Open files in Flash MX 2004

Hello,
I have Flash MX 2004, but I installed Flash 8 profissional to
play a tests and open files in flash 8 and save in flash 8 version,
now save files to a type Flash MX 2004, I uinstall flash 8 but now
I do not open these files in flash MX 2004. What can I do now???
Thanks

are you sure you saved then again to flash 2004

Similar Messages

Saving and Opening files from Flash Drive Mac to Windows Computer

Hi!
I recently purchased a generic Flash drive (2gb). I am having problems saving things on it. Sometimes when i drag a file to the flash drive icon it doesn't load properly or transfers well. I try opening it and it says: "FILE ERROR
Couldn't open the file. It may be corrupt or a file format that Preview doesn't recognize." Some documents do open well. I also tried opening files on a windows computer and it says it has to be formated. I format it and of course everything deletes.
Does anyone know how to fix this problem?
Thanks

OK. I did.
But here is the problem, it still doesn't save certain file on the flash drive. Most of the files are either jpg.,cwk.,pdf., or mov.
The mov. won't even play. It works fine when i save files from a windows computer, but not when i save from my mac.
I really have no idea why its doing this. I am aware that certain file can't be opened from a mac to a window, but i just don't know why, when i place a file into the flash drive icon and try to re-open it, it says the error message again (On my mac).
Thanks.

Working Color type always CMYK? Issue opening files in flash

I have illustrator CS3. The problem is I create a web document, set to rgb colour, I can view proof colours on monitor to see how it looks as jpeg, thats fine. The issue is when importing an AI file into flash it uses cmyk colours? Why is this? Is illustrator stuck in CMYK mode no matter what for AI Files? I notice in view > proof setup > working cmyk is ALWAYS shown here, whether you tick it or not.
Is there no way to import AI files as rgb for flash web use then?

> Its not an image im importing into flash.
Really?
> The issue is when importing an AI file into flash...
Okay. Perhaps then, in the future, you should be more clear about exactly what it is you're trying to do versus what you've done and what exactly the problem is.
> It changes the colour a lot, to more like cmyk,
So is it
like CMYK or
is it CMYK?
> Obviously not a lot of people importing AI files into flash...
Absolutely correct. Three, maybe four people import AI files into Flash. Since so few people do that, the likelihood of finding one of those very few people would increase significantly if you went to the Flash forum.
> this pointless post
Turned out that way, didn't it?

Opening files from flash using navigateToURL

I am opening a series of slides from my swf using:
var fileUrl:String = "http://place" + locationstring + filename;
var request:URLRequest = new URLRequest (fileUrl);
navigateToURL (request);
This opens up my file fine but it gives the user the option to save or open the file.
Due to the nature of the files - often being replaced and updated, I wish to take away this option so that the document just opens.
Is this the right way to do this, and if so how is it done?
Thanks in advance.

Thanks for reply.
Ah ok thats a shame...Is there another way to open files?
In the most part I will be opening a .ppsx (power point show)
an .exe
and maybe the odd excel and word docs.

An error occurred opening file. Flash can not parse this document".

I working on a keyframe animation for a client. It was working until the recent flash player patch. Now the file is corrupt and not working. I have four back up files on two different hard drives, still no luck. I can't afford to keep recreating files when it should be probably saving in the first place. Is there way to recover the files properly? This devastating I really need some help. Thanks

Do the experiment, take a FLA file, change the extention to zip and open it, you'll see the content.
When a file is damaged, what happens, is missing information that makes up or this information was altered. In an image file, we can see the damage with incorrect color pixels.
A damaged word file has unknown characters and missing characters.
In both cases the files can be opened, the big problem is when the files are compressed, since a small lack of information is reflected in many small gaps.
The repair of compressed files, look for "holes", the lid infrmacion may or may not be correct, but allows them to be open.
Fla files are not encrypted, are compressed files with a certain structure and xml, with construction information.
In my experience, any FLA file will not open, open it worth trying this method

How to open file adobe flash player

how to play adobe flash player file with my mac

Adobe flash content is embedded in something else, like a web page. It is a browser plug-in on your system, and not a standalone player, like DVD player or iTunes. In order to show flash content, you need to download flash from here.

Opening files from flash

I have a flash project which is going to be sent out via CD.
On it they need to be able to open other documents which the flash
movie talks about. For example they need to be able to click a
button and an excel document open up in Excel.
How can I make flash do this? My project is using
ActionScript 3
Thanks
Wheelz

Use FlashJester JStart.
Try a FREE evaluation copy from
http://jstart.flashjester.com
Regards
FlashJester Support Team
e. - [email protected]
w. - www.flashjester.com
"This has been one of the most impressive and thoroughly
pleasant
experiences of customer support I have ever come across -
astounding!"
Director - hedgeapple

Can Flash MX 2004 handle Director files (.dir)

Hi,
Can Flash handle Director movies? I am making a presentation
of my artworks in Flash environment; I have both Flash and Director
movies. I know that I can import all my swf movies into Director
MX2004 to create a standalone projector and play both swf and dir
movies in Director MX 2004. Does the same work if I import dir
files into Flash MX 2004 Pro?
Thanks
Uti

uxk8396 wrote:
> What will be the ideal solution in this case. I do not
have Director MX 2004.
> I have only Macromedia Studio mX 2004 Pro.
Hi Uttam,
If you need Director movies to be integrated with Flash
movies, there is only one
way, use Director. If you don't have Director, then you won't
be able to use the
Director movies. So, either, recreate the Director movies in
Flash (if it's
possible), or better yet, get Director
regards
Dean
Director Lecturer / Consultant
http://www.fbe.unsw.edu.au/learning/director
http://www.multimediacreative.com.au

