Open default folder or folder level in DTN

Hi, I see lots of older references to not being able to default a specific level of the DTN to open. Is it possible now to default a folder or level to open in the Detailed DTN or is is always just defaulted to closed and special development is required?
Any help is greatly appreciated.
Edited by: Kenneth Murray on Mar 26, 2008 7:53 AM

When the users enter the portal their left hand nav is totally collapsed (closed). I would at least like to have the 1st level of the DTN expanded (open) if it's possible. Seems kind of annoying that you have to open it up each time you go into the portal.
Thanks for any help you can provide.

Similar Messages

HELP. ............Hi folks hope some one can help me please.Having a problem in Bridge I open my images in ACR, as I open files in a folder and lets say they are labeled in yellow they are all going back to the camera raw default , in other words no ma

HELP. ............Hi folks hope some one can help me please.Having a problem in Bridge I open my images in ACR, as I open files in a folder and lets say they are labeled in yellow they are all going back to the camera raw default , in other words no matter what work I have done, inc cropping they all go back to ,as they came out of camera. What on earth is happening? I am on PS CS6. I might point out everything was working normally up to yesterday, when this first started.
I recently changed computer to 64bit from 32bit, not sure if this causing the problem or not. Any help would be appreciated.

Robert,
Would you be so kind to rephrase your question with concise, precise information and without any "let's say that" hypotheticals? Sorry, I can't quite follow you.
Also please give exact versions of Photoshop CS6 (13.what.what), of Bridge and of your OS.
Thanks.
BOILERPLATE TEXT:
If you give complete and detailed information about your setup and the issue at hand, such as your platform (Mac or Win), exact versions of your OS, of Photoshop and of Bridge, machine specs, what troubleshooting steps you have taken so far, what error message(s) you receive, if having issues opening raw files also the exact camera make and model that generated them, etc., someone may be able to help you.
Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
http://forums.adobe.com/thread/419981?tstart=0
Thanks!

Cannot open your default e-mail folder. Microsoft Exchange is not available. Either there are network problems or the Exchange computer is down for maintenance

Windows Server 2012 R1 with Exchange 2013 SP1
Windows XP SP3 with Outlook 2010 (14.0.4760.1000) computer is on the same network, but not a part of the domain.
When I try to configure Outlook profile for the user, I manually enter exchange server name and user name.
Check User button underlines server name and user name and profile gets created successfully.
Once I try to open outlook for the user I get
Cannot open your default e-mail folder. Microsoft Exchange is not available. Either there are network problems or the Exchange computer is down for maintenance
If I search the content of the log files under
X:\Program Files\Microsoft\Exchange Server\V15\Logging\RPC Client Access
I can’t find any records indicating a connection attempt from the client’s IP or references to the version of the outlook used, however I can see a 3 way handshake followed by a 4 RCP packets and then 4 nspi bind requests and responses when outlook opens
up and then connection is torn down.

Windows Server 2012 R1 with Exchange 2013 SP1
Windows XP SP3 with Outlook 2010 (14.0.4760.1000) computer is on the same network, but not a part of the domain.
Hi,
That version of Outlook 2010 (14.0.4760.1000) is not supported with Exchange 2013 and will not be able to connect. It need to be on at least SP1 +
Outlook 2010 November 2012 update (14.0.6126.5000)
See: Exchange 2013 System Requirements -
Client Support
Martina Miskovic

How do I change the default folder that opens when uploading a file to the internet from my mac? (at the moment it automatically defaults to 'Downloads' folder)

How do I change the default folder that opens when uploading a file to the internet from my mac? (at the moment it automatically defaults to 'Downloads' folder)
For example...
I am on a webiste and wish to upload a photo.
I click on select file on the website
Finder opens and defaults to 'Downloads' folder (it happens with all wesbites)
How do I change this?

I am on a webiste and wish to upload a photo.
I click on select file on the website
You are attempting to download the picture to your computer not uploading photo to the website if I am understanding you correctly.
To change the download direction, you must do so through your browser's Preferences. If you are using Safari, hopefully, someone who uses Safari will help you and/or post over in their forums. I do not use Safari.
If using Firefox>Preferences>General>Save Files to:

Is there a way to respond to Doc/Open events from a folder level javascript?

