Open File Sequence resulting in only a fraction of the frames being opened.

I am experiencing something very bizarre with QT Pro 7.2
I'm opening an image sequence, at QT is only opening every 16th file. The total Targa sequence is 273 files and are named as follows:
theater - folding chairs0001.tga
theater - folding chairs0002.tga
theater - folding chairs0273.tga
I'm not doing anything unusual when I open them. There's nothing unusual in the formatting either (QT on Windows has no problem opening the same sequence). If I look in the Movie Properties, only frames 1,17,33,49,65,81,97,113 are included in the Resources list.
This makes no sense.

I used FileBuddy to rename the image sequence to footage001.tga and QT was able to open it properly.
So apparently QT didn't like the naming scheme

Similar Messages

  • HT1461 For Boot Camp, if you save a file when you are on the Windows side, when you return to the Mac side, can you see the file or can it only be "seen" on the operating side you create it in?

    For Boot Camp, if you save a file when you are on the Windows side, when you return to the Mac side, can you see the file or can it only be "seen" on the operating side you create it in?

    Why don't you  (generic most every post lacks critical details) be clear and say you never used Mac OS etc.
    But, I did try to anticipate and give you what you needed.
    Excel is one of those rare programs that, if they are extremely large complex spreadsheets still tend to run better under Office for Windows.
    A VM won't do for that but it does make it easier to transition. As in: install Windows natively, then use VMware Fusion or Parallels to attach to the partition and OS. That way you can run Windows as Guest OS VM under Mac; and still run Windows natively dual-boot when needed.
    The word "see" was not what you wanted, was it? really? you want to open and make changes and keep it on Windows side rather than Save As or copy to Mac
    You use Windows and don't know it has NTFS (NT FileSystem)?
    http://en.wikipedia.org/wiki/NTFS
    http://en.wikipedia.org/wiki/Hierarchical_File_System (HFS) native file system used by Apple
    And there is much more UEFI style "bios" and other things I suppose.
    Great thing about Google and encyclopedias or dictionary, you can look up what you don't know.

  • My new iPad2 synched OK on initial setup but I didn't really want all the photos in iPhoto transferred so on  later synch I tried limiting the sych to certain albums only to find that only a fraction of the albums now on the iPad. I tried synching again.

    My new iPad2 set up OK with all the photos in my iPhoto transferring . On a later synch I tried limiting the transfer to only certain albums. After that I find only a fraction of the desired albums transferred. I tried synching again without any restrictions but get the same limited number of photos and albums. I think I've seen the solution to this fault somewhere - something to do with deleting the iPhoto cache but can't find it.

    Update: I was unsuccessful on my attempt to delete the iPhoto Cache folder because I didn't follow the directions exactly. There seems to be more than one folder with an identical name. Finally succeeded in getting all my photos back on the iPad2.
    If one desires to change the selection of photos snc'd, however, it apears that you must change the selecion from the iTunes screen while the iPad is plugged in and the select "Apply". Unfortunate, the sync starts immediately when you plug the iPad in and it doesn't seem to smart to stop the sync. It appears you have to make a change in iTunes while syncing. Let it complete. Detach the iPad. Go back and delete the iPhoto cache ad directed. Then the next time you sync presumably the new sync restrictions will apply. I didn't want to risk stopping the sync that started automatically to change the sync options and then direct it to sync again but that might work. Too bad we don't have more control over the starting of syn when the iPad is attached. Maybe we actually do but I haven't noticed it.

  • Triggered Cameralink Acquisition only Capturing Half of the Frames

    Hello all,
    I am aware of this page -- http://digital.ni.com/public.nsf/allkb/6FFA526966E2D29386257AA80054730A
    It describes my problem well, but I cannot find a good solution.
    I have four cameras that need to be triggered at the same time (they cannot be free-running!)... if I only trigger the cameras, and allow the frame grabbers to run without a trigger, I end up sporadically missing frames at higher and higher frame rates.  At 100FPS I lose about 40% of the data, but around 50FPS I capture all the data fine.
    When I trigger both the frame grabber cards (1430s) with the cameras, I seem to consistently miss every other frame.
    I have tried triggering the cameras on a rising edge and the cards on the falling edge, but no matter what I do I end up only collecting half of the frames I would expect to collect over a period of time.
    Below is a snippet of code that I'm using for the acquisition, is anything glaringly obvious???
    Thanks for any suggestions!
    -MK

