Open .CDR files on Illustrator?

Hi there,
One of my assignments is to create something on Adobe Illustrator, but since I have CorelDRAW, I just used it instead.
Is it possible to open a .CDR file on Adobe Illustrator (CS5+)?
Thanks for your help!

It depends on what version of coreldraw you have. Pdf may work as well, but you will need to test them formats and see which works the best. Also be prepared for errors and needing to change settings for the format to work, assuming it can.
That all the information I can give for now but if you goto the illustrator web page and coreldraws web page, they should provide what versions of the opposite it can open.
For example if coreldraw is older then illustrator should open the coreldraw format, if illustrator is older then coreldraw should be able to open the illustrator format. It is very rare to see a version come out in the same year that both would match, usually one needs to come out so the other can write the code needed for the others format.

Similar Messages

Opening CDR file - Extremely Fatal to CS6 64-bit apps

I'm trying to get down the bottom of what's causing an extremely serious error in the 64-bit version of Adobe Illustrator CS6.
Adobe Illustrator can open CorelDRAW .CDR files, to a certain extent. The .CDR files need to be saved down to version 9 or 10 compatibility. One of my coworkers just ran into a really bad Illustrator CS6 crash caused when opening a .CDR file. This is a crash I had to endure on my own new system a couple months ago.
After Illustrator CS6 64-bit crashes it simply refuses to launch again. It crashes and closes. Rebooting doesn't help. Deleting the AI prefs file doesn't help. Worse yet, the crash basically hoses all of the CS6 64-bit apps that are installed. The 64-bit version of Photoshop CS6 crashes when opening a file.
The last time this happened my only recourse was to do a "factory reset" on my computer, basically wiping the hard drive and reinstalling Windows 8 Professional in a clean state and then going through the very long, slow process of downloading and installing the CS6 apps from the Creative Cloud.
Does anyone in this forum have any experience with this particular kind of crash? Are there any possible alternatives that might fix this error besides wiping the hard drive and starting over? This bug is pretty badly timed. Gonna have to go through all the download/install process stuff again when the new CC apps are released.

The bug is unpredictable. Once the bug has occurred Adobe Illustrator CS6 64-bit will no longer launch. Rebooting and deleting the aiprefs file doesn't work. Additionally the bug also permanently affects other CS6 64-bit applications. Photoshop CS6 64-bit will launch, but it crashes when opening any file. After Effects and Premiere Pro crash at launch. No third party plug-ins were installed on this computer.
Affected computer's hardware:
Dell XPS 8500 Desktop
• Core i7 3770 Quad Core 3.4GHz
• 16GB RAM - Dual Channel DDR3 1600MHz - 4 DIMMs
• nVidia GeForce GT640 1GB GDDR5 SDRAM
• 2TB 7200rpm SATA 6 Gb/s Hard Disc
• DVD-R/W Drive
• 19 in 1 media card reader
• Windows 8 Professional 64-bit
When this bug affected my own workstation a couple months ago, I tried to uninstall Adobe Illustrator CS6, download it again and then reinstall. Illustrator CS6 64-bit still refused to launch. The other 64-bit apps wouldn't launch either. So I ended up wiping the hard disc, reinstalling Win 8 Pro clean and downloading/reinstalling everything and just being careful to not open any .CDR files after that. My workstation is a little better equipped (Core i7 3770, 24GB of RAM, BD-RW drive, nVidia GeForce 660GTX, Intel SRT solid state drive with SATA 6gb/s 2TB HDD).
Previously I did run into problems when opening CorelDRAW .CDR artwork that was larger than a standard letter sized page. I would get hit with a dialog box saying "the file appears to be corrupt." I'd end up making CorelDRAW save the artwork into Adobe Illustrator CS5 format and then opening it Illustrator. Once my Adobe apps got hosed by a certain .CDR file I simply stopped trying to open any CorelDRAW files directly in Illustrator at all. Didn't want to go through the long process of reinstalling everything from scratch again. Unfortunately my coworker didn't remember the details of my experience. So now we're dealing with it on her new machine.
My coworker said she thinks she remembers which .CDR file caused Illustrator CS6 64-bit to crash. Here's a Dropbox link to it:
https://dl.dropboxusercontent.com/u/86940762/V130520-1%20CC%20expo%20center%20billingsley% 20ford%20FS.cdr
Warning: I do not recommend other users to try opening this CorelDRAW file within Adobe Illustrator CS6. I'm sure not trying it on my installation!
This particular .CDR file doesn't have any active type in it. But it does feature some strange clipped gradient effects. I think some of this artwork was originally created in Illustrator and then saved in CorelDRAW. I'm wondering if there is some sort of way Corel tried to reinterpret the artwork that caused Illustrator to lose its mind when reopening it. If memory serves correctly I was opening some similar Illustrator-generated and then Corel-saved art in my own copy of AI CS6 64-bit when it crashed.

Can not open any files with Illustrator CC on windows 8.1

I can not open any files in Illustrator CC. It comes with an error message and shuts down. I run with the Danish version and windows 8.1. - help?!!