I'm wondering if there's a way to respond to Doc/Open events from a folder level javascript. If not, is there a way to programatically add a Document javascript to a PDF upon/after export from InDesign?
Thanks-
Jeremy

Bernd,
Thanks for your reply. I take what you write to mean that I can add a document-level javascript manually once the PDF is exported. But this is what I'm trying to avoid.
Ideally, I want to respond to Doc/Open events from a folder level javascript, but I'm not sure if/how I can make an event listener with Acrobat JS. If I can't do that, then I'm looking for a way to programatically add a Document level javascript upon export from InDesign - not manually within Acrobat, once the PDF is created.
Any thoughts?

Getting error 'Cannot open your default e-mail folder' in Exchange server 2010? what are common causes?

I'm getting error
'Cannot open your default e-mail folder' when try to access my email account on exchange 2010? Why I am getting this error? Is there any particular reason? And how can I manually fix it? plz suggest!!

Hi,
Some questions:
1. Can you open your account via OWA?
2. Can you configure your account on other user's computer?
Try disabling any 3rd-party firewall or AV programs, make sure no proxy applictions or settings.
Thanks,
Simon Wu
TechNet Community Support

How to change the default new project folder in Premiere Elements 13?

I keep all my projects on a different drive than the default My Documents folder. How can I change the default setting so that Premiere Elements does not try to create new projects in the My Documents\Pemiere Elements\13.0 folder? In fact, I do not want that folder to be used for anything (including layouts and styles).

steveb
Short version....
Referring to the 13.0 Folder in the Adobe Folder in documents, you wrote
In fact, I do not want that folder to be used for anything (including layouts and styles).
I do not believe that is possible.
For my best case scenario
Set the Scratch disks, not to Same As Project, but set for Custom with the set being the save location that you set for the project file.
Set the project save in, my preference, File Menu/Save As.
You are going to end up automatically with a 13.0 Folder in the Libraries/Documents/Adobe/Premiere Elements/13.0 Folder every time you open a Premiere Elements project. No matter how many times you try to delete the 13.0 Folder. And that 13.0 Folder will contain a Layout Folder and, if you applied a Style in the project, a Styles Folder.
Longer Version....
There is no problem directing your project file to the save location of choice. You can do that two way
1. After you open the project to the Expert workspace, go to File Menu/Save As to change the name of the project as well as the location for the save in order to avoid the defaults.
2. You can also do that through File Menu/New/Project.
That 13.0 Folder also gains its contents from the settings of the scratch discs in Edit Menu/Preferences/Scratch Disc - some examples preview files, disc encoding files, conformed audio files... Some Files/Folders are placed there automatically. So what to do to keep the Documents area clear of Premiere Elements files, project or otherwise after you have move all that you thought you could to a non Adobe default location? See above best case scenario.
Miscellaneous
1. If you set the save location of the project in either of the 2 ways, that setting will not hold from project to project. It will hold for that particular project.
3. If you set the Scratch disks in Edit Menu/Preferences/Scratch Disks, those settings seem to hold from project to project as well as for in the particular project.
Stevenb, please review and consider and verify. I have gone through several scenarios on what you would prefer. But, I do not see a way to make that happen with the programming that exists.
ATR

Open all files in folder?

i have this working to open a single file in the app "VoltaicHD";
set theFolder to "PATH:TO:FILES:"
tell application "Voltaic"
open theFolder & "00000.MTS"
end tell
my question is, how do i tell it to open everything in the folder and not have to specify every filename? would that be done in a loop? a list?
thanks,
BabaG

That should be simple (depending on the level of Voltaic's AppleScript support). This should work:
set theFolder to "PATH:TO:FILES:"
tell application "Voltaic"
open (every file of folder theFolder)
end tell
The only reason is might not work is if Voltaic can't deal with scanning theFolder for the files within it, in which case just have the Finder do it - as long as .MTS file are associated with Voltaic, they'll open just fine.

Default entry for Folder property - Changed behavior in SP14???

