Open Crystal Report full screen at InfoView and hide navigation panel

Dear all,
In InfoView, how to globally set so that Crystal Report document will be opened as full screen and also hiding the navigation panel.
I know InfoView > Preference can open in full screen, but this must be done for each user. How to set it globally for all users?
And also to hide the navigation panel on the left hand side (parameters, group tree) that applies for all user (global)?
Thank you very much.
Kind regards,
aswin

Dear Martijn van Foeken,
Wow that's so advanced.
1. Do you have any information like what table and field in CMS database that we need to change in order to modify the BOE user preferences in InfoView?
2. For hiding the Navigation Panel in CR viewer, i was thinking if the setting might need to be done on the CR viewer. I tried changing the config file below:
D:\Program Files (x86)\Business Objects\Tomcat55\webapps\CrystalReports\crystalreportviewers\Web.config
In that config file there's a parameter below which i set to "true" but it doesn't work.

<add key="viewrpt.groupTreeHide" value="true"/>
Any idea?
Thank you very much Martijn and Merry Christmas.
Kind regards,
aswin

Similar Messages

Error: Failed to open the connection when opening Crystal Report in CMC or

Hello all,
I am getting theError: Failed to open the connection when opening Crystal Report in CMC or Infoview
with access database as the datasource which is in the network drive.

Hi Sonali,
This is because Crystal Reports does not recognize database connection from share drive
1. Save the database locally on server machine
2. Create a new database on server and link the new database with the database on Network.
Steps to link the database.
1.Create a new test database on server.
2. Go to File --> Get External Data --> Link tables | Select the database on Network Drive.
3. Select all the tables from the database.
4. Save the Database e.g. Test.mdb.
5. Create an ODBC Connection on server machine, with the same name as on client machine using test.mdb database.
Note: Click on Advanced button, enter the default user id and password for the odbc connection, it is not mandatory to give Login Name and Password, only if the user id and password are given then we need to provide the same user id and password in the CMC database configuration.
6. Create a report using this ODBC connection, and save the report to Enterprise.
Regards,
Navin

Unablo to open Crystal report from infoview

Hello Experts,
I have an issue while opening crystal report from BOBJ Infoview.
The report opens for some users and some users are getting this error.
" Internal error. Please contact your system administrator. [RCIRAS0216] ", the report is based on bw query and the users has access to this query,the users are able to execute other report based on same query.
Even some users who are administrator group members are getting this error.
Any help is appreciated.
Thanks
Kish

It happens to only one report,but when i changed the option to "Use same database logon when report is run" in CMC, it resolved the issue.
But i was wondering why the report encountered this error for the same user for whom it was working good in the past.
Thanks,
Sai

I recently had some repairs done to my ATT U-verse connection, and now my Safari doesn't open in a full screen. How do I reset that to open in full screen?

I recently had some repairs done to my ATT U-verse connection, and now my Safari doesn't open in a full screen. How do I reset that to open in full screen?

Mountain Lion is set up to close windows when you quit a program instead of saving them. To change this, put Safari in full-screen mode, move the cursor to the top, open Safari menu while holding Option key and close Safari from the menu.
If you want to do it automatically with all programmes, open System Preferences > General, and deactivate "Close windows when quitting an application"

Safari status bar disappears. I have tried clicking on show status bar and it will only appear when I move the cursor to the top of the screen. I can not minimize the open page only full screen or close the browser. Any idea how the rectify this

Safari status bar disappears. I have tried clicking on show status bar, under the View tab and it will only appear when I move the cursor to the top of the screen. I can not minimize the open page, only full screen or close the browser. Any idea how the rectify this issue?

One enters and exits full-screen with control+command+F keys. This is on the View menu in Safari. Optionally, the green traffic light in your browser title bar, if you roll over it, has the full-screen control it it. While in full-screen mode with Safari, moving your mouse pointer virtually up, and off-screen reveals the Safari title bar again, and you can click the green traffic light to exit full-screen mode.
You can hide/show the status bar by simply typing command+/. This too, is on the Safari View menu. and in 10.10.1 — it works reliably for me.

All of sudden my iphone 4s any picture I take outside I cannot forward via email or text and I can only see it, in the camera roll. When I try to open the picture full screen it is blank. Anyone have any ideas to fix it?

all of sudden my iphone 4s any picture I take outside I cannot forward via email or text and I can only see it, in the camera roll. When I try to open the picture full screen it is blank. Anyone have any ideas to fix it?

