Open Another Project - how do I set up the published files?

I created a Menu project that launches (via buttons) two other projects. Each of these other projects has a button to return to the Menu. I copied the published set of files to each of the Callees folders. So, Menu\Callees has Run 1 and Run 2 folders (all the published files) Run 1 and Run 2\Callees each have Menu folder with all the published files. Menu launches Run 1 and Run 2 fine but the Menu button on Run 1 and 2 works once, then I get this:
No webpage was found for the web address:file:///C:/Users/Jeff/Documents/My%20Adobe%20Captivate%20Projects/menu%20test/Menu/callees /Run_1/callees/Menu/callees/Run_1/callees/Menu/index.html
Anyone have a simple explanation for how I should be setting up the published files?
Thanks so much,
Jeff

Thanks Rob,
Would running these from a web server resolve the file location problem I asked about? I tested the SWF version on my HD and got a similar error message (this time looking in the root directory, not the callees folder.) Can you point me to a reference re: how to set up files when running another project?
Thanks,
Jeff

Similar Messages

How do I set up the .exe file for silent (unattended) install?

I'm looking to do multi installs across different platforms with a WPI

Are you printing this yourself, on a network copier for example? If it's going to be printed on an offset press, it will have to be imposed by prepress techs, and it's their job to make sure that the pages are aligned correctly. There will be some part of a cross-spread image that will be lost in the spine, and their imposition method will take into account whether pages need to be moved outward from the spine by small amounts (called creep) to compensate for the wrap-around that is a part of bindery, but perfect binding isn't as bad as saddle stitch as far as that goes. Talk to your printer, but you will likely just need to compose the book in normal facing-page readers spreads and provide a multi-page PDF (not exported as spreads). They will impose the pages into printers spreads, and thank you for not doing that yourself. There will be aspects of their production that you won't or can't know about, and if you impose it, it will just make it harder for them if they have to undo what you have done incorrectly.

How to make sure, on success action 'Open another project' works on both ipad and desktop devices

If I have a project with a open another project in a new window action set to a button in that project, will only placing the swf and htm files of the newly opened project within the published folder of the parent project be enough for allowing the parent project to be played successfully both in desktop and mobile devices like ipad? To allow this, I presume multiscreen.html file located within the published folder of the parent project is the file to be used. But, since swf files can't be played on mobile devices, do I need to place the multiscreen.html file located within the published folder of the newly opened project into the published folder location of the parent project? The parent project folder location already has multiscreen.html file specific to that project and if the multiscreen.html file of the newly opened project need to be added to the published folder location of the parent project(which also has multiscreen.html file), how do I go about doing this? Can I just rename the mulscreen.html file of the newly opened project to say something different like multiscreen1.html and add this file along with the swf and htm file into the published folder location of the parent project, so that it works for both desktop or mobile devices.

From what I'm hearing, you're probably wise to have a copy of the file in both locations. One in the same folder as the SWF, and the other in with the HTML5 files. What I don't know is exactly where in the HTML5 folders your file would need to be. It might need to be at the same level as the index.html. I haven't tested this.
You should be able to figure out the answer to a lot of your questions just by testing things out on content uploaded to a web server. At the end of the day, if it works, it works.

Want to open another project from Quiz Results - can't get it to work.

I have been trying to get my course to open another project (an instruction slide) after the user completes a quiz and it is not working. The course always closes after the quiz results. I have set the Project End Options and the Pass or Fail options to all open another project (the instruction slide), but instead, after the user clicks 'Continue' on the quiz results page, the course always closes. What could I be missing? (Am using Captivate 5.)

