Open directory and Active directory

Hello everyone.
I am from a school in london. We currently have 8 servers (7 running Server 2003 and a recently installed Mac server running os x server 10.5)
We have recently installed new macs into our media room and need them to be set up to work with the current domain setup.
what we wish to do is to run the media centers computers through the Mac server but get the existing domain information from the Active directory server running windows. As i have not set up a mac server before I am having certain difficulties doing this. The first time we set up the active directory on the mac server we could log into the mac computers but could not change any of the policies to different groups to allow or deny certain applications from running. Everytime i go to save a policy for a certain group we get the error message
"Error while saving record "Finchley\Level 1@ Error -14140
Im guessing this is because we are trying to save that to the active directory and not onto the mac server so how can we Map the active directory to the Macs open directory so that we can customize the mac group policies?
Sorry if that didnt make alot of sense im typing abit fast
Thanks

Have you been here?
http://docs.info.apple.com/article.html?path=DirectoryAccess/1.8/en/c7od45.html
It should be straight forward, depending on how your AD accounts are setup.
Unfortunately, I currently see a bug in the system which is often causing the home directory share to fail to mount when I use the AD plug-in in its default configuration. I'm pleading with Apple to fix this soon.
If you use the plug-in in "true network home" fashion, by unchecking the 'force local home' option, then you should avoid this annoying bug. This method however requires plenty of network bandwidth and space for your entire Mac home folder.

Similar Messages

Looking for successful auth debug between cisco 1113 acs 4.2 and Active Directory

Hello,
Does anyone have a successful authentication debug using cisco 1113 acs 4.2 and Active Directory? I'm not having success in setting this up and would like to see what a successful authentication debug looks. Below is my current situation:
Oct 6 13:52:23: TPLUS: Queuing AAA Authentication request 444 for processing
Oct 6 13:52:23: TPLUS: processing authentication start request id 444
Oct 6 13:52:23: TPLUS: Authentication start packet created for 444()
Oct 6 13:52:23: TPLUS: Using server 110.34.5.143
Oct 6 13:52:23: TPLUS(000001BC)/0/NB_WAIT/46130160: Started 5 sec timeout
Oct 6 13:52:23: TPLUS(000001BC)/0/NB_WAIT: socket event 2
Oct 6 13:52:23: T+: Version 192 (0xC0), type 1, seq 1, encryption 1
Oct 6 13:52:23: T+: session_id 763084134 (0x2D7BBD66), dlen 26 (0x1A)
Oct 6 13:52:23: T+: type:AUTHEN/START, priv_lvl:15 action:LOGIN ascii
Oct 6 13:52:23: T+: svc:LOGIN user_len:0 port_len:6 (0x6) raddr_len:12 (0xC) data_len:0
Oct 6 13:52:23: T+: user:
Oct 6 13:52:23: T+: port: tty515
Oct 6 13:52:23: T+: rem_addr: 10.10.10.10
Oct 6 13:52:23: T+: data:
Oct 6 13:52:23: T+: End Packet
Oct 6 13:52:23: TPLUS(000001BC)/0/NB_WAIT: wrote entire 38 bytes request
Oct 6 13:52:23: TPLUS(000001BC)/0/READ: socket event 1
Oct 6 13:52:23: TPLUS(000001BC)/0/READ: Would block while reading
Oct 6 13:52:23: TPLUS(000001BC)/0/READ: socket event 1
Oct 6 13:52:23: TPLUS(000001BC)/0/READ: read entire 12 header bytes (expect 16bytes data)
Oct 6 13:52:23: TPLUS(000001BC)/0/READ: socket event 1
Oct 6 13:52:23: TPLUS(000001BC)/0/READ: read entire 28 bytes response
Oct 6 13:52:23: T+: Version 192 (0xC0), type 1, seq 2, encryption 1
Oct 6 13:52:23: T+: session_id 763084134 (0x2D7BBD66), dlen 16 (0x10)
Oct 6 13:52:23: T+: AUTHEN/REPLY status:4 flags:0x0 msg_len:10, data_len:0
Oct 6 13:52:23: T+: msg: Username:
Oct 6 13:52:23: T+: data:
Oct 6 13:52:23: T+: End Packet
Oct 6 13:52:23: TPLUS(000001BC)/0/46130160: Processing the reply packet
Oct 6 13:52:23: TPLUS: Received authen response status GET_USER (7)
Oct 6 13:52:30: TPLUS: Queuing AAA Authentication request 444 for processing
Oct 6 13:52:30: TPLUS: processing authentication continue request id 444
Oct 6 13:52:30: TPLUS: Authentication continue packet generated for 444
Oct 6 13:52:30: TPLUS(000001BC)/0/WRITE/46130160: Started 5 sec timeout
Oct 6 13:52:30: T+: Version 192 (0xC0), type 1, seq 3, encryption 1
Oct 6 13:52:30: T+: session_id 763084134 (0x2D7BBD66), dlen 15 (0xF)
Oct 6 13:52:30: T+: AUTHEN/CONT msg_len:10 (0xA), data_len:0 (0x0) flags:0x0
Oct 6 13:52:30: T+: User msg: <elided>
Oct 6 13:52:30: T+: User data:
Oct 6 13:52:30: T+: End Packet
Oct 6 13:52:30: TPLUS(000001BC)/0/WRITE: wrote entire 27 bytes request
Oct 6 13:52:30: TPLUS(000001BC)/0/READ: socket event 1
Oct 6 13:52:30: TPLUS(000001BC)/0/READ: read entire 12 header bytes (expect 16bytes data)
Oct 6 13:52:30: TPLUS(000001BC)/0/READ: socket event 1
Oct 6 13:52:30: TPLUS(000001BC)/0/READ: read entire 28 bytes response
Oct 6 13:52:30: T+: Version 192 (0xC0), type 1, seq 4, encryption 1
Oct 6 13:52:30: T+: session_id 763084134 (0x2D7BBD66), dlen 16 (0x10)
Oct 6 13:52:30: T+: AUTHEN/REPLY status:5 flags:0x1 msg_len:10, data_len:0
Oct 6 13:52:30: T+: msg: Password:
Oct 6 13:52:30: T+: data:
Oct 6 13:52:30: T+: End Packet
Oct 6 13:52:30: TPLUS(000001BC)/0/46130160: Processing the reply packet
Oct 6 13:52:30: TPLUS: Received authen response status GET_PASSWORD (8)
Oct 6 13:52:37: TPLUS: Queuing AAA Authentication request 444 for processing
Oct 6 13:52:37: TPLUS: processing authentication continue request id 444
Oct 6 13:52:37: TPLUS: Authentication continue packet generated for 444
Oct 6 13:52:37: TPLUS(000001BC)/0/WRITE/46130160: Started 5 sec timeout
Oct 6 13:52:37: T+: Version 192 (0xC0), type 1, seq 5, encryption 1
Oct 6 13:52:37: T+: session_id 763084134 (0x2D7BBD66), dlen 16 (0x10)
Oct 6 13:52:37: T+: AUTHEN/CONT msg_len:11 (0xB), data_len:0 (0x0) flags:0x0
Oct 6 13:52:37: T+: User msg: <elided>
Oct 6 13:52:37: T+: User data:
Oct 6 13:52:37: T+: End Packet
Oct 6 13:52:37: TPLUS(000001BC)/0/WRITE: wrote entire 28 bytes request
Oct 6 13:52:37: TPLUS(000001BC)/0/READ: socket event 1
Oct 6 13:52:37: TPLUS(000001BC)/0/READ: read entire 12 header bytes (expect 33bytes data)
Oct 6 13:52:37: TPLUS(000001BC)/0/READ: socket event 1
Oct 6 13:52:37: TPLUS(000001BC)/0/READ: read entire 45 bytes response
Oct 6 13:52:37: T+: Version 192 (0xC0), type 1, seq 6, encryption 1
Oct 6 13:52:37: T+: session_id 763084134 (0x2D7BBD66), dlen 33 (0x21)
Oct 6 13:52:37: T+: AUTHEN/REPLY status:7 flags:0x0 msg_len:27, data_len:0
Oct 6 13:52:37: T+: msg: Error during authentication
Oct 6 13:52:37: T+: data:
Oct 6 13:52:37: T+: End Packet
Oct 6 13:52:37: TPLUS(000001BC)/0/46130160: Processing the reply packet
Oct 6 13:52:37: TPLUS: Received Authen status error
Oct 6 13:52:37: TPLUS(000001BC)/0/REQ_WAIT/46130160: timed out
Oct 6 13:52:37: TPLUS(000001BC)/0/REQ_WAIT/46130160: No sock_ctx found while handling request timeout
Oct 6 13:52:37: TPLUS: Choosing next server 101.34.5.143
Oct 6 13:52:37: TPLUS(000001BC)/1/NB_WAIT/46130160: Started 5 sec timeout
Oct 6 13:52:37: TPLUS(000001BC)/46130160: releasing old socket 0
Oct 6 13:52:37: TPLUS(000001BC)/1/46130160: Processing the reply packet
Oct 6 13:52:49: TPLUS: Queuing AAA Authentication request 444 for processing
Oct 6 13:52:49: TPLUS: processing authentication start request id 444
Oct 6 13:52:49: TPLUS: Authentication start packet created for 444()
Oct 6 13:52:49: TPLUS: Using server 172.24.5.143
Oct 6 13:52:49: TPLUS(000001BC)/0/NB_WAIT/46130160: Started 5 sec timeout
Oct 6 13:52:49: TPLUS(000001BC)/0/NB_WAIT: socket event 2
Oct 6 13:52:49: T+: Version 192 (0xC0), type 1, seq 1, encryption 1
Oct 6 13:52:49: T+: session_id 1523308383 (0x5ACBD75F), dlen 26 (0x1A)
Oct 6 13:52:49: T+: type:AUTHEN/START, priv_lvl:15 action:LOGIN ascii
Oct 6 13:52:49: T+: svc:LOGIN user_len:0 port_len:6 (0x6) raddr_len:12 (0xC) data_len:0
Oct 6 13:52:49: T+: user:
Oct 6 13:52:49: T+: port: tty515
Oct 6 13:52:49: T+: rem_addr: 10.10.10.10
Oct 6 13:52:49: T+: data:
Oct 6 13:52:49: T+: End Packet
Oct 6 13:52:49: TPLUS(000001BC)/0/NB_WAIT: wrote entire 38 bytes request
Oct 6 13:52:49: TPLUS(000001BC)/0/READ: socket event 1
Oct 6 13:52:49: TPLUS(000001BC)/0/READ: Would block while reading
Oct 6 13:52:49: TPLUS(000001BC)/0/READ: socket event 1
Oct 6 13:52:49: TPLUS(000001BC)/0/READ: read entire 12 header bytes (expect 43bytes data)
Oct 6 13:52:49: TPLUS(000001BC)/0/READ: socket event 1
Oct 6 13:52:49: TPLUS(000001BC)/0/READ: read entire 55 bytes response
Oct 6 13:52:49: T+: Version 192 (0xC0), type 1, seq 2, encryption 1
Oct 6 13:52:49: T+: session_id 1523308383 (0x5ACBD75F), dlen 43 (0x2B)
Oct 6 13:52:49: T+: AUTHEN/REPLY status:4 flags:0x0 msg_len:37, data_len:0
Oct 6 13:52:49: T+: msg: 0x0A User Access Verification 0x0A 0x0A Username:
Oct 6 13:52:49: T+: data:
Oct 6 13:52:49: T+: End Packet
Oct 6 13:52:49: TPLUS(000001BC)/0/46130160: Processing the reply packet
Oct 6 13:52:49: TPLUS: Received authen response status GET_USER (7)
The 1113 acs failed reports shows:
External DB is not operational
thanks,
james

