Open BO report via wireless connection Blackberry

Dear All,
does anyone knows about how to open BO report in BB via wireless connection. is it need installed BO Mobile XI? or what is the best way to open BO report with Blackberry.
Please Help.
Thnaks so much

You know that is weird.... when the AppleTV is wireless and the Mac Book is wireless then iTunes can see it! So I guess it must be how the router is treating the two (wired and wireless) as two separate networks some how.
I will go with this as for some strange reason accessing iTunes Store is faster via wireless on the AppleTV than it was when wired.
Still would like to know why it is doing that... something to research.
Oh and the router is a DLink DVA-G3810BN
Cheers,
Chris

Similar Messages

AutoCAD 2009 crashes when printing with HP Laserjet CP1525nw via wireless connection

Printing to CP1525nw via wireless connection crashes AutoCAD 2009 on a WIndows 7 Home OS + Sony VAIO VPCL21M1E
Works fine printing from any other application.

I'm facing the same problem but, i'm AutoCAD 2012 and it crashes when printing with HP Laserjet CP1525n via USB or network cable

Problem with connetction to wrt54g2 via wireless connection with WPA/WPA2 & wireless MAC filter

Hello,
I'm Alexey from Novosibirsk, Russia.
I have a problem with connection to wrt54g2 from my DELL D630 notebook via wireless connection. When I setup WPA/WPA2 in wireless security and wireless MAC filter I can't connect from notebook to WRT - in Windows I see that dynamic IP address from WRT is not assigned. When I switch off security mode to disable always OK, but I need a wireless security between DELL and WRT.
Connection via cable Ethernet port is OK.
Can You help me?

Have you tried the different laptop...?
Download 1.71 MB the firmware for WRT54G2 v1 and reflash the router's firmware.After reflashing/upgrading the router's firmware,reset the router for 30 seconds and reconfigure the router from scratch.

Open Webi reports via xcelsius

Hi Gurus,
I want to open webi report using URL BUTTON via xcelsius dashboard.
I genereted webi report url. and I tested it on borwser(explorer and firefox). ther was no problem, I can see webi report.
But When I used url button on xcelsius dashboard; first came bobje login page, After I İnput my logon info. ooops
seem below eror message.
An error has occurred: An error occured while trying to view the document
What is the problem? Anybody can help me, please.
Best Regards
Bulgur

Hi Bulgur,
what kind of link are you using? Did you try using the openDocument functionality?:
http://www.businessobjectstips.com/tips/infoview/opendocument-an-introduction-to-a-powerful-tool/
Regards
Victor

Linking two networks via wireless connection

I am looking to ‘link’ two parts of my house together to the same network… how do I do this?
I have a WRT54G in my office(Point A) where the DSL comes in. In another part of my house (Point B) I want to add another desktop and a network device both have 100Meg wired connections at point B. How can I link A and B together via wireless while still having the devices in Point B connected to a wired hub.
I want my WRT54G at A to control DHCP, etc.
From looking at the Bridge WET54G it will connect to one device only. Looking at the Wireless Access Point it is not clear what the differences are as they both have only one port… Do I need an access point to attach to a hub? Therefore two products?
Any help would be great.
This is what I tried before based on what one of the guys in the store told me... but it did not work.
I tried buying a USB wireless adaptor (Netgear) to add to the PC and then have the PC plugges into a $15.00 switch I picked up at Fry's. then plugging in the Sonos into the switch. The Netgear adaptor was junk and dropped connection all the time and would not work with WEP. After messing with the DNS and gatway it kind of worked, but took forever to access anything as I guess it was trashing around to with all the network paths... I really dont know, but I do know it did not work.

hello ! so far you have been on the right track....i'll help you clear the confusion
the WRT will communicate wireless with the WET(bridge) the bridge will be hardwired to a switch....and the othe PC and netrwork device will also be hardwired to the switch.
The way this will work ....the DHCP will be controlled by the router...this in turn will assign DHCP ip's to all PC's/devices connected to the network.
The PC and network device connected to the switch will get the IP from the router itself...the bridge will do exactly that.....it will bridge a wired and wireless medium.
So go in for a WET .....and let me know if you face any issue or need any further clarification .

