OPEN CATALOGUE PROBLEM

just loaded photoshop elements 4.0 after a couple of years. All ok but cannot access organize pictures. get this box
OPEN Catalogue there was a problem opening the catalogue name "my pictures" psa. Another user or app may have been open (NOT SO) or one or more files may be missing or out of date (MOST LIKELY) or damaged.
THe ODBC data source reported the following error internal error data not found....attempt to compact or recover try again. (TRIED THIS AND DID NOT WORK)
pLEASE ADVISE.
THANKS.
jIM

See if this helps:
http://forums.adobe.com/thread/457409

Similar Messages

Error message: impossible to open catalogue due to unexpected error

Hello eveyone,
I have been using LR 5 for quite some time.
Working just fine.
I got a new I Mac in replacement of my old one but since I changed I cannot access my catalogue (xxx.lrcat) usually located in a special dedicated desk external hard drive.
When I tell LR to load this catalogue, I get the following error message:
"impossible to open catalogue due to unexpected error"
Anybody knows that the problem could be?
Thank you for your help...

click here Photoshop Lightroom
and look for your post.

ITunes will not open in Windows 7 for one User. All I get is the Licence Agreement pane and when I click YES nothing further happens. I have set up a second user and iTunes opens without problem in that User window.

Clearly something is blocking the main user(administrator) from opening the iTunes programme and I cannot find a solution.

Many thanks for your reply. Yes I carried out the suggested procedure in safe mode , which did not resolve the issue and so this is what led me to set up a second User account. iTunes opened without problem in this second account and so I looked at the User-specific troubleshooting but I just could not locate the iTunes Preference files no matter how much searching I did.
I also tried uninstalling and re-installing but the problem persists. Would be very grateful for any further advice.
ollie66 Gorran Haven, Cornwall, England.

Open NAT problems with Xbox One .

When I first got my 1900ac I used Media Priortization to get an open NAT for Call of Duty Advanced Warfare on my Xbox One ; prioritizing the Xbox . It worked fine for about 6 months until I changed cable/net provider to Nextech in Ks. This company uses the 1900ac to hook up it's system for all it's customers ( since I already had one they're using mine ). Unfortunately I'm unable to get an open NAT in this game anymore ; I've tried just about everything , NAT forwarding , triggering , Media Prioritization . Nextech support & Xbox Live support , useless . Tried Portforward . com , nothing . Forwarding port 53 cuts off net connection & doing the static ip change for Xbox didn't help . Almost everything I've looked at seems out of date & I'm at my wits end . It would seem by now Linksys should have solutions available , any ideas ?

Thank you chin_pamz13 for your response . I tried to check if my modem had a public or private ip address but I'm not sure how to do that ; I've read about double NAT's elsewhere . Regardless , I think I've finally found a solution that seems to be working so far . I went to the website " tech - recipes . com " & found an article , " Xbox One open NAT " by Aaron St. Clair . I tried his first suggestion about port triggering , with extra ports I had'nt seen before . That did not work for me so I followed his instructions for putting the Xbox in the DMZ & it's working ! I think my problems from before were the result of improperly setting up the static ip address for my router & Xbox . Previous instructions had me changing the ip in the console along with the router ; Aaron said not to do so in the Xbox , let the router do the work it's supposed to do & make sure the settings in the console are on automatic . In the router at the DMZ , I was'nt sure how to proceed , but at the bottom is a section labeled DHCP reservations list ; clicked on that , saw XboxOne , clicked on that & it filled out the MAC address above for me . Then I went to the Xbox network settings , advanced settings & clicked " automatic " at ip address , subnet & DNS . I checked mutiplayer connections & did the " hold bumper & trigger buttons " trick & finally got an open NAT ; fired up CoD Advanced Warfare & got the open NAT there also . I may have screwed up when I did the port triggering but since the DMZ fix seems to work I'm going to leave things alone . Hope this helps others with open NAT problems .

Motion 3 won't open citing problems with "Ozone plug-in" - Any suggestions?

Motion 3 won't open citing problems with "Ozone plug-in" - Anybody ever experienced this? I tried dumping all motion app's and reloading but same thing happens. Any ideas? Thanks.

Motion 3 is part of Final Cut Studio 2. There are many threads on these boards about trying to get those apps to install properly on OS versions above 10.6.8. Here's one such thread. A search will bring up additional ones.
Russ

Hello i can't open applications of my iPhone in iTunes , other ones (information, photo , books etc) open without problem. i've synchronized phone with iTunes - was no problem, quick time is works. thank u

hello
i can't open applications of my iPhone in iTunes , other ones (information, photo , books etc) open without problem. i've synchronized phone with iTunes - was no problem, quick time is works. thank u
Tatyana

You have Acrobat Pro on your system. It will try to open PDFs, and of course it will fail. You must uninstall it. Then, you will need a PDF reader. So install Adobe Reader. That seems quite simple, but perhaps something is wrong. If anything goes wrong with these two steps (1) uninstall Acrobat Pro (2) install Adobe Reader, then please let us know the details.