Hi James,
We get External DB is not operational. Could you confirm if under External Databases > Unknown User Policy, and verify you have the AD/ Windows database at the top?
this error means the external server might not correctly configured on ACS external database section.
Another point is to make sure we have remote agent installed on supported windows server.
http://www.cisco.com/en/US/docs/net_mgmt/cisco_secure_access_control_server_for_solution_engine/4.2/installation/guide/remote_agent/rawi.html#wp289013
Also provide the Auth logs from the server running remote agent, e.g.:-
AUTH 10/25/2007 15:21:31 I 0376 1276 External DB [NTAuthenDLL.dll]:
Attempting Windows authentication for user v-michal
AUTH 10/25/2007 15:21:31 E 0376 1276 External DB [NTAuthenDLL.dll]: Windows
authentication FAILED (error 1783L)
thanks,
Vinay

Sun java directory server and Active Directory

We are using two different directory servers Sun java directory server and active directory.
My question is how we can have password synchronization between these two directory servers.
I have checked Sun Java[TM] System Identity Synchronization for Windows 1 2004Q3
http://www.sun.com/download/products.xml?id=41537425
It seems that it's supported platforms is only for solaris and windows , but I have installed my Sun java directory server on linux and obviously it doesn't work for me.
I would be grateful if anyone can suggest a solution to work around this situation.
I have checked identity manager , I would like to know that if I can do this using this product.
http://www.sun.com/software/products/identity_mgr/specs.jsp
--regards.
Sara

Yes RHEL 4 is a supported OS with DSEE 6.0.
Identity Synchronization for Windows is a part of DSEE that allows synchronization of users, passwords and groups between Sun Directory Server and Active Directory bi-directionally without altering the users environments, ie it does not require that users change their current habits.
Identity Manager is a complete identity management solution that is targetting enterprise work flow when it comes to user provisioning and de-provisioning, but also allows to build authentication and password change forms that will provision the passwords to many different systems including Sun Directory Server and Active Directory but also IBM mainframes, legacy applications, databases...
If you are implementing a complete identity management solution, then go with Identity Manager. If you need a lightweight and fast solution for just synchronizing users and passwords between Sun DS and MS AD, Identity Synchronization for Windows should be your choice.
Regards,
Ludovic.

### How to make integration between UCCX and Active Directory##

Hello,
I want to know what is the right procedure to perform a right integration between the UCCX and the Active Directory?
Waiting Yours Reply,,,,
Thanks a lot......

What version?
Assuming a current version (5.0 and higher): there is NO direct integration between CCX and Active Directory. The CCX server must not be joined to a domain.
CCX uses UC Manager End Users for synchronized usernames and passwords. If UC Manager is synchronized with an LDAP source, such as Active Directory, then this will carry forward to CCX. CCX would pass authentication requests to CCX through AXL. UCM would perform the LDAP authentication and inform CCX of the success/failure.

Cucm 9.1.2 and Active Directory(Windows Server 2003 Standart Edition SP2)

Hello!
Can CUCM 9.1.2 support an integration with Active Directory(Windows Server 2003 Standart Edition SP2)? How do I have to write down LDAP Manager Distinguished Name? I can find supporting only Active Directory 2003 in documentations without reference to Operation System.

Yes, it is possible.
Check this how-to if you have any doubts about the process.
http://blog.ipexpert.com/2010/04/28/cucm-and-active-directory-integration/
http://www.markholloway.com/blog/?p=1189

Difference between Windows NT domain registry and Active Directory registry

What are the difference(s) ?

