Open browser behavior does not work properly

I have quite a few websites in subfolders to my root website. I have tried using the open browser behavior to open a smaller resized html page in two of these subfolders. When I apply this behavior it causes about 20 windows to open up of this page.
However, I have another subfolder where the behavivor works perfectly.
What could be causing this error. All these websites are created with templates. Maybe this has something to do with it.
A quick second question. I use ico files to have an image in the url. Everything I have read and the way I used to get this to work was to put these images in the root level. However, using template, they have to be put in the templates folders to work. I don't remember have I came to discover this. Why is this?
I really would like some input to the open browser behaviror problem. Any help will be appreciated.
Joe

It's hard to say what the problem could ber without seeing the page in question. Could you post a link to a live page?
The actual .dwt template (if it's being used correctly) is only used by DW, you do not need to upload it to your actual web server or place your .ico file within it. You may have a link in the head section of your template that is pointing to the .ico file within the wrong folder, and that could be causing the issue.

Similar Messages

After installing acrobat my Microsoft office package does not work properly, word will not open and in my email i can't select anything with the mouse

After installing acrobat my Microsoft office package does not work properly, word will not open and when I want to write an email in my outlook email i can't select anything with the mouse. so copy past en delete are not an option.@

Are you using any MS Office third party Add-ins? Test: Remove third party Add-ins other than PDFMaker. Test to see if the MS Office apps run afterward.
Did you attempt to repair MS Office? Test: Go to Add/Remove Control Panel run Repair.
Finally, have you tried testing to see if it's PDFMaker? Test: Use the Add/Remove Control Panel to modify the Acrobat installation to remove PDFMaker. See if MS Office applications launch and behave correctly?

I am using firefox 3.6.17 i upgraded it to 4.1.but it does not work properly sometimes it opens every website and most of the time it does not work . so what is the problem please help . thank you

i am using firefox 3.6.17 i upgraded it to 4.1.but it does not work properly sometimes it opens every website and most of the time it does not work . so what is the problem please help . thank you

Did you check your security software (firewall)?
A possible cause is security software (firewall) that blocks or restricts Firefox or the plugin-container process without informing you, possibly after detecting changes (update) to the Firefox program.
Remove all rules for Firefox from the permissions list in the firewall and let your firewall ask again for permission to get full unrestricted access to internet for Firefox and the plugin-container process.
See:
* [[Server not found]]
* [[Firewalls]]

RH 5.5 output does not work properly in RH 7

I inherited a WebHelp project created in RH 5.5. I have RH 7.
When I open the files, make modifications, and recompile them, the
output does not work properly once I put it on our hardware box.
Those infamous red squares are present and there seems to be a lot
of .js files being called, but even when I do a straight 1:1 copy
and include all the files, and delete the red squares, it still
doesn't work right.
Also, oddly, when I open the original (5.5) files in my v7 --
even without making ANY changes at all -- the TOC has
disappeared.

When you view the upgraded source files in RH7, are the red
squares seen the editor?
When you generate to a local folder and view the output
there, are the red squares present? Are there any other issues with
the generated output?
Have you applied all three patches to RH7? Help About should
show 7.0.3.

Flashback Reclaimable Does Not Work Properly

We saw the strange behavior of flashback reclaimable space as it does not work properly if the PERCENT_SPACE_USED of v$flash_recovery_area_usage is near to 100 (99.9x). As we are running Oracle 10gR2 (Cluster & RAC) to manage our production RAC database, it is a two node RAC. on IBM AIX 6.1
Today at 9:00 AM, we observed that 97% reclaimable space was available. And db_recovery_file_dest_size is 460 GB out of 600 GB (mount point). No other process is being used this mount point for any IO, it is reserved for flashback only. We left 140 GB space free on mount point to over come any dynamic space requirement for flashback.
At 10:00AM we received out of space message in alert log file and during 9:00 AM to 10:00 AM 10 to 15 archive logs were created and at 9:50AM some archive log were also deleted automatically by oracle server(default behavior). Please see the output below.
FILE_TYPE PERCENT_SPACE_USED PERCENT_SPACE_RECLAIMABLE NUMBER_OF_FILES
CONTROLFILE 0 0 0
ONLINELOG 0 0 0
ARCHIVELOG 99.9 98 1520
BACKUPPIECE 0 0 0
IMAGECOPY 0 0 0
FLASHBACKLOG 0 0 0
It is really a strange behavior, please is there any one who face the same issue or what may be the reason for this ?
regards,
Edited by: user13656883 on Jul 18, 2011 11:27 PM