Close out of the camera app, double tap the home button and completely close out of the app.
Then do a reset, no data loss. Hold down the home/sleep button together until you see the apple logo and then release, then wait for the phone to boot back up.
Then check your camera roll again.

How to open Crystal Report from the SAP GUI ?

Hi experts,
We have developed some reports for our ECC 6.0 system by using Crystal Report 2008 and SAP integration kit , these reports are published to BO edge 3.1 server. To view the report, our user have to open IE and login Infoview first.
For convenience, we want to open Crystal report from SAPGUI directly without login BOE, How can we do it?
Thanks.

Hi
please take a look here
Crystal Reports
Regards,
STratos

Error while opening Crystal report 2008

Hi All,
I get the following error when I try to open crystal report 2008 trial version:
"Entry Point Not Found The procedure entry point ?CanStackDump@SLogger@CXLib400@@SA_NXZ could not be located in the dynamic link library cxlibw-4-0.dll."
To over come this I tried to install crystal report 2008 SP1 but it didn't help,
even I uninstalled all Crystal report setup and tried to install Crystal report 2008 server even that didn't helped.
Kindly suggest some solution.
Thanks
Deep Kulshrestha

Hi Deep,
Try these links:
http://boardreader.com/thread/ERROR_SvcMgr_exe_Entry_Point_Not_Found_5cb3X2r3z.html
http://www.tek-tips.com/viewthread.cfm?qid=1505754&page=11
I hope they will help.
Jesper

Having trouble opening Crystal Report files from a document library

I am trying to open Crystal Report .rpt files from a document library in either the native, client Crystal Reports software or in Crystal Reports Viewer. When I add the Crystal Report files to a document library and attempt to open them SharePoint displays
a prompt asking me to save the file locally instead of opening the file. I have done a lot of research online and found several sites discussing similar scenarios, however, I have not been able to get these solutions to work. Here is a short list of sites
I have referenced for possible solutions:
http://naadydev.blogspot.com/2013/03/crystal-report-viewer-sharepoint-2010.html?showComment=1383339860122
http://social.technet.microsoft.com/Forums/sharepoint/en-US/52aabf2d-10dc-424c-bd50-124fc972a9b9/crystal-report-viewer-integration-with-sharepoint-2010?forum=sharepointgeneralprevious
http://www.codeproject.com/Articles/42731/Crystal-Reports-WebPart-for-SharePoint
Here are the steps I have done to try to get the .rpt files to open:
Added the Crystal Report extension .rpt as a MIME type
Installed the Visual Studio 2012 Crystal Reports Viewer toolbar
Installed the 64-bit Crystal Reports runtime
I have also created a solution file based off the Code Project site which partially works, but not quite right. In this project I have created a document library called "Crystal Reports rpt Files" and deployed the solution file to a site. When
I open the Web Part Maintenance Toolbar I can see the selected .rpt file in the drop-down, but no Crystal Report file is displayed on the page itself.
I am not sure what I am doing wrong. Does anyone have experience working with Crystal Reports and SharePoint 2013 (or earlier versions) that could lend some advice?
Thank you,
Alex

We are having the exact same issue, has anyone resolved this yet?

