Open Enrollment - No entry for form type B2

Hello,
I havea problem in open enrollment, when we save after the review, error -No entry for form type B2 is occured.
I haveperformed all the necassary steps as below.
1) Created new package and copy HR_BEN_ENRO and HR_BEN_CONF from 000 to current client as Z forms
2) Activated the form.
3) Assigned the above modified the templates in SPRO.
I even see the new entries in table T74Hl
Let me know what is wrong
John

Nice work, Tim. I hit that problem before long ago, but did not get change to reply....heck, I would have to dig through my notes to even find the fix again! haha Thanks for posting it up and helping out.
edit: hahaha Found an old post I did in the HR forum for this a good while back. =)
What is Form type B2

Similar Messages

  • RPUCOB02, No Entry for form type C9

    Hi All
    Recently we applied the HRSP 43 for ECC 6.0. When we run the program for generating the COBRA letter for the first time after the HRSP's, we are having an issue. When we select an employee qualifying event and click print spool we get an error saying 'No enter for form type C9'. It was working fine until that week and this issue started after applying the support packs. Since this is a stanard SAP code, I opened a message to SAP and hope they will provide me with a note but thought I will check with you for any additional inputs. This is impacting around 50 employees as we need to send them the COBRA letters and charge for COBRA premium rates.
    Regards

    Hi Raj, This is the response from SAP
    Note 1327797 has been done to correct several issues with the new
    Cobra functionality so you should defenetly implement it.
    Now regarding the error message, could you check if the information
    below would help solving this issue:
    'If you are not able to see the forms in view V_T74HL, please check
    in your system and maintain the forms in language 'DE' as they are only
    visible in this language. After maintaining the forms in language 'DE',
    however when viewing the same in language 'EN',you will not be able to
    see the description in the view. Instead you will see the entry as 'C9'
    and 'CA'.
    So as per SAP's suggestion, we created a dummy form and assigned that to C5 thru CA values
    in the view V_T74HL. This resolved our issue.
    Good Luck

  • Report RFDUZI00 claims about entry for movement type CREIR

    Hello,
    we have moved from R/3 4.6 to ECC 6.0. Now we have some errors coming up in FI module.
    One is this:
    Report RFDUZI00 (debitor interest calc. run) ends with a comment before posting:
    "For movement type CREIR and interest attribute 01 the table of time dependent interest conditions is not maintained" (message translated from german).
    We had to add this entry in transaction OB81 to get rid of this issue.
    In 4.6 we didin´t need this entry to run the report successful.
    We have checked and did not find any comments in release notes.
    Question: Can anybody confirm to this new requirement of the system, which looks like RFDUZI00 or dependent include etc. was enhanced to check entries for creditors (for which reason?).
    Possibly we found the answer in OSS 670117, which explains changes in RFDUZI00 relevant since R/3 4.7.
    Regards
    Dirk
    Message was edited by:
            Dirk Meinhard

    Solved on my own!

  • Howto post offsetting entries for Record type Z Line items in KE24 from FI

    HI,
    We are facing one problem for order created from CRM.
    Firstly this order  has created  with one profit center ( ex PH50293 ) they have posted some plan values and released the order in CRM so values flown to ECC and available in KE24 .
    After some time , we have changed profit center for this order in CRM by changing  service organisation and release the order after that we have posted some values in that order which is not flown to ECC becuase of different profit center
    Later we rejected the all values and make balance zero in CRM , But still values are appearing in KE24 and there is inconsistency of profit center between ECC & CRM.
    Now want to make the balances zero in KE24 for that order. but it shows record type Z ,
    So , now how we can rectify this and how we can make balances zero
    __Note :  as per present setting in the system, we can not change the profit center in CRM once order released_._
    Thanks & Regards
    Gupta

    Dear VK,
    I guess, the only option would be to post manual correction thru KE21N, with negative values for record type Z.
    Trust this helps.
    Cheers.

  • Profit center an optional entry for Movement Type

    Hi All,
    I have the need to make changes on the Field Status for the Movement Type 561 to set profit center to be an optional entry.
    Right now when I go to MB1C and enter the movement type and the plant, it asks for a profit center since its a req entry. I want to change that to optional. Please help.
    Thanks
    RFico

    Hi
    1. Go to SE38 - Program RM07CUFA
    2. Enter Movement Type 561 - GL Account as your stock account
    3. Execute
    4. It will show you 2 columns - Field Status as per MM and FI
    5. Make Profit center as optional there for MM...
    6. Pr Ctr as optional for FI can be made from OBC4
    Regards
    Ajay M

  • Multiple entries for aleave type in quota overview in ESS

    Hi all,
                I am getting multiple records for some leave types in quota overview application in ESS.I mean when i open the quota overview app there are 2 records for emergency leave and 2 records for vacation leave with different values.
    No HR person is aavailabale here.Can anybody help me please.
    Thanx and Regards,
    Rajesh

    Can you tell the forum how the issue got resolved?

