Open commitments though Delivery complition ticked for PO.

Dear Experts,
I am facing a very strange issue.
We have a PO with 10 line items all items are alike except line item 9/10 where unit of measure is EA (each) and for others it is D (days). (account assignment catagory as Project, in the account assignment WBS element, Commitment item, Funds center, Fund are maintained, and it is same for all line items),
All the items are ticked for del.complition. So apperantly these items should not appear as open commitments in Funds consumption report,
First Eights lines (which have unit of measure as D) are not appearing in Fund consumption report but the last two line items 9/10 (with unit as EA) are appearing as open commitment in Funds consumption report.
I just changed the unit of measure of line item 8/9 to D from EA and saved the PO. After this i run the Funds consumption report and to my surprise the line items 8/9 are not appearing as open commitments.
I am not getting how come Unit of measure is playing role in Funds consumption.
Can somebody help me understand.
Best Regards
abhijit

Hi,
This reply is more of a guess work than otherwise:
Commitment seems to be created with unit of measure as D, possibly because that is the base unit of measure. EA could be alternate unit of measure which is entered in the PO. When you set delivery completion indicator, commitment is removed to the extend of EA rates (reason note known - possibly due to corrections in PO subsequently from D to EA. You can check the PO change history in this regard)
To further understand the issue, you can verify the value of commitment with D & EA from table COOI by passing the object number with and without delivery completion indicator. Alternatively, you can use transaction RKACSHOW to see the changes in commitment with differing units of measure and with / without delivery completion indicator.
Please post the results after trying out.
Muraleedharan.R

Similar Messages

To exclude Open Order Value in Credit exposure for Delivery credit Block

Dear All,
I have assigned the credit Limit block at the Delivery Level.
For the credit Exposure, i have removed the ticked for Open Sales Orders.
But when i created sales Order, that open order value get added to the exposure. I want to have only the Open Delivery values and other pending Invoices.
Is there any option for me to avoid the open sales Order value get updated in the Credit Exposure.
Thank U,
Uwanthi

Hi,
Remove Sales document type from 'Assign Sales Documents and Delivery Documents' node and assign only delivery credit group.
Check configuration in OVA8 for both the credit groups.
In FD32 if sales value is already added as open items and exposure is updated, try using a new customer to test your requirement or reset the customer.
Regards,
Amit

HT1351 Music imported from CDs will not synch to my iphone or ipad - even though it's ticked and set up correctly. Looking at other posts this seems ot have been an issue for ages. The latest itunes software update hasn't fixed it

This has now been ongoing for over a month - the lastest software release hasn't fixed it.
I can import music from CDs - the tracks are ticked for synching and all the associated rigmarole is correct.
Problem is when I synch, apps go across but imported music doesn't. It just gets to step 5 - waiting for changes to be applied - and then does nothing until it eventually finishes synching but no music has come across.
Same issue on my iphone.
I have looked at some solutions on forums but they seem complicated and I don't understand why apple haven't yet fixed this (or why you can't contact them). Seems a basic fundamental service that they are not supplying.
Having spoken to people in the family, its seems I'm not laone with this problem (unless you have a mac......)

I had this same problem with my new MBP 15", but only with the USB port on the left side. The USB port on the right side worked fine. Perhaps the ports on the left don't have enough signal energy for the iPhone.
Anyway, try using a different USB port, and if that doesn't work, perhaps you could try a powered USB hub.

Funds Consumption Open commitments

Dear Experts,
I am facing a very strange issue.
We have a PO with 10 line items all items are alike except line item 9/10 where unit of measure is EA (each) and for others it is D (days). (account assignment catagory as Project, in the account assignment WBS element, Commitment item, Funds center, Fund are maintained, and it is same for all line items),
All the items are ticked for del.complition. So apperantly these items should not appear as open commitments in Funds consumption report,
First Eights lines (which have unit of measure as D) are not appearing in Fund consumption report but the last two line items 9/10 (with unit as EA) are appearing as open commitment in Funds consumption report.
I just changed the unit of measure of line item 8/9 to D from EA and saved the PO. After this i run the Funds consumption report and to my surprise the line items 8/9 are not appearing as open commitments.
I am not getting how come Unit of measure is playing role in Funds consumption.
Can somebody help me understand.
Best Regards
abhijit

Hi,
This reply is more of a guess work than otherwise:
Commitment seems to be created with unit of measure as D, possibly because that is the base unit of measure. EA could be alternate unit of measure which is entered in the PO. When you set delivery completion indicator, commitment is removed to the extend of EA rates (reason note known - possibly due to corrections in PO subsequently from D to EA. You can check the PO change history in this regard)
To further understand the issue, you can verify the value of commitment with D & EA from table COOI by passing the object number with and without delivery completion indicator. Alternatively, you can use transaction RKACSHOW to see the changes in commitment with differing units of measure and with / without delivery completion indicator.
Please post the results after trying out.
Muraleedharan.R

