Open audio part of e-CD

Hi,
I did a cross platform enhanced CD (audio + data). on Mac, it
opens 2 sessions: audio and data, so the audio is not "hidden".
On PC, the autoplay from the windows explorer uses my
autorun.inf and doesn't opens the media player to play the audio
files. So, how do I add a button in my projector named "play audio"
to actually play the audio part of my e-CD ?
thank you,
ludo.

Thank you KRMult; I've been trying to use this script but it
doesn't works. I'm not a director expert (obviously) and I'm just
using it to publish my flash movie on the data session of my e-CD,
so I'm not familiar with lingo.
I looked for the global CDAudioDrive and cdAppPath functions
but I don't know what to do with those (no topics on the help with
that syntax). And the script you wrote stops on the "if
baFileExists" part in the debugger.
Can you please be specific about what should I do and how to
use this script (and maybe where can I read about CDAudioDrive and
cdAppPath).
thank you,
ludo.

Similar Messages

Quantizing audio parts?

I imported an audio part, cut it up with the knife tool. Then out of curiosity, I moved a slice slightly off the grid and started looking to see if there was a way to quantize it back to the grid. I can't find anything. For midi the quantize is visible, but as soon as you select an audio part, the quantize dialogue goes away. Is this the case that there's no quantize for audio parts in Logic Pro 7, or am I missing something?

hi, yes you can quantize audio clips..........
bare in mind the anchor on the clip dictates its position, not the absolute start of same. (these can be in the same position).
to quantize audio splices, select them, and open the edit list. go to it's highest level and there you will see these highlighted.
press the Q button on the lower left, select the value and unclick.
done, like an indian curry!!!

Wiki Pages - Open Web Part Page in maintenance view

I am trying add custom .aspx pages to a SharePoint 2010 Document Library. When I try to edit properties for those pages, the edit page shows "Open Web Part Page in maintenance view to delete problem Web Parts and remove personal settings.
Open Web Part Page in maintenance view." I click Open Web Part Page in maintenance view
The page displays
The are currently no Web Parts associated with any Web Part Zones on this page. Web Parts added to the page outside of a Web Part Zone will not appear in this list.
I don't do anything with the maintenance view because there are no Web Parts to delete.
As a test, I save the content of the custom.aspx page as a text file, custom.txt. The edit properties displays just fine.
Another test, I save the content as custom.htm. The edit properties displays just fine.
I try many variations of saving the content of custom.aspx with various html tags and even no tags at all. One version just has the text,"test" in the page. Save error:
Open Web Part Page in maintenance view to delete problem Web Parts and remove personal settings. Open Web Part Page in maintenance view."
Going down another path, I try to compare the source of this aspx page with other SharePoint aspx pages. One test is the Wiki Page. All Wiki pages display the same message on my farm. Is this a known issue with Wiki Pages?
<apparently I'm not allowed to add images yet>
As another point of comparison I opened the Edit Properties part within an Office 365 Wiki. Same message.
<apparently I'm not allowed to add images yet>

Hi Chris,
As your description, when you uploaded a .aspx page into a library and edited the properties, the message "Open Web Part Page in maintenance view to delete problem Web Parts and remove personal settings. Open Web Part Page in maintenance view"
showed.
I could reproduce this issue if I uploaded a .aspx page into a library and edited its properties.
Then I went to Site Pages library, and select a page and edit its property, the same message also showed like the screenshot:
It seems that the message will show when we edit the properties of a page no matter which library we upload it to, it seems to be by design.
In addition, if you want to upload a image into the thread, you can first upload the image into OneDrive, then copy and paste the URL of the image here.
Thanks,
Wendy
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

Hi, I have problem with importing MOV files from SJCAM 4000. MOV files are in supported formats for Adobe Premiere Elements 11. But if I'm importing MOV file, only audio part is imported, video part is not imported. How can I solve this problem?