  • Vertical Panel per page Problem for Form-type Reports

    I have a notification form-like report consists of 5 pages so I set the vertical panel to 5 (so when it prints, there are actually 5 physical pages, but 1 logical page in the reports builder). Some fields will expand, their datatype is BLOB. And when they expand, there are now 10 physical pages (even if the expansion is caused by a half-page-long data) some with blank pages. What I expect to happen is that there are 5 physical pages (as originally set) and additional pages (let's say another 1 page) for the expansion. But is this possible, that we can limit the number of vertical panels for the expansion? Can anyone help me please...?

    Has anybody experienced the same problem? Thanks in advance!

  • Accounting Entry for Movment Type 453

    Hi,
    I am taking the Material back to unrestricted stock from retuns stock using mov type 453.
    The followling acconting entry is being passed while doing the transaction:
    Import TradeableGood  1,308.84-
    COGS-  Import TG 1,308.84
    Pls. advice whether this correct or not.
    Regards,

    Hi,
    Ideally speaking it should hit Inventory to inventory change account.
    Regards,
    S Anand

  • Product_User_Profile Entry for forms

    I want to restrict DML from different applications, Please tell me the entries of
    "PRODUCT" field for different applications .

    Hi
    We use one method for this. All users have only one default role and other roles have a password. There is wrapped procedure with 'secret values' of parameters. When user login in our application we call this procedure and it set all user roles as default.
    It is not very secure but it work. So think for this. If you want email me and I will send you example code for this procedure.
    Regards
    null

  • Entry for condition type missing in table PRCC_COND_CT

    Hi guys,
    I got this error message in my BDoc.
    It ask me to
    "Fill the table PRCC_COND_CT bu using a Customizing download, and then restart the rolled back block in the inbound queue."
    I am not too sure what is a customizing download.
    Can you guys help me out?
    Cheers
    Lawrence

    Hi,
    Firstly please apply the note 1003793 and then run the customizing load again and check for errors.
    then if you get any errors like
    "It is not possible to change client-independent Customizing objects Message no. CND_MAP204                                                  "
    Then log into SCC4 transaction and then make the following change
    "changes to repository and cross-client customizing allowed" under Cross-Client Object Changes.
    Thanks,
    Abishek

  • No entry found in table SMOFQFIND for BDoc type SI_CONTRACT

    Hi Gurus,
    I try to do a request dowload for SI_CONTRACT object.
    When  execute and monitor my request objects the status is OK.
    Then, I check the BDocs Message Trace and I see the following  error
    "No entry found in table SMOFQFIND for BDoc type SI_CONTRACT - Queue name used: CRI_SI_CONTRACT (see note 677800 for further info"
    Does anyone know how to resolve this issue?
    Thanks,
    M@le

    Hi Brian,
    There was leading 0 for the contract # in the request detail, however this message is still in the BDoc message trace. The BDoc was posted successfully. I checked the table SMOFQFIND and could not find the entry for BDoc type SI_CONTRACT.
    There are records for SI_CONNOBJ and SI_POD which are all delivered by SAP. I think we just need to maintain SI_CONTRACT in this table to get rid of this message. Just I do not know what exact to maintain for SI_CONTRACT.
    Could you help to check standard SAP environment to see what is the detail for SI_CONTRACT in table SMOFQFIND?
    Thanks,
    ZJKong

  • Missing default flag for communication type in crm/business partner

    Hello!
    We've connected a crm 5.0 with an R/3-system (4.6c).
    The crm-system is the leading system...
    While inserting a new customer in crm with phone- and fax-number.
    After "save" we've got red bdocs, telling us that the standard entry for communication type is missing.
    In crm 5.0 there's no standard flag for the phone number but a fixed range with from-date and to-date.
    The R/3-system needs the default flag (an "X") as a sign that the number is the standard number.
    Anywhere there should be the problem...
    Is here anybody with some advices for us?
    Thanks a lot in advance.
    Best regards,
    Ingo