Dear CKPT,
we daily have 3 times archive log backup and after every backup we do crosscheck. as is mentioned earlier, 99% space was shown as used and but on the other hand 97% space was also shown as reclaimable. so on these bases we are very confused , why oracle behaves like this and throw error in alert log as below
ORACLE Instance rac1 - Archival Error
Mon Jul 18 09:59:08 2011
ORA-16014: log 1 sequence# 39143 not archived, no available destinations
ORA-00312: online log 1 thread 1: '/u02/oradata/rac/redo01.log'
Mon Jul 18 09:59:08 2011
Errors in file /u01/oracle/product/1020/db/admin/rac/bdump/rac1_arc0_3212156.trc:
ORA-16014: log 1 sequence# 39143 not archived, no available destinations
ORA-00312: online log 1 thread 1: '/u02/oradata/rac/redo01.log'
Mon Jul 18 10:04:13 2011
Errors in file /u01/oracle/product/1020/db/admin/rac/bdump/rac1_arc1_3277694.trc:
ORA-19815: WARNING: db_recovery_file_dest_size of 493921239040 bytes is 100.00% used, and has 0 remaining bytes available.
Mon Jul 18 10:04:13 2011
regards,

I am new to mac air. Today i installed (unsuccessfully!) MAPLE16 on my mac book air. Now since it does not work properly (it also does not appear in applications) i decide to delete it. I could not remove it from launchpad . i need urgent help

i am new to mac air. Today i installed (unsuccessfully!) MAPLE16 on my mac book air. Now since it does not work properly (it also does not appear in applications) i decide to delete it. I could not remove it from launchpad . i need urgent help from your side.

Any third-party software that doesn't install by drag-and-drop into the Applications folder, and uninstall by drag-and-drop to the Trash, is a system modification.
Whenever you remove system modifications, they must be removed completely, and the only way to do that is to use the uninstallation tool, if any, provided by the developers, or to follow their instructions. If the software has been incompletely removed, you may have to re-download or even reinstall it in order to finish the job.
I never install system modifications myself, and I don't know how to uninstall them. You'll have to do your own research to find that information.
Here are some general guidelines to get you started. Suppose you want to remove something called “BrickMyMac” (a hypothetical example.) First, consult the product's Help menu, if there is one, for instructions. Finding none there, look on the developer's website, say www.brickmyrmac.com. (That may not be the actual name of the site; if necessary, search the Web for the product name.) If you don’t find anything on the website or in your search, contact the developer. While you're waiting for a response, download BrickMyMac.dmg and open it. There may be an application in there such as “Uninstall BrickMyMac.” If not, open “BrickMyMac.pkg” and look for an Uninstall button.
You generally have to reboot in order to complete an uninstallation.
If you can’t remove software in any other way, you’ll have to erase and install OS X. Never install any third-party software unless you're sure you know how to uninstall it; otherwise you may create problems that are very hard to solve.
You may be advised by others to try to remove complex system modifications by hunting for files by name, or by running "utilities" that purport to remove software. I don't give such advice. Those tactics often will not work and maymake the problem worse.

My auto-lock does not work properly in this new iOS 6

My auto-lock does not work properly in this new iOS 6

Do you have your Assistive Touch on? Per another user in another forum:
Source: http://forums.imore.com/ios-6-forum/240631-auto-lock-not-working-ios-6-a.html. Username: Chambaka
Okay, I did a 'reset all settings' in settings and problems fixed. Hope this can be useful for others.
Edit: it appears that when the assistive touch is on the autolock function won't work while in the home screen, but will work if opening a app. I hope Apple fixes this bug in the next update.
I tried what he said and my auto-lock's working again - so, I turned off my Assistive Touch. Hope Apple fixes this bug soon,

Color Context does not work properly

Hi,
I'm using MII 12.1
ColorContext does not work properly with Lights and Multilights. I did not test other grids.
For every match it shows black colored lights.
Is there a way to solve this problem?
Thanks.

