Open doc webi screen bobjlogger

Hi All, I have made a WebI report and displaying it as a open document in the portal. The open document link was working fine until last week but now it has started displaying bobjLogger screen shot when the open document link opens.
when you click on this bojlogger screen it opens up a screen like this.
We are currently on SAP BOBJ 4.0 SP4 .
has anyone experienced this problem before?
Is there a way to remove the bobjLogger screenshot?
Thanks,
Shweta

I found this note. It might be helpful. Currently working on it
1731018 - Clicking on an open document link based on any Crystal Report from BI Launchpad a program called 'BOBJ Logger' pops up.
Regards,
Shweta

Similar Messages

Open Doc URL with parameter in BI 4.0 to open Webi and Crystal report

Hi Experts ,
Has any one experienced the open doc URL to open the report and to pass the parameter to the new report .
I am well aware of the syntax of passing the parameter and use to work perfectly fine with XI 3.1 but its giving me griefs in BI 4.0 environment .
In the new report i am just trying to pass the Fiscal year as a parameter with the url i can open the report but it does not accept the value being passed with the url so i have to renter the values again .
I am using BO 4.0 SP2 Patch 6 and trying to intact with crystal and webi report built on top of BEx query with the fiscal year parameter defined in BEx query level .
Any comment on this will be appreciated.
Thanks,
Vibhav

Hi Nakul,
I am not using the user response to get the value i tested it in Crystal Enterprise environment i tired passing the following syntax
http://.../OpenDocument/opendoc/openDocument.jsp?sIDType=CUID&iDocID=...&lsSFiscal%Year%(Single%Value%Entry,%Required)={?0P_FYEAR}
{?0P_FYEAR} this is a variable comming form BEx query into Crystal i tired to use it and pass it to other report but i cannot pass it i have tried to pass the hardcoded value still i see the paramater screen and have to enter the value again.
I am not sure if anyone has tested this functionality in BI 4.0 environment .
Thanks,
Vibhav

Open Doc Function to pass parameters from Xcelsius to WEBI

Hi All,
I need to have a drill through functionality from xcelsius report to WebI report I am using the following open doc URL
http://BO ServerName/OpenDocument/opendoc/openDocument.jsp?
sType=wid&sRefresh=Y&sIDType=CUID&iDocID="Doc ID"&mode=full&lsSRegion=""&lsSDay=""&lsSPlant=""&lsSProduct%20Name=""
When I run the flash in Internet Explorer then the drill through webi report opens without any error for the 1st time
but when I try to reopen the report again with new set of parameters , the browser gets hanged
Also when I run the flash in Firefox , I get error while opening the Webi Report for the 1st time but when I try to open the report again it works fine.
Please let me know if anyone has faced similar issue before.
I am Using Xcelsius 2008 SP3 and BO XI 3.1
Thanks,
Shweta

Hi Shweta
If you place the URL un the browser directly does the report open and refresh ok? Can you try altering the parameters of the URL, also directly in the browser?
Something else to check would be if the prompts in the WebI report can be optional, store the last value etc, and I wouldn't recommend having a prompt which has a space in the name such as you have (Product%20Name). Keep the prompts as simple as possible, and make sure that the 'equal to' and 'in list' operators are properly reflected in the URL.
Regards
Charles

Pass prompt value by open doc to Web intelligence Report in BI Mobile

Hi Experts,
I need to convert this open doc formule for BI Mobile :
Open Doc for Launchpad ==> it's Ok in production
="<a href=\"http://BI4SERVER:8080/BOE/OpenDocument/opendoc/openDocument.jsp?iDocID=AV5V9Gajm8pEthc0fowTIP8&sIDType=CUID&sType=wid&sRefresh=Y&lsSZSJOBID=Lien%20Mission&lsIZSJOBID="+EncodageURL(""+[Query 1].[Job Retain id].[Job Retain id - Key])+"\" title=\"\" target=\"_blank\" nav=\"doc\">Lien Mission</a>"
Open Doc for BI Mobile ==> it's ok wthout passing value
<a href="sapbi://OpenDoc/?authType=secSAPR3&default=yes&connection_name=pwc&server_url=fremesap820.cmis.corp.fr.ema.pwcinternal.com:8080&ConnectionType=BOEConnection&cms=BI4SERVER:6400&type=webi&iDocID=AV5V9Gajm8pEthc0fowTIP8&reportPageNumber=0" title="" target="_blank" nav="web">BIMOBILE</a>
I have a problem with passing value in prompt ??
How can write the red expression for web mode to work for BI MOBILE ??
Thanks & best regards
ELYAE BI

Any help please or idea or Note SAP ?
I have a problem with passing value in prompt with webintelligence document using BEX Query ?
Thanks and best regards
ELYAEBI

