Open Captivate 6 projects with Captivate 7 error - loading video

Hi!
I have several projects created by Captivate 6 and now we upgrade to captivate 7.
When I tried to open it with Captivate 7 a Loading video window appears several times, the project is opened but I cannot to do anything because these loading videos are still in process. But nothing happens.
Can you help me?
Thanks!
videos format: .flv

Hello ,
Can you tell me where have you saved your projects ? make sure they must be opened from local computer not from any network location.
Please open a blank project and check are you able to add any video in it .
Can you tell me the eaxct version of Adobe Captivate 7 you are using (Go to Help > About Adobe Captivate)
Thanks and Regards
Himanshu Satija

Similar Messages

I updated my Itunes to the latest version(11.1.4) and it isn't running on my laptop. The current OS is a W7 ultimate 64bits, when i try to run it, opens a message box with the following error message: error 7 (windows error 1114) . What should I do?

I updated my Itunes to the latest version(11.1.4) and it isn't running on my laptop. The current OS is a W7 ultimate 64bits, when i try to run it, opens a message box with the following error message: error 7 (windows error 1114) . What should I do?

Try the following user tip:
Troubleshooting issues with iTunes for Windows updates

Trouble installing Creative Cloud Desktop. After running the installer the dock the opens up is blank with a blue dotted loading emblem and will not do anything?????. New member here, thanks for the time.

After running the installer the dock the opens up is blank with a blue dotted loading emblem and will not do anything?????. I attempted to quit the install and restart but it produced the same result. New member here, thanks for the time.

Avanmanandfriends please see Creative Cloud app doesn't open and hangs on spinning progress wheel - http://helpx.adobe.com/creative-cloud/kb/creative-cloud-app-doesnt-open.html which discusses how to resolve your current error.

Cannot seem to open a new project with a height less than 100px

Hi
Surely there is not a minimum limit on the size of project I can work with in Captivate. I'm trying to open a new project that is 968 x 30 px but it will not let me and defaults back to 100px height.
Is there a way for me to achieve this or is this a flaw in Captivate? I'd be suprised if theu have set a limit on minimum height!
Cheers
D

Hi there
Not sure if it's a "flaw", but it's been that way for as long as I can recall. Keep in mind that Captivate is really designed for capturing screens and creating things that are substantially larger than 100 px.
If you disagree with this and feel it should change, please consider submitting a Wish Form to ask for a change. (Link is in my sig)
Cheers... Rick
Helpful and Handy Links
Captivate Wish Form/Bug Reporting Form
Adobe Certified Captivate Training
SorcerStone Blog
Captivate eBooks

Open task sequence log with cmtrace on error

Hi,
Is there a way to make an SCCM 2012 R2 task sequence automatically open the smsts.log (with cmtrace) when an error occurs?
J.
Jan Hoedt

I would agree with Torstren. The difficult piece would be determining where the smsts.log is, based on where its at in the task sequence. Once you have that it wouldn't be too difficult to place those steps in the
Gather Logs and StateStore on Failure group. The catch will be, even if CMTrace is open, the machine will still reboot after 15 minutes unless the cmd prompt is also open.

Opening older Premiere project with CS3 - no sequence! Like it was deleted

I am not sure what exact version of Premiere was used but I think it was 6.0 or 6.5. Very simple, few minutes and single time line/sequence.
When this is opened in CS3 it opens the project normally (asks for ".prtl" or title files), shows the Bin with all the files but there is no sequence - no edited content what so ever. The whole thing is gone.
The .prproj file has over 170 XML tags linking the .avi files and the rendered videos. I have tried to create new project with same aspect and PAL and then "import" but it does not give the sequence/time line which is missing.
Any ideas?