Auto open specific webpage on wireless connection?

Hello,
I want to setup a wireless connection that when a user connects to my wifi hotspot, an specific webpage automatically pops up on the web browser. Is there a general solution to run this or it depends on wireless router?
This topic first appeared in the Spiceworks Community

Wanted to throw this out here for any fellow spiceheads running EdgeRouters. Its a free update you just need to install the latest firmware to get the new features. Once you apply the update you have to log into your Edgerouter and enable Traffic Analysis as it is off by default after the updatehttps://www.youtube.com/watch?v=-5AHsGlAMNI&feature=youtu.be&utm_source=Ubiquiti+Newsletter+...https://community.ubnt.com/t5/EdgeMAX-Updates-Blog/EdgeMAX-EdgeRouter-software-release-v1-7-0/ba-p/1...

Problem connecting laptop to printer via wireless connection

I installed my HP Photosmart D110 series and the printer is not detecting my wireless internet (which is a Verizon Wireless card) . I only know the basics when it comes to computers, internet, etc. Therefore, this might be a completely stupid question, but is it possible to connect only through my Verizon card or do I need to purchase a router as well?
When I print my Wireless Network Test Report from my printer it tells me that it's recommended to change my network name to make it unique? I have no idea how to do this. And is it even applicable here?
I would greatly appreciate some feedback here.Thank you!

OK,
1. On the printer: Setup > Network > Reset network Defaults
2. On your PC, go to Start > Control Panel > Network and Sharing Center. Look for a wireless network that starts with 'hp" or "HP". Join it. There is no password. On the printer: Setup > Network > WIreless Network Test.
3. Now, in Start > Control Panel > Printers, Click the Add a printer
4. Select Local printer
5. Select Create a new port and select Standard TCP/IP Port and click Next button.
6. Under Device type, select TCP/IP Device. Under Hostname or IP address, enter the printer's host name (found on the printer's network configuration report the generated above). Click Next.
If you get a message about Additional Port Information Required, then the printer was not found using the host name. You can go back and retry or using the printer's IP address instead of the host name.
7. Select Hewlett-Packard from the list of manufacturers and select and select your printer model. Click Next.
If your printer model was not listed, then select Have Disk, browse the HP CD that came with your printer and select the first file that starts with hp and ends with inf. Click Open then OK. Select your printer model. Click Next.
8. If you are asked, use the currently installed driver.
9. It will ask for the Printer name -- enter a new name or use the existing one. This will be the name of the printer that you select from other applications.
10. You may be asked to share the printer. Make a choice and click Next.
11. The Print Test Page box appears. Go ahead and print it.
12. Click Finish.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

How to print A3 from Xerox WCP 7337 printer via wireless connection?

I connected my Macbook v10.6.8 to Xerox WCP 7337 manually by typing the Ip address of the printer. I can see the printer, everything is fine but i want to print A3 from Tray 4. When choosing the paper size, he neither shows me A3 nor the Tray? I tried to manually type in the sizes (297mmx420mm) but it doesn´t work.he chooses from Tray 2 automatically, saying the paper size is wrong of course....
Can someone help me, please?

OK,
1. On the printer: Setup > Network > Reset network Defaults
2. On your PC, go to Start > Control Panel > Network and Sharing Center. Look for a wireless network that starts with 'hp" or "HP". Join it. There is no password. On the printer: Setup > Network > WIreless Network Test.
3. Now, in Start > Control Panel > Printers, Click the Add a printer
4. Select Local printer
5. Select Create a new port and select Standard TCP/IP Port and click Next button.
6. Under Device type, select TCP/IP Device. Under Hostname or IP address, enter the printer's host name (found on the printer's network configuration report the generated above). Click Next.
If you get a message about Additional Port Information Required, then the printer was not found using the host name. You can go back and retry or using the printer's IP address instead of the host name.
7. Select Hewlett-Packard from the list of manufacturers and select and select your printer model. Click Next.
If your printer model was not listed, then select Have Disk, browse the HP CD that came with your printer and select the first file that starts with hp and ends with inf. Click Open then OK. Select your printer model. Click Next.
8. If you are asked, use the currently installed driver.
9. It will ask for the Printer name -- enter a new name or use the existing one. This will be the name of the printer that you select from other applications.
10. You may be asked to share the printer. Make a choice and click Next.
11. The Print Test Page box appears. Go ahead and print it.
12. Click Finish.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

How do I use the airport express to connect a remote PC via ethernet cable and access the internet via wireless connection, How do I use the airport express to connect a remote PC via ethernet cable and access the internet via wireless connection

Trying to connect my xbox to the airport express. Have wireless in home and do not have a ethernet point behind tv/xbox. How do I configure the airport express to connect to my wireless network and then the airport express can use its connection via ethernet to connect the xbox to the internet.