Open commitments of Project PO needs to be cleared

Hi All,
User wants to have the Purchase Order commitments cleared.
The issue is related to open commitments for project Purchase Order. The user needs to have the commitments cleared so she can put a final close to the charge code.
We tried option to tick the Final Inv indicator in Purchase Order Delivery Tab, for which SAP system is giving an error u201CValuation area needs to be assigned to plantu201D. We also identified that Table related to Plant Valuation Area is not showing any value related to Plant.
Can any one suggest and solution. This Company code is in inactive mode?
Regards,
Pradeep

Hi Ahmed,
When I am trying to save after check Deliv. Compl. check box, system is giving me an error,
Valuation area not defined
Message no. ME059
Diagnosis
The valuation area defined for the plant is not defined in table T001K.
Procedure
Check the assignment plant -> valuation area in table T001W.
How can we rectify this problem? Waiting for reply
Regards,
Pradeep

Open PO and delivery completion indicator

hi all,
We have many PO which are open and quite old. we want to close those POs. One way is to do that with delivery completion tick. how can i do that with MM17? Or is there any other way other than BDC?

Hi
MM17 is mass maintenance for Material Master.
For changing mass POs you need to use MEMASSPO
Here Delivery completed is available for mass change.
Regards
RAJESH DANGLE
do reward if problem solved...

How to calculate the OPEN QUANTITY in delivery Duelist Report

Hi Everybody,
I have a query for finding out the OPEN QUANTITY for schedulines for a delivery.
If for example the report is run for 2nd of February, it is necessary to
determine whether there are delivery relevant schedule lines before the
2nd.
If yes, we need to know whether there is an open quantity to this line
item.
If yes, this open quantity is a negative deviation (we delivered not
enough).
If there is no open quantity it is necessary to determine whether for the
earliest future to be deleviered schedule line, the open quantity equals
the ordered quantity (VBEP-WMENG),
if No the the difference between both values equals the positive deviation
(we delivered more than requested)
If the open quantity equals the ordered quantity there is no deviation.
The problem is to calculate the open quantity and the SAP standard there is function
builder used in SAP standard include MV45AF0O_OFFENE_WERTE_ERMITTEL, the
function builder is called RV_SCHEDULE_CHECK_DELIVERIES'. But how could we use in this formulae in a Custom delivery report.
Looking for your helpful suggestions.
Many thanks in Advance,
Mira Saikrishna

Krishna....have a look in the below threads where there was a similar requirement..
error while using BAPI_OUTB_DELIVERY_CHANGE
change outbound delivery

Table for open Purchase order and pending invoices for vendors

Hi,
Are there any table to know open Purchase orders and pending invoices for vendors.
Quick response will be appreciated.
Thanks & Regards

hi,
Purchase Order:
S011:(PURCH: Purch. Group Statistics)
Statistics (SSOUR)
Version (VRSIO)
Month (SPMON)
Day (SPTAG)
Week (SPWOC)
Posting Period (SPBUP)
Purchasing Org (EKORG)
Purchasing Group (EKGRP)
Vendor No (LIFNR)
S012: (PURCHIS: Purchasing Statistics)
Statistics (SSOUR)
Version (VRSIO)
Month (SPMON)
Day (SPTAG)
Week (SPWOC)
Posting Period (SPBUP)
Purchasing Org (EKORG)
Purchasing Group (EKGRP)
Material No (MATNR)
Plant (WERKS)
Info Record Category (ESOKZ)
Material Group (MATKL)
Info Record (INFNR)
Country (LAND1)
EINE: (Purchasing Info Record: Purchasing
Organization Data)
Info Record (INFNR)
Purchasing Org (EKORG)
Info Record Type (ESOKZ)
Plant (WEKS)
EKET: (Delivery Schedules)
Purchasing Doc (EBELN)
Item (EBELP)
Delivery Schedule (ETENR)
EKPO: (Purchasing Document Item)
Purchasing Doc (EBELN)
Item (EBELP)
EKKN: (Account Assignment in Purchasing
Document)
Purchasing Doc (EBELN)
Item (EBELP)
Account Assignment (ZEKKN)
EKKO: (Purchasing Document Header)
Purchasing Doc (EBELN)
EORD: (Purchasing Source List)
Material No (MATNR)
Plant (WERKS)
Source List No (ZEORD)
thx,
Ganpat

Problem Gr/ir a/c where open line item is not ticked

In gl master in gr/ir a/c open line item is not ticked and for that when we see the report from fbl1n it's showing in red and the problem is continuing from the implementation year 2009. what will be the simple solution.
Regards
abhisekh mandal

Hi
Check the link
Change GL to open item managed
Regards
Sanil

Delivery completed indicator for Service purchase order item

Want to check the PO item for services already delivery completed.
Field EKPO-ELIKZ (delivery completed indicator) is for material line item, is there a equavalent field for Service line item?
What field /how to to check for a service line item in Purchase order already delivery completed ?