    Dear Ingo,
    I assume you talk about error message XR002
    You have 3 options to resolve the issue:
    1. In order to avoid error message XR002 you must set the Standard
    Indicator Validity in the maintained telephone in BP transaction.
    You can find this indicator in the yellow arrow near the telephone
    number. Here you must press the button "Standard Indicator Validity".
    2. In customizing you have the possibility to switch off the time
    dependency of the addresses causing the XR002.
    3. The error occurs due to missing ADRU entries for the communication
    data (Email, Phone, Fax etc).
    The function modules used in data exchange assumes that there is
    an ADRU entry for all addresses. This assumption is partially correct.
    If an address is created in Basis release 6.40 and above, then for all
    communication data of that address ADRU entries will be created.
    But if a Business Partner(with address) is created in release 6.20 or
    below and system is upgraded to 7.0, ADRU entries for the communication
    data of thoses addresses are not automatically created. When the user
    opens that BP in change mode & modifies the communication data and
    saves it then ADRU entries for that BP's communication data are created.
    There exist a correction report and several notes, so I think if above info
    is not able to help, it would be better to open a support message!
    Regards,Gerhard

  • How do I restrict certain plans from appearing during Open Enrollment?

    We have 15 benefit plans for which all employees are eligible.  We do not want to change the groupings or settings for our Open Enrollment period but would like to restrict the plans that appear for Open Enrollment so that only 12 out of the 15 plans are displayed and available to employees in ESS.  Can this be done?  I know I can restrict which plans are available when using IT0378 Adjustment Reasons but cannot find a way to restrict the list for Open Enrollment.  Thanks for any suggestions.

    I had that exact same delima, but one of our consultants pointed us to the transaction: HRBEN00ADJRSN
    This is a mass load of adjustment reasons.  You just need to feed the program the total time allowed for adjustments and things like start of records date and end of records date.  Because of the dates and the potential for different plans to have different dates, we actually have two open enrollment adjustment reasons.  We have one for Flexible spending where I give the 1/1 begin date and a 12/31 end date since it is only effective for the year in question.  Then we have our main open enrollment for all other plans where the begin date is 1/1 of the new year and 12/31/9999 for the endda.  I then run the HRBEN00ADJRSN twice for the population:  once for the flex enrollment, and then again for the main open enrollment adjustment reason.
    DP

  • ALE with BAPI; No recipient found for message type

    We have to send sales activities from an ECC-system to CRM and tried to do this with message type SFADPSA and Idoc SFADPSA01.
    When adding this message type to the distribution model (transaction BD64) we got the SAP-message to use a BAPI instead:  IF1037SR with method RECEIVEPARTNERSALESACTIVITY. So we did.
    To trigger the Idoc, we customized an output type, with transmission medium ALE, program RSNASTED and processing ALE_PROCESSING.
    When processing the output type we get an error B1 129: "No recipient found for message type SFADPSA in the ALE model".
    Analysing the error I found out following: during processing (RSNASTED, ALE_PROCESSING) function module MMODEL_INT_VALID_GET is called. This FM only looks into table TBD05, in which no entry for message type SFADPSA is found.
    However, also function module BMODEL_INT_VALID_GET exist, searching table TBD06.
    This table does contain an entry for the above BAPI and method and would not lead to an error message.
    Obviously this last FM should be called, but this never happened...
    Has anyone a clue?
    Do we use the correct processing code?
    Another message type to use could be SFADSACTIVITY, but this message type has no Idoc type assigned.

    Hello Wolf,
    This error message come while determing the distribution channel.
    This error come from one of below includes. Can you please put a break point and swich update debugging on and check whether the program is populating reuqired parameters to determine the distribution model. by doing this you can understand what is going wrong....
    LBDMOU17
    PCHEAF01
    PCITEF01
    RBDSECOP
    RBDSEGLM
    if you are not able to check this let us know..
    Regards
    Naresh

  • How can I add Vender Batch FIELD for Movement Type 511

    Hi, guys,
    I tired to add a Vender Batch FIELD (LICHA) entry for Movement Type 511 through OMJJ/Field selection(Enjoy), but it's not allowed, is there any approach else to get it done? Thanks.
    Michael

    Hi,
    Try this path as SPRO-Materials Management-Inventory management and physical inventory-settings for enjoy transactions-settings for goods movement(MIGO)--field selection per movement type.
    If you add the field LICHA for movt 511.Make it optional or required entry whatever you want. It will come at the time of MIGO.
    Regards,
    Goraksh.

Maybe you are looking for