Open Failed

We have an app which connects to the server using HTTPconnection and
updates the data. We have two scenarios. One when the phone is within the
network coverage area. In this case, the data is updated without any
problems. But there are situations where the app is used outside coverage
area. When there is no network, i write the data to a file and when the
network is avaialble this is sent to the server. Each and every
transaction will connect using http connection. This works well for 8
connections..when i try the 9th time ( still this is working in the
offline mode - no network ) it tries to connect and throws back the
error "open failed". I have closed and also set them to 'null'n all
httpconnections,inputstreams. Still i get this error. Please can anyone
help me.
Thanks
Bharani

If I was doing this I would:
1) Check who the owner is on the folder you can't open. It is probably benign but I still like to know. It may be System or something which would be okay.
2) Make a bootable clone backup of my computer before experimenting so I could always restore if things go bananas.
3) Put the items in the same folders on the computer as they are on the drive. repair permissions. Boot and keep fingers crossed. Cross fingers on other hand too and try using the dongle.

Similar Messages

TCP active open: Failed connect() Error: Connection timed out SMTP

Hi,
Messaging server version is,
./imsimta version
Sun Java(tm) System Messaging Server 6.2-6.01 (built Apr 3 2006)
libimta.so 6.2-6.01 (built 11:20:35, Apr 3 2006)
SunOS bglbbmr1-a-fixed 5.9 Generic_118558-28 sun4u sparc SUNW,Sun-Fire-V440
17-Dec-2008 10:47:40.08 1730.8e.741
tcp_local Q 4 [email protected] rfc822;[email protected] [email protected] /mta/queue/queue/tcp_local/013/ZUg0i1t9I0ZG~.00 <[email protected]>; TCP active open: Failed connect() Error: Connection timed out SMTP/xyz.my-domain.in
I have been getting this above error on my mail server from last
4-5 days. I am getting complaints from end users that the users can't
send any mails using Outlook but I did check with my test user I can
send mail by using webmail.
The Failed MX lookup Errors also getting in my logs the error detail given bellow.
17-Dec-2008 10:47:39.65 1730.91.737
tcp_local - Y TCP|0.0.0.0||209.85.143.114|25 SMTP/airtelmail.in/aspmx.l.google.com
17-Dec-2008 10:47:39.92 1754.41.255
tcp_notify - Y SMTP/infomedia18.in/infomedia18.in
17-Dec-2008 10:47:39.92 1754.41.256
tcp_notify Q 7 rfc822;[email protected] [email protected] /mta/queue/queue/tcp_notify/017/ZXg0i1t3U_ZoD.00 <[email protected]>; Failed MX lookup; try again later
17-Dec-2008 10:47:39.94 1754.41.257
tcp_notify Q 6 rfc822;[email protected] [email protected] /mta/queue/queue/tcp_notify/010/ZXg0i1t3U_ZoF.00 <0KBZ003MRGU7MQ30@my-domain> Failed MX lookup; try again later
I tried stopping and starting msg service using stop-msg and start-msg to sort out this above problem but no result. :(
When I do check the tcp_local queue it has been growing every day as well the tcp_notification queue also.
/opt/SUNWmsgsr/sbin/imsimta qm su
Messages
Channel Queued Size (Kb) Oldest
tcp_notify 10741 1080610.61 16 Dec, 00:59:24
tcp_local 8334 733849.31 15 Dec, 00:19:00
tcp_lmtpcn 0 0.00
tcp_be 0 0.00
reprocess 0 0.00
process 0 0.00
conversion 0 0.00
Totals 19075 1814459.92
This queues are increasing day by day.
One more thing is that I cant see a service/channel called CONVERSION running on my server when i do use this command.
ps -aef | grep conversion
root 6144 6000 0 11:14:28 pts/1 0:00 grep conversion
When i try to start it using imsimta qm utility, output shows as
qm.maint>; start conversion
QM-I-STARTED, channel was not stopped
qm.maint>;
Later I stopped and started conversion channel
qm.maint>; stop conversion
QM-I-STOPPED, channel stopped
qm.maint>; start conversion
QM-I-STARTED, channel started
qm.maint>;
I can see that on other servers the conversion channel is running and few msges are in queue. I do have other servers which running the same messaging server. But I am not getting why don't on this server. Where both servers having the same configuration.
Please, help me to sort out this issue.
Thanks in advance....
BSK