Frank, thanks for your response :)
I want WebSphere Application Server to take advantage of a directory service. There are multiple options available for a directory service.
In my configuration the requirement is to make WebSphere Application server to use Microsoft's Active Directory.
While I was going through (WebSphere) documentation, I see following note.
" With Windows NT domain registry support for Windows 2000 and 2003 domain
controllers, WebSphere Application Server only supports Global groups that are the Security type. It is recommended that you use the Active Directory registry support rather than a Windows NT domain registry if you use Windows 2000 and 2003 domain controllers
because the Active Directory supports all group scopes and types. The Active Directory also supports a nested group that is not support by Windows NT domain registry. The Active Directory is a centralized control registry."
You can find the above note in this link (somewhere after 7th line)
http://www-01.ibm.com/support/knowledgecenter/SSAW57_7.0.0/com.ibm.websphere.nd.multiplatform.doc/info/ae/ae/csec_localos.html?cp=SSAW57_7.0.0%2F3-11-5-1-0-0
Does it mean that they are recommending to use Active Directory over Windows NT (which is an older approach) with windows server 2000 or windows server 2003 because Active directory is
advanced ?
I was under the impression that, Active Directory was started with Microsoft Windows Server 2003 and Windows NT registry was used till Windows 2000 server.
After going through above links,
Windows NT registry in an old method. However, it is compatible with Windows Server 2000 and Windows server 2003 but it is recommended to use Active directory with Windows Serve 2003 as it is more advanced. And the same is recommended in WebSphere documentation
(I am aware that support for Windows Server 2000 is over and only extended support is available for Windows Server 2003 however this is to clear doubt). Is my understanding correct ? And does windows server 2000 also support both i.e we can use either Windows
NT registry or Active directory and similarly, Either of them (Windows NT or Active Directory) could be used with Windows Server 2003 ?
And if I got it correct, Is Windows NT and Active Directory, both directory service offering from Microsoft? While NT being an old method and Active Directory being a new/advanced approach ?

Step by step process to create domain name and active directory in windows 7 64 bit

Step by step process to create domain and active directory in windows 7 64 bit
I work in an organization
I want to create a domain name SBBYDP and make it server for other computers
I want that, all users’ have a personal account while they use any computer from this organization, even they use any computer from this network they use their own account to login to network.
And this may be in Active directory option.
I installed windows 7 professional edition 64 bit
Can any person help me? Step by step process, I always thanks full all of you

Hi,
You must use the Windows Server platform system for the AD service, you can refer the following KB first:
Active Directory
http://technet.microsoft.com/en-us/library/bb742424.aspx
AD DS Deployment Guide
http://technet.microsoft.com/zh-cn/library/cc753963(v=ws.10).aspx
Hope this helps.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Event ID 91 Could not connect to the Active Directory. Active Directory Certificate Services

Could not connect to the Active Directory. Active Directory Certificate Services will retry when processing requires Active Directory access.
Event ID:      91
Task Category: None
Level:         Error
Keywords:      Classic
User:          SYSTEM
Computer:      DC1.chickbuns.com
Description:
Could not connect to the Active Directory. Active Directory Certificate Services will retry when processing requires Active Directory access.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
    <Provider Name="Microsoft-Windows-CertificationAuthority" Guid="{6A71D062-9AFE-4F35-AD08-52134F85DFB9}" EventSourceName="CertSvc" />
    <EventID Qualifiers="49754">91</EventID>
    <Version>0</Version>
    <Level>2</Level>
    <Task>0</Task>
    <Opcode>0</Opcode>
    <Keywords>0x80000000000000</Keywords>
    <TimeCreated SystemTime="2014-01-07T19:34:00.000000000Z" />
    <EventRecordID>819</EventRecordID>
    <Correlation />
    <Execution ProcessID="0" ThreadID="0" />
    <Channel>Application</Channel>
    <Computer>DC1.chickbuns.com</Computer>
    <Security UserID="S-1-5-18" />
</System>
<EventData Name="MSG_E_DS_RETRY">
</EventData>
</Event>
:\Users\Administrator>dcdiag /fix
Directory Server Diagnosis
Performing initial setup:
   Trying to find home server...
   Home Server = DC1
   * Identified AD Forest.
   Done gathering initial info.
Doing initial required tests
   Testing server: Default-First-Site-Name\DC1
      Starting test: Connectivity
         ......................... DC1 passed test Connectivity
Doing primary tests
   Testing server: Default-First-Site-Name\DC1
      Starting test: Advertising
         Warning: DC1 is not advertising as a time server.
         ......................... DC1 failed test Advertising
      Starting test: FrsEvent
         ......................... DC1 passed test FrsEvent
      Starting test: DFSREvent
         ......................... DC1 passed test DFSREvent
      Starting test: SysVolCheck
         ......................... DC1 passed test SysVolCheck
      Starting test: KccEvent
         ......................... DC1 passed test KccEvent
      Starting test: KnowsOfRoleHolders
         ......................... DC1 passed test KnowsOfRoleHolders
      Starting test: MachineAccount
         ......................... DC1 passed test MachineAccount
      Starting test: NCSecDesc
         ......................... DC1 passed test NCSecDesc
      Starting test: NetLogons
         ......................... DC1 passed test NetLogons
      Starting test: ObjectsReplicated
         ......................... DC1 passed test ObjectsReplicated
      Starting test: Replications
         ......................... DC1 passed test Replications
      Starting test: RidManager
         ......................... DC1 passed test RidManager
      Starting test: Services
         ......................... DC1 passed test Services
      Starting test: SystemLog
         ......................... DC1 passed test SystemLog
      Starting test: VerifyReferences
         ......................... DC1 passed test VerifyReferences
   Running partition tests on : ForestDnsZones
      Starting test: CheckSDRefDom
         ......................... ForestDnsZones passed test CheckSDRefDom
      Starting test: CrossRefValidation
         ......................... ForestDnsZones passed test
         CrossRefValidation
   Running partition tests on : DomainDnsZones
      Starting test: CheckSDRefDom
         ......................... DomainDnsZones passed test CheckSDRefDom
      Starting test: CrossRefValidation
         ......................... DomainDnsZones passed test
         CrossRefValidation
   Running partition tests on : Schema
      Starting test: CheckSDRefDom
         ......................... Schema passed test CheckSDRefDom
      Starting test: CrossRefValidation
         ......................... Schema passed test CrossRefValidation
   Running partition tests on : Configuration
      Starting test: CheckSDRefDom
         ......................... Configuration passed test CheckSDRefDom
      Starting test: CrossRefValidation
         ......................... Configuration passed test CrossRefValidation
   Running partition tests on : chickbuns
      Starting test: CheckSDRefDom
         ......................... chickbuns passed test CheckSDRefDom
      Starting test: CrossRefValidation
         ......................... chickbuns passed test CrossRefValidation
   Running enterprise tests on : chickbuns.com
      Starting test: LocatorCheck
         Warning: DcGetDcName(TIME_SERVER) call failed, error 1355
         A Time Server could not be located.
         The server holding the PDC role is down.
         Warning: DcGetDcName(GOOD_TIME_SERVER_PREFERRED) call failed, error
         1355
         A Good Time Server could not be located.
         ......................... chickbuns.com failed test LocatorCheck
      Starting test: Intersite
         ......................... chickbuns.com passed test Intersite.