Hello,
Has anyone run into changed behavior for this page property in SP14. It seems to be valid for pages in both folders and worksets.
Ex. We have a workset that sits at 2nd level nav just below a 1st level entry point. So the workset is a 2nd level nav choice. The top page in that workset is the landing page for that nav and previously in SP9 the nav worked fine. We are finding now that in SP14 we have to set the Default Entry for Folder property to "yes" to make the 2nd level nav work. This could be another config issue in our environments but is following SP14 so far. Has anyone else sen this?
Thanks,
Doug Steckel
Air Products & Chemicals

Hi Daniel,
NavStructure:
... - Folder A
       - Page A <inv & defPage>
       - Page P1
       - Page P2
If you click on folder A, you get the content of page A which for the end-user is not explicitely visible in navigation. So page A "is" the content of folder A.
This is how web-like nav works, that you can click on a nav entry and that this entry has it's own content and not only the preset content of some sub entry.
Hope it helps to understand what I meant
Detlev

When ever I right click on the menu item "open containing folder" in the downloads window, it only opens the 'My Documents' folder. It never goes any farther than that. How do I fix this?

Open 'Tools----downloads'.---Right click on any downloaded file that is available in the list.---click on 'Open Containing Folder'
Results in opening the My documents folder.
Not in the folder I have listed in Tools ---Options --- General---downloads---Save files to:

You can use this extension to modify the menu.
*Menu Editor: https://addons.mozilla.org/firefox/addon/menu-editor/
You can also achieve this with code in the userChrome.css file below the default @namespace line.
*http://kb.mozillazine.org/userChrome.css
The customization files userChrome.css (interface) and userContent.css (websites) are located in the chrome folder in the user profile folder.
*http://kb.mozillazine.org/Editing_configuration
<pre><nowiki>@namespace url("http://www.mozilla.org/keymaster/gatekeeper/there.is.only.xul"); /* only needed once */
#context-sendimage,
#context-sendvideo,
#context-sendaudio { display:none!important; }</nowiki></pre>

My old iMac (screen sits on a white dome) opens with a tiny folder that flashes a question mark, instead of a login to user's desktop

My old iMac (screen sits on a white dome) opens with a tiny folder that flashes a question mark, instead of a login to user's desktop, when booting up after a forced shutdown. How do I get my operating system working again? Thanks --Jim

The blinking question mark indicates that the firmware could not find a valid Operating System on your machine.
Your harddrive may have failed. Your filesystem may have be come corrupted.
Try these things.
-- try to boot up from the installation disc.
The startup manager will list all of your bootable partitions then give you a choice of which to boot. Hold down the option key then power on. Continue holding down the option key until you see the startup manager. This brings up the startup manager. Click on your hd or disc. Click on right arrow key.
-- Sometimes if volumes don't appear in Startup Manager (what you get when you hold down the Option key at startup), you need to reset the Mac's PRAM, NVRAM, and Open Firmware. Shut down the Mac, then power it up, and before the screen lights up, quickly hold down the Command, Option, P, and R keys, until the Mac has chimed twice more after the powerup chime.
Then, before the screen lights up, hold down Command-Option-O-F until the Open Firmware screen appears. Then enter these lines, pressing Return after each one:
reset-nvram
set-defaults
reset-all
"The reset-all command should restart your Mac. If so, you have successfully reset the Open Firmware settings."
http://support.apple.com/kb/TS1812?viewlocale=en_US
Should the fail...
Try taking the battery out for 10 minutes. Put battery back in. Cross fingers. Power the machine back on.
How to eject a cd from the internal cd drive:
eject cd
List of devices:
devalias
List of variables:
printenv
More than you ever wanted to know about open firmware
http://www.firmworks.com/QuickRef.html

How can I change the default start up folder to be d:\work\ ?

How can I change the default start up folder to be d:\work\ ?
It seems to be going to one default folder every time I open that I didn't suggest.
I'm using Bridge CS4
Thanks ahead
Line

If the program does not open the last folder you visited you most likely have the option enabled to autoload Bridge on Startup. Either disable that option in PS or shut Bridge down before you shut off the computer.
Message was edited by: curt y
If you always want it to start on a specific folder you can leave it on autoload, go to folder you want it to start on then exit Bridge. It should load this each time in future. Many of us discourage the autoload option as it can lead to other problems as well.