Thanks Mr. Shane,
The server which is running conversion channel.
ps -eaf|grep conversion
mailserv 16824 8472 3 17:08:11 ? 0:48 /opt/SUNWmsgsr/lib/conversion
mailserv 28728 8472 0 17:17:30 ? 0:00 /opt/SUNWmsgsr/lib/conversion
root 1057 26387 0 17:18:12 pts/1 0:00 grep conversion
more /opt/SUNWmsgsr/config/conversions
in-channel=*; in-type=application; in-subtype=*; in-disposition=*;
parameter-symbol-0=NAME; parameter-copy-0=*;
dparameter-symbol-0=FILENAME; dparameter-copy-0=*;
message-header-file=2; original-header-file=1;
override-header-file=1; override-option-file=1;
command="/opt/SUNWmsgsr/private/virusscan.sh"
in-channel=*; in-type=x-zip-compressed; in-subtype=*; in-disposition=*;
parameter-symbol-0=NAME; parameter-copy-0=*;
dparameter-symbol-0=FILENAME; dparameter-copy-0=*;
message-header-file=2; original-header-file=1;
override-header-file=1; override-option-file=1;
command="/opt/SUNWmsgsr/private/virusscan.sh"
in-channel=*; in-type=image; in-subtype=*; in-disposition=*;
parameter-symbol-0=NAME; parameter-copy-0=*;
dparameter-symbol-0=FILENAME; dparameter-copy-0=*;
message-header-file=2; original-header-file=1;
override-header-file=1; override-option-file=1;
command="/opt/SUNWmsgsr/private/virusscan.sh"
in-channel=*; in-type=audio; in-subtype=*; in-disposition=*;
parameter-symbol-0=NAME; parameter-copy-0=*;
dparameter-symbol-0=FILENAME; dparameter-copy-0=*;
message-header-file=2; original-header-file=1;
override-header-file=1; override-option-file=1;
command="/opt/SUNWmsgsr/private/virusscan.sh"
in-channel=*; in-type=video; in-subtype=*; in-disposition=*;
parameter-symbol-0=NAME; parameter-copy-0=*;
dparameter-symbol-0=FILENAME; dparameter-copy-0=*;
message-header-file=2; original-header-file=1;
override-header-file=1; override-option-file=1;
command="/opt/SUNWmsgsr/private/virusscan.sh"
Following entry from /opt/SUNWmsgsr/lib/config-templates/imta_tailor
IMTA_CONVERSION_FILE=<msg.RootPathUNIX>/config/conversions
The server which doesnt show running conversion channel
#more /opt/SUNWmsgsr/config/conversions
!in-channel=*; in-type=*; in-subtype=*; in-disposition=*;
! parameter-symbol-0=NAME; parameter-copy-0=*;
! dparameter-symbol-0=FILENAME; dparameter-copy-0=*;
! message-header-file=2; original-header-file=1;
! override-header-file=1; override-option-file=1;
! command="/opt/SUNWmsgsr/private/virusscan.sh"
in-channel=*; in-type=application; in-subtype=*; in-disposition=*;
parameter-symbol-0=NAME; parameter-copy-0=*;
dparameter-symbol-0=FILENAME; dparameter-copy-0=*;
message-header-file=2; original-header-file=1;
override-header-file=1; override-option-file=1;
command="/opt/SUNWmsgsr/private/virusscan.sh"
in-channel=*; in-type=x-zip-compressed; in-subtype=*; in-disposition=*;
parameter-symbol-0=NAME; parameter-copy-0=*;
dparameter-symbol-0=FILENAME; dparameter-copy-0=*;
message-header-file=2; original-header-file=1;
override-header-file=1; override-option-file=1;
command="/opt/SUNWmsgsr/private/virusscan.sh"
in-channel=*; in-type=image; in-subtype=*; in-disposition=*;
parameter-symbol-0=NAME; parameter-copy-0=*;
dparameter-symbol-0=FILENAME; dparameter-copy-0=*;
message-header-file=2; original-header-file=1;
override-header-file=1; override-option-file=1;
command="/opt/SUNWmsgsr/private/virusscan.sh"
in-channel=*; in-type=audio; in-subtype=*; in-disposition=*;
parameter-symbol-0=NAME; parameter-copy-0=*;
dparameter-symbol-0=FILENAME; dparameter-copy-0=*;
message-header-file=2; original-header-file=1;
override-header-file=1; override-option-file=1;
command="/opt/SUNWmsgsr/private/virusscan.sh"
in-channel=*; in-type=video; in-subtype=*; in-disposition=*;
parameter-symbol-0=NAME; parameter-copy-0=*;
dparameter-symbol-0=FILENAME; dparameter-copy-0=*;
message-header-file=2; original-header-file=1;
override-header-file=1; override-option-file=1;
command="/opt/SUNWmsgsr/private/virusscan.sh"
Following entry from /opt/SUNWmsgsr/lib/config-templates/imta_tailor
IMTA_CONVERSION_FILE=<msg.RootPathUNIX>/config/conversions
Is this above information u r asking?
As u wrote erlier, the conversion channel works some times and some times doesn't work.
Thanks lot...
BSKADAM