Is your AirPort Express Base Station (AX) a 802.11n model? If it is, you can reconfigure it as a wireless Ethernet bridge or ProxySTA. This would allow the AX to join another wireless network and have its Ethernet port enabled for wired clients, like the Xbox 360.
To activate ProxySTA, you must set up the Express to join a wireless network and then enable the Allow Ethernet Clients setting; both settings are located in the Wireless tab of AirPort Utility.

Error while creating Power View Report via BISM connection.

I am able to create a PowerView Report using Microsoft BI Semantic Model connection without any problem. Everything works from home. But when I try to create Power View report using a BISM connection, I am running into errors. I've verified all permissions
are all set correctly and SQL Browser service is running as well. Please see below error message. Greatly appreciate any pointers.
Detailed error message
Throwing Microsoft.ReportingServices.ReportProcessing.ReportProcessingException: , Microsoft.ReportingServices.ReportProcessing.ReportProcessingException: Cannot create a connection to data source 'TemporaryDataSource'. ---> Microsoft.AnalysisServices.AdomdClient.AdomdConnectionException:
A connection cannot be made to redirector. Ensure that 'SQL Browser' service is running. ---> System.Net.Sockets.SocketException: The requested name is valid, but no data of the requested type was found at System.Net.Sockets.TcpClient..ctor(String
hostname, Int32 port) at Microsoft.AnalysisServices.AdomdClient.XmlaClient.GetTcpClient(ConnectionInfo connectionInfo) --- End of inner exception stack trace --- at Microsoft.AnalysisServices.AdomdClient.XmlaClient.GetTcpClient(ConnectionInfo
connectionInfo) at Microsoft.AnalysisServices.AdomdClient.XmlaClient.OpenTcpConnection(ConnectionInfo connectionInfo) at Microsoft.AnalysisServices.AdomdClient.XmlaClient.OpenConnection(ConnectionInfo connectionInfo, Boolean&
isSessionTokenNeeded) at Microsoft.AnalysisServices.AdomdClient.XmlaClient.Connect(ConnectionInfo connectionInfo, Boolean beginSession) at Microsoft.AnalysisServices.AdomdClient.XmlaClient.GetInstancePort(ConnectionInfo connectionInfo)
at Microsoft.AnalysisServices.AdomdClient.XmlaClient.GetTcpClient(ConnectionInfo connectionInfo) at Microsoft.AnalysisServices.AdomdClient.XmlaClient.OpenTcpConnection(ConnectionInfo connectionInfo) at Microsoft.AnalysisServices.AdomdClient.XmlaClient.OpenConnection(ConnectionInfo
connectionInfo, Boolean& isSessionTokenNeeded) at Microsoft.AnalysisServices.AdomdClient.XmlaClient.Connect(ConnectionInfo connectionInfo, Boolean beginSession) at Microsoft.AnalysisServices.AdomdClient.AdomdConnection.XmlaClientProvider.Connect(Boolean
toIXMLA) at Microsoft.AnalysisServices.AdomdClient.AdomdConnection.ConnectToXMLA(Boolean createSession, Boolean isHTTP) at Microsoft.AnalysisServices.AdomdClient.AdomdConnection.Open() at Microsoft.ReportingServices.DataExtensions.AdoMdConnectionBase.InternalOpen()
at Microsoft.ReportingServices.Diagnostics.DataExtensionConnectionBase.OpenConnection(IProcessingDataSource dataSourceObj, DataSourceInfo dataSourceInfo, IDbConnection conn) --- End of inner exception stack trace ---;

