"Open document with" has started to appear

GroupWise 7 client and server - we do not integrate our documents with the
appropriate applications when installing GroupWise clients.
Until recently when double clicking on a document in the library - either
by browsing the library directly or using Find - GroupWise fired up the
appropriate application (usually MS word from Office 2003) then loaded the
document, returning it to the library when you had finished editing.
We are now being asked to select the application to be used to open the
document, even though the icon for the file type in the library shows the
correct application.
This has started recently for me and other users. As far as I know we have
made no changes. Is there any way to force GroupWise to use the appropriate
application without prompting the user.
This problem does not occur if I use Windows Explorer to browse documents
on the local machine or on the network - so Windows knows the correct
application to use to open the .doc files.
Thanks
Ian

More information:
It's a particular problem with GroupWise. When I double click on an
attachement to an e-mail, where the default action is to open, I'm also
presented with a list of programs to use to open the document. Even when I
say "Always use the selected program to open this kind of file" the setting
does not stick.
Yet double clicking on a .doc file in Windows Explorer always loads word
and opens the doc without asking me which program to use. So my PC knows
about the correct file associations - it's GroupWise that forgets
Thanks
Ian
> Ian,
>
> If you look at the document properties, the version tab, is the file =
> extension correct?
>
> Tony
>
>
> >>> <[email protected]> 6/5/2006 9:48 PM >>>
> GroupWise 7 client and server - we do not integrate our documents with the
> appropriate applications when installing GroupWise clients.
>
> Until recently when double clicking on a document in the library - either
> by browsing the library directly or using Find - GroupWise fired up the
> appropriate application (usually MS word from Office 2003) then loaded the
> document, returning it to the library when you had finished editing.=20
>
> We are now being asked to select the application to be used to open the
> document, even though the icon for the file type in the library shows the
> correct application.
>
> This has started recently for me and other users. As far as I know we have
> made no changes. Is there any way to force GroupWise to use the appropriate=
>
> application without prompting the user.=20
>
> This problem does not occur if I use Windows Explorer to browse documents
> on the local machine or on the network - so Windows knows the correct
> application to use to open the .doc files.
>
> Thanks
>
> Ian
>

Similar Messages

Erm...An exclamation mark '!' has started to appear on my AE screen - Why?

Erm...An exclamation mark '!' has started to appear on my AE screen - Why?
It doesn't seem to be affecting anything and I can't seem to find anyone else on the web who has the same issues, the only thing I'm hazarding a guess at is that it is something to do with Open GL, as its in the same colour/font + drop shadow as the open GL font is. Beyond that I'm stumped.
Anyone any ideas?

There's a weird glitch that causes some script panels to appear at the minimum size (which looks an awful lot like an exclamation point).
Scripts like BG Renderer need to be installed in the ScriptUI Panels folder and run from the Window menu as described here: http://aescripts.com/faq/how-to-install-and-run-scripts/
Once it's installed and run this way, you should avoid the issue you are experiencing.

Open Documents with Office Web App - SharePoint 2013

We have configured Office Web App for our SharePoint 2013 Farm and in Site settings, Site Collection Features, have disabled "Open Documents in Client Applications by Default" . Out of 15 sites, all documents in 13 sites open in Office
Web App. One of the 2 sites where the document still open using Client Application is a Wiki site.
Advanced propertied for the libraries settings has been set to "Use the server default (Open in the browser)". Anything else to check to open documents in Office Web App?
Thanks
MP

Hi,
As I understand, you encountered the issue when you want to open documents with Office Web App.
Check things below:
1. In the library setting->advanced setting, you can choose the open in the browser to see if the same situation will occur.
2. Check if you have not enable the Open Documents in Client Applications by Default feature.
If you choose Activate to enable the Open in Client feature (documents will open in the client application), or
Deactivate to disable the Open in Client feature (documents will open in the browser).
You can go to Site setting->site collection administration->site collection feature->Open
Documents in Client Applications by Default to set the feature.
The article below is about how to set the default open behavior for browser-enabled documents.
https://technet.microsoft.com/en-us/library/ee837425(v=office.15).aspx
The article below is about how to configure office web apps for SharePoint 2013.
Configure Office Web Apps for SharePoint 2013
Best regards
Sara Fan
TechNet Community Support

Photoshop crashes when I open documents with a diferent ICC profile

i just installed an epson Plotter and since every time I try to open documents with different ICC profile after photoshop ask's me to change the color configuration it crashes. I really need help with this issue.