Hi, I have problem with importing MOV files from SJCAM 4000. MOV files are in supported formats for Adobe Premiere Elements 11. But if I'm importing MOV file, only audio part is imported, video part is not imported. How can I solve this problem?

haben
From looking at the specifications of your camera (SJCam 4000), we know already what video compression your camera is using. It is H.264.
A H.264.mov file should be supported by Premiere Elements 11. On what computer operating system is your Premiere Elements 11 running?
Do you have the latest version of QuickTime installed on your computer? And, are you running QuickTime and Premiere Elements 11 from a
User Account with administrative privileges? Please go to Premiere Elements 11 Publish+Share/Computer/QuickTime to confirm that you find
presets there for the QuickTime choice there.
What are the properties of these H.264.mov files - is it 1080p30 (1920 x 1080p30) or something else? Do you know if this camera is recording with a variable or
a constant frame rate?
Please review and consider and then we will decide what next.
Thank you.
ATR

HT5100 I have an ipod shuffle, obviously it does not play video, can i use my shuffle to play the audio part of an i-tune u course that normally comes in video format? To put it differently, if i-tunes course available as video can I download the audio po

I have an ipod shuffle, obviously it does not play video, can i use my shuffle to play the audio part of an i-tune u course that normally comes in video format? To put it differently, if i-tunes course available as video can I download the audio portion of an itunes video?

Welcome to the Apple Community.
Unfortunately not.