Error message: "Webcam driver open fail" for Satellite L305-S5875

Problem: Webcam is not working and when Camera Assistant Software is started up, the Error message, "Webcam driver open fail" pops up.
Computer: Notebook Satellite L305-S5875
OS: Windows Vista
In troubleshooting, I have unsuccessfully tried the following: Changed the webcam driver several times, rolled back driver, updated driver, and tried Chicony 2.0 USB driver, and a few other webcam drivers. The webcam initially worked fine, but about a month after installing and using Skype video, the webcam suddenly stopped working and on reboot I got the error message.
I've stopped Skype and Camera Assistant Software at startup and manually start them, as someone suggested this as a solution. I've uninstalled both and reinstalled several times. I've tried one software without the other installed... trying every possible arrangement for a solution, to no avail.
I called Customer Support and John, although very nice and patient, was not helpful. He said he'd research and call back. Didn't.
I've gone to Chicony website to try to find an more current driver than January 07. When I let Windows install the latest from the web, it installs a Microsoft 2006 driver. I don't think it's a hardware issue, as it started acting up after Skype installed. I also tried System Restore, but that didn't work either.
Suggestions?
Thanks,
SteveCo

Thanks Jerry. I spent hours going through the links you provided and tried some of the suggestions looking for a solution. Nothing worked.
I tried uninstalling Toshiba's Camera Assist software and Skype (Skype initially seemed to be the instigator of the problem), completely removing both from the registry, and removing the webcam with Device Manager. Then I made sure Vista was up to date, and then installed the latest Toshiba Camera Assist software from the Toshiba download page. After installation and rebooting, I'm getting the same error message: "Webcam driver open fail."
The webcam used to work, before we installed Skype and used it a few times. From the other posts I've read, it does seem to be a common problem... usually after Skype or another webcam-using software is installed and run.
We have another Toshiba laptop: A215-S4757, that has the same OS and webcam-using programs, and it does not have an issue. Apparently though , after going through all the links on the European message board, you provided, the L305 model is having a problem.
Open for suggestions.
SteveCo

Re: Satellite A300 PSAGCA -02Y010 - Error: Webcam driver open failed

Problem:
Recieve error every time I try to use Camera Assistance Software for Toshiba: Webcam driver open failed. Please restart camera or computer. Web cam also does not work in Skype. It seems that this is a very common problem with the A300s series, yet there is no clear solution out there.
Hardware
Series: A300
Model: PSAGCA -02Y010
Software
Operating System: Windows 7 64-bit
Camera Assistant Software for Toshiba: 1.7.175.0123
Details
I recently did a clean install of Windows 7, updating from Windows Vista. I never used the web cam on Windows Vista, so I can't testify as to whether the web camera was workin correctly or not. However, when I tried to use it with Skype, it did not work. I reinstalled the driver that I backed up before I installed the new operating system, but it did not work. The web cam doesn't show up at all in Device Manager - even when set to display hidden devices. Trying to add new hardware through the control panel fails to detect the web camera at all. I have restarted after every install/repair of the driver.
Steps Taken
Reinstalled backuped drivers
I used third party software (Double Driver) to back up and reinstall the drivers for the web camera after I installed Windows 7. Double Driver claimed there was no device to install the driver for. I manually copied the files into the Camera Assistance folder and overwrote the existing ones. The files I copied were:
casflr.cat
oem34.inf
restore.ini
UVCFTR_S.SYS
Reinstalled Drivers from Toshiba Website
Extensive goolging has only turned up recommendations to uninstall and reinstall drivers. I was unable to find any drivers specifically for windows 7 64-bit, but I did try those for my model of laptop for Windows Vista 64-bit - no luck. I tried installing Camera Assistance Software for Toshiba, which as far as I can tell, includes the driver - it only gives me the error described above.
I also tried locating a generic Windows 7 driver for the web camera - I was unable to find one.
Check Registry Value Is Correct
I have also tried checked the registry value at HKEY_LOCAL_MACHINE/System/ControlSet001/Enum/USB/SN001/ClassUID matches the value in C:\Program Files (x86)\Camera Assistant Software for Toshiba\driver\64bit\casflr.inf as and C:\Program Files (x86)\Camera Assistant Software for Toshiba\driver\32bit\casflr.inf recommended by some article recommend.
Please, I would really appreciate it if anyone could help me out here. I have exhausted all the options I can think of.
Likely Solution:
I encountered a thread post that suggested a loose wire was responsible and that the camera would work when the lid was almost closed. I tried this and the camera suddenly appeared in device manager. However, I still can't get it to work with Camera Assistant Software or Skype.
Message was edited by: A300Owner