Re: Crystal Reports 5.0 (32-Bit) and Forte 2.0H16 on NT3.51

Dear Silke,
Crystal's default for identifying a table in the report design is
<schema>.<table>. You can change that by going to the Database Location menu
item and cutting the schema prefix off. You should do that for every table in
the report. The PESetNthTableLogOnInfo function will, I believe, not change
the schema prefix of a table, since it assumes you really want that schema,
i.e., as an override. Also, if you are using the propagateAcrossAllTables
feature of the function make sure that every table has the schema prefix cut
off, otherwise those tables will be skipped, since the propagate feature applies
to all other similar tables only. For example, some of the tables could be
Sybase, etc.
I believe you can change the default behaviour of the CR Report Designer in the
File->Preferences menu, so that when reports are designed the schema prefix is
not automatically attached.
I have compiled some guidelines on designing reports to make them work properly
with Forte. I will try to send them to you next week. Crystal Reports and its
C API are a good product, and you will get good performance once the report
design is set up properly.
Yours very sincerely, John Hodgson.
Schulte, Silke (DVD) wrote:
The problem seems to be, that Crystal stores the database name in the
report. If you want to change the database you have to develop your
report new, although you give the connection-information via the API.
The hotline from Crystal told us, when using subreports you have to use
the PESetNthTableLogOnInfo and to go through all the subreports and
change the connect-string.
Our experience is, you have to do both: change the report and call the
other function for the subreports.
Thank you very much for all the tips.
Regards
Silke Schulte
Union-Investment, Frankfurt / Main, Germany
e-mail: [email protected]
From: Ajith Kallambella M[SMTP:[email protected]]
Sent: Mittwoch, 23. September 1998 15:17
To: [email protected]; ForteUsers; [email protected]
Subject: RE: Crystal Reports 5.0 (32-Bit) and Forte 2.0H16 on NT
3.51
Hi There,
Crystal reports stores Database name as a hard-coded
value in the
report template. So if you have to use an other
database, you will
have to open the report template and modify the
database name. I
think this is why you are getting Crystal API error.
Hope this helps!
Ajith Kallambella M
Forte systems Engineer,
International Business Corporation.
Hello,
I wonder if we have a similar problem.
We are using Crystal Reports 5 and Forte 3.0.F.2. For
the interface
between Forte and Crystal we have in Forte a Lib using
C-wrappering to
the C-API of Crystal.
We have developed a report on a database in our
development-environment. This report comes up with data
and works
correct. It's no different if we have saved the report
in Crystal with
data or without.
If we want to use the same report on another database
in our
test-environment the window from crystal reports comes
up and when
starting there is an error from the Crystal API
function.
Both environments use the same version of an Oracle
Database and are on
Open VMS. The client for the test is in this case
always the same.
From the C-API we use the method PEStartPrintJob after
we have specified
the rest for the report.
Is there a possibility that this is the same error you
mentioned? Or do
you have any other ideas?
Any help is appreciated.
Regards
Silke Schulte
Union-Investment Frankfurt (Germany)
email: [email protected]
From: Katie Carty[SMTP:[email protected]]
Reply To: Katie Carty
Sent: Montag, 21. September 1998 19:14
To: 'Tim Hagemann'; [email protected]
Subject: RE: Crystal Reports 5.0 (32-Bit) and Forte2.0H16 on NT
3.51
Tim,
You need to upgrade to CrystalReports 6.0. There isa bug in the
interaction between Forte and CrystalReports 5.0 (Idon't know on
which side the bug resides, but I think that it is onthe Crystal end,
since the problem occurs both through C-wrapperingand OLE
interaction), which does not allow you to invoke thePrintReport
method unless you have saved data with the report.
As far as I know, there is no workaround, and theonly solution is to
upgrade to CrystalReports 6.0.
FYI, there is no ActiveX control supplied withCrystalReports 5.0 -
you are actually using standard OLE integration.
Hope this helps...
Regards,
-Katie
-----Original Message-----
From: Tim Hagemann [SMTP:[email protected]]
Sent: Monday, September 21, 1998 11:27 AM
To: [email protected]
Subject: Crystal Reports 5.0 (32-Bit) and Forte2.0H16 on NT 3.51
Hi Forte-User !
We got a big problem here using the crystal active-xcontrol. On my
windows-nt 4.0 machine (with
crystal reports installed completely) all works well.On our test
machine (with only the crystal ActiveX
installed), the Forte runtime shuts down afterinvoking a special
method of the ocx (PrintReport).
The cause for shutting down (no stacktrace orsomething like that) is
a generated c++ exception in crystal -
but we don't know the cause of this exception.
Has anyone made the control work under nt 3.51 ? Doesanybody know
(exactly) what dll's we'll have
to use ?
TIA,
Tim Hagemann
Tim Hagemann
Ascom GmbH Email:
[email protected]
Charlottenburger Allee 61 Phone: +49241 96806 273
D-52068 Aachen Fax: +49241 96806 225
>
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive
<URL:http://pinehurst.sageit.com/listarchive/>
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive
<URL:http://pinehurst.sageit.com/listarchive/>
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive
<URL:http://pinehurst.sageit.com/listarchive/>
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>-
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>