Just finally getting my head above water and am able to respond and update. Yes, I was using a tool called RELOAD to update the imsmanifest file. Actually a great tool that I can recommend now that I worked out the kinks with Captivate. Please see this post for more information. http://www.caddicks.com/blog/2012/02/17/how-to-publish-a-multi-file-captivate-project-as-a -single-scorm-course/#comment-249711
Here's a quick summary of how I ended up resolving this - I can't even remember all the different options I tried until I settled on this! I never resolved the issue with launching another project from the quiz results page, but found a workaround that works even better.
The course starts with a brief introduction module. The 'Continue' button on the last slide is set to launch another project, which opens the course's 'main menu.'
The 'main menu' project has several buttons that launch appropriate sub-topic projects.
On the last slide of each of the 'sub-topic' projects has the 'Continue' button set to launch the 'main menu' again. Each of these had quiz questions, but feedback was set at the question level only - no quiz results page.
The last option on the 'main menu' project was a 'Course Completion' button - which launches a project containing the final quiz. (NOTE: This was always the only project that had the "Show score at the end of the quiz" set to display under Preferences / Quiz / Settings. After a lot of hair-pulling, I realized that it wasn't necessary to open another project to accomplish what I wanted to do, which was return the user to some basic instructions before they retook the quiz.)Here is how the last project was set up.
The first slide is a content slide with instructions for the quiz. When the user clicks the "Back" button from this slide, it will launch the 'main menu' project. 'Next' simply goes to the next slide.
Slides 2-5 are quiz questions
Slide 6 is the quiz results slide (turned on under Preferences / Quiz / Settings). Buttons are: Review Quiz and Continue.
Slide 7 is a content slide with instructions on what to do next. This slide has a text button that I called "Retry" and under Properties / Reporting for the button the "Include in quiz" is NOT checked. The Retry button takes the user back to the first slide in the quiz.

How do I use the time capsule to share itunes music between multiple apple devices? Also, is it possible to control the music on one device using another, and how do you set this up?

How do I use the time capsule to share itunes music between multiple apple devices? Also, is it possible to control the music on one device using another, and how do you set this up?

unless i'm missing something, i think you got mixed up, this is easy google for walk throughs
i'm assuming this is the new 3tb tc AC or 'tower' shape, if so, its wifi will run circles around your at&t device
unplug the at&t box for a minute and plug it back in
factory reset your tc - unplug it, hold down reset and keep holding while you plug it back in - only release reset when amber light flashes in 10-20s
connect the tc to your at&t box via eth in the wan port, wait 1 minute, open airport utility look in 'other wifi devices' to setup the tc
create a new wifi network (give it a different name than your at&t one) and put the tc in bridge mode (it may do this automatically for you, but you should double check) under the 'network' tab
login to your at&t router and disable wifi on it
add new clients to the new wifi network, and point your Macs to the time machine for backups

Aggregator exe project not opening another project

aggregator exe project not opening another project when published.
The same works fine in HTML.
I tried in Captivate 7 and 8 as well.

I'm having a similar issue. I've used a "home" button to return to the main menu of the course. However, all it does is return me to the last screen I was on. I've tried linking the button to a the aggregator htm and to the swf. Neither gives me the results I want. I currently have it set to open in the current window. However, I get the feeling that it's automatically invoking a bookmarking feature and I'm not getting the pop-up box asking me if I want to return to the last screen or not.

Click box - Opening another project again, again, again...

Hello,
I think I'm an idiot. I've read almoust all of the "opening another project", "linking..." etc discussions. But I have no idea how to make it working. Starting once again:
I have unlocked Flash security or whatever it is. I have a project and it is so big so I decided to cut him for more smaller projects. I would like to have a one slide project with many clickboxes areas for opening another projects.
I exported, pubished all possibilities of linked project(swf,CP,hml...) to one slide project folder. I tried Open another project, open file/URL. Nothing happens.
What do I have to do, step by step.
Where should be all projects, what formats, where to preview
I hope u understand all.
cheers Barbatian

Hello,
I know I won't be using Jump to Slide. :-)
Let me explain...
For example I have a one slide project. On this one slide is screenshot of www.adobe.com, just a picture.
I also have few more projects called "Products", "Solutions", "Learning", ...
Each of these projects explains what any of these "folders" contains.
For example:
Project Products will start:
Click here, to see our Products(with voice and mouse movement)
Next
Here u can find any of our products. Click any of them to learn about it...
Sth like this... I hope u know what I mean.
Instead of having this all in one project(1000 slides) I would Like to have main page with "hyperlinks" to another projects. But I don't want My main project to open another project as another file/window. I just want my main project to "jump to another project" in the same window. Is this possible in .exe file or .swf ?
Another way:
I would like to have my main project on web. So like the first time user won't be jumping to another windows or tab. He will be watching in one tab, one captivate "movie".
Is this possible ?
How Can I do that ?
And how Can I open those another project in other tabs/windows in web.
I tried to publish all projects to the same folder but it doesn't work... Maybe I did sth wrong. Can u write it step by step what should I do?
I hope u understand my bad english and my vision :-)
cheers Barbatian.