My test lab one sinle domain controller server 2008 R2 Sp1 and member exchange server is using,the event error 91 is generated as per the technet article http://technet.microsoft.com/en-us/library/cc774525(v=ws.10).aspx the  domain
computer and domain users in public key services container is not listed ..
C:\Users\Administrator>netdom /query fsmo
Schema master DC1.chickbuns.com
Domain naming master DC1.chickbuns.com
PDC DC1.chickbuns.com
RID pool manager DC1.chickbuns.com
Infrastructure master DC1.chickbuns.com
The command completed successfully.
Command Line: "dcdiag.exe
/V /D /C /E"
Directory Server Diagnosis
Performing initial setup:
Trying to find home server...
* Verifying that the local machine DC1, is a Directory Server.
Home Server = DC1
* Connecting to directory service on server DC1.
DC1.currentTime = 20140110072353.0Z
DC1.highestCommittedUSN = 131148
DC1.isSynchronized = 1
DC1.isGlobalCatalogReady = 1
* Identified AD Forest.
Collecting AD specific global data
* Collecting site info.
Calling ldap_search_init_page(hld,CN=Sites,CN=Configuration,DC=chickbuns,DC=com,LDAP_SCOPE_SUBTREE,(objectCategory=ntDSSiteSettings),.......
The previous call succeeded
Iterating through the sites
Looking at base site object: CN=NTDS Site Settings,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=chickbuns,DC=com
Getting ISTG and options for the site
* Identifying all servers.
Calling ldap_search_init_page(hld,CN=Sites,CN=Configuration,DC=chickbuns,DC=com,LDAP_SCOPE_SUBTREE,(objectClass=ntDSDsa),.......
The previous call succeeded....
The previous call succeeded
Iterating through the list of servers
Getting information for the server CN=NTDS Settings,CN=DC1,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=chickbuns,DC=com
objectGuid obtained
InvocationID obtained
dnsHostname obtained
site info obtained
All the info for the server collected
DC1.currentTime = 20140110072353.0Z
DC1.highestCommittedUSN = 131148
DC1.isSynchronized = 1
DC1.isGlobalCatalogReady = 1
* Identifying all NC cross-refs.
* Found 1 DC(s). Testing 1 of them.
Done gathering initial info.
===============================================Printing out pDsInfo
GLOBAL:
ulNumServers=1
pszRootDomain=chickbuns.com
pszNC=
pszRootDomainFQDN=DC=chickbuns,DC=com
pszConfigNc=CN=Configuration,DC=chickbuns,DC=com
pszPartitionsDn=CN=Partitions,CN=Configuration,DC=chickbuns,DC=com
fAdam=0
iSiteOptions=0
dwTombstoneLifeTimeDays=180
dwForestBehaviorVersion=3
HomeServer=0, DC1
SERVER: pServer[0].pszName=DC1
pServer[0].pszGuidDNSName (binding str)=771aab3d-96cd-4fb1-90cd-0899fa6b6207._msdcs.chickbuns.com
pServer[0].pszDNSName=DC1.chickbuns.com
pServer[0].pszLdapPort=(null)
pServer[0].pszSslPort=(null)
pServer[0].pszDn=CN=NTDS Settings,CN=DC1,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=chickbuns,DC=com
pServer[0].pszComputerAccountDn=CN=DC1,OU=Domain Controllers,DC=chickbuns,DC=com
pServer[0].uuidObjectGuid=771aab3d-96cd-4fb1-90cd-0899fa6b6207
pServer[0].uuidInvocationId=771aab3d-96cd-4fb1-90cd-0899fa6b6207
pServer[0].iSite=0 (Default-First-Site-Name)
pServer[0].iOptions=1
pServer[0].ftLocalAcquireTime=ea9513a0 01cf0dd4
pServer[0].ftRemoteConnectTime=ea2bca80 01cf0dd4
pServer[0].ppszMaster/FullReplicaNCs:
ppszMaster/FullReplicaNCs[0]=DC=ForestDnsZones,DC=chickbuns,DC=com
ppszMaster/FullReplicaNCs[1]=DC=DomainDnsZones,DC=chickbuns,DC=com
ppszMaster/FullReplicaNCs[2]=CN=Schema,CN=Configuration,DC=chickbuns,DC=com
ppszMaster/FullReplicaNCs[3]=CN=Configuration,DC=chickbuns,DC=com
ppszMaster/FullReplicaNCs[4]=DC=chickbuns,DC=com
SITES: pSites[0].pszName=Default-First-Site-Name
pSites[0].pszSiteSettings=CN=NTDS Site Settings,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=chickbuns,DC=com
pSites[0].pszISTG=CN=NTDS Settings,CN=DC1,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=chickbuns,DC=com
pSites[0].iSiteOption=0
pSites[0].cServers=1
NC: pNCs[0].pszName=ForestDnsZones
pNCs[0].pszDn=DC=ForestDnsZones,DC=chickbuns,DC=com
pNCs[0].aCrInfo[0].dwFlags=0x00000201
pNCs[0].aCrInfo[0].pszDn=CN=5fc582f9-b435-49a1-aa54-41769fc24206,CN=Partitions,CN=Configuration,DC=chickbuns,DC=com
pNCs[0].aCrInfo[0].pszDnsRoot=ForestDnsZones.chickbuns.com
pNCs[0].aCrInfo[0].iSourceServer=0
pNCs[0].aCrInfo[0].pszSourceServer=(null)
pNCs[0].aCrInfo[0].ulSystemFlags=0x00000005
pNCs[0].aCrInfo[0].bEnabled=TRUE
pNCs[0].aCrInfo[0].ftWhenCreated=00000000 00000000
pNCs[0].aCrInfo[0].pszSDReferenceDomain=(null)
pNCs[0].aCrInfo[0].pszNetBiosName=(null)
pNCs[0].aCrInfo[0].cReplicas=-1
pNCs[0].aCrInfo[0].aszReplicas=
NC: pNCs[1].pszName=DomainDnsZones
pNCs[1].pszDn=DC=DomainDnsZones,DC=chickbuns,DC=com
pNCs[1].aCrInfo[0].dwFlags=0x00000201
pNCs[1].aCrInfo[0].pszDn=CN=9e1c2cb8-b90b-4e9f-90dd-9903f935e4af,CN=Partitions,CN=Configuration,DC=chickbuns,DC=com
pNCs[1].aCrInfo[0].pszDnsRoot=DomainDnsZones.chickbuns.com
pNCs[1].aCrInfo[0].iSourceServer=0
pNCs[1].aCrInfo[0].pszSourceServer=(null)
pNCs[1].aCrInfo[0].ulSystemFlags=0x00000005
pNCs[1].aCrInfo[0].bEnabled=TRUE
pNCs[1].aCrInfo[0].ftWhenCreated=00000000 00000000
pNCs[1].aCrInfo[0].pszSDReferenceDomain=(null)
pNCs[1].aCrInfo[0].pszNetBiosName=(null)
pNCs[1].aCrInfo[0].cReplicas=-1
pNCs[1].aCrInfo[0].aszReplicas=
NC: pNCs[2].pszName=Schema
pNCs[2].pszDn=CN=Schema,CN=Configuration,DC=chickbuns,DC=com
pNCs[2].aCrInfo[0].dwFlags=0x00000201
pNCs[2].aCrInfo[0].pszDn=CN=Enterprise Schema,CN=Partitions,CN=Configuration,DC=chickbuns,DC=com
pNCs[2].aCrInfo[0].pszDnsRoot=chickbuns.com
pNCs[2].aCrInfo[0].iSourceServer=0
pNCs[2].aCrInfo[0].pszSourceServer=(null)
pNCs[2].aCrInfo[0].ulSystemFlags=0x00000001
pNCs[2].aCrInfo[0].bEnabled=TRUE
pNCs[2].aCrInfo[0].ftWhenCreated=00000000 00000000
pNCs[2].aCrInfo[0].pszSDReferenceDomain=(null)
pNCs[2].aCrInfo[0].pszNetBiosName=(null)
pNCs[2].aCrInfo[0].cReplicas=-1
pNCs[2].aCrInfo[0].aszReplicas=
NC: pNCs[3].pszName=Configuration
pNCs[3].pszDn=CN=Configuration,DC=chickbuns,DC=com
pNCs[3].aCrInfo[0].dwFlags=0x00000201
pNCs[3].aCrInfo[0].pszDn=CN=Enterprise Configuration,CN=Partitions,CN=Configuration,DC=chickbuns,DC=com
pNCs[3].aCrInfo[0].pszDnsRoot=chickbuns.com
pNCs[3].aCrInfo[0].iSourceServer=0
pNCs[3].aCrInfo[0].pszSourceServer=(null)
pNCs[3].aCrInfo[0].ulSystemFlags=0x00000001
pNCs[3].aCrInfo[0].bEnabled=TRUE
pNCs[3].aCrInfo[0].ftWhenCreated=00000000 00000000
pNCs[3].aCrInfo[0].pszSDReferenceDomain=(null)
pNCs[3].aCrInfo[0].pszNetBiosName=(null)
pNCs[3].aCrInfo[0].cReplicas=-1
pNCs[3].aCrInfo[0].aszReplicas=
NC: pNCs[4].pszName=chickbuns
pNCs[4].pszDn=DC=chickbuns,DC=com
pNCs[4].aCrInfo[0].dwFlags=0x00000201
pNCs[4].aCrInfo[0].pszDn=CN=CHICKBUNS,CN=Partitions,CN=Configuration,DC=chickbuns,DC=com
pNCs[4].aCrInfo[0].pszDnsRoot=chickbuns.com
pNCs[4].aCrInfo[0].iSourceServer=0
pNCs[4].aCrInfo[0].pszSourceServer=(null)
pNCs[4].aCrInfo[0].ulSystemFlags=0x00000003
pNCs[4].aCrInfo[0].bEnabled=TRUE
pNCs[4].aCrInfo[0].ftWhenCreated=00000000 00000000
pNCs[4].aCrInfo[0].pszSDReferenceDomain=(null)
pNCs[4].aCrInfo[0].pszNetBiosName=(null)
pNCs[4].aCrInfo[0].cReplicas=-1
pNCs[4].aCrInfo[0].aszReplicas=
5 NC TARGETS: ForestDnsZones, DomainDnsZones, Schema, Configuration, chickbuns,
1 TARGETS: DC1,
=============================================Done Printing pDsInfo
Doing initial required tests
Testing server: Default-First-Site-Name\DC1
Starting test: Connectivity
* Active Directory LDAP Services Check
Determining IP4 connectivity
Failure Analysis: DC1 ... OK.
* Active Directory RPC Services Check
......................... DC1 passed test Connectivity
Doing primary tests
Testing server: Default-First-Site-Name\DC1
Starting test: Advertising
The DC DC1 is advertising itself as a DC and having a DS.
The DC DC1 is advertising as an LDAP server
The DC DC1 is advertising as having a writeable directory
The DC DC1 is advertising as a Key Distribution Center