Dear Silke,
Crystal's default for identifying a table in the report design is
<schema>.<table>. You can change that by going to the Database Location menu
item and cutting the schema prefix off. You should do that for every table in
the report. The PESetNthTableLogOnInfo function will, I believe, not change
the schema prefix of a table, since it assumes you really want that schema,
i.e., as an override. Also, if you are using the propagateAcrossAllTables
feature of the function make sure that every table has the schema prefix cut
off, otherwise those tables will be skipped, since the propagate feature applies
to all other similar tables only. For example, some of the tables could be
Sybase, etc.
I believe you can change the default behaviour of the CR Report Designer in the
File->Preferences menu, so that when reports are designed the schema prefix is
not automatically attached.
I have compiled some guidelines on designing reports to make them work properly
with Forte. I will try to send them to you next week. Crystal Reports and its
C API are a good product, and you will get good performance once the report
design is set up properly.
Yours very sincerely, John Hodgson.
Schulte, Silke (DVD) wrote:
The problem seems to be, that Crystal stores the database name in the
report. If you want to change the database you have to develop your
report new, although you give the connection-information via the API.
The hotline from Crystal told us, when using subreports you have to use
the PESetNthTableLogOnInfo and to go through all the subreports and
change the connect-string.
Our experience is, you have to do both: change the report and call the
other function for the subreports.
Thank you very much for all the tips.
Regards
Silke Schulte
Union-Investment, Frankfurt / Main, Germany
e-mail: [email protected]
From: Ajith Kallambella M[SMTP:[email protected]]
Sent: Mittwoch, 23. September 1998 15:17
To: [email protected]; ForteUsers; [email protected]
Subject: RE: Crystal Reports 5.0 (32-Bit) and Forte 2.0H16 on NT
3.51
Hi There,
Crystal reports stores Database name as a hard-coded
value in the
report template. So if you have to use an other
database, you will
have to open the report template and modify the
database name. I
think this is why you are getting Crystal API error.
Hope this helps!
Ajith Kallambella M
Forte systems Engineer,
International Business Corporation.
Hello,
I wonder if we have a similar problem.
We are using Crystal Reports 5 and Forte 3.0.F.2. For
the interface
between Forte and Crystal we have in Forte a Lib using
C-wrappering to
the C-API of Crystal.
We have developed a report on a database in our
development-environment. This report comes up with data
and works
correct. It's no different if we have saved the report
in Crystal with
data or without.
If we want to use the same report on another database
in our
test-environment the window from crystal reports comes
up and when
starting there is an error from the Crystal API
function.
Both environments use the same version of an Oracle
Database and are on
Open VMS. The client for the test is in this case
always the same.
From the C-API we use the method PEStartPrintJob after
we have specified
the rest for the report.
Is there a possibility that this is the same error you
mentioned? Or do
you have any other ideas?
Any help is appreciated.
Regards
Silke Schulte
Union-Investment Frankfurt (Germany)
email: [email protected]
From: Katie Carty[SMTP:[email protected]]
Reply To: Katie Carty
Sent: Montag, 21. September 1998 19:14
To: 'Tim Hagemann'; [email protected]
Subject: RE: Crystal Reports 5.0 (32-Bit) and Forte2.0H16 on NT
3.51
Tim,
You need to upgrade to CrystalReports 6.0. There isa bug in the
interaction between Forte and CrystalReports 5.0 (Idon't know on
which side the bug resides, but I think that it is onthe Crystal end,
since the problem occurs both through C-wrapperingand OLE
interaction), which does not allow you to invoke thePrintReport
method unless you have saved data with the report.
As far as I know, there is no workaround, and theonly solution is to
upgrade to CrystalReports 6.0.
FYI, there is no ActiveX control supplied withCrystalReports 5.0 -
you are actually using standard OLE integration.
Hope this helps...
Regards,
-Katie
-----Original Message-----
From: Tim Hagemann [SMTP:[email protected]]
Sent: Monday, September 21, 1998 11:27 AM
To: [email protected]
Subject: Crystal Reports 5.0 (32-Bit) and Forte2.0H16 on NT 3.51
Hi Forte-User !
We got a big problem here using the crystal active-xcontrol. On my
windows-nt 4.0 machine (with
crystal reports installed completely) all works well.On our test
machine (with only the crystal ActiveX
installed), the Forte runtime shuts down afterinvoking a special
method of the ocx (PrintReport).
The cause for shutting down (no stacktrace orsomething like that) is
a generated c++ exception in crystal -
but we don't know the cause of this exception.
Has anyone made the control work under nt 3.51 ? Doesanybody know
(exactly) what dll's we'll have
to use ?
TIA,
Tim Hagemann
Tim Hagemann
Ascom GmbH Email:
[email protected]
Charlottenburger Allee 61 Phone: +49241 96806 273
D-52068 Aachen Fax: +49241 96806 225
>
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive
<URL:http://pinehurst.sageit.com/listarchive/>
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive
<URL:http://pinehurst.sageit.com/listarchive/>
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive
<URL:http://pinehurst.sageit.com/listarchive/>
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>-
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>

