Open .fmb file
hi every one,
i create one .fmb in my home then i take one copy and i open it in my office but it showing to me error "Oracle Forms Designer has stopped working",about database is diffrent not same.
but i want just open .fmb and i want take some code(trigger) with out running, i can.
thanks......
modi wrote:
hi every one,
i create one .fmb in my home then i take one copy and i open it in my office but it showing to me error "Oracle Forms Designer has stopped working",about database is diffrent not same.
but i want just open .fmb and i want take some code(trigger) with out running, i can.Hi modi,
Your aren't mention your form version and database version also the OS name. Always mention this in your every question in this form forum. and
Before posting on this forum please read
Now come into your problem. Most probably you are using forms version 10g. It's a common problem. After opening the form builder if you didn't connect with any schema and try to open any form, form builder going to close. Try this...
1. Open form builder.
2. Many any connection with the data base.
3. Now try to open your form.
Hope this works..
And Please mark the thread as answered if you got u'r answer with perfect rewards. This will help your to get better response in future.
Similar Messages
-
Forms 10g crashes when i try to open FMB file
Hi, i have forms 10g 10.1.2.3.0 on windows vista business edition. but when i try to open a FMB file with some sintax or any error forms crashes. If FMB file doesn´t have any sintax error open ok.
RegardsHave a look here:
Error compiling a form under Vista
cheers -
Form Builder crashes while saving .fmb file when connected to db
Hi,
I am getting error The instruction at "0x679c352c" referenced memory at "0x0000001c". The memory could not be "read".
Forms version is 6.0.8.11.3 and database version is 10.2.0.3.0
I am doing the following steps:
1) Open .fmb file in forms builder
2) Connecting to database
3) Making some changes in form
4) Compiling (Ctrl+Shift+K) and generating form (Ctrl+t)
5) Saving form <--- Here I am getting the error and form crashes
If I do not connect to database then builder is allowing me to save the file
1) Open .fmb file in forms builder
2) Making some changes in form
3) Saving form (Successful)
I did some exercise just as a guess that may some part of the form is causing this error. I full expanded all components of the form i.e. blocks, canvases, triggers etc.
This exercise produced that 3 program units were giving same error while full expending those. I deleted those 3 program units and re-created them. Now it is not showing me this memory error while full expanding all program units. I can now fully expand my full form.
But I am still getting this error while saving the changes when I am connected to database.
Please help.
Regards,
Edited by: rawat75 on Sep 2, 2011 7:13 PMHi Experts,
We are getting the same issue. Our form builder crashes once we open our custom form
in form builder.
Server shows:-
Forms 6.0 (Forms Runtime) Version 6.0.8.28.0 (Production)
Form Builder shows:-
Forms [32 Bit] Version 6.0.8.11.3 (Production)
How to upgrade the form builder version? -
Hang Form Builder 10.1.2.3 for fmb files more than 2MB at Windows VISTA& 7
Hi
When i open fmb files more than 2MB with Form Builder (10.1.2.3) at Windows 7 form builder Hange and Close.
Please help me if have any configuration or patch for forms builder.
Regards
Adelhi
i think thats the VGA card problem check for compitible Driver.
sarah -
Can not open a fmb file created in W2000 Server in XP
I create some fmb files in windows 2000 server, Developer 2000 Forms 6i & Patch 17, this forms work fine, but when i tried to open in Same release in Windows XP forms shutdown abnormaly with the next message
"Oracle Forms Designer has encountered a problem and needs to close. We are sorry for the inconvenience."
If i create a new in XP too work fine.
I make a test with convert in W2000Server fmb -> fmt then,
In XP convert fmt to fmb... it works but when i try to open shows the same failure.
Thanks.hi..
I dont think that this is a problem with forms, for me the forms created in windows 2000 works fine with my windows xp
regards
Kris -
Cann't open a *.fmb file (with the same version of Form Builder)
Hello everybody,
My Form Builder 6.0 cann't open a *.fmb file, created with the same version, even with the same Form Builder tool.
I worked for long time ago at this module, I saved it many times, I compiled it and it worked very well. But last time it didn't want to work(open). I couldn't open it (FRM-10043: Cannot open file). But the corresponding *.fmx file is working.
Here is some additional information:
When I try to rename or replace this file an Windows "There has been a sharing violation. The source or destination file may be in use" error appear. But that file is not in use and it is not shared. Is this helpfull?
Is there something which can be done?
Thanks in advance,
EugeSure. I did that many times. I checked the volume for the errors. I interrupted any share connection. I tried to change the extension of the file and to change it again to *.fmb(I did this on a copy of that file).
-
With out changing/opening the fmb file and fmx file Can i know the version
Hi all,
I am working with forms in different versions.
I have number of fmx files with few are complied in 5i, few are in 6i and few are complied in 10g.
All are in the same directory.
The problem is because of all are reside in the same directory, i don't know the version of the selected file.With out changing/opening the fmb file and fmx file Can i know the version of the selected fmx file?
Is there any possiblity to get the version of fmx file with java code?
Advance thnaks
MadhavaHai prasath..
as i said we will not change fmb/fmx file directly.
Is there any chance to write a small java code and get the version.
adv thanks
Madhava -
10g Forms Builder with error "cannot attach library" opening R12 fmb file
Hi all,
I had set up my Forms Builder with all the necessary PLL and FMB files for developing R12 custom forms. I have used the builder to do few custom PLLs and one custom form, and I did not have any problem opening seeded Oracle Forms. Today when I need to enhance that custom form I did 2 weeks ago and I opened Forms Builder, I got the error "Cannot attach library.." for APPCORE, APPDAYPK, etc.. Same error for opening TEMPLATE.fmb.