    It sounds like the fastest your camera can go with an external trigger is 50 Hz.  As soon as you go faster than that, you miss every other trigger because the camera is still busy handling the previous trigger.
    Will the camera go faster in free run?  If so, it is probably just a hardware limit on triggering.  If not, it could be your exposure time is limiting the frame rate.
    Did you include details of which camera you are using?  That information would be useful.
    Bruce

  • Result Processing - Additional results work only when any of the "Output Name" Enabled

    Only if i   ENABLE  any result type  only then the SequenceFilePostResultListEntry    is called
    the thing is I have aditional results & I save them in TDM format
    hence I dont need  the options from the   Result processing  
    is this  functional behaviour  expected from   teststand

    Hello aparab,
    i have greated a StationGlobals ReportActivated and fill this global in the callback
    ReportOptions with the the flag, if the report generation is disabled or not.
    In the SequenceFilePostResultListEntry a if structure is insert that ckecks the flag.
    Hope this helps.
    best regards
    Alexander Glasner
    AE NIE
    Attachments:
    SequenceFilePostResultListEntry.seq ‏11 KB

  • Image Sequence Settings in QT Pro - what is the Frame Rate range available?

    I am considering purchasing QT Pro for Windows. I wish to make a time lapse movie out of a series of pictures. I would like to know what the range of options is for the "Image Sequence Settings" in File->Open image Sequence... menu. Does is it go well beyond 1 second?
    Thanks!
    Chris

    Frames rates are from 10 seconds per frame up to 60 frames per second.
    I make many image sequence movies and just start with one frame per second.
    I then "add scaled" to a properly timed audio only file. This way you can get nearly any frame rate you could ever need.

  • The size of the vault is only a fraction of the size of the library

    There are about 3,000 photographs in the library. All masters are relocated to an external hard drive. The size of the masters is about 34GB, which should be correct. However, the size of the vault is only about 5GB. This does not make any sense.
    Do you have any idea what might be wrong?

    Hmmm... that doesn't sound right. If you have lots of large previews I could see the main library being about double the size of the vault (assuming your master files are JPEGs... in which case previews don't really make sense), but it may be worth checking inside each package file to see what's missing.
    The vault will be smaller because it doesn't include previews or thumbnails... but not that much smaller.

  • Only a fraction of the email addresses I have received mail and sent mail to show up i my collected addresses list.

    I have thousands of email addresses I have sent to and received from but maybe 50 show up in my collected address list. I want to export my emails contacts but I can't find the majority of those names and addresses.
    Thanks

    http://kb.mozillazine.org/Sharing_address_books
    read section 'Share the OSX System's Address Book'
    Do you have 'File' > 'Use Mac OS X Address Book' selected?
    This might explain where the other email addresses/contacts are available.
    More possible help:
    https://getsatisfaction.com/mozilla_messaging/topics/thunderbird_cannot_seem_to_find_the_mac_os_x_address_book
    quote
    Richard 1 year ago
    Did you see my answer posted earlier in this string? "Apparently at the latest Thunderbird upgrade, the Mac OS reset a security preference. Found under System Preferences/Security & Privacy is a check box to Allow Thunderbird to access CONTACTS. Now all my Mac Address Book contacts are visible." This worked for me, and I am able to update CONTACTS, and see them in Thunderbird. I think I had to restart for this to take effect.

  • QT Pro 7.6 image sequencing aperture exports - only reads first file

    I'm exporting versions (jpg) of files that are originally Nikon raw (NEF) format.
    I'm testing with a bunch of images that were grabbed using the camera's continuous mode - want to make sure the system works before doing any real playing with time lapse.
    I have a folder with the images - all named image01.jpg, image02.jpg etc etc. No other files in the folder.
    Open QT Pro 7.6 - choose Open Image Sequence and select the first image.
    It asks for the frames per second.
    Whatever i pick - it creates a single frame movie with the first image in the set.
    I've tested with two different exports - same issue.
    Any hints?

