing etc.. etc.. from Microsoft" that means its already working.. it will take around 5-10 sec to load up (in my case) .'''

HT4623 I am using iphone GS3 and jailbreak the iOS using 5.0.1 can I download and install iOS5.1.1

I am using iphone GS3 and jailbreak the iOS using 5.0.1 can I download and install iOS5.1.1

Per Terms of Use to which you agreed when you joined this
forum, discussion of jailbroken iPhones is prohibited. You will
get no help here.
Be advised the jailbreak made unknown alterations to the iPhone
which will prevent future upgrades, open up the OS to malware,
and may result in it becoming useless - a brick, if you will.

Problem with checkbox and run the get button event continuously

Hi all,
I have a checkbox list of 3 sensors. I have used the X-Control (for checkbox) found in the following link for my application https://decibel.ni.com/content/docs/DOC-30558. I have problems to achieve the following.
Suppose i check Vibration and Strain, I should be able to display both Vibration and Strain data. (I should compare each element of 1d array with the string constant and run the case structure).
I have to run the GET event continuously to display the data.
I have attached the code to the post.
Please can anyone suggest how to go about this.
thanks in advance
Regards,
KM
Attachments:
Main page Enhancements for Create and Load.vi ‏69 KB

Hi Bob_Schor,
I tried using the approach you mentioned. I cant run continuously. I am not able to figure out where i am going wrong. I have attached the updated vi.
Hi Hooovahh,
The link you have posted seem to work with LV2013. I am currently using LV 2011. Can you please update it to 2011. Is OpenG necessary for this?
Regards,
KM
Attachments:
Main page Enhancements for Create and Load.vi ‏77 KB

Anyone have experience installing and running the Condor Engineer QPC-1553 PXI board

Do anyone know how to installing and running the Condor Engineer QPC-1553 PXI board using their LabVIEW drivers?

Hi CEY,
as far as i know there are many documents with it. Install it like every other hardware. To test it there is a program from Condor Engineer. To build your application, there are good example for BC, BM and RT.
Mike
Message Edited by MikeS81 on 02-19-2008 09:27 AM

How to run the program using specific classpath

Recently I installed Javamail 1.2 and JAF1.0.1 on my NT Box and set up the classpath. I can compile my java email code by using: javac myEmail.java. But when I tried to run the code using java myEmail, it always gives the error: Exception in thread "main" java.lang.NoClassDefFoundError: myEmail.
when I use -verbose and found that it always goes to:
C:\Program Files\JavaSoft\JRE\1.3.1\lib\rt.jar to find classes even I use -cp option to point Javamail\mail.jar and activation.jar.
what is wrong with it? Thank you in advance!!!!!!

What does this have to do with JMS. I suggest that this should have been posted to the Java Programming forum where you would have gotten a quick response as this is a simple problem to diagnose.
The problem is that the class myEmail, which you created, is not on the class path so it cannot find it. It has nothing to do with the location of mail.jar and activation.jar, although this may cause problems later.
What you need to do is check the classpath in the environment variables section of the System dialog box. Make sure it refers to . (the current directory) as well as the locations of mail.jar and activation.jar. Also when you invoke myEmail ensure you are in the same directory.
Hope this helps

Open and run the VI using FP.Open from another VI

Similar Messages

Maybe you are looking for