You will also find links to many
free tutorials in the PremiereProPedia that will quickly show you how things are done in Premiere Pro.
Cheers
Eddie
PremiereProPedia (
RSS feed)
- Over 300 frequently answered questions
- Over 250 free tutorials
- Maintained by editors like
you
Forum FAQ

Issues opening AE CC project with CS6 despite the "save as CS6" option

Hello all,
I wish I wouldn't have to bother anyone with my noob question but I tried it all. I've been through the FAQ, the Search tool, lost myself on the Net for hours and... I can't find my problem resolved anywhere. It makes me feel sooOOo lonely.
So, I know "After Effects CC (12.0) has a feature to save projects in a format that can be opened by After Effects CS6 (11.0)".
BUT, as I used that precise feature (as well as the XML feature) and still have to face the impossibility to open my project file on CS6, I wondered if... anyone could help me to find an explanation at least. Or maybe even a solution.
I know about the pt_OpenSesame script, but it seems to be less efficient than the feature "save as CS6" itself (as said by Adobe on several forums), and... it costs money
Any idea why this "save as CS6" feature could possibly not work ? Any link to allow me to understand ?
Could it be caused by the difference in OS updates ?
Thanks a lot in advance !
Config :
From recent MBP with Lion 10.8.5 and CC (12.2)
To less recent MBP with Lion 10.6.8 and CS6 (11.0)
Message :
"The file you are trying to open has been created with AE v12.2 (Macintosh 64) and can not be open with your actual version of it" (sorry it's a translation from french, not sure it is totally accurate)

Hello Todd,
Thank you for taking time to answer me.
I am trying to open a copy, not the original file. This copy is named after a new name, totally different from the name of the initial project.
As I said it to Szalam, the original project is saved in a AE CC 12.2 version and the copy is (not) opened on a AE CS6 11.0.4...

How can open InDesign CC project with CS6 after trial has expired?

Created a project with an InDesign CC trial. Trial expired, would like to continue working on it with my registered CS6 version of InDesign. Problem is that the project will not even open due to a lack of backwards compatibility. In theory I should be able to just open CC and save my project in a format compatible with CS6, problem is that since my trial has expired this is not possible. Completely stuck. Even tried to uninstall and re-install after hearing about a trial restart offered back in January, not working. Any ideas?

That would be great, except for the fact that all of my project files are on one machine. So that would not solve my issue. Unless I am unaware of a way to move my entire project without the original files

Can't open motion 4 project with motion 5 !

When I open a Motion 4 project with Motion 5 I get the followwing message : Le document « origine.motn » n’a pas pu être ouvert.
meaning the document can't be open ! Any ideas ?

There is something wrong with the file. Normally Motion 5 can open Motion 4 project files. Open in Motion 4, Save As, try again.

Can I open a new project with 5 or 10 bins already in the browser?

Hi,
I'm wondering if I have to create and name five to ten bins every time I open a new project. Or is there a way to set FCP preferences to have a certain amount of bins and their names open every new project?
Thanks

You could however, create a "template" project. If you new the bins were going to be named the exact same thing for every project.
Just create a project, set up your bins and save as "template.fcp" (or whatever the fcp extension is, I can't remember right off hand.) Keep that somewhere you can find it, and then open it up and save it as a new project name anytime you need a project with that set up.
I do this for my projects because there is another editor that I work with that doesn't keep his browser very organized, so it was hard for me to figure out where he put everything when it was my turn to come in and finish the edit. So I created a template that had bins called "Graphics" "Animations" "Music" "Sound efx" "Sequences" etc.
Helps keeps things orderly.
Hope that helps
Chris

Opening CS6 cloud projects with CS7,8,9 etc.

So you opt for the Creative Cloud Membership subscription option.
In two or four years you want to open a Permiere Pro CS6 project and change it. If you didn't have only the cloud option, but had the perpetual license, you could just open it with the version it was created with. But what if CS8 is now the current version? You are still on the cloud option and don't have CS6. Will you be able to open the project?

Wil Renczes wrote:
We're always backwards compatible - the cloud is irrelevant here, it doesn't matter where the project is stored. When we encounter an old project file, you'll be prompted to convert the project to a new CS7/8/9 version, just as you get now when attempting to open pre-CS6 projects.
Cheers
I wasn't aware of that.
Thank you.