IPad mail sending one page PDF documet as a picture. This picture is not viewing for other people who email open. this problem is from iBooks and from Pages. (if I sending one page document from Pages from iPhone is ok - PDF)

iPad mail sending one page PDF documet as a picture. This picture is not viewing for other people who email open. this problem is from iBooks and from Pages.
(if I sending one page document from Pages from iPhone is ok - PDF. If I sending one page document from iPad is mistake. )

Turn off rich text in your email signature. Delete images too, if any.

Open GL Problem

I've seen many messages about CS4 and Open GL problems but not this specific one. With Open GL support turned on I get a box right in the middle of the image at the very top. I'm running the latest nVidia drivers for my card (8800GT with driver v180x48 dated 11/19/08). I have the problem with SLI both enabled and disabled. When I disable Open GL support and re-open the image everything works fine.
So far, PSCS4 is running fine except for that. Which means I can't rotate the canvas, but that isn't a show-stopper for me. I assume this means I'm waiting for nVidia and Adobe to resolve Open GL issues. But any other advice would be appreciated.
MSI 650i motherboard, Intel E6750
4GB Corsair XMAS RAM PC-6400
Western Digital 640GB SATA-II HDD
Dual EVGA 8800GT video cards in SLI
750W Corsair PS

no 3d functionality with CS4 so I upgraded my graphics card based on the following requirements:
http://www.adobe.com/products/photoshop/photoshop/systemreqs/
Some GPU-accelerated features require graphics support for Shader Model 3.0 and OpenGL 2.0
Using these criterion I found this card and bought it:
The ATI FireGL V3350 features full Shader Model 3.0 support and scalable ultra-threaded architecture with true 128-bit floating-point precision. Both OpenGL 2.0 and OpenGL shading language are supported in the unified drivers for the FireGL V3350, as is Microsoft DirectX 9 with Dx9 HLSL. Drivers are available for Windows XP, Windows XP64, and Windows 2000, as well as Linux 32 and Linux 64. Specs here:
http://ati.amd.com/products/workstation/techspecs2.html
Upgraded to the Feb 2009 drives and still no 3d support. Any suggestions..return the card? What card really works and cost less than $250?

Question: is it possible to recover an InDesign file that will not open. the problem came by copying a pictogram vector illustrator to indesign. My file indesign does not want to open it now. Thank you

Question: is it possible to recover an InDesign file that will not open. the problem came by copying a pictogram vector illustrator to indesign. My file indesign does not want to open it now. Thank you

You can try the script mentioned in #1 here: Re: InDesign 6 is crashing when attempting to open a particular document. All others are opening OK.
Here's how to install a script: http://indesignsecrets.com/how-to-install-a-script-in-indesign-that-you-found-in-a-forum-o r-blog-post.php

LR2.2 will not open catalogue after upgrade

I have been using LR2.2 (OS X - latest, on Unibody MacBook 2.4Ghz) for a few weeks, and found it an improvement. I have put my 1000 Christmas photos on it for the moment, in a temporary catalogue.
I have just tried to open my old LR1.4.1 catalogue, containing about 30,000 images. It appeared to upgrade the catalogue OK, but failed to do a backup (quoting disc space or permissions as possible causes, both of which are untrue as far as I can see). Then it said it could not open because of a problem switching modules.
I have deleted it and tried again a second time, allowing LR2 to create its own new folder for the new cat, but it still doesn't like it.
For a x.2 release, I am rather unimpressed. If I cannot open my old catalogue with all its keywords and collections, there is no point in upgrading to LR2.
Any solutions, or do I just save money and stick with what I have?
best
Nic

I can't be expressing myself very well. LR is completely unable to do anything. It has not frozen: I still have File-Edit-Window-Help menus which pull down immediately. Mouse-rollover of the modules make them change colour, and the double monitor panel actually sort of works.
But apart from that I can't get any response. (Note I have been using LR2.2 with a new catalogue for a few weeks, and have used LR1 from the start, so I know how to use the software, broadly speaking.)
Tab does nothing. And there is no way of getting further than the screen shots I just posted.
I will look into deleting the plist file.

Photoshop Starter - open catalogue error

Hi, I have recently tried downloading the Photshop Album Starter Edition 2.0 software and installed it successfully (according to the wizard). When I start the application for the first time, I get a message saying that there was a problem opening the catalogue with the ODBC driver returning a message about an invalid connection string attribute.
I am prompted to attempt to compact and recover the catalogue which I do and to reinstall the software - which I do. The problem then returns when I open the application.
Any ideas ?
Andy

Thanks Colin,
I have tried Jims advise but not resolved the issue.
Jim suggests:
* using file / catalogue /report - cant do this as I cant get into the application
* reinstall (or install new version)- this doesn't apply to the starter edition where I have taken the latest version from the web
* install Windows Servicepack 2 - done this and still get the problem. I have also tried downloading the MDAC update but after downloading I get errors running it.
Any other ideas ?
Andy

Itunes wont open, encountered problem and send error report

Everytime i try to open windows, it says that itunes has encoutered a problem and needs to close. it has the send error report message too. please someone help

Meaghan, I already responded to your topic. Plus, it is simply not good to bury your post in other people's topics, and just for the future, if you have a problem without a good answer, don't post what has already been said in a thread. I know, the discussions take a little getting used to, but it is easy to get the hang of it after a couple of visits. You'll get it sooner or later. I know you will.