Passing hierachy node variable from BW to BO Webi Report in open doc link

Hello All,
We are working on BW-BO integration and creating Webi reports based on Bex queries.
The question is regarding passing of a hierachy node value from BW to BO through open doc link.
I see that when we pass hierarchy node value, we have to associate that with the corresponding infoobject technical name in the link but not sure in what format it has to be sent.
For example, if ARM is the node value and 0HIERNODE is the infoobject , how should we send this value to BO.
Please help.
Thanks for your help,
Regards,
Tangudu S

You cannot change anything here. You should really find out how the values are retrieved from the database
THere is another option:
1) Activate the tracing on your BOBJ server
Check the following SAP notes (http://service.sap.com/notes) for that:
Unix: Note 1235111
Windows: Note 1260004
2) Run your WebI report from the InfoView by choosing first the desired hierachy node value from the LOV of your prompt.
3) Extract the MDX statement from the log file. It should contain the value for the hierarchy node. Copy this to the URL
It is easier to find this out if you have access to a Crystal Reports Designer installation. Do you?
Regards,
Stratos

When i try to open a web page, a blue screen appears and it is telling me " safari cannot open the page because i am not connected to the internet. i have an iphone, no problem and a laptop with connection - no problem - not sure what the trouble is.

when i try to open a web page, a blue screen appears - message says - sarfari cannot open the page because it is not connected to the internet. i have an iphone - no proble and a laptop - no problem as well.
what is wrong?

There are other things that need attention:
Your above posted system details show outdated plugin(s) with known security and stability risks that you should update.
*Shockwave Flash 10.0 r32
Update the [[Managing the Flash plugin|Flash]] plugin to the latest version.
*http://www.adobe.com/software/flash/about/

I try to open docs off the web (ie: floorplans) and I get error message stating I need to accept End User Lic Agreement.How can I resolve this?

I try to open docs off the web (ie: floorplans) and I get error message stating I need to accept End User Lic Agreement.How can I resolve this?

/Applications/Adobe Acrobat XI Pro/Adobe Acrobat Pro.app
*Note, the ".app" file extension for the application is usually hidden from users view.

Hi, I have this green mark (with pointing arrow looks like a link) on some words show on my window screen when I open a web page, I wonder if it is a virus link or such. Need help how to get rid of it. Thanks

Hi, I have this green mark (with pointing arrow looks like a link) on some words show on my window screen when I open a web page, I wonder if it is a virus link or such. Need help how to get rid of it. Here's the example:
WING
GAMES
MAJORITY
Thanks

If the third link you posted (the link containing the word "majority") does not look like the following then you inadvertently installed adware.
That particular page should resemble the following:
The word "majority" in the third paragraph should not be a link and should not have the green icon associated with it.
To learn how this may have occurred, and how to prevent it from occurring in the future, read How to install adware
Most so-called "news" websites are nothing more than entertainment outlets that cater to prurient interests, and contain advertisements that leave the user about three clicks away from installing junk. If you decide to frequent those websites, Safari's "Reader" feature helps minimize that exposure.
Try it:

BO4 - The action cannot be performed WIS 30650 when try open some WEBI docs

Get message BO4 - The action cannot be performed WIS 30650 when try open some WEBI docs.
Documents created brand new in BI 4.0 .
Some docs open fine.
Get message even when log in as Administrator.
Windows 2008 Server Oracle 11.2.0.1
Any idea what causes this.
Many Thanks

Hi,
Thanks for reponse.
Distributed environment 1 server hosts web application server (Tomcat), 1 server hosts BOE components.
Contacted BO support and we did right click on document/modify and get error message you referred to.
However - also get this message when try right click modify existing web intelligence sample reports or even try open which ship with the product and have never been modified.
Checked that file referred to exist in Input frs and does.
Logged in as Administrator so not permission-realted.
Thi seems like a huge bug to me that can't vene open the webi sample reports which ship with the product.
servers look fine - I'm only one using and can create ans save reports fine just openiong or modifying some later or some of the sample ones.
Our FRS is on networked location and uses UNC path - I'm assuming this has no impcat.
Many Thanks

Using the Motorola Atrix w/ the laptop dock, when I open a web page with Firefox I have to hit "Ctl +" three times to make the page fill the screen. Is there any way to set up so pages open the right size?

I'm using the Motorola Atrix smart phone with the Laptop Dock. When I open a web page with Firefox I have to hit "Ctl +" three times to make the page fill the screen. Is there any way to set up the Firefox browser to open the web pages the right size in the first place?

The Firefox Page Zoom feature does a domain by domain level of saving the users preferred zoom level settings, there is no default Page Zoom level setting in Firefox.
Try the Default FullZoom Level extension: <br />
https://addons.mozilla.org/en-US/firefox/addon/6965
Or the NoSquint extension: <br />
https://addons.mozilla.org/en-US/firefox/addon/2592/

How can I stop ID from opening docs in full screen

How can I stop ID from opening docs in full screen in ID 5.5?