For material:
Delivery completion (DCI) tick available at line item level for each material (EKPO- ELIKZ)so you can check for the each material in PO the DCI is available or not.
For Services:
As Service code (Service line items) are maintained in details screen of Header line item. So whenever the DCI (Delivery completion indicator) marked for that Header line item it means that all the service line items are marked as DCI for that Header line.
DCI indicator can mark manually in Change PO mode and automatically when service entry done as final for that Header line.
So you can check the DCI for service same way as you do for material
Hope it will help you
Regards
Vikrant

Delivery completed indicator for STO cannot be set!

Dear colleagues,
There are number of STO’s those goods issue quantity > quantity of goods received. Because of this delivery completed indicator cannot be set due to message “06 848 - Delivery completed indicator cannot be set for item XXXXX”.
There is an OSS note (167795) that allows to set delivery completed indicator for such purchase orders. Even though our SAP release is 6.04, report RM06EV70 does not exist (yet BADI ME_ARCHIVE_ACTIVE is active) in the system and OSS note cannot be implemented.
Any help would be appreciated.
Regards,
Melih
PS. Please do not provide answers like “the goods receipt must be first posted via the entire goods issue quantity; then you can post a scrapping via the shortfall quantity” since there are backdated STO’s.

Hi,
Find STO created for which plant in t.code:ME23N and check MRP parameter maintained for that plant in t.code:OPPQ( also check entry of that plant in t.code: OMCD).
Also cross check which Field Selection Key assigned to your STO PO document type and check “Delivery completed" indicator” available as Optional entry in GR/IR control segment in your Field Selection Key.
SPRO - > MM - > Purchasing -> Define Screen Layout at Document Level
Regards,
Biju K

Why does Googlemail not appear on the Start Page every time instead of going all through "more" and " even more etc, plus having to sign in even though I have ticked the Stay signed in box?

There is no consistency when one gets the Mozilla Firefox Start page.There is a line as follows :
Web Images Maps News Shopping Books more
To get Gmail one has to click on "more" which gets one a dropdown menu which ends in "even more" Clicking on this takes one to a page headed "Even More Google Products", including (Hurrah!) M Gmail.
Click on this and one gets the page where one signs in, even though I have ticked the box entitled " Stay signed in" and at last ones's e-mail page turns up. Very occasionally, instead of Books or Shopping on the Start Page "Gmail" is there which when clicked on takes one directly to one's e-mail.It seems a hell of a rigmarole just to get one's e-mail!

You can set Firefox home page to one of your choosing, see [[how to set the home page]].
If the keep me signed in option is not working, you may have a malformed cookie. Try deleting Google/Gmail cookies, for details on how to do that see [[deleting cookies]].

TB won't open even though Task Manager says its running. Why?

Windows 8.1.
TB worked fine 'til few days ago.
Now it won't open even though Task Manager indicates it's running.

It is possible that your security software (firewall, anti-virus) blocks or restricts Thunderbird without informing you, possibly after detecting changes (update) to the Firefox program.
Remove all rules for Thunderbird and the plugin-container from the permissions list in the firewall and let your firewall ask again for permission to get full, unrestricted, access to internet for Thunderbird.
*https://support.mozilla.org/kb/fix-problems-connecting-websites-after-updating

Reg.Delivery complete ticked problem

Dear All
Please help in this matter.
In our partially goods received Pos we ticked 'delivery complete' to prevent the further GRN.Using this ticked option how to prevent the further GRN.Then how to create system error message in OMCQ don't let the further GRN.
Option 1 : Using the Latest GRN date option we can prevent the further GRN.
Is there any possibility using the delivery complete ticked option can prevent the further GRN
Thanks
S.K Rajakumar

Hi,
Using Delivery Complete tick, you can not prevent the further GRN. By doing this, you only mark that you do not expect any further GRN & the PO should therefore not be considered for MRP. To prevent further GRN, change the PO quantity to actual quantity received.
Hope this helps.
Regards,
Prashant

Open quantity remains open even when delivery and goods issue is completed

Hi gurus,
We have so many deliveries in system where open quantity in outbound delivery document shows the quantity as open even though the goods issue is completed and invoice has been created and accounting documents are also cleared.
I am not getting why it is happening. can someone please advise or throw some light on this.
Vice versa they are showing up in MRP run as requirements.
Thanks in advance gurus,
Kind regards,
Gopio.

Hi Amol,
I think i got the correct one which is RVV05IVB, and i had selected the shipping due date index, but it did not clear the open quantity, still it remained as open quantity.
And the message i got after running the report is pasted below.
Reorganization of SD Document Indices
Reorganization sales document indexes with the following selection criteria:
I EQ 80015593
Delivery due Index
How does that open quantity gets updated, or is there any control that we can deactivate as these are showing up in MD04 as sales requirements.
Thanks,
Regards,
Gopio.

Open commitments though Delivery complition ticked for PO.

Similar Messages

Maybe you are looking for