I solved the problem by creating a spare user account. thanks for the help. now the issue is that I can't find, the corrupt file or what ever is making the original problem happen which is still happening in the main user account. my guess is that the corrupt file comes from the printer.
everything started to happen after I installed the printer which is an EPSON Pro 7600.
any Ideas how could I find the problematic file.
and if any of you have any Tips how to install the printer with out having problems I will really appreciate it.
thanks everyone for the help. everything was clear enough to get to know how mac works.

Opening documents with custom layer structure, especially default layer unlocked...

Hi, is it possible to open documents such as jpg screenshots which are apparently a locked layer by default, as instead an unlocked layer?
Would it even be possible/easy to have a method of opening such documents with the following layers:
1 original image (unlocked)
2 blank transparent layer
3 white locked background
4 group folder called 'archive' with a copy of the original image, with the group set to invisible
Could a droplet be made to open documents with such a "precreated" layer set-up?
For example, I would like to take a screenshot or scan, drag it onto a droplet, and have it open with the layer structure outlined above.
Thank you thank you thank you...

"The image is NOT locked."
Shesh whatever you call it the image the background the initial layer "the so called layer" I would just like to change its default opening to UNLOCKED so at minimum, as I have said four times now, it can be placed in a folder called "Archive" without having to f'ing unlock it...scripting additional opening actions in addition to that at this point must be beyond your imagination
"Have you tried working on the so called locked layer?"
HAVE YOU READ THE ORIGINAL QUESTION????
Working on the background layer is not my primary concern, organizing layers automatically at the start of a workflow is...but nevertheless...erasing part of the background in order to reveal imported images or drawings created beneath it on new layers requires the background be unlocked (so erased sections are transparent rather than black), changing layer order requires unlocking, moving the background on a resized canvas requires unlocking....and of course placing it within a folder requires unlocking -- what the hell is the advantage of it being default locked?? why isn't this optional?
I can't imagine people working on complex images with multiple folders and forty plus layers in various folders and such -- nevertheless consistently want to leave the background layer just sitting there hanging out in its default locked state. I'm ALWAYS unlocking the damn layer...if only, for the FIFTH TIME, for organizational purposes (to change its layer order and place it within a folder).
SHESH!
"Methinks..." Oh please...next time read the question.

Error when opening document with ECL control: INVALID_DATA

Hi Gurus,
I've tried to search the net for this problem but could not find anything and I'm stuck now.
Description:
we're using ECL to view attached documents (to POs etc.) which are stored through ArchiveLink on the content repository.
when we try to open this document, time-to-time we get following error:
Error when opening document with ECL control: INVALID_DATA
Message no. SDV004
by time-to-time I mean that when we try to open same attachment again it opens successfully (sometimes we need to re-open it 3-4 times to get it)
what we've tried is to enlarge timeout for HTTP protocol (tx SMICM, from former 30 to actual 60) but only effect we got is that we're waiting for the error longer time
It will be really great if anybody of you guys can give me an advice where the problem can be or where should I look and what to check
Thanks,
David

Hi Christoph,
thanks for tip, unfortunately this was already flagged, currently settings are:
for Display Settings:
yes - include ECL control
use HTML control
empty - maximum viewer wait time
(do you think that setting some value for this could help)
yes - deactivate generic object services in viewer
no - doc display as dialog box
yes - deactivate data provider cache
Storage Settings:
yes - always copy document class from document type
yes - permit multiple assignment
Thanks,
David

Automatically open document with Pages 5

When I upgraded from Pages 4.3 to 5x, documents were automatically set by the installation to all open with version 5.0.x . Due to some initial problems with Pages 5, I changed the setting so that Pages 4.3 opened all documents. I did that by command-i, get info, open with Pages 4.3, and change all.
Now I want to default back to opening with pages 5.0.1, but if I do the same procedure (command-i, get info, open with Pages 5, and change all), Pages is still opening documents with version 4.3.