MPD: ERROR: problems opening audio device

Since a day, maybe a little more, mpd is troubling me. When I use mpc, I get the error
ERROR: problems opening audio device
This is my mpd.conf
# An example configuration file for MPD
# See the mpd.conf man page for a more detailed description of each parameter.
# Files and directories #######################################################
# This setting controls the top directory which MPD will search to discover the
# available audio files and add them to the daemon's online database. This
# setting defaults to the XDG directory, otherwise the music directory will be
# be disabled and audio files will only be accepted over ipc socket (using
# file:// protocol) or streaming files over an accepted protocol.
music_directory "/home/adriaan/Music"
# This setting sets the MPD internal playlist directory. The purpose of this
# directory is storage for playlists created by MPD. The server will use
# playlist files not created by the server but only if they are in the MPD
# format. This setting defaults to playlist saving being disabled.
playlist_directory "/var/lib/mpd/playlists"
# This setting sets the location of the MPD database. This file is used to
# load the database at server start up and store the database while the
# server is not up. This setting defaults to disabled which will allow
# MPD to accept files over ipc socket (using file:// protocol) or streaming
# files over an accepted protocol.
db_file "/var/lib/mpd/mpd.db"
# These settings are the locations for the daemon log files for the daemon.
# These logs are great for troubleshooting, depending on your log_level
# settings.
# The special value "syslog" makes MPD use the local syslog daemon. This
# setting defaults to logging to syslog, otherwise logging is disabled.
log_file "/var/log/mpd/mpd.log"
# This setting sets the location of the file which stores the process ID
# for use of mpd --kill and some init scripts. This setting is disabled by
# default and the pid file will not be stored.
pid_file "/var/run/mpd/mpd.pid"
# This setting sets the location of the file which contains information about
# most variables to get MPD back into the same general shape it was in before
# it was brought down. This setting is disabled by default and the server
# state will be reset on server start up.
state_file "/var/lib/mpd/mpdstate"
# The location of the sticker database. This is a database which
# manages dynamic information attached to songs.
#sticker_file "~/.mpd/sticker.sql"
# General music daemon options ################################################
# This setting specifies the user that MPD will run as. MPD should never run as
# root and you may use this setting to make MPD change its user ID after
# initialization. This setting is disabled by default and MPD is run as the
# current user.
user "adriaan"
# This setting specifies the group that MPD will run as. If not specified
# primary group of user specified with "user" setting will be used (if set).
# This is useful if MPD needs to be a member of group such as "audio" to
# have permission to use sound card.
group "users"
# This setting sets the address for the daemon to listen on. Careful attention
# should be paid if this is assigned to anything other then the default, any.
# This setting can deny access to control of the daemon.
# For network
#bind_to_address "any"
# And for Unix Socket
#bind_to_address "~/.mpd/socket"
# This setting is the TCP port that is desired for the daemon to get assigned
# to.
#port "6600"
# This setting controls the type of information which is logged. Available
# setting arguments are "default", "secure" or "verbose". The "verbose" setting
# argument is recommended for troubleshooting, though can quickly stretch
# available resources on limited hardware storage.
#log_level "default"
# If you have a problem with your MP3s ending abruptly it is recommended that
# you set this argument to "no" to attempt to fix the problem. If this solves
# the problem, it is highly recommended to fix the MP3 files with vbrfix
# (available from <http://www.willwap.co.uk/Programs/vbrfix.php>), at which
# point gapless MP3 playback can be enabled.
#gapless_mp3_playback "yes"
# This setting enables MPD to create playlists in a format usable by other
# music players.
#save_absolute_paths_in_playlists "no"
# This setting defines a list of tag types that will be extracted during the
# audio file discovery process. Optionally, 'comment' can be added to this
# list.
#metadata_to_use "artist,album,title,track,name,genre,date,composer,performer,disc"
# This setting enables automatic update of MPD's database when files in
# music_directory are changed.
auto_update "yes"
# Limit the depth of the directories being watched, 0 means only watch
# the music directory itself. There is no limit by default.
#auto_update_depth "3"
# Symbolic link behavior ######################################################
# If this setting is set to "yes", MPD will discover audio files by following
# symbolic links outside of the configured music_directory.
#follow_outside_symlinks "yes"
# If this setting is set to "yes", MPD will discover audio files by following
# symbolic links inside of the configured music_directory.
#follow_inside_symlinks "yes"
# Zeroconf / Avahi Service Discovery ##########################################
# If this setting is set to "yes", service information will be published with
# Zeroconf / Avahi.
#zeroconf_enabled "yes"
# The argument to this setting will be the Zeroconf / Avahi unique name for
# this MPD server on the network.
#zeroconf_name "Music Player"
# Permissions #################################################################
# If this setting is set, MPD will require password authorization. The password
# can setting can be specified multiple times for different password profiles.
#password "password@read,add,control,admin"
# This setting specifies the permissions a user has who has not yet logged in.
#default_permissions "read,add,control,admin"
# Input #######################################################################
input {
plugin "curl"