The DC DC1 is advertising as a time server
The DS DC1 is advertising as a GC.
......................... DC1 passed test Advertising
Starting test: CheckSecurityError
* Dr Auth: Beginning security errors check!
Found KDC DC1 for domain chickbuns.com in site Default-First-Site-Name
Checking machine account for DC DC1 on DC DC1.
* SPN found :LDAP/DC1.chickbuns.com/chickbuns.com
* SPN found :LDAP/DC1.chickbuns.com
* SPN found :LDAP/DC1
* SPN found :LDAP/DC1.chickbuns.com/CHICKBUNS
* SPN found :LDAP/771aab3d-96cd-4fb1-90cd-0899fa6b6207._msdcs.chickbuns.com
* SPN found :E3514235-4B06-11D1-AB04-00C04FC2DCD2/771aab3d-96cd-4fb1-90cd-0899fa6b6207/chickbuns.com
* SPN found :HOST/DC1.chickbuns.com/chickbuns.com
* SPN found :HOST/DC1.chickbuns.com
* SPN found :HOST/DC1
* SPN found :HOST/DC1.chickbuns.com/CHICKBUNS
* SPN found :GC/DC1.chickbuns.com/chickbuns.com
[DC1] No security related replication errors were found on this DC!
To target the connection to a specific source DC use /ReplSource:<DC>.
......................... DC1 passed test CheckSecurityError
Starting test: CutoffServers
* Configuration Topology Aliveness Check
* Analyzing the alive system replication topology for DC=ForestDnsZones,DC=chickbuns,DC=com.
* Performing upstream (of target) analysis.
* Performing downstream (of target) analysis.
* Analyzing the alive system replication topology for DC=DomainDnsZones,DC=chickbuns,DC=com.
* Performing upstream (of target) analysis.
* Performing downstream (of target) analysis.
* Analyzing the alive system replication topology for CN=Schema,CN=Configuration,DC=chickbuns,DC=com.
* Performing upstream (of target) analysis.
* Performing downstream (of target) analysis.
* Analyzing the alive system replication topology for CN=Configuration,DC=chickbuns,DC=com.
* Performing upstream (of target) analysis.
* Performing downstream (of target) analysis.
* Analyzing the alive system replication topology for DC=chickbuns,DC=com.
* Performing upstream (of target) analysis.
* Performing downstream (of target) analysis.
......................... DC1 passed test CutoffServers
Starting test: FrsEvent
* The File Replication Service Event log test
Skip the test because the server is running DFSR.
......................... DC1 passed test FrsEvent
Starting test: DFSREvent
The DFS Replication Event Log.
......................... DC1 passed test DFSREvent
Starting test: SysVolCheck
* The File Replication Service SYSVOL ready test
File Replication Service's SYSVOL is ready
......................... DC1 passed test SysVolCheck
Starting test: FrsSysVol
* The File Replication Service SYSVOL ready test
File Replication Service's SYSVOL is ready
......................... DC1 passed test FrsSysVol
Starting test: KccEvent
* The KCC Event log test
Found no KCC errors in "Directory Service" Event log in the last 15 minutes.
......................... DC1 passed test KccEvent
Starting test: KnowsOfRoleHolders
Role Schema Owner = CN=NTDS Settings,CN=DC1,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=chickbuns,DC=com
Role Domain Owner = CN=NTDS Settings,CN=DC1,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=chickbuns,DC=com
Role PDC Owner = CN=NTDS Settings,CN=DC1,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=chickbuns,DC=com
Role Rid Owner = CN=NTDS Settings,CN=DC1,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=chickbuns,DC=com
Role Infrastructure Update Owner = CN=NTDS Settings,CN=DC1,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=chickbuns,DC=com
......................... DC1 passed test KnowsOfRoleHolders
Starting test: MachineAccount
Checking machine account for DC DC1 on DC DC1.
* SPN found :LDAP/DC1.chickbuns.com/chickbuns.com
* SPN found :LDAP/DC1.chickbuns.com
* SPN found :LDAP/DC1
* SPN found :LDAP/DC1.chickbuns.com/CHICKBUNS
* SPN found :LDAP/771aab3d-96cd-4fb1-90cd-0899fa6b6207._msdcs.chickbuns.com
* SPN found :E3514235-4B06-11D1-AB04-00C04FC2DCD2/771aab3d-96cd-4fb1-90cd-0899fa6b6207/chickbuns.com
* SPN found :HOST/DC1.chickbuns.com/chickbuns.com
* SPN found :HOST/DC1.chickbuns.com
* SPN found :HOST/DC1
* SPN found :HOST/DC1.chickbuns.com/CHICKBUNS
* SPN found :GC/DC1.chickbuns.com/chickbuns.com
......................... DC1 passed test MachineAccount
Starting test: NCSecDesc
* Security Permissions check for all NC's on DC DC1.
* Security Permissions Check for
DC=ForestDnsZones,DC=chickbuns,DC=com
(NDNC,Version 3)
* Security Permissions Check for
DC=DomainDnsZones,DC=chickbuns,DC=com
(NDNC,Version 3)
* Security Permissions Check for
CN=Schema,CN=Configuration,DC=chickbuns,DC=com
(Schema,Version 3)
* Security Permissions Check for
CN=Configuration,DC=chickbuns,DC=com
(Configuration,Version 3)
* Security Permissions Check for
DC=chickbuns,DC=com
(Domain,Version 3)
......................... DC1 passed test NCSecDesc
Starting test: NetLogons
* Network Logons Privileges Check
Verified share \\DC1\netlogon
Verified share \\DC1\sysvol
......................... DC1 passed test NetLogons
Starting test: ObjectsReplicated
DC1 is in domain DC=chickbuns,DC=com
Checking for CN=DC1,OU=Domain Controllers,DC=chickbuns,DC=com in domain DC=chickbuns,DC=com on 1 servers
Object is up-to-date on all servers.
Checking for CN=NTDS Settings,CN=DC1,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=chickbuns,DC=com in domain CN=Configuration,DC=chickbuns,DC=com on 1 servers
Object is up-to-date on all servers.
......................... DC1 passed test ObjectsReplicated
Starting test: OutboundSecureChannels
* The Outbound Secure Channels test
** Did not run Outbound Secure Channels test because /testdomain: was
not entered
......................... DC1 passed test OutboundSecureChannels
Starting test: Replications
* Replications Check
DC=ForestDnsZones,DC=chickbuns,DC=com has 1 cursors.
DC=DomainDnsZones,DC=chickbuns,DC=com has 1 cursors.
CN=Schema,CN=Configuration,DC=chickbuns,DC=com has 1 cursors.
CN=Configuration,DC=chickbuns,DC=com has 1 cursors.
DC=chickbuns,DC=com has 1 cursors.
* Replication Latency Check
......................... DC1 passed test Replications
Starting test: RidManager
ridManagerReference = CN=RID Manager$,CN=System,DC=chickbuns,DC=com
* Available RID Pool for the Domain is 1600 to 1073741823
fSMORoleOwner = CN=NTDS Settings,CN=DC1,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=chickbuns,DC=com
* DC1.chickbuns.com is the RID Master
* DsBind with RID Master was successful
rIDSetReferences = CN=RID Set,CN=DC1,OU=Domain Controllers,DC=chickbuns,DC=com
* rIDAllocationPool is 1100 to 1599
* rIDPreviousAllocationPool is 1100 to 1599
* rIDNextRID: 1103
......................... DC1 passed test RidManager
Starting test: Services
* Checking Service: EventSystem
* Checking Service: RpcSs
* Checking Service: NTDS
* Checking Service: DnsCache
* Checking Service: DFSR
* Checking Service: IsmServ
* Checking Service: kdc
* Checking Service: SamSs
* Checking Service: LanmanServer
* Checking Service: LanmanWorkstation
* Checking Service: w32time
* Checking Service: NETLOGON
......................... DC1 passed test Services
Starting test: SystemLog
* The System Event log test
Found no errors in "System" Event log in the last 60 minutes.
......................... DC1 passed test SystemLog
Starting test: Topology
* Configuration Topology Integrity Check
* Analyzing the connection topology for DC=ForestDnsZones,DC=chickbuns,DC=com.
* Performing upstream (of target) analysis.
* Performing downstream (of target) analysis.
* Analyzing the connection topology for DC=DomainDnsZones,DC=chickbuns,DC=com.
* Performing upstream (of target) analysis.
* Performing downstream (of target) analysis.
* Analyzing the connection topology for CN=Schema,CN=Configuration,DC=chickbuns,DC=com.
* Performing upstream (of target) analysis.
* Performing downstream (of target) analysis.