I just get this:
"Adobe Illustrator CC has stopped working - One problem was the fault of the program ceased to function properly. Windows close the program and notify you if a solution is found"
not useful..

Can't open EPS files in Illustrator CS3 since installing CS6

I'm on Windows 7, and need to be able to open .eps files with Illustrator CS3. Since installing CS6 yesterday I'm no longer able to associate EPS files with Illustrator CS3. When I right click an eps and go to "open with", only Illustrator CS6 is listed. When I "choose default program", only Illustrator CS6 is listed. If I "browse" and manually select the Illustrator CS3 executable, it still defaults to CS6. Using the same process with .ai files works fine, there is no issue. However these .eps files are not behaving like .ai files. If anyone could suggest a solution to my problem I would be very grateful.
EDIT:
Also, attempting to set the default program through the "set associations" control panel doesn't work, after selecting the Illustator CS3 executable it still shows up as CS6.

Some research solved my issue. Need to create a registry entry for Illustrator CS3 (v13) in the eps file extension section of the windows 7 registry.
1. Navigate to:
HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\FileExts\.eps\OpenWit hProgids
2. Create a new "binary value" key called "Adobe.Illustrator.13" (leave the value blank).
That's it. CS3 is now a valid choice for eps files. Hope this helps anyone who has the same issue.

How to open .dwg file in Illustrator 6?

I am unable to open .dwg files in Illustrator 5 & 6 on my new Macbook Pro (OS 10.7.4). I get an error message "the plugin cannot be initialized for the lack of the initialization file "ADINI.DAT"." This computer had AI transferred using Apple's Setup Assistant.
I can open the same .dwg file on an different MacBook Pro in both AI 5 & 6 (the AI installation here was by disk).
It looks like I may need to remove & reinstall AI on the newer computer. But before I do that I'm wondering if there's an easier way. What do I need to do to be able to open .dwg files using AI6?

Reinstallation is the simplest solution.
You may want to be a tad clearer in the future regarding version numbers. It'll simply help get answers faster. Illustrator version 5 and version 6 are drastically different than CS5 (version 15) and CS6 (version 16).

Opening eps files in illustrator cs3, created with GMT

I have been using previous versions of illustrator (10.0, 11.0, 12.0) to edit my eps files created with GMT (Generic Mapping Tools) with no problem.
I have just recently installed CS3. When I open these GMT generated eps files the colors are changed and lines are shifted when compared with the original eps image (which i can open and view in GSview, a postscript viewer, with no problem).
My current work-a-round is to open these eps files with illustrator 11.0 (which I have installed on another computer), save the file as an AI file (version 11.0), and then open this file with illustrator CS3. The file then displays correctly.
My question is this, what has changed with the CS3 version of illustrator that does not allow me to open eps files created with GMT (Generic Mapping Tools). Older versions of Illustrator open these files with no problems.
My OS is windows XP - 64-bit. My older computer running illustrator 11.0 is winXP - 32 bit. I bought the newer Adobe Creative Suite 3 Design Standard because I was having trouble installing the older version of illustrator onto my 64-bit machine.
Thanks!
Laura

Hi Laura,
I have the same problem with CS5... and no previous versions to convert my files!
Did you find another way?
Thanks!

Can't open .wmf files with Illustrator

I'm using Creative Suite CS2 on a PC/Windows XP operating system.
I'm suddenly unable to launch Illustrator when I try to open a .wmf file from within Windows Explorer. Instead, I get an error message that the file itself is not a valid program (DUH!).
I also cannot open them with the "Edit Original" command in InDesign.
I have tried changing the "Opens With Program..." option in the file properties from within Windows Explorer over and over.
Oddly, I can always open .wmf files with Illustrator from within Adobe Bridge, simply by double-clicking the file. And of course, I can open them from within Illustrator by simply going to "open file".
But I really want to be able to use the "Edit Original" feature in InDesign to launch and open .wmf files in Illustrator.
Anybody know what's going on? Is this a Windows problem, an Illustrator problem or an InDesign problem? And how do I fix it?
Thanks so much for any suggestions.

I'm sorry you're having this problem with Illustrator. Would you mind reposting over on the Illustrator forums? You've posted in the AIR forum and I think you'll have better luck over there.
Thanks,
Chris

I purchased a file that advised it works with Illustrator intalled via extension manager and it only shows in my 'others products'? I cant even open the file in illustrator or in design? Help =)

I purchased a file that advised it works with Illustrator intalled via extension manager and it only shows in my 'others products'? I cant even open the file in illustrator or in design? Help =)

What's the product name please?

Opening CDR Files

I saw a number of posts on this topic, but nothing about this specifically: I'm trying to open a file in CDR 8. It shows in the dialogue window as an openable format. But it's not working. I see the filter/plug-in in the app folder so it seems like it should work??