# proxy "proxy.isp.com:8080"
# proxy_user "user"
# proxy_password "password"
# Audio Output ################################################################
# MPD supports various audio output types, as well as playing through multiple
# audio outputs at the same time, through multiple audio_output settings
# blocks. Setting this block is optional, though the server will only attempt
# autodetection for one sound card.
# See <http://mpd.wikia.com/wiki/Configuration#Audio_Outputs> for examples of
# other audio outputs.
# An example of an ALSA output:
audio_output {
type "alsa"
name "My ALSA Device"
device "hw:0,0" # optional
# format "44100:16:2" # optional
# mixer_type "hardware" # optional
# mixer_device "default" # optional
# mixer_control "PCM" # optional
# mixer_index "0" # optional
#audio_output {
# type "alsa"
# name "Sound Card"
# options "dev=dmixer"
# device "plug:dmix"
# An example of an OSS output:
#audio_output {
# type "oss"
# name "My OSS Device"
## device "/dev/dsp" # optional
## format "44100:16:2" # optional
## mixer_type "hardware" # optional
## mixer_device "/dev/mixer" # optional
## mixer_control "PCM" # optional
# An example of a shout output (for streaming to Icecast):
#audio_output {
# type "shout"
# encoding "ogg" # optional
# name "My Shout Stream"
# host "localhost"
# port "8000"
# mount "/mpd.ogg"
# password "hackme"
# quality "5.0"
# bitrate "128"
# format "44100:16:1"
## protocol "icecast2" # optional
## user "source" # optional
## description "My Stream Description" # optional
## genre "jazz" # optional
## public "no" # optional
## timeout "2" # optional
## mixer_type "software" # optional
# An example of a recorder output:
#audio_output {
# type "recorder"
# name "My recorder"
# encoder "vorbis" # optional, vorbis or lame
# path "/var/lib/mpd/recorder/mpd.ogg"
## quality "5.0" # do not define if bitrate is defined
# bitrate "128" # do not define if quality is defined
# format "44100:16:1"
# An example of a httpd output (built-in HTTP streaming server):
#audio_output {
# type "httpd"
# name "My HTTP Stream"
# encoder "vorbis" # optional, vorbis or lame
# port "8000"
# bind_to_address "0.0.0.0" # optional, IPv4 or IPv6
## quality "5.0" # do not define if bitrate is defined
# bitrate "128" # do not define if quality is defined
# format "44100:16:1"
# max_clients "0" # optional 0=no limit
# An example of a pulseaudio output (streaming to a remote pulseaudio server)
#audio_output {
# type "pulse"
# name "My Pulse Output"
## server "remote_server" # optional
## sink "remote_server_sink" # optional
## Example "pipe" output:
#audio_output {
# type "pipe"
# name "my pipe"
# command "aplay -f cd 2>/dev/null"
## Or if you're want to use AudioCompress
# command "AudioCompress -m | aplay -f cd 2>/dev/null"
## Or to send raw PCM stream through PCM:
# command "nc example.org 8765"
# format "44100:16:2"
## An example of a null output (for no audio output):
#audio_output {
# type "null"
# name "My Null Output"
# mixer_type "none" # optional
# This setting will change all decoded audio to be converted to the specified
# format before being passed to the audio outputs. By default, this setting is
# disabled.
#audio_output_format "44100:16:2"
# If MPD has been compiled with libsamplerate support, this setting specifies
# the sample rate converter to use. Possible values can be found in the
# mpd.conf man page or the libsamplerate documentation. By default, this is
# setting is disabled.
#samplerate_converter "Fastest Sinc Interpolator"
# Normalization automatic volume adjustments ##################################
# This setting specifies the type of ReplayGain to use. This setting can have
# the argument "off", "album" or "track". See <http://www.replaygain.org>
# for more details. This setting is off by default.
#replaygain "album"
# This setting sets the pre-amp used for files that have ReplayGain tags. By
# default this setting is disabled.
#replaygain_preamp "0"
# This setting enables on-the-fly normalization volume adjustment. This will
# result in the volume of all playing audio to be adjusted so the output has
# equal "loudness". This setting is disabled by default.
#volume_normalization "no"
# MPD Internal Buffering ######################################################
# This setting adjusts the size of internal decoded audio buffering. Changing
# this may have undesired effects. Don't change this if you don't know what you
# are doing.
#audio_buffer_size "2048"
# This setting controls the percentage of the buffer which is filled before
# beginning to play. Increasing this reduces the chance of audio file skipping,
# at the cost of increased time prior to audio playback.
#buffer_before_play "10%"
# Resource Limitations ########################################################
# These settings are various limitations to prevent MPD from using too many
# resources. Generally, these settings should be minimized to prevent security
# risks, depending on the operating resources.
#connection_timeout "60"
#max_connections "10"
#max_playlist_length "16384"
#max_command_list_size "2048"
#max_output_buffer_size "8192"
# Character Encoding ##########################################################
# If file or directory names do not display correctly for your locale then you
# may need to modify this setting.
filesystem_charset "UTF-8"
# This setting controls the encoding that ID3v1 tags should be converted from.
#id3v1_encoding "ISO-8859-1"
# SIDPlay decoder #############################################################
# songlength_database:
# Location of your songlengths file, as distributed with the HVSC.
# The sidplay plugin checks this for matching MD5 fingerprints.
# See http://www.c64.org/HVSC/DOCUMENTS/Songlengths.faq
# default_songlength:
# This is the default playing time in seconds for songs not in the
# songlength database, or in case you're not using a database.
# A value of 0 means play indefinitely.
# filter:
# Turns the SID filter emulation on or off.
#decoder {
# plugin "sidplay"
# songlength_database "/media/C64Music/DOCUMENTS/Songlengths.txt"
# default_songlength "120"
# filter "true"