* Analyzing the connection topology for CN=Configuration,DC=chickbuns,DC=com.
* Performing upstream (of target) analysis.
* Performing downstream (of target) analysis.
* Analyzing the connection topology for DC=chickbuns,DC=com.
* Performing upstream (of target) analysis.
* Performing downstream (of target) analysis.
......................... DC1 passed test Topology
Starting test: VerifyEnterpriseReferences
......................... DC1 passed test VerifyEnterpriseReferences
Starting test: VerifyReferences
The system object reference (serverReference)
CN=DC1,OU=Domain Controllers,DC=chickbuns,DC=com and backlink on
CN=DC1,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=chickbuns,DC=com
are correct.
The system object reference (serverReferenceBL)
CN=DC1,CN=Topology,CN=Domain System Volume,CN=DFSR-GlobalSettings,CN=System,DC=chickbuns,DC=com
and backlink on
CN=NTDS Settings,CN=DC1,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=chickbuns,DC=com
are correct.
The system object reference (msDFSR-ComputerReferenceBL)
CN=DC1,CN=Topology,CN=Domain System Volume,CN=DFSR-GlobalSettings,CN=System,DC=chickbuns,DC=com
and backlink on CN=DC1,OU=Domain Controllers,DC=chickbuns,DC=com are
correct.
......................... DC1 passed test VerifyReferences
Starting test: VerifyReplicas
......................... DC1 passed test VerifyReplicas
Starting test: DNS
DNS Tests are running and not hung. Please wait a few minutes...
See DNS test in enterprise tests section for results
......................... DC1 passed test DNS
Running partition tests on : ForestDnsZones
Starting test: CheckSDRefDom
......................... ForestDnsZones passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... ForestDnsZones passed test
CrossRefValidation
Running partition tests on : DomainDnsZones
Starting test: CheckSDRefDom
......................... DomainDnsZones passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... DomainDnsZones passed test
CrossRefValidation
Running partition tests on : Schema
Starting test: CheckSDRefDom
......................... Schema passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... Schema passed test CrossRefValidation
Running partition tests on : Configuration
Starting test: CheckSDRefDom
......................... Configuration passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... Configuration passed test CrossRefValidation
Running partition tests on : chickbuns
Starting test: CheckSDRefDom
......................... chickbuns passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... chickbuns passed test CrossRefValidation
Running enterprise tests on : chickbuns.com
Starting test: DNS
Test results for domain controllers:
DC: DC1.chickbuns.com
Domain: chickbuns.com
TEST: Authentication (Auth)
Authentication test: Successfully completed
TEST: Basic (Basc)
The OS
Microsoft Windows Server 2008 R2 Enterprise (Service Pack level: 1.0)
is supported.
NETLOGON service is running
kdc service is running
DNSCACHE service is running
DNS service is running
DC is a DNS server
Network adapters information:
Adapter [00000007] Intel(R) PRO/1000 MT Network Connection:
MAC address is 00:0C:29:DE:7F:EB
IP Address is static
IP address: 192.168.1.30
DNS servers:
192.168.1.30 (dc1.chickbuns.com.) [Valid]
The A host record(s) for this DC was found
The SOA record for the Active Directory zone was found
The Active Directory zone on this DC/DNS server was found primary
Root zone on this DC/DNS server was not found
TEST: Forwarders/Root hints (Forw)
Recursion is enabled
Forwarders Information:
192.168.1.1 (<name unavailable>) [Valid]
TEST: Delegations (Del)
Delegation information for the zone: chickbuns.com.
Delegated domain name: _msdcs.chickbuns.com.
DNS server: dc1.chickbuns.com. IP:192.168.1.30 [Valid]
TEST: Dynamic update (Dyn)
Test record dcdiag-test-record added successfully in zone chickbuns.com
Test record dcdiag-test-record deleted successfully in zone chickbuns.com
TEST: Records registration (RReg)
Network Adapter
[00000007] Intel(R) PRO/1000 MT Network Connection:
Matching CNAME record found at DNS server 192.168.1.30:
771aab3d-96cd-4fb1-90cd-0899fa6b6207._msdcs.chickbuns.com
Matching A record found at DNS server 192.168.1.30:
DC1.chickbuns.com
Matching SRV record found at DNS server 192.168.1.30:
_ldap._tcp.chickbuns.com
Matching SRV record found at DNS server 192.168.1.30:
_ldap._tcp.48c41195-2630-4461-aaef-ec2a63cd8bf3.domains._msdcs.chickbuns.com
Matching SRV record found at DNS server 192.168.1.30:
_kerberos._tcp.dc._msdcs.chickbuns.com
Matching SRV record found at DNS server 192.168.1.30:
_ldap._tcp.dc._msdcs.chickbuns.com
Matching SRV record found at DNS server 192.168.1.30:
_kerberos._tcp.chickbuns.com
Matching SRV record found at DNS server 192.168.1.30:
_kerberos._udp.chickbuns.com
Matching SRV record found at DNS server 192.168.1.30:
_kpasswd._tcp.chickbuns.com
Matching SRV record found at DNS server 192.168.1.30:
_ldap._tcp.Default-First-Site-Name._sites.chickbuns.com
Matching SRV record found at DNS server 192.168.1.30:
_kerberos._tcp.Default-First-Site-Name._sites.dc._msdcs.chickbuns.com
Matching SRV record found at DNS server 192.168.1.30:
_ldap._tcp.Default-First-Site-Name._sites.dc._msdcs.chickbuns.com
Matching SRV record found at DNS server 192.168.1.30:
_kerberos._tcp.Default-First-Site-Name._sites.chickbuns.com
Matching SRV record found at DNS server 192.168.1.30:
_ldap._tcp.gc._msdcs.chickbuns.com
Matching A record found at DNS server 192.168.1.30:
gc._msdcs.chickbuns.com
Matching SRV record found at DNS server 192.168.1.30:
_gc._tcp.Default-First-Site-Name._sites.chickbuns.com
Matching SRV record found at DNS server 192.168.1.30:
_ldap._tcp.Default-First-Site-Name._sites.gc._msdcs.chickbuns.com
Matching SRV record found at DNS server 192.168.1.30:
_ldap._tcp.pdc._msdcs.chickbuns.com
Total query time:0 min. 3 sec.. Total RPC connection
time:0 min. 0 sec.
Total WMI connection time:0 min. 6 sec. Total Netuse connection
time:0 min. 0 sec.
Summary of test results for DNS servers used by the above domain
controllers:
DNS server: 192.168.1.1 (<name unavailable>)
All tests passed on this DNS server
Total query time:0 min. 0 sec., Total WMI connection
time:0 min. 5 sec.
DNS server: 192.168.1.30 (dc1.chickbuns.com.)
All tests passed on this DNS server
Name resolution is functional._ldap._tcp SRV record for the forest root domain is registered
DNS delegation for the domain _msdcs.chickbuns.com. is operational on IP 192.168.1.30
Total query time:0 min. 3 sec., Total WMI connection
time:0 min. 0 sec.
Summary of DNS test results:
Auth Basc Forw Del Dyn RReg Ext
Domain: chickbuns.com
DC1 PASS PASS PASS PASS PASS PASS n/a
Total Time taken to test all the DCs:0 min. 9 sec.
......................... chickbuns.com passed test DNS
Starting test: LocatorCheck
GC Name: \\DC1.chickbuns.com
Locator Flags: 0xe00033fd
PDC Name: \\DC1.chickbuns.com
Locator Flags: 0xe00033fd
Time Server Name: \\DC1.chickbuns.com
Locator Flags: 0xe00033fd
Preferred Time Server Name: \\DC1.chickbuns.com
Locator Flags: 0xe00033fd
KDC Name: \\DC1.chickbuns.com
Locator Flags: 0xe00033fd
......................... chickbuns.com passed test LocatorCheck
Starting test: FsmoCheck
GC Name: \\DC1.chickbuns.com
Locator Flags: 0xe00033fd
PDC Name: \\DC1.chickbuns.com
Locator Flags: 0xe00033fd
Time Server Name: \\DC1.chickbuns.com
Locator Flags: 0xe00033fd
Preferred Time Server Name: \\DC1.chickbuns.com
Locator Flags: 0xe00033fd
KDC Name: \\DC1.chickbuns.com
Locator Flags: 0xe00033fd
......................... chickbuns.com passed test FsmoCheck
Starting test: Intersite
Skipping site Default-First-Site-Name, this site is outside the scope
provided by the command line arguments provided.
......................... chickbuns.com passed test Intersite