Every time I start iTunes I get the message: "iTunes exec has been set to run in compatability mode for an older version of Windows. Turn off compatability mode for iTunes before you open it." How do I turn off the compatability mode?

Every time I start iTunes I get the message: "iTunes exec has been set to run in compatability mode for an older version of Windows. Turn off compatability mode for iTunes before you open it." How do I turn off the compatability mode? Particularly when I have to do it before I turn on iTunes.

Try the following document, only be sure that none of the boxes in the compatibility mode tab are checked (not just the compatibility mode box itself):
iTunes for Windows: How to turn off Compatibility Mode

I've installed the Adobe Reader Plug In. Yet every time I click to see a PDF, it opens another browser and it is blank. The Browser reads about:blank. How can I fix this so that PDF's open in the browser?

I've installed the Adobe Reader Plug In. Yet every time I click to see a PDF, it opens another browser and it is blank. The Browser reads about:blank. How can I fix this so that PDF's open in the browser?

Check your settings in Options > Applications: https://support.mozilla.com/en-US/kb/Opening%20PDF%20files%20within%20Firefox#w_check-firefox-settings
Also see:
*https://support.mozilla.com/en-US/kb/Using%20the%20Adobe%20Reader%20plugin%20with%20Firefox
*http://kb.mozillazine.org/File_types_and_download_actions
'''If this reply solves your problem, please click "Solved It" next to this reply when <u>signed-in</u> to the forum.'''
Not related to your question, but...
You need to update some plug-ins:
*Plug-in check: https://www-trunk.stage.mozilla.com/en-US/plugincheck/
*Shockwave Flash (Adobe Flash or Flash): [https://support.mozilla.com/en-US/kb/Managing%20the%20Flash%20plugin#w_updating-flash Updating Flash in Firefox]

I need to create 4 A2 boards that print adjacent to one another with a photo image running across all 4 boards.How do I set up the pages so I can see the whole composition together , then print the seperate A2 boards.Do I use illustrator (C3) or Indesign?

I need to create 4 @ A2 boards that print adjacent to one another (all landscape format) with a photo image running across all 4 boards.How do I set up the pages so I can see the whole composition together , then print the seperate A2 boards? Is it best to use Illustrator(CS3) or Indesign?
Thanks.

Re: I need to create 4 A2 boards that print adjacent to one another with a photo image running across all 4 boards.How do I set up the pages so I can see the whole composition together , then print the seperate A2 boards.Do I use illustrator (C3) or Indesign
If possible, please try Indesign CS 4.

HT3523 I can play an .mov file but cannot open it to move it to another drive/disc/etc. When we try to open it, we get a message that says "The movie file for "beanmine.mov" cannot be found. Without this file, the movie cannot play properly."

We can play a .mov file (a full-length film created in final cut pro) but cannot actually open it in QuickTime. We get the error message saying that a file is missing, and the movie can't play properly without the file. The thing is, we can play the film, we just can't open it to move it to another drive. Help?
Also, can the lost file (which was deleted) be recovered from a Mac HD or an external hard drive?
Help!

We can play a .mov file (a full-length film created in final cut pro) but cannot actually open it in QuickTime. We get the error message saying that a file is missing, and the movie can't play properly without the file. The thing is, we can play the film, we just can't open it to move it to another drive. Help?
Sounds like you created a "Reference" file here. I.e., a "Reference" file is a file that tells the player how to play the data contained in a "Resource" file. When you try to open the "Reference" file in the QT Player app, the first thing the player does is check to see if the "Resource" data file is is still available where it is supposed to be. (I.e., moving/deleting the resource file or moving reference file without moving the resource file to maintain the relative path between the two will generate the error message you mentioned.)
Also, can the lost file (which was deleted) be recovered from a Mac HD or an external hard drive?
That depends. Deleting a file does not actually erase the data immediately. Instead, the operating system just tells the system directory that the space containing the movie data is available for reuse if/when needed. As time passes, the chance that some of the data sectors will be re-written by other data continuously increases. To restore the file normally requires use of a special utility that both locates and restores all of the linked sectors containing the "deleted" movie data in their correct order. Other methods of restoring files would depend on the software you routinely have active on your system. For instance, do you use "TimeMachine?" or orther software that automatically backs up your data periodically? If so, then follow the instructions for your particular application to recover a deleted file.