Installed BOE XI R3.1 Client tools now I cant open crystal reports?

After I unistalled the client tools I cant open Crystal Reports from local drives. I can from BOE, but not local or network drives. Plus all the Icons from these drives have been removed. What did I do wrong?

Need more info and it's not clear what you did or what is left on your PC but typically which ever CR product you still have installed going to the Add/Remove software and doing a Repair install on Crystal Reports Designer should fix the problem.
Thank you
Don

Crystal report server2008 (XI R2): InfoView Request timeout error

HI
Crystal report server2008 (XI R2): InfoView Request timeout error
            Some reports which are taking more than 10 to 15 minutess while running through InfoView gives error as follows:
An error has occured: Request timed out.
This error appears within the crystal report server and when user tries to access through browser client desktop also. Sometimes it prompts the error as follows when users try to access through browsers from there desk i.e through proxy connection.
   The proxy server received an invalid response from an upstream server.
   The proxy serer could not handle the request POST/report/CrystalReports/Viewrpt.aspx.
    Reason: Error reading from remote server
The timeout setting of all web.config files under infoviewapp, infoviewappactions, platform services, crystal reports folders have been checked and the default timeout 20 minutes is changed to 30 minutes and IIS is restarted, but still users are getting request timeout error within 10 to 15 minutes while running a crystal report. Even admin user.
Regards,
Patrick Raths

Please post your query to the [Business Objects Enterprise Administration|BI Platform; forum. This forum is dedicated to development and deployment of .Net applications that connect and interact with BusinessObjects Enterprise, BusinessObjects Edge, or Crystal Reports Server. This includes the development of applications using the BusinessObjects Enterprise, Report Application Server, Report Engine, and Web Services SDKs.
BTW., if thi is an important issue, I'd recommend creating a phone case.
Ludek
Edited by: Ludek Uher on Aug 11, 2010 1:57 PM

Open a SWT full screen shell on PocketPc

Hi to all, i want to open a SWT full screen shell on PocketPc, with aim to hide the win mobile bar , and hide the win close button of application!
It's possible? How i can do it?
Shell s = new Shell(disp, .... ? ....);
Thanks to all,
Muzero

I suppose that you have this exception when the second window is initiated...
Excuse my remark, it may be perfectly stupid : do you have two screens? The full screen window is supposed to show itself on the user's second screen.
Or maybe the screens are not handled the same way on each computer? (I'm not used at developping applications working on two screens...)
thanks for your help
LK

Always open safari in full screen

For months my imac has always opened safari in full screen now it doesn't n. How do I get this back and how do I keep it from happening in the future?

Step one is to create a new admin user account, log into it, and see if the issue persists.

Click on an icon, which opens up a full screen swiping gallery

I have a project I am doing right now, which is basicaclly a book which showcases various printed materials and presentations. The book is laid out where each page has a subject with a photo, a brief description and then 3-6 icons underneath which represent the different examples (brochure, presentation, etc.). I want to be able to touch an icon, and then go to a full screen gallery where you can swipe through the various images. I can do this with keynote (transparent keynote widget) but with keynote, you cannot swipe between slides. Any ideas?

Perhaps my first post was not clear. I want the ability to touch a graphic icon button and then automatically launch a full screen gallery. That is not possible with a gallery widget. A gallery widget cannot open automatically to full screen and I cannot hide it or have a graphic icon represent it on the screen. I can create a keynote that is 0% opacity and overlaps the icon button so that when you touch the icon, keynote opens in full screen automatically. The only downside is that I do not get the swiping functionality, hence my question

Open Crystal Report full screen at InfoView and hide navigation panel

Similar Messages

Maybe you are looking for