Hi - I'm a newbie to this forum.
I have an A300 Satellite Pro - not even 2 years old.
In the last 2 days I have 2 problems that I think are possibly related.
1. Like others on here I now cannot get my internal webcam to work. I get the 'webcam driver open failed' message. I have read some forums etc and today I have:
a) loaded most recent BIOS,
b) reloaded the webcam software drivers (the most recent seems to be from 2008!)
c) restarted my laptop about 20 times
Nothing works
2. In the last 2 days for the first time I keep getting the 'USB device not recognised' message that annoyingly crops up about every 10 seconds. I am assuming that the webcam is connected to a USB port (internal) and is no longer being recognised. Based on Google advice in various forums I have also:
1) Turned off the AC power supply
2.) Taken out the laptop battery and waited 5 mins - this apparently resets the BIOS
3) tried using device manager in various ways
Nothing bloody works!!
Maybe the hardware is damaged but I doubt it - I have not dropped the laptop, I always pack it carefully in a padded rucksack. It has always worked fine until 2 days ago.
Ashbo (very fed up)

I am trying to attach an Ipod touch to an older Power Book G4, It says that the Ipod cannot be used because it needs Itunes version 9.2 (running 8.0.1). When I try to install the latest 10.3.1 it says ("Open failed" requires Mac OX S 10.5

I am trying to attach an Ipod touch to an older Power Book G4.
Itunes says that the Ipod cannot be used because it needs Itunes version 9.2 (running 8.0.1).
When I try to install the latest Itunes version 10.3.1 Mac says ("Open failed" requires Mac OX S 10.5.

Click here and install the software.
(58765)

Log.0000000001: log file open failed

I have been seeing an error off and on recently where my app will go along just fine writing to dbxml - and then for no apparent reason, blow up with
log.0000000001: log file open failed: No such file or directory
PANIC: No such file or directory
When I go look - there is indeed no log.00000001 in my dbxml directory.
What is the story with log.00000001? When is it created? What would cause this creation to fail. I have seen this problem on both an XP system and a Unix system.
I think I have made this problem go away by manually creating an empty log.0000001 file before I start my app - but this seems bogus.
Any tips appreciated

Hi,
If you have multiple applications or processes using Berkeley DB XML (including our utility programs) you may have set up a separate log directory for your log files or they simply were created in another directory. For this reason you may want to consider using a DB_CONFIG file and setting the location for your log files there.
For more information about this please look at these references:
http://www.sleepycat.com/docs/ref/env/db_config.html
DB_CONFIG
http://www.sleepycat.com/docs/api_c/env_set_lg_dir.html
http://www.sleepycat.com/docs/api_c/env_set_data_dir.html
An example for how to insert this information in a DB_CONFIG file is:
set_data_dir datadir
set_lg_dir logdir
Regards,
Ron Cohen
Berkeley DB XML Support
Oracle Corporation

File Open Failed?

H'ello
Sometimes when I try to transfer a book I have downloaded to ADE to my ereader I get the error message: File Open Failed.Other times they are successfully transfered. These are all downloaded from my library - so all consistently the same. Help.
Thanks in advance if you can be of assistance.