All Pages files no matter what version and incompatibility have the same extension .pages.
That makes it impossible to get the System to stick with a choice in Finder.
Trash/archive whichever one you don't want.
Peter

SAP DMS : Error when opening document with ECL control: INVALID_DATA

We are receiving following error while try to view .FAX file through SAP Document viewer
"2D viewer - Unable to opend Document"
"Error when opening document with ECL control: INVALID_DATA"
Appreciate your quick effort.
Thanks,
Sam.

Yes, We have checked in both ways, I have also followed other threads on the same issue
But not able to find the solution for the issue. We are facing the issue when we are using files scannned by Kodak Scanner i1420 in tiff format.
But If I will attach any other tiff files from directory then It can viewed through SAP Document Viewer.
I appreaciate your help in this regards.
Thanks,
Sam,

Problem Saving or Opening Documents with Office 2013 Home & Business

Hello there,
as the title says, I'm running into a problem when trying to save or open Documents in Word,Excel,etc. (all Office Programs)
I get the message "Microsoft Word stopped working". Or Excel, Powerpoint...
I already tried to deinstall and used the Office-FixIt-Tool to clean the PC.
I also updated the driver for my Graphic-Card, installed the newest Windows-Updates and checked if it is caused by an Add-In.
None of this helped. The Problem still exists when starting in Safe-Mode.
In Event-Viewer I get this Message:
Name der fehlerhaften Anwendung: WINWORD.EXE, Version: 15.0.4673.1000, Zeitstempel: 0x54588338
Name des fehlerhaften Moduls: unknown, Version: 0.0.0.0, Zeitstempel: 0x00000000
Ausnahmecode: 0xc0000005
Fehleroffset: 0x00000000
ID des fehlerhaften Prozesses: 0x588
Startzeit der fehlerhaften Anwendung: 0x01d024187bb58e06
Pfad der fehlerhaften Anwendung: C:\Program Files\Microsoft Office 15\root\office15\WINWORD.EXE
Pfad des fehlerhaften Moduls: unknown
Berichtskennung: bf49a2b4-900b-11e4-bbbd-4437e6c80968
or this one:
Name der fehlerhaften Anwendung: FIRSTRUN.EXE, Version: 15.0.4665.1000, Zeitstempel: 0x54339094
Name des fehlerhaften Moduls: unknown, Version: 0.0.0.0, Zeitstempel: 0x00000000
Ausnahmecode: 0xc0000005
Fehleroffset: 0x00000000
ID des fehlerhaften Prozesses: 0x15f4
Startzeit der fehlerhaften Anwendung: 0x01d0241b0af94938
Pfad der fehlerhaften Anwendung: C:\Program Files\Microsoft Office 15\Root\Office15\FIRSTRUN.EXE
Pfad des fehlerhaften Moduls: unknown
Berichtskennung: 48c2649c-900e-11e4-bbbd-4437e6c80968
If I start Windows in Safe-Mode and try to start one of the Office-Products I get another error, something like:
Your Program could not be started. Please try again.
OS: Windows7 64Bit
Hope there is a fix for this...
Thanks in advance!
marcus

Hello George,
No, it has never worked.
For testing I installed Office 2010 and this worked fine.
But as I said, all versions had been deinstalled before reinstalling Office 2013 (even cleaned up with the FixIt-Tool).
Best Regards
marcus

Unable to open documents with policies

We are using a test version of the policy server to evaluate the features of the product.
We had some trouble to install the server and to use it with Adobe Professional but now we can protect pdf files with policies. Most of the problems was solved with the help of articles in these forum :-)
Unfortunately we are not able to open the documents with the Adobe Reader :-( Only the computer on which the documents were protected is able to show the files. On all other computers we became the error message
b "Your computer has to be connected to network. Your right to open these document offline is expired."
In German: b "Dieser Computer muss mit dem Netzwerk verbunden sein, um dieses Dokument zu öffnen. Ihre Berechtigung, dieses Dokument offline zu öffnen, ist abgelaufen. Wenn dieser Computer nicht mit dem Netzwerk verbunden ist, stellen sie eine Verbindung her, und versuchen sie erneut, das Dokument zu öffnen."
The policy server is reachable with browser and ssl works.
Reader versions: 7.0.0, 7.0.5, 7.0.8
Regards

It's been my experience that when you get the "Not Connected to Network" message, it simply means that the client PC doesn't have the certificate of authentication installed.
I suggest that you check to see if the certificate is installed on the PC that's connecting. (In IE, you would click on Tools-Internet Options-Content-Certificates.) Then check a computer that's not connected. If there is no certificate installed, it won't connect. To install a certificate, you must click "View Certificate" immediately after a hitting the page and getting the security dialog warning, then click "Install Certificate."
Hope this helps.