So , have you actually came to a conclusion about the problem. I have a similar one in my environment.
<detail><ErrorCode xmlns="http://www.microsoft.com/sql/reportingservices">rsCannotRetrieveModel</ErrorCode><HttpStatus
xmlns="http://www.microsoft.com/sql/reportingservices">400</HttpStatus><Message xmlns="http://www.microsoft.com/sql/reportingservices">Erro
ao carregar o modelo para o item ou a fonte de dados 'http://gasmignethml/BICenter/Galeria%20PowerPivot/BIGASMIG.bism'. Verifique se as informações de conexão estão corretas e se você tem permissões para acessar a fonte de dados.</Message><HelpLink
xmlns="http://www.microsoft.com/sql/reportingservices">http://go.microsoft.com/fwlink/?LinkId=20476&EvtSrc=Microsoft.ReportingServices.Diagnostics.Utilities.ErrorStrings&EvtID=rsCannotRetrieveModel&ProdName=Microsoft%20SQL%20Server%20Reporting%20Services&ProdVer=11.0.5058.0</HelpLink><ProductName
xmlns="http://www.microsoft.com/sql/reportingservices">Microsoft SQL Server Reporting Services</ProductName><ProductVersion xmlns="http://www.microsoft.com/sql/reportingservices">11.0.5058.0</ProductVersion><ProductLocaleId
xmlns="http://www.microsoft.com/sql/reportingservices">127</ProductLocaleId><OperatingSystem xmlns="http://www.microsoft.com/sql/reportingservices">OsIndependent</OperatingSystem><CountryLocaleId
xmlns="http://www.microsoft.com/sql/reportingservices">1033</CountryLocaleId><MoreInformation xmlns="http://www.microsoft.com/sql/reportingservices"><Source>ReportingServicesLibrary</Source><Message
msrs:ErrorCode="rsCannotRetrieveModel" msrs:HelpLink="http://go.microsoft.com/fwlink/?LinkId=20476&EvtSrc=Microsoft.ReportingServices.Diagnostics.Utilities.ErrorStrings&EvtID=rsCannotRetrieveModel&ProdName=Microsoft%20SQL%20Server%20Reporting%20Services&ProdVer=11.0.5058.0"
xmlns:msrs="http://www.microsoft.com/sql/reportingservices">Erro ao carregar o modelo para o item ou a fonte de dados 'http://gasmignethml/BICenter/Galeria%20PowerPivot/BIGASMIG.bism'.
Verifique se as informações de conexão estão corretas e se você tem permissões para acessar a fonte de dados.</Message><MoreInformation><Source>Microsoft.ReportingServices.ProcessingCore</Source><Message msrs:ErrorCode="rsErrorOpeningConnection"
msrs:HelpLink="http://go.microsoft.com/fwlink/?LinkId=20476&EvtSrc=Microsoft.ReportingServices.Diagnostics.Utilities.ErrorStrings&EvtID=rsErrorOpeningConnection&ProdName=Microsoft%20SQL%20Server%20Reporting%20Services&ProdVer=11.0.5058.0"
xmlns:msrs="http://www.microsoft.com/sql/reportingservices">Não é possível criar uma conexão com a fonte de dados 'TemporaryDataSource'.</Message><MoreInformation><Source>Microsoft.AnalysisServices.AdomdClient</Source><Message>A
connection cannot be made to redirector. Ensure that 'SQL Browser' service is running.</Message><MoreInformation><Source>System</Source><Message>The
requested name is valid, but no data of the requested type was found</Message></MoreInformation></MoreInformation></MoreInformation></MoreInformation><Warnings xmlns="http://www.microsoft.com/sql/reportingservices"
/></detail>
Any help will be very welcome.
Thanks in advance
abcoura | osmanos.org

I have an iPad Air and hp3210. Can I connect via wireless connection

Question as per heading

Hello Cruiser27,
Welcome to the HP Support Forums! I understand you would like to use your HP Photosmart 3210 with your iPad Air wirelessly. Unfortunately this is an older model printer that does not include the ePrint, AirPrint or wireless feature.
To get a better understanding, take a look here: HP Web-Connected Printers and Supported Cloud Services
If you are interested in a AirPrint supported printer, I suggest calling our technical support at 800-474-6836, to what upgrade options they have available to you. If you live outside the US/Canada Region, please click the link below to get the support number for your region. http://www.hp.com/cgi-bin/hpsupport/index.pl
I hope this helps!
Thanks,
HevnLgh
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