You can't do anything at all about restrictions on digital rights. I said
that earlier. But I want to take a moment to discuss the concerns you've
included in this post.
To start with, each ebook either has digital rights assigned or not. So,
if one cannot be copied, that does not mean that any others can't. You may
- make that will - run into other ebooks that can't be copied, and it will
be a pain in the butt when you do. But, don't assume that ALL ebooks are
going to be a problem.
I think you missed another point that I made. This is not the fault of ADE
- the software is just doing the job it's been programmed to do with each
ebook you download. You don't need to do anything to ADE.
Let's tackle the comment you made about downloading ebooks from a library.
Technically, the library allowed you to download the ebook - to your
computer. That's really all they have to do. You can call the library and
tell them that the library ebook you downloaded can't be copied to your
ereader and see if they can do something about that. I am doubtful,
though, because publishers - not the library - don't want people to
redistribute their ebooks, and that's one reason they block copying.
It's possible also to download an ebook directly to your ereader IF the
library or bookseller is set up to do that. Most libraries are not.
You mention that there are other times that you get the 'File Open Failed'
message. If you give me more information about the circumstances, I'll try
to work with you to figure out what to do
===================

File Open failed Error in Process Chain

Hi,
Our process chains are failing at the last step of event trigger.The file is not getting created in the directory as a result of which the BO reports are not getting triggered.Kindly help.
Regards,
Shalaka

Pl find the below code:
DATA mesg(80) VALUE 'BW load complete. Ready for BOBJ Refresh. File Created on : '.
DATA fname(60).
DATA pc_flag TYPE rspc_state.
* Get the folder and file name from parameter
PARAMETERS p_fname TYPE string LOWER CASE.
AT SELECTION-SCREEN.
START-OF-SELECTION.
   fname = p_fname.
*Add the system date into the file.
   CONCATENATE mesg sy-datum INTO mesg.
   CALL FUNCTION 'AUTHORITY_CHECK_DATASET'
   EXPORTING
* PROGRAM =
activity = 'DELETE'
filename = fname
EXCEPTIONS no_authority = 1
         activity_unknown = 2
         OTHERS   = 3 .
   IF sy-subrc = 0.
*Delete the file if it is already existing
     DELETE DATASET fname.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
   ELSE.
     MESSAGE i051(rsar) WITH 'No Authorizations to delete the file'.
   ENDIF.
   WAIT UP TO 65 SECONDS.
*Set the flag for the process chain to read if file deletion fails.
   IF sy-subrc <> 0." The ABAP program failed
     pc_flag = zcl_abap_bobj_event_trg=>failed.
   ELSE. " The ABAP program was successful
     pc_flag = zcl_abap_bobj_event_trg=>success.
   ENDIF.
   CALL FUNCTION 'AUTHORITY_CHECK_DATASET'
     EXPORTING
       activity         = 'WRITE'
       filename         = fname
     EXCEPTIONS
       no_authority     = 1
       activity_unknown = 2.
   IF sy-subrc <> 0.
     MESSAGE i051(rsar) WITH 'No Authorizations to Write to file'.
   ELSE.
*Create the file based on the input from variant including folder and file name.
     OPEN DATASET fname FOR OUTPUT IN TEXT MODE ENCODING DEFAULT.
*Set the flag for the process chain to read if file creation fails.
     IF sy-subrc <> 0.
       MESSAGE i051(rsar) WITH 'File open failed.'.
       pc_flag = zcl_abap_bobj_event_trg=>failed.
     ELSE. " The ABAP program was successful
       TRANSFER mesg TO fname.
       pc_flag = zcl_abap_bobj_event_trg=>success.
     ENDIF.
     CLOSE DATASET fname.
   ENDIF.
   EXPORT e_state FROM pc_flag TO DATABASE indx(bo) ID
   zcl_abap_bobj_event_trg=>status_idx_id.