Saving Flash Professional 8.0 files to flash 6.0 format

Hi,
Can I save the flash 8.0 fla to flash 6.0 fla?, because in
flash professional 8.0 there is only an option to save file in
flash mx 2004 version. What should I do to convert flash 8.0 file
to flash 6.0 version.
Regards,
Farhan

save from 8 to 7 - then open in 7 and save to 6.
--> Adobe Certified Expert (ACE)
--> www.mudbubble.com :: www.keyframer.com
-->
http://flashmx2004.com/forums/index.php?
-->
http://www.macromedia.com/devnet/flash/articles/animation_guide.html
-->
http://groups.google.com/advanced_group_search?q=group:*flash*&hl=en&lr=&ie=UTF-8&oe=UTF-8
Pherhaan wrote:
> Hi,
> Can I save the flash 8.0 fla to flash 6.0 fla?, because
in flash professional
> 8.0 there is only an option to save file in flash mx
2004 version. What should
> I do to convert flash 8.0 file to flash 6.0 version.
>
> Regards,
> Farhan
>

Is there a way to save a specific set of open files?

Hi,
I'm trying to figure out if it's possible to save a specific set of open files in Flash so that when you close the app and then reopen it, you would either see the files that were open when you closed Flash or at least have the option to select it and it woud then open those files in the order that you left them.
Is that an option by any chance?
With all my class files open at one time, I hate having to reload them into the order that makes sense to me every time I launch Flash.
I was looking into the Projects panel which seems like it's in the direction of what I would like but I can't seem to find anwhere that saves open files.
Thanks in advance for any insight into this!
Cole

I don't believe this is possible with Flash - I've used Flash for a long time, and certain learn new things all the time! But Flash only has a "memory" of recently open files, and doesn't automatically open them for you.
But, for class files, you're in luck. There's a 3rd party AS editor, FlashDevelop, that does EXACTLY that. When you launch it, it auto opens the multiple AS files you ahd open from the previous day/session. FlashDevelop is a wonderful tool to use for editing your AS (and is quicker than Flash, and does custom class introspection, where it auto-completes your own class properties & methods, as well as many other developer-friendly features).
http://www.flashdevelop.org
Here is a screen grab of what Flash Develop lloks liek for me when I open it (showing multiple class files opened yesterday, without me having to open them today)

Trouble opening Flash MX 2004 files in CS3

Has anyone encountered any problems trying to open orignal
.fla files created in Flash MX 2004 in the CS3 version? I get an
error stating "unexpected file format".

I tried opening your test file in my version of CS3 and it
shut it down completely - CS3 quit
unexpectedly. Rare for me as I have been using/testing CS3
for months and not seen this issue - i
suspect the file is corrupt in some way but then again it
would open in flash 8 - can you save as
from flash 8 with a new name and upload again?
Chris Georgenes
Animator
http://www.mudbubble.com
http://www.keyframer.com
Adobe Community Expert
*\^^/*
(OO)
<---->
penmyles wrote:
> Since last posting this, I have been talking to tech.
suport, but I still don't
> have a solution.
>
> The MX files can open in Flash 8. But if I save them
from Flash 8 and try to
> open them in Flash CS3, it still doesn't work.
>
> Also, I have been able to open some MX files that were
created as test files
> (however, they were very simple, animation without
actionscript).
>
> Here is a sample of one of the files that I cannot open
in Flash CS3:
>
http://www.pennymyles.com/testfile.fla
> I'm just wondering if it's the file or my
computer/version/installation of
> Flash
>
> Thanks.
>

How can I open an old Flash file?

A tech person and I created a show in Flash in 2004 called Black on Black / 13; I'm not sure which version of Flash we used. It was put up in the Gallery of the website of a group I headed called The Lark Ascending, and sometime between then and now it disappeared off that website. I have about half a dozen Flash files of the show, but they will not play in the current Flash player or open in the current version of Flash, both of which I own.
I have the original jpegs and music and intend to recreate this work in another program and post it on Vimeo, but it would be very helpful and time-saving if I could use the original show as a reference as it is a highly complex work, and without the reference, it will take me a VERY long time to re-create it.
Is there any way to get one of those old files to play? I have older versions of Flash and probably the player from previous Creative Suites? Should I reinstall them and try them? Is it a lost cause?
Thanks for whatever, including the awful truth,
Karla

It sounds important to you, so you should try a few things.
You mention the year 2004; that was when Flash Player 7 was around. Try downloading Flash Player 7 from the archive page http://kb2.adobe.com/cps/142/tn_14266.html
Make sure to uninstall the current version first with the uninstaller linked on that page.

Getting Error in opening a fla file in flash 8

Hi I use flash 8 to edit my projects, recently I got a website related to music downloads and it was built in flash, now when I try to edit the fla file it opens up in flash 8 but I cannot see the library and when I edit it and make some changes in it it saves but it doesnt work like the original one.
any suggestion would be really helpful.
I think it has something to do with older/newer version of flash ?

If it's a flash cs3 fla, then you might have a lot of problem since cs3 has new features that flash8 cant take care of.

How to open flv files in flash

I want to open flv file in flash and edit. I couldnot import flv file in flash. please guide me.

FLV is FLash Video. You will want to use a program such as After Effects or Premiere Pro to edit video, not Flash Professional.

(Need Help) how to clear the recently opened file list on Flash Player 11?

excuse me pals, may i ask how to clear recently opened file list under "File" tab on Flash Player 11 (the standalone player) ? i've tried to browse my registry but i can't find the solution (and i can't find the .mru files containg the list). my OS is Windows 7 32bit, i hope i can find solution here

I found it in the Windows registry under HKCU\Software\Macromedia\FlashPlayer

Open files in Flash MX 2004

Similar Messages

Maybe you are looking for