AP Invoice Open Interface Problem

Hi,
Im trying to load invoices through the open interface for AP. I am getting some invoices in but for some reason a large volume of the invoices are being rejected. The open interface is not logging any errors in ap_interface_rejections or on the interface report. It just ignores them. I can see in the log that 900 invoices got selected but only 300 created. HAs anyone had this problem and if so how to get around it?
Thanks
Keith

Hi Keith,
If this is a production environment I strongly suggest you raise an SR for this issue, as there are some known bugs for rejection of invoices during Open Interface run and Oracle support reps will be able to better help you.
Please see:
APXIIMPT: Payables Open Interface Rejects Invoices With Reason - INVALID_GLOBAL_CONTEXT (Doc ID 1548209.1)
Payables Open Interface Import is not showing some of the Rejected Invoices in the Output Reports. (Doc ID 1476796.1)
Thanks &
Best Regards,

Open cursors problem- j2ee + oracle 10g

Hi,
I am using EJB on sunOne application server 8.1., Oracle 10g DB.
EJB container connects to Oracle DB through a set of connection pools.
BMP for all entity beans.
I have about 160 PL/SQL functions that make up the business logic of the online application. everytime the application runs, I get an increasing number of open cursors, including some of the ones that are explicitly closed within PL/SQL (inspection with sys.v_$open_cursor).
I made sure all CallableStatements, PreparedStatements, RecordSets within the beans are closed and set to NULL. All PL/SQL functions use explicit cursors, so every select statement is managed within a cursor which is explicitly closed when the function finishes with it.
From v$open_cursor, I identified the sessions with the cursors still open, and issued (ALTER SYSTEM KILL SESSION �sid, #serial�) for each of the sessions (this is done via a PL/SQL function for all inactive sessions).
These sessions have state INACTIVE, and wait_class IDLE. This has Killed all sessions, but I was not able to use the application anymore. I suspect by killing those sessions we have also caused the connections between EJB container and the Oracle DB. The only way to use the application now is to stop and restart the sunONE domain � this is very inconvenient.
Has anyone encountered a similar problem? any suggestions to reduce or eliminate the open cursors number? Please help.
Thank you all

Maybe you can try to have a smaller steady-pool-size and idle-timeout-in-millis for your connection pools.
Also, if that's at all possible, have smaller number of connection pools being shared by more apps.
Just my 2c.
thanks.

Amount of open cursor problem

I am trying to display a tree-like data with a varchar2 field called ancestor indicating its family nodes, e.g. 1:2:5:16. A quick solution would be recurssion:
procedure data_list(id in number default null) as
cursor c1 is select * from table1 where ancestor is null;
cursor c2 is select * from table2 where get_parent(ancestor) = id;
-- get_parent(varchar2) is a function return parent id of current data.
if (id is null) then
-- display root nodes
-- open c1 and print out data
-- then recursively call itself to print out its children
data_list(id);
close c1;
else
-- open c2 and print out data
-- then recursively call itself to print out its childen
data_list(id);
close c2;
end if;
end data_list;
======================
As you notice, the problem is that if the tree is too high (or too deep) the amount of cursors being open simultanously might be huge, which will definitely degrade the performance of the server, especially under multiuser environment.
Does someone here have better solution for this problem?
Thanks.

You probably want to start by looking into Oracle's hierarchal query support with the CONNECT BY clause and the SYS_CONNECT_BY_PATH function. Grabbing a quick example from the Oracle SQL Reference http://download-west.oracle.com/docs/cd/B10501_01/server.920/a96540/functions121a.htm#1038139
SELECT LPAD(' ', 2*level-1)||SYS_CONNECT_BY_PATH(last_name, '/') "Path"
   FROM employees
   START WITH last_name = 'Kochhar'
   CONNECT BY PRIOR employee_id = manager_id;
Path
/Kochhar
   /Kochhar/Greenberg
     /Kochhar/Greenberg/Faviet
     /Kochhar/Greenberg/Chen
     /Kochhar/Greenberg/Sciarra
     /Kochhar/Greenberg/Urman
     /Kochhar/Greenberg/Popp
   /Kochhar/Whalen
   /Kochhar/Mavris
   /Kochhar/Baer
   /Kochhar/Higgins
     /Kochhar/Higgins/GietzNote that hierarchal queries work very well when you have tree data. If you actually have a graph, it starts to get more complicated.
Justin
Distributed Database Consulting, Inc.
http://www.ddbcinc.com/askDDBC

OPEN CATALOGUE PROBLEM

Similar Messages

Maybe you are looking for