Save/open document with different font with RTFEditor!

Hello everyone !
I am creating a RTF Editor with JTextPane, DefaultStyledDocument and RTFEditor,It is right if input English character with different Font such as Arial,Basemic etc .but with Non-English ,It is question!!when I input chinese in font "��GB_2312",and save it ,then I open it again ,font is changed to "��"��but font size,color ,and style is correct!I doubt it is RTFEditor does't support chinese font ,is it?how can I do?
thanks a lot!

That's because nobody has posted an answer. You can find the discussion at how do I save a document with different page orientations to one pdf? I think this is pretty much what happens on Mac, but you can combine the separate PDFs to one.

Proplem with opening documents with Reader 9.1

Hello Together.
I hope someone can help me.
I have a interesting problem. When i want open a PDF Document with a doubleclick, then the Reader hangs most time. This will happen on different documents. If i open this document over Acrobat Reader menu, the document will open correctly.
The next crazy point is, if i want rename the folder which contains the pdf files, the explorer will hang also.
Our configuration.
Windows Vista SP1 and SP2
Profile Path local
Adobe Reader 9.1.2
Domain Logon.
What i have tested:
- Same installation with a local user account. = Works.
- Reinstall = problem exists
I have found a small thing. If i delete the UserCache.bin file int the APPDATA, then it works until the files is recreated.
Other PDF reader from other companies works without any problem.
I hope somebody can give me some hints or a solution for this problem.
Greets
Mike

I am experiencing a similar problem as well with Reader 9.1.
I am unable to open a PDF file by double clicking. The file is displayed with a PDF/Adobe icon so the file is associated with Adobe Reader. However when you double click a dialogue box appears saying that it was unable to open the file as Adobe Acrobat Reader needs to be installed first, which it is. I have tried un-installing, then re-installing but still it happens.
If I open Adobe Reader and then drag the file in to the Adobe Reader window it will open the document OK.
Any ideas why this is happening?
thanks

Reverse a billing document with has subsequent documents

Dear Gurus,
I have following stage:
Billing document 5400002, this document has a payment related.
Now i need to cancel the billing document so i use trx VF11 with document 5400002 but the system does not validate that document 5400002 has a payment or a document related.
i am using SD with FICA integrated, does anybody know any note in order to solve this trouble?
Thanks for your help!
Best regards!
Juan

Dear Mandar Deshpande ,
I have SD integrated with FI-CA, and the problem is that there is no error message when canceling a billing document with trx VF11 and the billing document has been paid in FI-CA. I would have expected to get an error message in such scenario, similar to the one you get when you try to cancel a cleared document with trx FB08.
Please let me know if im not clear.
Best regards.
Juan

Can't open documents with adobe

Even though I have adobe installed on my Android device, when I go to open a document, adobe doesn't come up as one of the applications to open it with. Help!

Hi,
Could you let us know the mode of opening the pdf, web browser, email attachment or a local file browser?
What is the version of Adobe Reader installed on your device?
Thanks for reporting the issue.
Regards,
Rishi

Picture mis-aligned when i open document with Pages

Hello all,
I am new to Pages and previously did lot of work on MS Words.
When I start using Pages to open on my previous MS Words documents, the picture are mis-aligned. I tried playing around with the 'stay on page' or 'move with text', and all the other buttons i can click on under the 'Arrange' columb, it just don't go back to the original alignment. Previous in MS Word, I did a right click on the picture, change the picture format layout to 'in front of text' and it will work.
Pages mis-aligned all my work and my boxes and charts from MS word document.
is there any way i can solve this issue?

We assume you are using Pages 5, the latest Pages but haven't said so.
Pages is not Word and not 100% compatible with its files, particularly Pages 5 which has had over 90 features removed from the previous version.
You should be aware that the .pages file format is a proprietary Apple format, used by very few users, unopenable by any other application and just changed to another incompatible format without notice by Apple just last month.
Pages 5 has trouble opening its predecessor's files, let alone Word's
Peter

"Open document with" has started to appear

Similar Messages

Maybe you are looking for