Could not connect to the Active Directory. Active Directory Certificate Services will retry when processing requires Active Directory access

Event properties – Event 91, Level Error, Event ID 91, Date and time 5/10/2012 11:29:48AM, Service CertificationAuthority
General:
Could not connect to the Active Directory.
Active Directory Certificate Services will retry when processing requires Active Directory access.
We have a Windows 2008 Server Enterprise with AD . I would like to enable the service "Certificate Services" that
allow me to enable radius to authenticate users wireless with the active directory.

Hi,
Can you please check this forum or someone from Microsoft, as we have post here dating back from October that are not being answered.
Everything for us is exactly the same as szucsati and Racom
NMNM,
Please give us an answer on this as the link provided is absolutely useless.
Thank you.

GRC CUP how to pull manager from Global directory or Active directory

Hi,
how can i pull manager from global directory or active directory as approver.We are designing dual control approval process.First manager from global directory can approve then role owner.In workflow stages i can only see approvers information has to be entered manaually in CAD.Also i am looking when requestor requesting request,it should automatically fetch manager information on the request page,once user id selected.
Thanks
Mushu

Dear Mushu,
Two things you need to do
1.) Maintain the Manager's Field in Active Directory and do mapping in CUP>Configuration>Field Mapping-->LDAP Mapping
2.) Keep LDAP as authentication system so that whenever a User has to log into the CUP he will do using his network id and his manager is automatically pulled from Active Directory.
Then in the workflow you can keep the approver determinator as Manager by which the request will routed to the appropriate manager. Hope that helps.
Edited by: celestemay17 on Dec 8, 2010 12:05 PM

Physical directory and logical directory

What is the difference between physical directory and logical directory in BPEL

Hi,
Physical : We need to Specify the complete directory.
Example: <Drive name>:\Temp\data
Logical: We need to specify a logical name for directory. It is defined as a property in the 'bpel.xml' file.
Example: if you specify 'READ' as the logical name, the following property is added to the bpel.xml file: <property name="READ"></property>
After this, u must have define the directory path.
For example, <Drive name>:\Temp\data for the file adapter: <property name="MyDirectory"><Drive name>:\Temp\data </property>
cheers,
Abhi