I can't get my HP Officejet 4620 printer hooked up via wireless connection

I have tried every suggestion given to me . I went through the entire troubleshooting process . I also did the connection test , which the printer passed . So why is it passing the connection test , but not really connected ? I have turned off firewall , downloaded hp suggested software , it just doesn't make sense . I even took it back to store and traded it in for a new one. I did that because I paid for online support , and they couldn't fix the problem . Now this one is doing the same thing as the one I took back ! Does anyone have any suggestions ? I have a large assignment due at college on tuesday and I need to get started !

What router? What operating system? What antivirus (if any)?
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

HFM and Workspace 11.1.2.0 issues with opening Apps and reports via web

Hi,
we are running decentralized environment where we have HFM Web and App servers on Windows 2008 Server SP2 and few shared elements like OHS, HSS (Shared Services) and Workspace service from Solaris 10 SPARC (64bit) server.
The base version is 11.1.2.0 and on Windows we have fixes from 1-9 installed whereas on top of Solaris we have no fixes/patches yet installed.
When we test workspace from web server desktop connecting to Solaris server it seems traffic is fine as Apps are available and browsing them seems to work normally = Webserver is able to locate Workspace on Solaris, Workspace is able to connect to HFM App server and App server again able to connect HFM App db container.
When we access to workspace url over web (the traffic according to my understanding should go via OHS to Webserver and then redirect to Solaris server Workspace and then like mentioned above.
Something gets wrong here as when accessing Workspace url we get non-showing icons, $ characters in messed up menu rows and few error messages like :
- Invalid or could not find module configuration
- Required application module hfm.appcontainer is not configured. Please contact your administrator
- Namespace Communication Error
Also opening test report via web url workspace gives error:
Required application module reporting.reportViewer is not configured. Please contact your administrator.
+
Namespace Communication Error
Our experience from previous lower environment was that symptons like described might be caused by wrong service start order. Thus we tried to review this carefully and boot in correct order, but still problems. Also, boot order shouldn't be totally wrong as workspace works when using directly from Web server.
If any of mentioned symptons rings anyone's bell please reply.
Something still in firewalls or rather in configuration, OHS maybe?
At this point we don't yet dream of proper loadbalancing or High availability, but rather get this single web and single app server server + shared elements from Solaris server to work without error messages.
We do know that release 11.1.2.1 is supposed to fix many things, but we need to get this 11.1.2.0 working in a way or another.
Thanks for any tips that might arise.
Br, MK
Edited by: user9327521 on Nov 30, 2010 4:55 AM