    OK - tried this.
    For a short test - I have 22 files.
    -rw-r--r-- 1 chris staff 4428188 May 1 23:58 1.jpg
    -rw-r--r-- 1 chris staff 4634772 May 1 23:58 2.jpg
    -rw-r--r-- 1 chris staff 4451476 May 1 23:58 3.jpg
    -rw-r--r-- 1 chris staff 4564699 May 1 23:59 4.jpg
    -rw-r--r-- 1 chris staff 4450224 May 1 23:59 5.jpg
    -rw-r--r-- 1 chris staff 4344569 May 1 23:59 6.jpg
    -rw-r--r-- 1 chris staff 4637089 May 1 23:59 7.jpg
    -rw-r--r-- 1 chris staff 4143277 May 1 23:59 8.jpg
    -rw-r--r-- 1 chris staff 4144009 May 2 00:00 9.jpg
    -rw-r--r-- 1 chris staff 4311011 May 2 00:00 10.jpg
    -rw-r--r-- 1 chris staff 4054440 May 2 00:01 11.jpg
    -rw-r--r-- 1 chris staff 4020426 May 2 00:01 12.jpg
    -rw-r--r-- 1 chris staff 4382219 May 2 00:01 13.jpg
    -rw-r--r-- 1 chris staff 4315001 May 2 00:02 14.jpg
    -rw-r--r-- 1 chris staff 4084161 May 2 00:02 15.jpg
    -rw-r--r-- 1 chris staff 3772054 May 2 00:02 16.jpg
    -rw-r--r-- 1 chris staff 3363054 May 2 00:03 17.jpg
    -rw-r--r-- 1 chris staff 3392872 May 2 00:03 18.jpg
    -rw-r--r-- 1 chris staff 2956213 May 2 00:03 19.jpg
    -rw-r--r-- 1 chris staff 3063359 May 2 00:03 20.jpg
    -rw-r--r-- 1 chris staff 2728311 May 2 00:04 21.jpg
    -rw-r--r-- 1 chris staff 2877868 May 2 00:04 22.jpg
    Now - when they were called image01, image02 etc I got a 1sec movie with only the first image.
    Now - with these names - I get a movie of the correct duration (so - for example - 2 frames a sec yields an 11 sec movie) but with only the first shot shown (in other words I get to see the first jpg for 11 secs in the 2/s example.
    The file command tells me that they are "JPEG image data, JFIF standard 1.01"

  • Only showing a fraction of the files in a given folder

    When I open one of the folders under my Folder or Favorites tabs on the left, it only shows me a fraction of the files that are in there.
    And the ones it shows are scattered in off places, like 1/2 way down the page, several will be grouped together.
    It used to work fine.
    Have I set something wrong, or is the program faulty?
    Thanks.
    J.
    P.S. I'm on Tiger on a G-5 Powermac.

    What exact version?

  • Could not save as - The file may be read-only or is already open in another application

    Can anyone think of a reason why if I'm working locally on a CS3 Flash .fla on my C: drive that I would get the error:
    Could not save as: C:\Users\John\Desktop\Project_File\ANNUAL REPORT RELEASE\01-19-11\report_stragegy.fla
    The file may be read-only or is already open in another application. Save using a different name, or close the document and try again.
    I'm running Windows 7 Home Premium 64-bit.
    It happens sporadically. I haven't been able to find a reason why this error pops up when saving some of my .fla files!!
    The files are not set to "read only" when I right click on them and choose 'Properties' in the Windows 7.
    I found some somewhat similar situations with saving errors:
    http://board.flashkit.com/board/showthread.php?t=796857
    http://forums.adobe.com/message/2980090?tstart=0
    http://www.actionscript.org/forums/showthread.php3?t=153738
    Thanks

    Sometimes I can save with a different file name. But sometimes I can't and start a new blank document and cut and paste from the one that won't save to the new untitled document.