How to resolve "open failed"error while starting dbisqlc utility in UNIX b

how to resolve the following error while starting dbisqlc utility in UNIX box...??
Unix Prompt% which dbisqlc
/sybase/asiq12/bin/dbisqlc
Unix Prompt%
Unix Prompt% dbisqlc
ld.so.1: dbisqlc: fatal: libdblib9_r.so: open failed: No such file or directory
zsh: killed dbisqlc
Unix Prompt%

rm.vikram wrote:
how to resolve the following error while starting dbisqlc utility in UNIX box...??
Unix Prompt% which dbisqlc
/sybase/asiq12/bin/dbisqlc
Unix Prompt%
Unix Prompt% dbisqlc
ld.so.1: dbisqlc: fatal: libdblib9_r.so: open failed: No such file or directory
zsh: killed dbisqlc
Unix Prompt%It may not help, but a quick google search for that library gave a link to http://www.sybase.com/content/1040797/deployadmintoolslinux.pdf, and from within that:
Interactive SQL files
Copy the following files from your reference installation:
/opt/sybase/SYBSsa9/bin/dbisql
/opt/sybase/SYBSsa9/java/dbmaen9.jar
/opt/sybase/SYBSsa9/java/isql.jar
/opt/sybase/SYBSsa9/java/jlogon.jar
/opt/sybase/SYBSsa9/java/xerces.jar
/opt/sybase/SYBSsa9/java/xml4j.jar
3
Copyright © 2004 iAnywhere Solutions, Inc.
/opt/sybase/SYBSsa9/lib/libdblib9_r.so.1
/opt/sybase/SYBSsa9/lib/libdbtool9_r.so.1
/opt/sybase/SYBSsa9/res/asa.cvf
/opt/sybase/SYBSsa9/res/dblgen9.res
/opt/sybase/shared/java/HelpManager11.jar
/opt/sybase/shared/java/JComponents142.jar
/opt/sybase/shared/java/SCEditor142.jar
/opt/sybase/shared/java/jsyblib142.jar
/opt/sybase/shared/sun/javahelp-1_1/jh.jar
Create the following symbolic links in /opt/SYBSsa9/lib:
libdblib9_r.so -> libdblib9_r.so.1
libdbtool9_r.so -> libdbtool9_r.so.1which may suggest a solution.

SpamAssassin / Amavisd tuning - TCP active open: Failed connect() errors

I started this post as we were experiencing a problem with occassional delayed mail delivery to our mail store. As I continued writing it, I think that I've resolved it. But I wanted to post this anyway so if I'm doing things right it might help someone else; or, if I'm doing something wrong someone can correct me. :) For reference, we have a quad Sun v440, and process about 500,000 messages a day.
We were seeing messages like this in our log files:
09-Nov-2006 08:28:09.37 tcp_scan Q 1 [email protected] rfc822;[email protected] @tcp_scan-daemon:[email protected] TCP active open: Failed connect() Error: Connection timed out
example.com represents our local domain. The errors seemed to occur proportionally to the amount of incoming mail we received. That is, we saw more of them under load.
We are running SpamAssassin, Amavisd/clamav, and:
Sun Java(tm) System Messaging Server 6.2-5.01 (built Nov 22 2005)
libimta.so 6.2-5.01 (built 11:57:57, Nov 22 2005)
SunOS hostname 5.9 Generic_118558-11 sun4u sparc SUNW,Sun-Fire-V440
This line seems to say that the message is in the tcp_scan channel, and cannot send to 127.0.0.1:10024 (amavisd) because that port isn't listening.
My amavisd max_servers was set at 15. After reading http://www.ijs.si/software/amavisd/amavisd-new-magdeburg-20050519.pdf and making a wild guess, I increased it to 30. The errors were less frequent, but still occurred.
The output of 'sar -d' showed that my local disk was experiencing upwards of 80% utilization. I moved the amavisd temp directory and the spamassassin bayes db to a san volume, and that sped everything up dramatically. The connect errors went away, clamav avg time per message is at 4 seconds down from 10. I am now receiving errors from spamassassin that say:
Nov 9 10:27:27 hostname.example.com spamd[21601]: prefork: server reached --max-children setting, consider raising it
My --max-children is set to 25 right now, and the server is cpu bound under heavy load, so I see no reason to raise it.
So this is my setup. I am no longer having an immediate problem, but comments/questions are welcome.
Config files related to my setup are below.
Excerpts of imta.cnf:
! tcp_scan
[] $E$R${tcp_scan,$L}$U%[$L]@tcp_scan-daemon
! ims-ms
ims-ms defragment subdirs 20 notices 1 7 14 21 28 backoff "pt5m" "pt10m" "pt30m" "pt1h" "pt2h" "pt4h" maxjobs 2 pool IMS_POOL destinat
ionspamfilter1 fileinto $U+$S@$D
ims-ms-daemon
! tcp_local
tcp_local smtp mx single_sys remotehost inner switchchannel identnonenumeric subdirs 20 maxjobs 7 pool SMTP_POOL saslswitchchannel tcp
auth maytlsserver maysaslserver missingrecipientpolicy 0 aliasdetourhost tcpscan-daemon
tcp-daemon
! tcp_intranet
tcp_intranet smtp mx single_sys subdirs 20 dequeue_removeroute maxjobs 7 pool SMTP_POOL allowswitchchannel saslswitchchannel tcp_auth
maytlsserver maysaslserver missingrecipientpolicy 4 aliasdetourhost tcp_scan-daemon
tcp_intranet-daemon
! tcp_scan
tcp_scan smtp single_sys subdirs 5 notices 1 backoff "pt10m" "pt30m" "pt2h" "pt4h" dequeue_removeroute maxjobs 7 pool SMTP_POOL daemon
[127.0.0.1] port 10024
tcp_scan-daemon
option.dat:
SPAMFILTER1_LIBRARY=/opt/sunjes/SUNWmsgsr/lib/libspamass.so
SPAMFILTER1_CONFIG_FILE=/opt/sunjes/SUNWmsgsr/config/SpamAssassin
SPAMFILTER1_STRING_ACTION=data:,require ["addheader"]; addheader "Spam-test: $U"; require "fileinto"; fileinto "Junk";
SPAMFILTER1_OPTIONAL=1
dispatcher.cnf:
[SERVICE=SMTP-SCAN]
DEBUG=-1
PARAMETER=CHANNEL=tcp_scan
PORT=10025
IMAGE=IMTA_BIN:tcp_smtp_server
LOGFILE=IMTA_LOG:tcp_scan-server.log
STACKSIZE=2048000
INTERFACE_ADDRESS=127.0.0.1
SpamAssassin:
host=127.0.0.1
port=783
debug=0
mode=1
field=
verdict=Junk
USE_CHECK=0

