Open event for RAW files from Bridge

I installed the “Open As Layer.jsx” to promote the background into a layer and rename that layer to the file name. This is working perfect when I open the file via file menu from PS.
If I use a double-click from the Bridge it works only for JPEG’s and other files but not for RAW-files. As soon as ACR is involved, no open event is fired in Photoshop.
Is there a way to catch another event after the file is placed in PS? I tried to find some with the ScriptListener.8li but I don’t get a log entry.
Thanks for help.

Edit:
Glad to hear you got it working.
I'll just leave what i had put here anyway.
You want Program Files (x86)
That's where the 32 bit programs such as photoshop cs3 are on a windows 7 64 bit system.
Also, in bridge cs3 under Edit>Preferences>Thumbnails ensure Prefer Adobe Camera Raw for Jpeg and Tiff files is checked.
(then restart bridge cs3)

Similar Messages

  • Am useing a PC. Have Photoshop CS5, suddenly cannot move Raw files from bridge (or anywhere else) into photoshop. Jpeg move into photoshop ok, did get error message 1 what do I do to correct this                om bridge (or anywhere else for that matter)

    Useing a PC
    Have Photoshop CS5
    Suddenly cannot move Raw Files from Bridge (or anywhere else) into photoshop.
    I Can move Jpegs into ps the only issue is with Raw files
    I did get error1 message but as do not know what that means its no help
    any suggestions?

    Sorry for the late reply. My email firewall has become a little over zealous & sent a lot of my emails straight to my junk email folder, so I have only just now discovered your reply in my junk mail folder.
    The only "don't open files exceeding xxx megabytes" instruction I can find in my Prefs, is in the Bridge Prefs for Thumbnails, & mine is set at 1000mb. The biggest files I handle are bigger than 200mb so I should be able to open a few, not just one.
    However, this doesn't explain why I can open a psd format file of 180mb, close it, but then can't open a RAW format file of only 26mb immediately after.
    I can open the RAW file only if I restart my computer - very annoying!
    However, thanks for the advice about the video card & memory.
    So, I'm still stuck as to what the issue is.

  • I could not open my camera raw files from canon mark iii with my photoshop CS5. Tried to update Camera raw 6.7 but failed to install. Message said 'There was an error downloading this update. Please quit and try again later'. How could I open Raw files ?

    I could not open my camera raw files from canon mark iii with my photoshop CS5. Tried to update Camera raw 6.7 but failed to install. Message said 'There was an error downloading this update. Please quit and try again later'. How could I open Raw files ?

    Try installing it manually from:
    Adobe - Adobe Camera Raw and DNG Converter : For Windows : Camera Raw 6.7.1 Update
    Adobe - Adobe Camera Raw and DNG Converter : For Macintosh : Camera Raw 6.7.1 Update
    Regards,
    Ashutosh

  • Cannot open illustartor cc 2014 files from bridge

    cannot open illustartor cc 2014 files from bridge... after I installed Illustrator CC 2014 and updated Bridge CC I cannot open the Illustrator files from Bridge as it seems the path for opening such files still points to the old Illustrator CC folder which I have uninstalled from my computer

    still points to the old Illustrator CC folder which I have uninstalled from my computer
    Probably meaning you did not use the correct procedure for uninstall or have some remnants left of a trial. In Bridge Preferences File Type Associations you can change your default application for opening files of the wanted file types.

  • Mac OS 10.9.4 cannot open the NEF/RAW files from the new Nikon D810 Camera

    I have a new Nikon D810 camera. My new iMac cannot open the NEF/RAW files from it...Anyone have any knowledge of this?

    If you will take the time to send Apple feedback, they will add RAW support - when I got my Canon, it wasn't supported either. I filed feedback and, two months, later, there was an update which included my camera model.
    http://www.apple.com/feedback/macosx.html

  • Is there any system level support for RAW files from an Olympus XZ-10 camera.  I use Lion and iPhoto version 9.4.2

    Is there any system level support for RAW files from an Olympus XZ-10 camera.  I use Lion and iPhoto version 9.4.2

    If there is I can not find it - Google provides a list of possible methods form Adobe and others
    LN

  • Cannot open Canon CS2 Raw files in Bridges and Photoshop

    I cannot open Canon CS2 Raw files in Bridges and Photoshop. I have never been able to open it.

    Here are what cameras are supported by what version of the ACR plug-in and Lightroom:
    http://helpx.adobe.com/creative-suite/kb/camera-raw-plug-supported-cameras.html
    Here are what Adobe programs use what version of the ACR plug-in:
    http://helpx.adobe.com/x-productkb/global/camera-raw-compatible-applications.html

  • Where are the tutorials for Raw files from my Nikon?

    Where are the tutorials for Raw files from my Nikon?

    These tutorials should how to work in camera raw so you can edit NEFs.
    How to make non-destructive edits in Camera Raw | Adobe Photoshop CC tutorials

  • Where is Aperture support for raw files from Leica X Vario?

    Where is Aperture support for raw files from Leica X Vario?

    It doesn't appear to exist, at this time:
    http://www.apple.com/aperture/specs/raw.html

  • Camera raw won't open my raw files from bridge.  Mac user, camera, Nikon D800, latest camera raw update is installed.  Help!!

    I don't get a photo preview in bridge of my raw files, just the NEF file thing.  Then when I click to open them I get a message that says:  "If you are attempting to open a raw file from a digital camera, make sure you have the latest Camera Raw update installed via Help > Updates"   "If the problem persists, visit the following link for more information: http://www.adobe.com/go/kb407111".  I can't seem to figure out what to do!  Help Please!?