Cemil,
There was a bug in the early versions of 12.1 for color contexting. Color context changes were made in the display template were not being saved. I would strongly urge you to upgrade to SP5 patch 1. However, if you want a very crude way to test if your contexting is working the way you want it to:
1. Export your display template
2. Find the color context section of the xml and change the settings to the desired color coding
3. Import your modified display template
4. Test
I do not recommend this as a short term or long term solution. It is a hack and should be recognized as such. But it will allow to test your configured display template's behavior.
Regards,
Mike

Just upgraded to iOS5 on iPad. Music app and mail does not work properly.

Just upgraded iPad2 to iOS5. Music app does not work properly. When I select a song to play, it plays a different song. Sometimes, it just stops playing songs, other times, it shuffles songs.
Not sure whats going on.
Worked fine using iOS4.3.5.
Synced the iPad to iCloud. enabled mail. It shows under settings that the iCloud mail is setup, but the mail does not appear in the mail app. Not sure whats happening with these functions on iOS5.

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Click the Clear Display icon in the toolbar. Then try the action that you're having trouble with again. Select any messages that appear in the Console window. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message (command-V).
When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Anonymize before posting.

TS1702 When I update to IOS6 on my 4S Facebook does not work properly, the news feed never updates it only says no new storeys and shows a picture of an antenna. When I reset my phone and go back to IOS5 Facebook works fine. What's up with IOS6 ????

When I update my iPhone 4S to iOS six Facebook does not work properly the newsfeed doesn't load properly and I can never see what's going on all I see is a picture of an antenna and a little thing underneath it says no new stories when I reset my phone back to iOS 5 then it works just fine and I don't have any issues so there must be something wrong with iOS six that isn't letting Facebook load properly

No I did not use any unauthorized methods for anything, I simply reset my phone back to factory.
<Edited By Host>

Adobe Creative Cloud (Desktop) does not work properly. The application is blocked : it could not be launch neither stopped. I'm on MAC Yosemite OS, does anyone know how to remove it properly or to force its stop. It does not appear in the launched applica

Adobe Creative Cloud (Desktop) does not work properly. The application is blocked : it could not be launch neither stopped. I'm on MAC Yosemite OS, does anyone know how to remove it properly or to force its stop. It does not appear in the launched applications.

I received no error message. The application was just trying to find applications unsuccessfully.
I am using MAC OS 10.10.1
I tried to uninstall the application but it seems that a kind of deamon is still installed thus providing me to reinstall properly. Do you know where are the elements to remove in order to get my machine just like before ?
Otherwise I would have to reinstall everything and this would be a pain.
Thanks for your help.

Flash player does not work properly on Windows 7 32 bits

Hello,
My flash player does not work properly on Windows 7 32 bits with Firfox and IE8 (lasts versions).
My Flash player version : 10.0.45.2, but I tried with version 9 too, with same problems.
I have tried to uninstall, reboot, reinstall several times, ... witch did not worked.
In fact, it works correctly on some sites, like youtube, but not on some others like :
http://www.dailymotion.com/ => black screen instead of videos, right click gives flash context menu
http://www.canalplus.fr/ => videos does not load, right click gives flash context menu
http://www.myspace.com/ => no audio player, right click gives flash context menu
some games in http://www.kongregate.com/ => black screen instead of games, right click gives flash context menu
I have no problem with shockwave in http://www.adobe.com/shockwave/welcome/
No problem too with flash player on http://www.adobe.com/software/flash/about/
But in the Global Privacy Settings panel (http://www.macromedia.com/support/documentation/en/flashplayer/help/settings_manager02.htm l), I cannot change any settings :
I cannot check boxes,
My changes are not saved.
In most of flash animations, videos, ...,
when I click on parameters, I cannot do anything, even closing.
when I am in full screen mode, the message "press escape to exit...." does not disappear.
Last thing, all those problems was not there when I was on Windows XP, few weeks ago, and appear with my registered Windows 7 premium familly edition, with the same hardware configuration...
Thank you for your help

Hi eidnolb
Thanks for your answer.
This is what I have :
Verify user permissions
I have an administrator account.
I tried (uninstall, install and run) with super-administrator account for same results
Install the most current version.
I am running the latest version (10.0.45.2)
Run the Clean Installer to Fix 3rd Party Flash Player Cleaners
I did not "clean" my computer.
Troubleshoot Pop-up blockers
I have no Pop-up or esle blocker software.
Ensure that Internet utilities do not block Flash Player
I tried (uninstall, install and run) without Avast.
I have windows 7 firewall. I do not know where I can allow ActiveX controls and Flash (SWF) content. I do not see anything relative to ActiveX an Flash in allowed program list.
Fix machine crashes when displaying Flash content
I have no freez or crash.
Using IE, Shockwave Flash Object is Enabled and vs 10.0.45.2
Using FF, I have SWF vs 10.0.45.2 and it is Enabled
I really do not understand !!
Thanks,
Ju'