milso wrote:
type "alsa"
name "equal"
device "default"
format "44100:16:2" # optional
mixer_device "default" # optional
mixer_control "PCM" # optional
mixer_index "0" # optional
I have mine set to plug:plugequal as I use an equalizer with alsa, but when I set it to default it works fine, try that.
That didn't work out.
Mr.Elendig wrote:Tell mpd to be more verbose. And check that mplayer -ao alsa whatever works.
Here's the output of mpd -v
listen: bind to '0.0.0.0:6600' failed: Address already in use (continuing anyway, because binding to '[::]:6600' succeeded)
path: path_set_fs_charset: fs charset is: UTF-8
database: reading DB
disabling the last.fm playlist plugin because account is not configured
daemon: opening pid file
daemon: daemonized!
daemon: writing pid file
Doesn't contain anything unusual.
EDIT: oh, and mplayer -ao alsa works fine.
Last edited by arthd (2011-02-09 15:14:09)

Can i hide "Open Web Part Page in maintenance view" link when editing wiki page properties

I am working on an Enterprisewiki site collection inside SP 2013, and currently when contributor users edit the wiki page properties by going to "Page Option >> Edit Properties" , then will find the following link, named "Open Web Part
Page in maintenance view" which sound strange :-
so can anyone advice what is the purpose of this link and how i can remove it ?

Hi,
If someone wants to open a wiki page in Web Part maintenance view then they can directly use this link to switch into the view and can directly delete problematic webparts from there.
To remove this link, you can try below jquery code in Content Editor webpart on Editform.aspx of wiki page library.
<script type="text/javascript" src="http://ajax.aspnetcdn.com/ajax/jQuery/jquery-1.11.1.min.js"></script>
<script>
$(document).ready( function (){
$("a[id$='WebPartMaintenancePageLink']").hide();
$("a[id$='WebPartMaintenancePageLink']").parent('td').parent('tr').hide();
</script>
Thanks. Please mark it as an answer if it helps.

Open a part of this page in Dashboard - Save as image

This is my first Mac and I've recently started using the "Open a part of this page in Dashboard" feature. I like it but would much rather save the selected portion to an image or file instead of to the dashboard? Is this possible?

HI and Welcome to Apple Discussions..
Try here: Dashboard widgets and web clips go here.http://www.applelinks.com/index.php/print/20212/
*"much rather save the selected portion to an image or file instead of to the dashboard? Is this possible"*
Highlight the image or file then right or control click to copy. Then you paste into Text Edit or your fav word processor. Goes for images also.
Carolyn

I have a macbook pro and Premiere Pro 5.0...I'm trying to open audio channels to do a voice over.

I have a macbook pro and Premiere Pro 5.0...I'm trying to open audio channels to do a voice over. Every time I try to record it says I don't have a open channel.

Is there some reason you have not updated PPro 5.0 to the latest version?
All Adobe updates start here and select product, read to see if you need to install updates in number order, or if the updates are cumulative for the individual product http://www.adobe.com/downloads/updates/
More hardware information might let someone answer your question... such as brand/model microphone
-Information FAQ http://forums.adobe.com/message/4200840
-Effective questions http://forums.adobe.com/thread/416679
-How to get help quickly http://forums.adobe.com/thread/419406

Couldn't open audio: Couldn't open audio device or ESD

Got the Heroes of Might & Magic III for Linux, from Loki-games,
When I run the game, the terminal shows that 'Couldn't open audio: Couldn't open audio device or ESD connection'
and, of course, the game has no sound ; o
Does anyone play this under linux?
thanks

I was having sound issues with a game on a fresh Arch install, until i realised that pulseaudio had failed to start because dbus wasn't running.
So, i started dbus
# /etc/rc.d/dbus start
Then i started avahi-daemon
# /etc/rc.d/avahi-daemon start
then i started pulseaudio manually.
$ pulseaudio --start
also, make sure you're a member of the group 'audio'. If you're not, sound may not work properly, or at all.
If these steps work, be advised that, in all probability it will only work until reboot. But that's a story for another post.
HTH,
--Aaron
Last edited by usagi (2011-11-21 20:01:11)

Open Audio Stream during Start Up

Open Audio Stream during Start Up
I would like to automatically open an audio stream during start up in OS X Tiger.
Placing an alias for the steam in the Accounts Log In Items of the System Preferences does not seem to work.
Any ideas?