    Usually the problem with a newer Nikon camera is that the NEF files have been transferred or viewed with obsolete Nikon software, like Nikon Transfer for View NX, and those change something in the header of the raw file that makes it unrecognizable to Adobe products.
    For new images, the solution is to either stop using Nikon products to transfer and view your files or update your Nikon products to be as new as your camera.
    There is a utility to fix this particular corruption here:
    Fix Corrupted Nikon NEF Images

  • Photoshop CC doesn't open my camera raw files from my new Nikon D800 (ACR v 8.3.0.141)

    However, it opens camera raw files from my D300 without problems.
    Same for Bridge: NEF files are displayed as generic thumbs.
    Can anyone help me?

    I don't use the Nikon software, but I believe that the latest version of Nikon Transfer works fine. I think it comes with ViewNX2, which is a free download, AFAIK.
    I personally download my photos using a card reader and Adobe Bridge (which comes with Photoshop, and contains Adobe Photodownloader).  Not sure, but I think it's included with Lightroom & Elements too (but I don't use those either).  Using Photodownloader has the added advantage of being able to add metadata at the same time.

  • Why won't CS4 open the CR2 RAW files from my Canon G11?

    I am running Snow Leopard  V6.2. I have Adobe Design Premium with what I thought were all of the most recent updates loaded but when I tried to open one of the RAW files from my Canon G11  in PS CS4 it did not recognize the file type and it and would not open.  Wouldn't CS4 premium update also update PS CS4 with all the most recent files including ACR and the latest definitions?
    What version of ACR would have the latest RAW definitions for the G11 and how should it be loaded?

    Bennett Richards wrote:
    What is the correct way of installing the ACR plugin?  Just ru
    n the DMG or is there a file that must be placed in
    applications?
    This is what is written on that page:
    To open a DMG file:
    Double-click the file. This will open Disk Copy, which mounts the image on your desktop.
    Manual installation on Mac:
    1. Exit Photoshop CS4 and Adobe Bridge.
    2. Open the download file and double-click Setup, and follow the on-screen instructions.
    3. Launch Photoshop CS4 or Adobe Bridge.
    Is that so difficult?   

  • Cant open my CR2 raw files in Bridges camera raw

    Please help, I cannot open my raw files from my new 5d mark 3, in cs6 bridge or Ps for that matter, yes I know do an update from help-update and yes ive done this several times telling me im up to date. the downloader reads them and generates a jpeg thumb but when in bridge they will not render as a jpeg thumb and I cannot open in camera raw, just says do an update well ive done that and i cant get them to open.

    Ask in the PS and ACR forums and provide proper technical info. We don't even know what system you are on so this is pointless.
    Mylenium

  • Updates for raw files from Nikon D5000 on a photoshop elements 7 /windows 7 system

    I have photoshop elements 7 but it won't open raw files from a nikon D5000 although I've followed the links and updated. It still says it won't open because it's the wrong type of file..I've downloaded a DNG converter but still nothing is happening.

    You download and installed the camera raw 5.6 plugin, by following install directions on the following page?
    Adobe - Photoshop Elements : For Windows : Camera Raw 5.6 update
    If you have a windows 7 64 bit system, then the Camera Raw.8bi plugin goes in
    Program Files (x86)\Adobe\Photoshop Elements 7.0\Plug-Ins\File Formats
    (the path adobe gives is for a 32 bit windows system)
    Also, use the Camera Raw.8bi outside the folder named Win64

  • Confused - DNG Converter RC for RAW files from d810 - doesn't work...

    hi everyone -
    sorry for the stupid question, but i've never had to do this before. i read somewhere here that if you download camera raw 8_6 and dng converter 8_6 you can convert raw files from d810. i just tried that with the dng converter and it says that the files are not recognized.
    what am i doing wrong? can someone help me figure this out?
    many thanks in advance.

    The first thing to point out is that the release candidate will not recognize the new small raw format. You'll have to shoot the full-sized raw images. The other thing to be aware of is that, in the DNG converter, when being prompted for the location of your raw images, it is asking for the FOLDER. Choose the folder, but don't open it. Then the DNG converter will convert the raw files contained within that folder.
    If you want to shoot TIF, you would probably have better image data to work with than you would with JPEG images. But it still wouldn't be as flexible, and you wouldn't have as many options as you would shooting raw. Try the DNG converter with my suggestions and see if it works for you.

Maybe you are looking for

  • Price control for material as per delivery

    They are purchasing material which are used in the production process  these have a fluctuating price and the price paid is the price at the point of delivery not the point of ordering.  The prices are fixed for three months at a time but the deliver

  • Successful BC 2.1 in XP

    I just installed BC2.1 on my other MBP running XP. The download appeared in the Apple Software Update app and installed by itself, requiring a single reboot. No problems whatsoever. Some new hardware was recognized (BlueTooth) but other than that, I

  • User defined macro in SNP PB abends

    Hello We ahve a simple macro to clear a key figure value in the initial column. Macro works fine in Interactive planning. Maco abends with the error "Assertion Failed", when we run in the background.. Any pointers / help would be appreciated. Raghu

  • When i open my firefox browser i get alot of windows opening at the same time

    when i open my firefox browser i get alot of windows opening at the same time , this just started a couple of days ago , it is really annoying how do i fix this problem? this is the website that attacks my browser ... http://hosting.adjug.com/AdJugSe

  • Time machine volume does not appear but backup works..

    Hi. I have a Sno Leo server used for Time Machine backups. When I try to add a bew user to the backup, the backup volume does not appear (Time Machine Prefs > Select disk). The backup clients that have been previously set up work as normal.