Just had Javascript update done and now Firefox won't open,,,keeps coming up with XML Parsing error not well formed. how can I get rid of this?

also awindow pops up NS error XPC Bad convert JS cannot convert JAVASCRIPT argument arg 4 (NSL window watcher open window)
== This happened ==
Every time Firefox opened
== just today ==
== User Agent ==
Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.0; (R1 1.5))

There's a lot there, so I'll start with the parts I can answer quickly.
The "ACL found but not expected..." messages can be safely ignored, so says this article
http://docs.info.apple.com/article.html?artnum=306925
(look below all the "SUID" examples)
I had changed my Desktop image earlier but when the "Installing 1 item" window came up it changed back to the back ground that you first see on your desktop after installation.
Leopard installs updates a bit differently. If it's simply an application that does not change system files, it installs them like before, without having to restart. If the update is to the system, then you must immediately "restart," It then goes to that stars and purple screen to perform the installation. Before, it would do the installation while you still had control of the Mac and would prompt you to restart when it finished the installation. This change probably make things more secure and reliable, because you aren't allowed to do other things on the Mac while system updates are being installed.
Please post back with the remaining point of concern.

How do I open GarageBand 09 project with the Amp and Pedals Plugins?

My client sent me via YouSendIt online me his GarageBand 09 v5.0.1 project to tune up Logic Pro 8.0.2. Upon opening the project I receive the message, "Warning! This Project was created by a newer Logic Pro version. This may cause problems. Please update Logic Pro." After I hit "OK", a message says, "Logic Pro: Plug-in “Pedals” not available!, and then "Logic Pro: Plug-in “AmpSim2” not available! Where can I download or get the update that I need for Logic Pro with the Pedals and AmpSim2 Plug-Ins and when will it be available? What other version of Logic Pro is there?

Quoted from Foxboy71:
"aren't the pedals plugs and these new gizmos AU Plugins? Then they should be able to be put into Logic somehow. If not, how did Apple implement them into Garageband (and why!)?"
The folowing excerpts were taken from a Sound On Sound article at http://www.soundonsound.com/sos/aug06/articles/applenotes_0806.htm
"This theory actually plays out, even at the moment, when you consider that every update to Logic includes features to make it compatible with songs created in the latest version of Garage Band. And some of these features have actually benefited the high-end user, such as Apple Loops, in a rare example of the low end driving the high end, as opposed to the other way around."

Creating Open Directory Replica fails with Server Admin Error Value 1127

Hallo,
I have seen a lot of similar threads here and they were helpful up to a certain point, but in the end, they did not solve my problem.
Currently, it comes down to this. The Server Admin Error message ist really meaningless and I could not find a single for the error value on the whole wide web. As such, I switched to the command line versions of the tools involved to geht more meaningful results. It worked. Specifically, creating a replica of an openldap master means using slapconfig.
When executing
slapconfig -createreplica master.ourdomain.com diradmin
as root on the prospective replica machine, I get the following error message:
ssh command failed with status 127
That command is not allowed with the root account via public key authentication.
That makes perfect sense to me, but how is it meant to work then?
Executing slapconfig as admin tells me that this tool is to be executed as root. On the other hand, root login via ssh is not allowed in Mac OS X by default, which seems fine to me. I even changed /etc/sshd_config on the Open Directory Master machine to "PermitRootLogin yes". However, neither reloading ssh using launchctl nor restarting the whole server made this setting operational. Trying to login from command line as root still tells me:
root login is not permitted to this machine via public key authentication.
While this is the current state where I need help urgently, I changed some other things before. I tell about to exclude these issues as possible reason of failure. I got this message for quite a while:
Replica Setup failed : This machine does not have a valid computer name
I was sure, this machine meant the target machine, the open directory master, because the domain had changed there once before I had taken over responsibility as an admin in this environment. And in fact, changeip disguised an issue there. The command proposed by changeip to fix the situation did not seem appropriate because this machine is multihomed with a public and a private IP adress. Proper name resolution is available for both interfaces including reverse lookup. I dont like this setup, but it was the only way to get mail service running smoothly. Running changeip on the machine itself using these arguments
changeip /LDAPv3/127.0.0.1 internalIP internalIP old.ours.com current.ours.com
reported success in updating password server, open directory, both interfaces, hostconfig (which in fact did not change) and samba. It reported an issue with kadmin which is related to Kerberos (we dont use Kerberos yet).
Changing the hostname of the server using changeip did not solve the issue. I then found the hint to check with scutil. This showed that the Hostname was not set on the prospective replica machine. (A question aside: in how many place is the hostname stored? The traditional /etc/hostname has gone, but seems to be replaces with several other configuration files and databases. I cant see this as an advantage). Setting the hostname using scutil worked fine. However, it did not solve the problem either. At least, slapconfig now started to complain about not being able to log in as root instead of failing from the start.
I also checked all log files on bboth machines that might have to do with openldap, as there are /var/log/slapd.log, /var/log/system.log and /Library/Log/slapconfig.log. I also checked the log of th layer on top of openldap which is /Library/Log/DirectoryService.server.log. None of them revealed anything noticeable beside a lot of of entries that I have googled in the last few hours and which all dont seem to be associated with the problem in question.
I will take a break now, but I have to fix this until tomorrow and I hope to get the ultimate hint from you, dear reader.
Thanks and bye, Christian Völker