Like Illustrator, Draw can save files compressed or uncompressed. If you are trying to open Draw files from, say, a clipart collection of Draw files, that's likely your problem.
JET

Can't open photoshop files in Illustrator

I have been running Adobe CS3 on my computer for 4 years now, and recently installed windows 7. Since then I get an error on my computer when I try to open photoshop that says:
"there is no disk in drive. Please insert a disk into drive\device\Harddisk1\DRI"
From there all I can do is press try again or cancel. Try again doesn't do anything, so I press cancel and then the program opens like normal.
The other problem I am having is I try to open a photoshop file in Illustrator or try to place a photoshop file in illustrator the program crashes and says:
"The application ran out of memory. Please close some windows to free memory."
I don't have any other windows or programs running, and I have a quad processor and 8g of memory. Shouldn't be crashing.
Does anyone have a solution for me please?
Thanks

"there is no disk in drive. Please insert a disk into drive\device\Harddisk1\DRI"
It's looking for a file somewhere on a drive that no longer exists. Trash the prefs, flush the MRU (Recent Files) lists.
and I have a quad processor and 8g of memory. Shouldn't be crashing.
AI is a 32bit app and never uses more than 2.something GB of memory, no matter how beefy your system may be. Anyway, such issues are usually quite specific, so it will be hard for anyone to advise. Some basic specs on what PSDs you are trying to import might help...
Mylenium

Can't open a file in Illustrator CS

Hi There,
I've trawled through quite a few discussion boards before posting, but I'm stumped.
I'm using Illustrator CS, the original version which has been great for over 4-5 years. Now I find that I cannot open a file in CS when using <open> from the menu bar.
Usually we get the finder window to select the documents, but the programe quits even before it gets to this stage.
I added an account and tried to open files in Illustrator but this problem happened again.
I can double click an Ai file from the finder window...this launches Illustrator and opens the file ok. I also tried to create a new document which would not save at all.
I have the crash report from Illustrator, just wondering if someone could have a look and see if they can work it out.
Thanks So Much
Kitty

Hi,
Please download and install Creative cloud desktop app from the link below that will fix the issue with Adobe Application Manager,
https://creative.adobe.com/products/creative-cloud
Once you have this installed please install the latest version of premiere pro that premiere pro 2014.1(8.1).
Now try to open the project.
Hope that helps.
Thank you,
Mohd. Naseem.

Problems opening EPS-files in Illustrator CS5.1

I have problems opening some EPS-files that I downloaded from Shutterstock. Their support person told me to contact your support. I’m using Illustrator CS5.1 on a PC. When I try to open the files Illustrator's suddenly not responding and I have to close the program to continue.

Hi Lotta,
Will it be possible for you to share with me any one of the EPS file with which AI is crashing ?
Thanks & Regards,
Raghuveer Singh
[email protected]

Default open dwg files in Illustrator CS6

I frequently use dwg files in Adobe Illustrator, so I set dwg files default program to Illustrator CS5.
We recently upgraded to CS6 and when I opened it, it didn’t update the default program. I tried using the “open with” menu. Illustrator CS6 doesn’t show as one of the options, so I browsed for it, selected it, clicked ok. The dialog box closed, but CS6 wasn’t added to the menu. I received the same results using “Associate a file type with a program” in the Control panel.
Any ideas how to make Illustrator my default program for dwg files?
Thanks

It is not related to Creative cloud but a OS specific issue. You didn't mentioned the OS but I pressume it is Windows because we have seen this on Windows.
Open the Control Panel from the Start menu.
Mine is set in top right to 'View by' Category. I clicked on Programs (green link).
Under Default Programs I clicked on the blue link for 'Make a file type always open in a specific program'.
Wait for 'Loading..'. to finish. Make sure the list is sorted by Name and scroll down to '.dwg'. Select it and click the button for 'Change program...'.
Do no see Firworks listed in the Recommended Programs, so click on the small triangle to the right of Other Programs. Select Fireworks and click the OK button.
Wait for the list to reload and confirm the association changed.
Hope this helps !!

Opening svg files in Illustrator cs3

hi,
svg files which I open in Illustrator have all lines very thick (about 20times thicker they should be). All the files look good in svg adobe viewer.They come from a "closed" system so I do not know how were they saved.
Peter

Ed/Ray,
They are Artios Cad files. Artio Cad is a 3D program from Esko Graphics used for packaging work. Lets you fold your box in 3D etc.
You will need the Esko Pluggins in order to open your ard files in Illustrator. Not sure if they have them for CS3 yet but they do for CS2 and below and are free I believe from Esko's web site.
Good luck,
Jeff

Opening .ard files in Illustrator CS3

Hello all,
Has anyone been able to access .ard files in Illustrator CS3?
Thanks for your help.

Ed/Ray,
They are Artios Cad files. Artio Cad is a 3D program from Esko Graphics used for packaging work. Lets you fold your box in 3D etc.
You will need the Esko Pluggins in order to open your ard files in Illustrator. Not sure if they have them for CS3 yet but they do for CS2 and below and are free I believe from Esko's web site.
Good luck,
Jeff

Open .CDR files on Illustrator?

Similar Messages

Maybe you are looking for