After downloading Mozilla Firefox 4.0 Beta to my desktop I restarted the computer, but I do not receive any prompts to create an account with a Secret Password. How do I set up the account if the prompt never show up?

Several months ago I installed the Firefox Home app on my iPhone to sync the bookmarks that I had on my Windows XP home computer. It has worked just fine until a few days ago. Just recently I was notified that the app would no longer work because of changes that have been made. I have tried to follow the instructions that were emailed to me regarding how to setup the new Firefox Sync add-on, but I am having a problem. After downloading Mozilla Firefox 4.0 Beta to my desktop and restarting my computer, I do not receive any prompts to create an account with a password and a secret phrase, as the instructions specify. How do I set up the account if the prompt never shows up?

Click on the Firefox button then select Options to open the Options dialog. Now go to the Sync panel for the option to setup a new account.

How do i set up the time capsule with only a wireless net work? it keeps asking me to plug in a cable and i do not have one.

how do i set up the time capsule with only a wireless net work? it keeps asking me to plug in a cable and i do not have one.

Are you using a v6 uitlity.. because it is a toy.. ??
Get v5 utility and then you can hold down the option key and select the right mode.
If you have lion, just install it.. For ML follow this.
How to load 5.6 into ML.
1. Download 5.6 for Lion.
http://support.apple.com/kb/DL1482
Click to open the dmg but do not attempt to install the pkg.. it won't work anyway.
2. Download and install unpkg.
http://www.timdoug.com/unpkg/
Run unpkg on the desktop.. it is very simple.. drag the AirPortUtility56.pkg file over to unpkg.. and it will create a new directory of the same name on the desktop.. drill down.. applications utilities .. there lo and behold is Airport utility 5.6 .. drag it to your main utilities directory or just run it from current location.
You cannot uninstall 6.1 so don't try.. and you cannot or should not run them both at the same time.. so just ignore the toyland version.. the plastic hammer.. and start using 5.6.. a real tool.

How do I set up the email on the my new MacBook Pro to receive "me" email

how do I set up the email on the my new MacBook Pro to receive "me" email on my Mac. I would like to use Entourage if possible but anything would be good.
I am not sure this is the right place but I could not figure out where else to post an email ( [email protected] ) question.
Thanks!
Martin

Hi Martin,
MobileMe Mail Help: Setting up Mac OS X Mail to receive your MobileMe email
The steps you follow to set up Mac OS X Mail to receive your MobileMe email depend on which version of Mac OS you’re using.
Important: For the instruction below, use the following: MobileMe Mail’s incoming mail server is “mail.me.com” and the outgoing mail server it “smtp.me.com.”
To set up Mac OS X Mail to receive MobileMe mail:
If you’re using Mac OS X version 10.4.11 or later
Open System Preferences (under the Apple icon at the upper-left of your computer screen).
Click MobileMe (if you have Mac OS X version 10.5.3 or later), or .Mac (if using version 10.4.11 to 10.5.2), and enter your MobileMe member name and password.
Open Mac OS X Mail, choose Mail > Preferences, and then click Accounts.
Click the Add button at the lower-left of the Accounts pane. Choose MobileMe from the Account Type pop-up menu, and then enter your account information.
The member name and password you use for SMTP authentication must match the member name and password in the User Name and Password fields.
To switch to POP, delete the existing IMAP account before you create the new POP account. Choose POP Account from the Account Type pop-up menu instead of MobileMe Account.

I have a new Mac Pro. I want to use my old Mac Pro as a storage drive for photos and old documents, linked to my new Mac Pro. How do I set up the old computer?

I have a new Mac Pro. I want to use my old Mac Pro as a storage drive for photos and old documents, linked to my new Mac Pro. How do I set up the old computer? Both computers have OS X10.9.3. Currently they are connected by a Firewire 800 cable.

You certainly could keep the old Mac Pro in Firewire mode (hold down the T key on its keyboard as you boot) to show its drives on the new MP. This is basically as fast as putting the drives into a Firewire enclosure.
Or you could boot it normally and share its files over the network using the Sharing panel of System Preferences. If you turn on both File and Screen Sharing, you don't even need to have a monitor attached - you can do all administration using screen sharing. However, this method requires that you open all files over the network, which will be slower than the direct-connect method above, and may also not work with all applications.
Matt

Open Another Project - how do I set up the published files?

Similar Messages

Maybe you are looking for