ssh command failed with status 127
That command is not allowed with the root account via public key authentication.
Initial OD replication takes place via 'ssh'. If you have 'sshd' configured on the OD Master to authenticate with public keys then the OD replica will not be able to communicate with the OD Master via 'ssh'. You must configure the OD Master to use 'ssh' with password authentication and root login enabled.
Demote the replica back to standalone. Stop any services that you may have running on the primary network interface. Then stop any services that you may have running on the secondary network interface. In the 'Network' System Prefpane remove the IP number from the secondary interface then deactivate the secondary network interface.
Assign the private IP address and hostname that you wish to use for the replica to the primary network interface. Assign the 'public' IP number to the secondary interface. Check the DNS to see that the IP address and hostname for the primary network interface resolve both forward and reverse for the hostname of the replica that you have chosen. If it does not, fix your DNS before proceeding.
In the 'Sharing' System Prefpane, change the name of the machine to the hostname (server.domain.tld) of the replica that you have chosen. Then use 'changeip -checkhostname' to see if the IP/hostname matches. Fix it if it doesn't.
Then configure the /etc/sshd_config file on the OD master like this:
\# Authentication:
PermitRootLogin yes
PasswordAuthentication yes
PubkeyAuthentication no
and the /etc/ssh_config file on the OD replica like this:
PasswordAuthentication yes
PubkeyAuthentication no
Then from the OD replica as the 'root' user issue:
slapconfig -createreplica <ODMasterIPorFQDN> <diradmin user>
Make sure that the 'diradmin' user's password contains only alpha-numeric characters -no 'option-characters' or symbols, change it first if it does. Once the process completes, reactivate the secondary interface for the 'public' IP and check the configuration of services that will be using that IP, then start your other services. Secure the 'ssh' service on both machines to disable password authentication and 'root' logins.

Opening an old project with i-movie

I've saved my project into an external HDD. After reinstalling the new Mac OSX 1.4.3 I restored the project. Now when I try to open it i-move tell me:
Documents not assigned and it show me the list of all the clips. What have I to do ? I've tried to restore but the message is the same. I've tried to drag and drop the single clip but it show me the message: to large than 2 Gb, use QT to make a smaller file.
Thank you
Best regards
Power Book G4 Mac OS X (10.4.3)

You can split the video into <9 min 27 sec chunks which iMovie 1-4 can import with QT Player Pro:
Open the big clip and move the slider to the very beginning of it. Press Shift and move the slider about 9 min forward to make a selection. Choose Edit/Cut. Open a new player and choose Edit/Paste. Export as PAL or NTSC DV stream with 48 kHz audio (I guess save as reference movies would also be OK and a lot faster). Repeat. Then import the smaller segments into iMovie.
Oak Street Software has an AppleScript that can do the splitting automatically but unfortunately QT 7 broke it.
iMovie 5 can import big clips so this isn't necessary with it.
See also (I haven't yet tried the SW mentioned in the last link -- at least one of them works in QT 5):
http://discussions.apple.com/thread.jspa?threadID=267009&tstart=0

Open Captivate 6 projects with Captivate 7 error - loading video

Similar Messages

Maybe you are looking for