Michael--
You ought to be able to do this with an AppleScript as an Account Login item. Just save the AppleScript as an application:tell application "iTunes"
open location "http://www.server.com/streaming.mp3"
end tellYou'll need the URL for the stream...
HTH,
charlie

Open audio stream url too long

I found an internet radio that I wanted to import into itunes using open audio stream, but it has 226 characters in the URL and won't allow me to paste the entire thing. Is there any way around this?

Did not fix, I cleared the cache and cookies.
The website is picasaweb.google.com
A partial peice of the url looks like this:
http://picasaweb.google.com/lh/login?continue=http%3A%2F%2Fpicasaweb.google.com%2Flh%2Flogin%3Fcontinue%3Dhttp%253A%252F%252Fpicasaweb.google.com%252Flh%252Flogin%253Fcontinue%253Dhttp%25253A%25252F%25252Fpicasaweb.google.com%25252Flh%25252Flogin%25253Fcontinue%25253Dhttp%2525253A%2525252F%2525252Fpicasaweb.google.com%2525252Flh%2525252Flogin%2525253Fcontinue%2525253Dhttp%252525253A%252525252F%252525252Fpicasaweb.google.com%252525252Fhome%25252526pli%2525253D1%25252526a

When I was using iMovie an error message came up saying to please move the play head to an open audio section when I was in searching for audio to insert into my project however there was no audio in that section of the project I was trying to add it to.

Not able to insert audio into IMovie due to an error message

I only have one video project that I ever published to iDisk. It didn't have any music or photo files attatched to it, just a few clips stitched together. I can play these clips right now in the Event Library (so I know the source files are on my computer), but strangely, under the Project Library, the project is not there. I'm almost certain that I didn't store the project on iDisk; I just completed the video and published it to iDisk (as a .mov file I think) for family to see. I've tried to figure out how to get iDisk to stop looking for this project to no avail.
I don't know if others have experienced this, but if I click on any project and on the menu bar select Share --> Remove From --> Media Browser... it lists iPod, iPhone, iPad, tv, Computer and MobileMe. Why would MobileMe be an option here? This is the case for any video project I select. Didn't iLife '11 and/or OSX 10.8 remove all mention of MobileMe? I wonder if this is part of the problem too.
Edit: I just removed every project I have from the Media Browser. Still no luck.

Macbook Pro does not play audio part of video

Hi,
I have a Macbook Pro (early 2013 with OS 10.10.1).
A colleague sent me a video file, which was originally recorded in MTS format. The sound portion of it does not play on my machine, although it generally can handle MTS. I have a colleague with a Windows PC, for him the audio plays ok. I have another colleague with an older MBP, for him the audio also plays ok. But then I have two more colleagues with a newer MBP like me, and for none of us the audio plays at all. The strange thing is that I can open the file in various editors such as Premiere, Audition, or Logic Pro, and they would all show the waveform of the audio, even the VU meters react normally, but there still is no audible sound.
On the machines that play the sound, we have tried converting the video and exporting the audio portion into various other formats, but with the very same result. None of them play sound for me. This is extremely weird and we have no answer what could be the problem.
Any help would be very much appreciated.
Thanks a lot & best regards,
Rainer

Hi Eric,
thanks for the reply.
As I said, we had tried several editors and players, as well as all kinds of formats, using all kinds of converters, but so far to no avail.
The AAC codec is a common codec for the Mac, so there should be no need to convert it. I have videos with that codec that play ok. It already turned out that converting the video file to other formats does not make any difference.
But thanks anyway,
Rainer

Soundtrack Pro Crashes when opening Audio File Project

I am just starting to use Soundtrack Pro 2 with FCP 6. When I try to send an Audio File Project from FCP, Soundtrack Pro starts up, then closes. If I try to open the Audio File Project within Soundtrack Pro the program closes. Any Suggestions? Thanks.

In trying workarounds, I exported the clip as a movie from FCP then tried to open it in Soundtrack Pro. STP closed. I also tried opening the (sent).stap file that FCP generated, and Soundtrack Pro closed again. Also, STP does not give me the error window saying the program closed unexpectedly and do I want to report it. It just stops. Any thoughts? Thanks a lot.

Open audio part of e-CD

Similar Messages

Maybe you are looking for