Were u able to ever resolve this? And how?
Thanks,
Sejal

HP Officejet 6500A Plus will not maintain wireless connection reliably

For the HP EXPERTS on Expert Day, April 18, 2012:
B.L.A.T. (Bottom Line At Top): We have an HP Officejet 6500A Plus purchased about 5 months ago. We wanted to use it as a wireless-connected printer in another room besides our home office. It is useless to us because it will not maintain its wireless connection, even sitting just a few feet from the router in the same room. Except for numerous hours of troubleshooting, we have left it sitting powered up, but unused and idle, for almost the entire 5 months in our home office. DURING ALL THAT IDLE TIME, IT HAS LOGGED OVER 3,200 DISCONNECTS, at a consistent rate of 24 disconnects every 24 hours, even though it ALWAYS reports that the wireless signal quality is “EXCELLENT” (all this is according to the Wireless Network Test Reports we’ve printed throughout the last 5 months). So our question is, what is it that this printer is trying to do once an hour over a wireless connection that is causing these thousands of disconnects? And how can we stop it?
NOTE! Before you round up the usual suspects (namely our router and our PC firewalls) please note that we also bought an HP Officejet Pro 8600 Plus ON THE SAME DAY as the Officejet 6500A Plus. The 8600 was also installed with a wireless connection, and has worked without a single network issue for the entire 5 months.
NOW, FOR THE REST OF THE STORY…
WHO WE ARE: My wife and I have worked on HP equipment for 33 years, starting in 1979 as corporate customers of HP when we worked for Exxon; then we both worked for HP directly for 17 years; and we’ve now used dozens of pieces of HP equipment in our home during the last 12 years in retirement. We’re primarily software folks, so we’re not exactly experts in hardware and networking, but on the other hand, this ain’t our first rodeo either.
OUR CONFIGURATION:
PC’s – All running Windows 7 x64 with all important patches applied and Norton Internet Security 2012: HPE-270f and HP AIO 200-Quad, each with full 6500A and 8600A drivers installed on wireless connection. These 2 PC’s themselves can connect either wirelessly or via Ethernet to our home network. The 270f has a dual-band wireless board. Both bands work. We also have a new dv7t laptop with only the full 6500A driver installed via wireless connection. The laptop is now upstairs and it’s connected to our home network wirelessly without any issues. (This is where we had hoped to also put the 6500A, but it needs to work reliably via wireless connection.)
ROUTER: Netgear N600 WNDR3700 providing Ethernet and wireless networking. Router provides a very strong wireless signal throughout the house. No wireless problems with any other equipment including an iPod, two Kindle Fires besides all the HP equipment.
PRINTERS: Besides the two HP printers, the HPE-270f PC has a Canon MP960 installed on it. And if we can’t get the 6500A working right or replaced with something that does work right, we may be buying our second Canon printer. By the way, on the 6500A, ePrint and App’s are set to ON, but of course they’re not being used, just like everything else on this AIO.
OTHER: We also have a Sonos music system that connects to our network via Ethernet and has its own proprietary mesh network (on another frequency) for transmitting ripped music wirelessly to speaker units throughout our house. (If you aren’t familiar with this totally cool system, check out sonos.com). We’ve never seen any evidence of interference between these two wireless networks, or our wireless phone sets either.
HP TOOLS AVAILABLE ON ALL 3 PC’s: HPU
UPDATE 5.003.001.001 (reporting everything up-to-date); HPHDU 3.1.0.17; HPPDU 5.0.0.015 and HPNDU 4.3.0.002.
SYMPTOMS: The 6500A Plus installs quickly and easliy, and connects wirelessly just fine during installation. But sometime over the next hour (usually less), it disconnects and won’t print from PC applications. Sometimes the application puts up an “Unable to communicate with printer” screen, even though the PC usually thinks the printer is “ready”. Other times, the PC thinks the printer is offline (but printers don’t have “offline” buttons anymore!). Often, if you just leave everything alone, the 6500A will somehow reconnect and print out the spooled file 5-30 MINUTES later. So it does usually seem to be able to recover given some time, but that doesn’t always fit our schedule! Occasionally, turning the wireless radio on the printer off and back on will fix it right away. But usually, you have to power the printer completely off, and then back on. As far as we know, that always fixes it…..until the next disconnect a few minutes later!
PREVIOUSLY TRIED: After reading some of HP’s wireless network support websites, I manually assigned a fixed IP address to this printer. It didn’t seem to matter; according to the wireless network test report, it still logs disconnects at the rate of one per hour, and all the failure symptoms were the same.
We also dabbled a bit with setting this printer as “trusted” to the Firewall, but that didn’t seem to matter either.
Next, we connected the printer via Ethernet. The printer immediately started to work, even though it had just been in its “failed” state over the wireless connection. As far as we know, it never failed while connected via Ethernet. This seems to point to a purely wireless hardware/firmware problem on the printer itself.
Late last year, I tried two different chat sessions about this with the inter-continental AIO support teams, each one lasting several hours. Unfortunately, none of their optimistic solution scripts seemed to fit our problem. They both seemed determined to reconfigure the 6500A as a TCP/IP printer, which of course worked fine initially, just like everything else. At this point, they would understandably want to close the chat. But 20-30 minutes later, we could no longer print to it. During the second chat, they got into one of our PC’s remotely and effectively turned off the spooler (by selecting “Print Directly” or something like that). After that, all was well again (as usual) UNTIL the printer disconnected, at which time attempting to print from that PC would HANG the application (since the spooler was no longer buffering) and eventually hang the whole PC. One giant leap backwards. That’s when I gave up on the multi-hour chat sessions.
The three diagnostic utilities (HDU, PDU, NDU) have been tried over and over. When the printer is in its disconnected state, the DU’s usually don’t detect the 6500A at all, or if they do detect it, they are unable to fix anything. Frankly, it’s easier to just power the printer off (which takes about a minute) and power the printer back on (which takes more than a minute) and then wait for the spooler to kick in (usually about 30 seconds). BUT WE DON’T CONSIDER THAT A SOLUTION!!
B.L.A.B. (Bottom Line At Bottom): We have used up nearly the entire black ink cartridge and at least a ream of paper troubleshooting this brand new printer, to no avail. This printer is useless to us unless it can maintain a wireless connection reliably. Please help!
Thanks –
Bob and Jane
(Note: we have an appointment from about 11:20 am EDT – 1 pm EDT, 8:20 am PDT till about 10 am PDT)