Bridge CS4 always opens in the same folder

Since I upgraded to Photoshop CS4, Bridge always opens in the same
folder. It used to open up whatever folder I was working on last.
There must be a setting somewhere to tell Bridge to open the last
visited folder but I can't seem to find it. Any ideas?

Thanks Curt. That helped. I do have Bridge set to automatically start with Windows. I thought that shutting down Windows would cause Bridge to remember the last visited folder since Bridge was closed but I need to right-click on the Bridge icon in the system tray and exit before shutting down Windows. At least now I know why this was happening!

How do I save PDF files by default to the folder of the source file?

How do I save PDF files by default to the folder of the source file with Acrobat 9.0.0 Standard?

I am not seeing that behaviour. If I right-click a link to a .pdf file, I get the file saved with the original filename.
Maybe one of the settings in about:config controls that?
pdfjs.previousHandler.preferredAction is a setting that has a value of 4 with my setup. I have no idea what that means, and I could not find any explanation anywhere. You could try using different numbers for that value and see if any make any difference. Why has nobody bothered to explain that setting anywhere?

Script to open SVGs in a folder and save them to one multipage PDF

Hi.
I'm using Illustrator for work and I love it, I never needed scripts yet.
Now I have couple houndred svgs coming in per day,
I would like to have a script that opens every svg one by one in the selected directory and add them to a pdf
as pages of the same size and than save it.
Is this possible? How many files I could put in 1 pdf this way?
I'm using Illustrator CS5 on Win7 x64.
Thanks in advance.
Istvan

I think there is a 100 file limit on artboards ( not tested ) but the size would also affect that… You can't straight place *.svg but you can make group from them would that do you?
#target Illustrator
function filesToArtboards() {
          // My function variables…
          var doc, fileList, i, inFolder, mm, svgFile;
          // Get the user to select a folder
          inFolder = Folder.selectDialog( 'Please choose your Folder of files to place…' );
          // Check they ain't cancelled
          if ( inFolder != null ) {
                    // Gets just the SVG files…
                    fileList = inFolder.getFiles( /\.svg$/i );
                    // Make sure it has AI files in it…
                    if ( fileList.length > 0 ) {
                              mm = 2.83464567 // Metric MM converter…
                              // Set the script to work with artboard rulers
                              app.coordinateSystem =
                              CoordinateSystem.ARTBOARDCOORDINATESYSTEM;
                              // Add new multi-page document
                              doc = app.documents.add(
                                         DocumentColorSpace.RGB,
                                         width = 148.5*mm,
                                         height = 210*mm,
                                         numArtboards = fileList.length, // The number of SVG files
                                         DocumentArtboardLayout.GridByCol,
                                         artboardSpacing = 20*mm,
                                         artboardRowsOrCols = Math.round( Math.sqrt( fileList.length ) )
                              // Loop thru the counter
                              for ( i = 0; i < fileList.length; i++ ) {
                                        // Set the active artboard rulers based on this
                                        doc.artboards.setActiveArtboardIndex( i );
                                        // Create group from SVG
                                        svgFile = doc.groupItems.createFromFile( fileList[i] );
                                        // Move relative to this artboards rulers
                                        // Top Left
                                        sgvFile.position = [ 0, 0 ];
filesToArtboards();

Finder can't open my iPhoto Library folder anymore

I recently installed iLife '08, and can no longer open my iPhoto Library folder and subfolders using Finder. When I try, it automatically launches iPhoto, which severely limits my access to these files. I've looked at the built-in help and on-line help, and haven't found an answer yet. Does it have anything to do with something called a "media browser"?

Frsbdg
Welcome to the Apple user discussion forums
Yes - it has a lot to do with media browser
there are many ways to correctly and safely access your photos - using the finder is NOT one of them - it is (and always has been) recommended that you do not enter the iPhoto library directly. click here for a discussion of the ways to safely and correctly access your photos.
LN

Open default folder or folder level in DTN

Similar Messages

Maybe you are looking for