Suggest dropping Amavis in preference to the built-in
integration, per our documentation. Simpler, more
performant.Sorry, my title wasn't very accurate. We are running SpamAssassin through the built in integration, and clamav through amavisd. There isn't any built in integration to clamav, is there?

TCP active open: Failed connect()

hi all,
i receive error from my email like
"TCP active open: Failed connect()x.x.x.x :25(No formatted text for errno = 111)"

Hi Mustapah,
if the error is in the email, then the hostname and/or IP address of the reporting server/appliance should be in there.
I suggest you try to look up the message in message tracking of your IronPort's GUI, this will tell you if the message was received by your appliance(s), and also if it was bounced on the appliance or on a different server.
Hope that helps,
Andreas

TCP active open: Failed connect() Error: Connection timed out

Hi,
There is one message which can't be delieved to the recepient with error " TCP active open: Failed connect() Error: Connection timed out" This is the error that we found in the mail.log_current file.
I have no problem sending email to the same address from my hotmail account.
any suggestion ?
Thanks,
Joe

The message can only mean one thing. Your server cannot connect to that host.
It's possible that the remote system is lying to your Messaging Server, and that's gotten it confused. Some firewalls do this by repeating the entire capability string from the server behind them, but can't actually handle all the capabilities.
PIX firewalls do this.
When you connect, they pretend to be able to "startls", but if you try, they hang up. They appear to handle "EHLO", but when you try, they hang up.
You can put debugging on the tcp_local channel, and see the actual conversation, if you like.
master_debug and slave_debug go into the imta.cnf definition line. MM_DEBUG=5 goes at the end of your option.dat file.
then
imsimta cnbuild
imsimta restart
will attempt to send the message. You will want to back the changes out, as you'll get lots of extra log files you really don't need.
Post the log file, and we can see what's happening.

Loading shared library failed: Reports fatal: libgcc_s.so.1 : open failed

Hi,
I am developing a shared library in solaris. While loading the shared library it reports "ld.so.1: tn-tipc-config-bin: fatal: libgcc_s.so.1: open failed: No such file or directory". I noticed that libgcc_so.1 is available at /usr/sfw/lib. But this library is missing in some solaris build/install configuration. I want my library to loaded in any solaris system. So I want to reduce dependency over libgcc_s.so.1. By looking at the objdump of my shared library, I found that references to
__register_frame_info and __deregister_frame_info which are provided by libgcc_s.so.1. Looks like these references are added by gccfss compiler since I dont call these functions in my code. Please suggest a method to remove reference for these functions.
Thanks
Shankar

If you don't want to bring libraries your app depends on with you, the only choice you have is linking statically. It is a very bad idea to manually "detach" compiler-supplied library from the application unless you know exactly what you are doing. Even if your library does not call anything directly, initialization routines inserted by compiler may need routines from that library (just as an example).