DNS and Active Directory error 4000 server 2008

Hello all,
My network skills aren't very good and I'm facing a dilemma. First off we have two Windows servers on the network. The newest is 2008 Standard (named Vader) and the other is 2000 (dells3). Obviously I'd like to get rid of the 2000, but the people in charge
of my budget haven't given me the option to do so and it's the only back up we have.
Earlier in the week we had lots of problems. One of our nas boxes locked everyone out who was mapped to it and it would only let me log in through the web portal. Two of our Macs our marketing department uses suddenly locked up and wouldn't let them back
in (both were part of the Active Directory). A second nas box won't let certain people map to it and for awhile I had issues logging into Vader itself.
I believe all of these problems are connected to some issues on Vader and possibly in conduction with dells3. In Server Manager under DNS I get error 4000 "The DNS server was unable to open Active Directory.
This DNS server is configured to obtain and use information from the directory for this zone and is unable to load the zone without it. Check that the Active Directory is functioning properly and reload the zone. The event data is the error code."
Then under Active Directory Domain Services I get error 2042 "It has been too long since this machine last replicated with the named source machine. The time between replications with this source has exceeded
the tombstone lifetime. Replication has been stopped with this source."
Followed by more text I can post if needed.
Under File Services error 1202 "The DFS Replication service failed to contact domain controller to access configuration information. Replication is stopped. The service will try again during the
next configuration polling cycle, which will occur in 60 minutes. This event can be caused by TCP/IP connectivity, firewall, Active Directory Domain Services, or DNS issues."
And finally if I try to open Active Directory Domains and Trusts "The configuration information describing this enterprise is not available. The server is not operational."
I'm not sure where to start or what to post that might help. Any and all help is appreciated.
Edit: Also I can only add dells3 as the DNS on Vader in the DNS Manager if I try to add Vader to itself I get an error.

It's the other way around. Overall, I'm advising ripping the 2008 server out of AD and adding it back . Let's look at this as a series of steps:
1.) You do a force demote of the 2008 server because it's tombstoned. This means the 2008 server is no longer a DC. You are doing a force because it doesn't have the ability to replicate. If it could replicate, we'd just do a graceful demotion
and be done with it.
2.) Once the 2008 server is demoted, we go to the 2000 server which holds the only good copy of AD. From that server we run a metadata cleanup using the ntdsutil utility. We use that utility to clean out references to the 2008 server which is
no longer a DC.
3.) Once you have a clean AD, you can then promote the 2008 server back into Active Directory. Make sure Vader is pointing to Dells3 as its primary DNS server before promoting or you'll run into issues.
Hopefully that clarifies things.

Mobile Account and Active Directory home folder

We install a XServe server (Mac OS X 10.6.3). We join it to Active Directory for authentification and Open Directory for policy. I read the magic triangle on the web.
I mount a MacBook Pro with Mac OS X 10.6. I join it to AD and after to OD. When I configure an account to be mobile, the home folder configure in AD stop to mount automatically. If the account is not mobile the home folder mount correctly.
Somebody has an idea of waht happen?

Hello, sifeduc, and welcome to the AppleBoards,
This really seems like a Directory Services question and is probably best suited to this board: http://discussions.apple.com/forum.jspa?forumID=1353
That being said are you talking about Portable Home Directories? If so PHDs should be created on the server first and on the client second. If you have a client account you want to sync to the OD you need to delete the client account - *but leave it in place* - create a server account and then use the local account which will then sync to the server. The steps for this are a little more complicated than that but not much.
Good Luck,
=Tod

Word 2013 and Active Directory attribut

Hi,
I'm working with WS2008R2 SP1 AD and Office standard 2013 and W7 SP1 x64. Our compagny wants to create .dotm/.dotx with automatic fields.
For example, we want that when a user opens a .dotx his name appears automatically. This one is easy it's the {AUTHOR \*MERGEFORMAT}.
But What we want to do is to do the same for the:
- street adress
- email adress
- the job title
All informations are in our Active Directory, but it seems that Word does not read directly the Active Directory info but some cached info on the computer.
So, is there a way or workaround to create some .dotx with the possibility to extrat some AD fields attribut attached with some user and at the end to build a semi automatic doc with the information of the user who has open this .dotx/.dotm?
So far, clues say that I have to write some vba script and 2 kind of solution/workaround:
The first lead is:
To retrieve the user account properties from Active Directory, we have to turn to some VBA scripts, no way to achieve this via any built-in features.
As far as I know, you can bind to the user account object by using the
GetObject function and the LDAP provider.
Then use the GetInfo method to initialize the local cache with attributes of the user account object. This step will ensure that the most up-to-date attribute values of the ADSI object are retrieved.
For example:
Set objUser = GetObject _
("LDAP://...")
objUser.GetInfo
If you want to get this attributes when you create a new document based on a template (.dotx/.dotm), you'll need to use the
AutoNew macro.
the second lead is:
http://heureuxoli.developpez.com/office/word/creermodele/#L2-G
Thank you in advance for any king od answer.
best regards

Hello,
Have you tried these two methods? What is the result and what is your decision?
If you're familiar with Visual Studio IDE and .Net Framework, I would recommend that you create a application-level or document-level Add-In for word. Because it's easy to access the AD with managed code, and it's suitable in your case. You can check the
MSDN document here for the related objects you need to use in .Net Framework to access AD:
https://msdn.microsoft.com/en-us/library/gg145037(v=vs.110).aspx
But if you just want to use VBA for Word, this kb article tells you how to do this via ADO connection:
https://support.microsoft.com/kb/187529/en-us?wa=wsignin1.0
If you want to know something about Active Directory itself, then it's not the correct forum, you can open up new thread in the AD forums for help.
Thanks for your understanding.
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

10.5.3 and Active Directory Binding

Hi gang!
Ever since I updated to 10.5.3, I am having all sorts of issues with AD binding to our domain now.
I'll try to keep it short...
It started with a Kerberos prompt from Entourage 2008. I was prompted with an update Kerberos window to enter my password. Entered my password but got an error that my password was invalid.
Navigated and opened the kerberos.app and noticed no ticket. Tried to create a new ticket. I was prompted with my account does not exist.
Opened directory utility and saw that my AD domain was red and my server was not responding.
Tried to unbind, got an error that the account and every other account I tried was invalid, again. Could not unbind even after restarting a few times.
So I decided to reset everything by deleting the DirectoryService directory from Library/Preferences and restarted.
Re-entered all my company information to now get an INVALID ERROR!
I cannot bind now no matter what information I enter.
And if it does pass all the steps and bind, the forest information and domain administration is not entered or received. Red dot server not responding.
I even reinstalled 10.5.3.
Still cannot bind.
Anyone know what gives?

Ok here is what I did to fix our AD/OD issues.
Login in as root.
Unbind both AD/OD and delete them.
On the Mac Server remove all three entries pertaining to machine in OD.
machine$, machine.local, LKDC......
from a terminal you can type with no quotes "dscl . -read /Users/Admin AuthenticationAuthority" to get the Hash value.
On AD delete the machine record for the computer your trying to bind (if it exists)
Delete contents of /Library/Preferences/DirectoryService (not the folder!)
Delete system keychain /Library/Keychain/System.keychain
Empty Trash
Open up Terminal Go > Utilities > Terminal
type with no quotes: "sudo rm -fr /var/db/krb5kdc"
Then type with no quotes: "sudo /usr/libexec/configureLocalKDC"
this will recreate the Hash value for the machine.
Reboot (Important)
Login as root.
Open directory Services.
Bind to OD, then to AD.
Under services make sure your "/Active Directory/All Domains" is higher than your OD record if you want authentication from AD.
Open up your Date & Time preferences and sync clock with your AD server.
Reboot.
Login. (It did take awhile before I could login, about 5-15 minutes)
I hope this helps.

Open directory and Active directory

Similar Messages

Maybe you are looking for