I bought the Officejet 6500A Plus about one month and have experienced the very same problem. I tried to remedy this problem following suggestions in a number of different posts (static IP, router, firewalls etc), all to no avail. Last week I called support. The support I received by the tech over several hours and different days for a week was very good. However none of his suggestions corrected the connection issue. After today's recommended fix failed, he advised HP is aware of this issue with the 6500 and other affected printers. He claimed HP was working on a firmware upgrade. He did not know when the update would be provided. The tech also claimed HP acknowledged this problem in a written announcement. He agreed to email the announcement to me. I haven't received it. This has been the only problem I've had with the 6500

Preventing data corruption with TM and a TC over a wireless connection?

Long story short: I was using TM and a TC via wireless connection to do the usual ~/ backups. My last "manual" backup to a USB hard drive was on June 1.
I decided to wipe the partition to remove a lot of built-up garbage, etc., and reinstall Snow Leopard -- which I did, followed by the 10.6.4 combo update, the usual other patches, and the like. Still reinstalling a thing or two. But when I tried to use Time Machine to restore the things I wanted to keep (about 100 GB of data in all), it was sporadically corrupted and useless. Handfuls of MP3 files that wouldn't play, a good number of PDFs that wouldn't open and were unrecognizable in Preview.app, that sort of thing.
I went back to the June 1 data set and have noticed no issues thus far, but that also means that everything new from June 1 to mid-July was lost.
I would like to still be able to use TM+TC wirelessly, but have it be reliable, so what I'm wondering is this: how can I ensure data integrity when wirelessly backing up my home directory? What can I do to make sure corruption issues like this don't happen again?
I guess the obvious one is to not stop backups in progress by closing the lid or such a thing, but... what else?
Thanks.

I would like to still be able to use TM+TC wirelessly, but have it be reliable, so what I'm wondering is this: how can I ensure data integrity when wirelessly backing up my home directory? What can I do to make sure corruption issues like this don't happen again?
I don't mean to be negative here, it's just that with so many wireless interference issues with other networks, cordless phones, security systems, other nearby electronics, etc...the list goes on....I find that it is getting difficult to use the words "wireless" and "reliable" in the same sentence.
If you consider that a business, with important files to back up constantly, would never consider the use of wireless for this function, it might help place things in perspective.
If you are using Time Machine, I think it goes without saying that your first master backup should be using ethernet because the entire computer is being backed up on this pass. Not only will the backup proceed much more quickly, but it will be much more reliable as well. There are no wireless interference issues when you use ethernet.
If you don't need to backup each hour, as Time Machine does, you might want to look at Time Machine Editor to allow you to setup a backup schedule whenever you like. Maybe once a day at 2 or 3 AM when things around the neighborhood on wireless systems have quieted down and the cordless phones are not in use. Or, if you are on the computer quite a bit, maybe twice or three times day. This will minimize the chances of a corrupted backup due to wireless interference.
And a good wireless connection is a must. The "bars" at the top of your computer screen are there basically for show and they tell you nothing about damaging noise that may be present on your network. Post back if you want more info on evaluating your wireless signal quality, which is a combination of the best signal with the lowest noise.
I guess the bottom line is this...the more you can use ethernet (maybe think of your important data as if it were your business files), the better things will be.
Message was edited by: Bob Timmons

Open BO report via wireless connection Blackberry

Similar Messages

Maybe you are looking for