  • An attempt to open a pdf file with Photoshop Elements (version 12) resulted in a pop generated by the Photoshop Editor stated "Impossible to execute this operation (opening file) because one of the specified colour is not managed". Is there any mean to ad

    An attempt to open a pdf file with Photoshop Elements (version 12) resulted in a pop generated by the Photoshop Editor stated "Impossible to execute this operation (opening file) because one of the specified colour is not managed". Is there any mean to adapt the file to make its reading possible?
    Did somebody get the same problem?

    It is a high order probability that your SQL's report generator is creating the PDF, not Acrobat (which by design and EULA cannot be used in as/with server).
    That the report generator outputs to an old-old version of PDF bears this out.
    Wiki articles on PDF are very nice for those high level intro summaries.
    To know / understand PDF you purchase and study the ISO Standard for PDF (ISO 32000-1:2008).
    Rather than "PDF validation" you may want to consider addressing the appearent root cause of the problem(s).
    You can change the email2fax application to one that can deal with older PDF versions.
    You can change the report generator to one that can output to the ISO Standard.
    (Perhaps the in-use application can be configured to output to the current version of PDF (i.e., the ISO Standard).
    Be well...

  • I get a dialogue box asking "What should Firefox do with this file" Options open with or save file. My wife selected save file and now it only opens note pad and displays the text of the file to be saved. OK in windows Internet Explorer.

    I get a dialogue box asking "What should Firefox do with this file" Options open with or save file. My wife selected save file and now it only opens note pad and displays the text of the file to be saved. OK in windows Internet Explorer.

    P.S. Site is http://www.coldwatercreek.com

  • I have 2 itunes libraries on my macbook, but can only access one. The itunes library file for the inaccessible library is subdued and won't open. Help?

    When I select "Choose Library" the itunes library file is subdued.  I copied the library file off of Time Machine and put it back in itunes, but it remains subdued.  I'm running OS X 10.6.8 and iTunes 10.4.1. Help?

    I too had this problem and have solved it. After upgrading to iTunes 10.4.1 (Running OS X 10.6.8) I could no longer select library files. Previously, I would launch iTunes with the option key down to trigger the "Choose Library" dialog box. I have three libraries, each of them stored in separate iTunes folder within my user:music folder. I would then double-click on a given folder to open it and then double-click on the library file. After the 10.4.1 upgrade the library files were grayed out (not selectable). The problem was resolved by changing what and how I selected. When the three iTunes folders were displayed I clicked once on a folder to select it (instead of double-clicking to open it) and then clicked the "open" button in the dialog box. This resulted was iTunes launched with the library file contained in that folder.

  • Open powerpoint encrypted files that are read only

    I'm trying to open a powerpoint encrypted file that is read only with keynote version 5.1.1.
    however keep getting the error message it must first be saved un encrypted.
    is there a way to mark the file read only so keynote will open it like powerpoint does

    thanks for the info, but not possible to get the file with the passowrd removed.
    I was hoping keynote would be able to still read it like powerpoint is able to but I guess that feature doesn't exist in keynote.
    Gues will just have to find a pc with powerpoint then.

Maybe you are looking for

  • Receiver Communication Channel

    Hi Expert, Is there a way to add a counter to a receiver file adapter that uses FTP ? Thank you in Advance D

  • Application Deployment from Remote Share

    I have a particularly large application I need to deploy and the source changes reasonably frequently so I don't want to add it to normal distribution points within SCCM. By that, I mean I don't want the entire 6GB to be copied up to the SCCM server,

  • SOA 11g suite configuration issues

    I'm trying to setup SOA Suite 11g TP4 within JDeveloper 11g in my Windows machine. I was following the instructions given at <<http://www.oracle.com/technology/products/ias/bpel/techpreview/soa11g_installation_tp4.pdf>>. I have created the SOA db sch

  • How to check Message Holding Capcity

    Hi All, Can anybody help me How to check message Holding capacity in Adapter engine..? Thanks Dayakar

  • Sapgui 46D - ABAP Objects

    I’m a starter, completely new to SAP ABAP Objects. Just installed the 2 CD’s delivered with the book “ABAP Objects” from Horst Keller and Sascha Krüger. Installed on a stand alone portable Windows XP Pro service pack 2. No other links to SAP or inter