You didn't answer the OS question, but I'm going to presume it's some version of OS X. This has been, I think, a common complaint among Mac users, but as a PC person I don't remember what exactly can be done about it, if anything. On thing you might want to try is using the Application Frame.

I have a Mac Air, I opened a web page and it died within a nano second, then I got the beachball for about 40 mins so I turned it off. Now I cant start it up again, I get the chime, the apple a grey screen then I get the pinwheel, it's still going, help

I have a Mac Air, and I opened a web page in Safari and it died before the page could load, then I got the spinning beach ball for about 40 minutes so I turned it off. Now When I turn it on I get the chime, a grey screen, then the apple, then the pin wheel -its been going now for an hour.
Any help greatly appreciated

There are several ways to back up a Mac that is unable to fully boot. You need an external hard drive to hold the backup data.
1. Boot into Recovery (command-R at startup; 10.7 or later), from a local Time Machine backup volume (option key at startup; 10.7.2 or later), or from your installation disc (C key at startup; 10.6.8 or earlier.) Launch Disk Utility and follow the instructions in the support article linked below, under “Instructions for backing up to an external hard disk via Disk Utility.”
How to back up and restore your files
2. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, boot the non-working Mac in target disk mode by holding down the key combination command-T at the startup chime. Connect the two Macs with a FireWire or Thunderbolt cable. The internal drive of the machine running in target mode will mount as an external drive on the other machine. Copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
How to use and troubleshoot FireWire target disk mode
3. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.

How to open new window webi report using open doc?

Hi All,
i have created URL using open doc in Bi 4.0 .please find the below my code.
http://fcvws975/BOE/OpenDocument/opendoc/openDocument.jsp?iDocID=AeX5DoctKBhGv1AiV2oibxU&sIDType=CUID&sType=BI
workspace&sRefresh=Y" title="" target="_blank" nav="doc"></a>
When i click on this hyper link it is opening in the same page not in new window but i want to see report in new separate window.
Can any one please help .
Thank you,
Regards,
Venkat

Hi,
In BI4.1 SP03, there are couple openDocument fixes related to workspace.
ADAPT01700442
Description:
When using an Opendocument URL to open a BI workspace, a timeout error occurs resulting in an HTTP 500 error
message that reads: "Your session has expired".
New Behavior:
This problem is resolved.
ADAPT01711393
Description:
In Internet Explorer 8, if you attempt to view an Analysis workspace embedded in the SAP NetWeaver Portal using
OpenDocument, the workspace will fail to load.
New Behavior:
This problem is resolved.
What version of BI4.0 do you have?
If the fixes above are related to your openDocument workspace issue, I'd suggest you to test it on a BI4.1 SP03 sandbox.
Hope this helps,
Jin-Chong

One parameter in open-doc url in webi not required

Hi,
I am using SAP BO4.0.I have made one open doc URL which links one report to another.While linking there is one extra parameter which have been added, means the linking in the first report is done for a prompt that is not present in the second report.Still, the linking works properly with the correct parameters being passed and I can navigate from one report to another.So I have come to a conclusion that if the prompt is not present in the second report that prompt is ignored in the first report(on which linking to the second report is present). Has anyone come across such a situation.
I hope I have made myself clear.

Hi Riddhi ,
That is purely depend on requirement.If you want to pass any parameter from master to sub report , then put prompt on Sub report and pass the value from Master.You can ignore the prompts.
In 4.0 we have option to leave the prompts to "default" in links.

I can not play angry birds chrome after open the web only see a white screen

i open firefox web page and play the angry birds chrome recently but cna not play at all there is big white portion at center no picture turn up pls advice thank you.

Hi,
If you haven't already, try restoring the iPod and setting it up as a new device. This article: http://support.apple.com/kb/HT3828 provides more details about setting the iPod touch up as a new device.
Remember:
If you choose to set up as a new iPhone or iPod, first back up any important backups of that device you want to retain from the backup folders listed above. iTunes only retains one sync-generated backup per device, and the first sync after setting up as new will replace your previous backup. If you change your mind and want to restore to your previous state, you will have to do so from a backup that you have retained through your periodic backup routine. If you have Mac OS 10.5.5 or later and use Time Machine, Time Machine may back up your backup. Copies of a backup marked with a date and time stamp created by selecting to "Restore from the back up of" are retained by iTunes and not overwritten. For an example of a backup with the date and time stamp in the device name, see the picture below in the Deleting a Backup section.
from http://support.apple.com/kb/HT1766
-Jason

Open doc webi screen bobjlogger

Similar Messages

Maybe you are looking for