ORA-00313: open failed for members of log group 4 of thread 2

Hi.
i have found the below error in one of RAC instance.Could you please advise on this since i am new to RAC env
ORA-00313: open failed for members of log group 4 of thread 2
ORA-00312: online log 4 thread 2: '+NEWDISK_GROUP/DEMO/onlinelog/group_4.1453.1029312423'
ORA-17503: ksfdopn:2 Failed to open file +NEWDISK_GROUP/DEMO/onlinelog/group_4.1453.1029312423
ORA-15032: not all alterations performed
ORA-29702: error occurred in Cluster Group Service operation
ORA-29702: error occurred in Cluster Group Service operation
Thanks
Sai

any update on this?

Oracle 11g wallet open failed

Hi All:
I have being having issues with oracle wallet on oracle 11g Release 2.
I have an application that cannot connect to the database due to the wallet. Wallet is now becoming a nightmare for developers of application connecting to oracle.
SQL> startup
ORACLE instance started.
Total System Global Area 1068937216 bytes
Fixed Size 2260032 bytes
Variable Size 1035994048 bytes
Database Buffers 25165824 bytes
Redo Buffers 5517312 bytes
Database mounted.
ORA-01092: ORACLE instance terminated. Disconnection forced
ORA-12578: TNS:wallet open failed
Process ID: 5964
Session ID: 5 Serial number: 3
Regards,
Jude

user10257931 wrote:
No its a company Mobile workstation Laptop with a client data i am trying to retrieve. The data was loaded through an application. The original owner of the laptop moved on to another region. A username and password with administrative privilege was created for me. I was able to connect to oracle but had issues with wallet when i connect to the application. The previous owner of the laptop could connect successfully using his local admin account. I started creating and deleting wallet until i had the issue. Ok... got your issue....
Wallet key depends upon the hostname and ip configuration. so every time you move your laptop to other region it ip hostname changes.
When you created wallet initially, it looked the ip and hostname address in wallet key....
The solution would be to remove wallet from wallet manager...Or when creating wallet ensure to fix the ip hostname....
Also see following mos note on this
How To Prevent The Secure Password Store Wallet From Being Moved to Another Host [ID 1114599.1]
Does that help?

ORA-00313: open failed for members of log group 1 of thread 1

Hi
I'm restoring a database on a different host. I have the backups, from which I want to restore the database. I made the corresponding changes in the initSID.ora file and started the script to do the restore.These are the steps I followed:
connect target=/
run{
startup nomount;
allocate channel c1 type disk;
allocate channel c2 type disk;
allocate channel c3 type disk;
allocate channel c4 type disk;
restore controlfile from '/tmp_backups/rman/lev0_open_cf_SID_2826_1';
alter database mount;
set newname for all datafiles
restore database;
set until logseq = 29317 thread = 1;
switch datafile all;
recover database;
alter database open resetlogs;
One mistake I made here is that logseq should have been last seq+1, which I did not do. I have it as last seq.
Restore of datafiles and switching of datafiles was fine. But I get error for redo log files.
ORA-00313: open failed for members of log group 1 of thread 1
ORA-00312: online log 1 thread 1: '/u13/oradata/SID/redo02a.log'
ORA-27037: unable to obtain file status
SVR4 Error: 2: No such file or directory
Additional information: 3
Why is it looking for at the old path yet?
I'm not sure what I missed and how to proceed. Please help.
Thanks,
Mamata

I do believe that set newname for all datafiles only means actual datafiles and no redo logs. So with open resetlogs, Oracle tries to create new redo logfiles where the backup controlfiles says they are.
As with creating a auxilliary database in another filesystem, we use DB_NAME_FILE_CONVERT and LOG_FILE_NAME_CONVERT.
I am not sure if it is possible to type "set newname for all datafiles" and expect also the redo logfiles to change location.
You might try to set these two parameters and see if it works.
good luck.
rgds
Kjell Ove

Open Failed

Similar Messages

Maybe you are looking for