Image display control scrolling does not work properly when zoomed in

I am using a ROI on an image in the image display control. When zooming into the image to fine-adjust the positioning of the ROI, the image scrolling does not work properly. As far as I understand, the image should scroll automatically when the ROI is leaving the visible area. However, the scrolling behaviour seems to depend on the origin of the Labview panel, not the origin of the image display control, which might require to move the ROI way out of the visible area before the scrolling takes place. In other words: the coordinate system of the image display control is shifted with respect to the true visible image area, depending on where you place it on the front panel. As a consequence, when clicking on a ROI which is in the visible area, but is outside of what Labview thinks is the visible area, it might immediately jump to the left border of the image, making the positioning of the ROI really difficult.
Has anyone noticed this behaviour, and what would be a reliable solution to avoid this?
Dirk

Hello,
no, I am not talking about the tools palette. Just place an image control with some image in it on a new VI front panel. Then, use the rectangle from the tools and select a ROI in the image. If you zoom in (using the magnification glass), and then grab the ROI and move it around, the image scroll with the ROI. So far, so good. If you now place the image control elsewhere on the panel, or add new control above it, resize the panel, etc. , this scrolling when moving the ROI will not work correctly if the origin (0,0) of the panel is far away from the image control.
I have attached a VI for simplicity (although there is hardly any code in it).
If you make a ROI and try to move it down, you will notice that scrolling starts if you move the mouse out to about 10cms below the image (depens on your screen, of course). After that, if you click on the ROI, the scroll bars and ROI might jump up to the upper end of the image. Imagine how annoying this is if you try to finely adjust the ROI position.
I think it is a bug in the implementation of the image display control.
Thanks,
Dirk
Attachments:
scrolling.vi ‏818 KB

Subvi does not work properly when called inside a vi

Hello Every body
thanks for your help. i am using a sub vi for sine signal generation. as a vi it works fine. but when i called this subvi inside another VI it gives some problems. for example timer indicator works properly.it reinitializes as well in the sub vi, but in the main VI it does not work properly. means does not count the time.in the sub vi on the fly i can change the values of frequency and amplitude in real time, but when i use as sub vi, it does not reponse as i change the values in the control arrays.similarly pause and continue works properly in the sub vi, but once again in the main VI, it does not work properly.graph indicator also work properly in the sub vi. but here once again it does not work properly in the main VI.the pause resume indicator also does not blink, when it is continue. in the subvi it blinks very well.generally why the sub vi does not work properly inside the VI?i am sending my VI and sub vis.
any tips would be highly appreciated.
thanks
Regards
Attachments:
vi.zip ‏87 KB

I just want to add some more details to Dan's answer. The subVI is acting exactly like you've coded it. The mistake is in understanding how subVIs work. When you call a subVI (or a function in any other language), you pass some parameters to it, the subVI does it's thing and returns values. the subVI does not accept new parameters from the calling VI until it returns to the caller and the caller runs the subVI again. In your case, you have a subVI with a while loop. You have some front panel control wired to the subVI's stop terminal. When first called, the value is false. So the subVI will keep running until the subVI's stop button becomes true but you cannot change it from main until the subVI finishes and returns so the subVI will never stop. As Dan says, the solution is pass references of front panel controls to the subVI and have the subVI monitor those references for changes and to update references to indicators on Main. You subVI does not need any front panel controls or indicators of it's own.

My Mac App Store on my MacBook Pro does not work properly.

My Mac App Store on my MacBook Pro 15 inch does not work properly. When i go on to the app store, my wi-fi resets and then my app store quits. Why is this? How can i fix this problem? Please Help

Back up all your files, on boot up when you first press the power button, press CMd and r and keep pressing until you get something apart from a apple logo. Then click reinstall Mac OS X or something like that. You may be prompted to insert your disk.
Good luck

Open browser behavior does not work properly

Similar Messages

Maybe you are looking for