I have done these to troubleshoot:
1) I verified my Windows XP registry "FORMS_PATH" to include the folder where I store all the PLLs and FMBs.
2) I updated default.env to include that file path.
3) I create shortcut to Forms Builder and put folder path with PLLs under the "Start in" field of the shortcut.
4) I rebooted my machine after changing the registry
5) I moved the folder with PLLs to under C:; I seperate PLL to "resource" sub-folder and FMB to forms/US/ sub-folder just like the server structure.
6) I install one more copy of Developer 10G Suite and set up the registry.
None of these work and the key is it used to work with no issue. Any suggestions what may be the problems?
Thanks!
Mike.Turned out I reloaded all the $AU_TOP forms and PLLs to my desktop and it worked fine. I think I did not FTP correctly the first time.
-
How to open All *.fmb files at one shot in Form Builder
I have 20 *.fmb files i need to open all at one shot in form builder ......Please tell me how to do that
Edited by: user10365515 on May 1, 2010 4:05 AMSo, just go to that directory select that 20 files and double click or hit enter it will open in one form builder session.
Note: You can not open from Form Builder. -
After the report files were moved to the directory under root in Linux, I can not open the file(.rdf) in my working directory in linux even though it doesn't work in the report builder in window.(it used to work fine)
error message the following;
rep-0110:unable to open file 'c:\documents and settings\myhome\desktop\invoice10.rdf
rep-1070:error while opening or saving a documents
can you tell me what it is the solution for that?
Message was edited by:
JinI think I have to recompile the files again.
I found the following solution but i do not know where do i write this script(Dos) and how to run it.
can you tell me more detail?
For Windows
Forms/Reports 6i
REM WINDOWS COMPILE FORMS
::compile_forms.bat
cls
Echo compiling Forms....
for %%f IN (*.fmb) do ifcmp60 userid=scott/tiger@v817 module=%%f batch=yes
module_type=form compile_all=yes window_state=minimize
ECHO FINISHED COMPILING
REM WINDOWS COMPILE REPORT
::compile_report.bat
cls
Echo compiling Report .....
for %%f IN (*.rdf) do RWCON60 userid=scott/tiger@v817 batch=yes source=%%f
stype=rdffile DTYPE=REPFILE OVERWRITE=yes logfile=log.txt
ECHO FINISHED COMPILINGMessage was edited by:
Jin
Message was edited by:
Jin
Message was edited by:
Jin -
Cannot open library files(.pll) in 10G
Hi,
When I try to open or create a library file in 10g I get PDE-PLI018 Could not find library error. I can open or create fmb file though.
I could not create or open in Forms 10 g. 9.04 and again in Forms 10g 10.1.2 version. Operating System XP.
Edited FORMS_PATH by adding the location of .pll files.
Edited default.env varible adding the location of .pll files.
Modified environment variable to C:\Temp for Temp and Tmp both.
Modified Report_tmp in the registry to c:\temp
Modified Forms_Path in the registry added the location of the plls and fmbs.
Also get the following error when I try to save the forcefully created .pll file twice
Rebooted the pc.
Oracle Forms Designer has encountered a problem and needs to close. We are sorry for the inconvenience......
Can anybody help??You said that the error was:
"Oracle Forms Designer has encountered a problem..."
Are you in the Oracle Forms Builder or Oracle Designer when this error occurs?
There are several possibilities. Here are a few:
1. You are trying to read/write the pll to a network share. Ensure that you the files are stored locally.
2. For the Builder (design time), the FORMS_PATH must be set in the Registry or in a batch file if you use one to start the Builder. The total length of all entries in FORMS_PATH should not exceed 1024 (recommended, however that it remains under 512)
For runtime (in a browser), the same setting and rules apply expect the entry is made in default.env
3. If you have more than one version of the Builder installed on the machine, ensure that the system PATH reflects the version you are using as first in the list.
4. The installation may have been corrupted.
5. Be aware that the correct environment variable for 9.0.4 is FORMS90_PATH and the correct variable for 10.1.2. is FORMS_PATH
6. Once opened and re-saved in 10.1.2, you will not be able to open in an older version. -
Problem opeing FMB file when not connected to db
Hi,
I am using Forms 6.0i and I have a problem
when opening an existing fmb file.
If I man not connected to the database before
I try tp open the fmb file Forms just "hangs"
forever.
If I connect to the database first it opens just fine.
Anyone have any idea what might be the problem ?
Thanks in advance.
Regards,
Klas MalmstromCan you tell me the full version number of Forms you are usingForms [32 Bit] Version 6.0.8.13.0 (Production)
and also, do you get the same problem when you opena very simple (one button) Form.Forms 6.0
No, a simple form opens just fine.
Regards,
Klas -
How to use template.fmb file within form builder
Hi
I have created forms without using template.fmb file
and deploy them on EBS then they working fine
But when I try to use template.fmb file then it gives an error
following are the steps :
1:open template.fmb file with form builder
2:rename that file with XXXX.fmb
compile that file and deploy XXXX.fmb file in AU_TOP
after that
in putty i m trying to create XXXX.fmx file in same TOP but it gives an error
Forms 10.1 (Form Compiler) Version 10.1.2.3.0 (Production)
Forms 10.1 (Form Compiler): Release - Production
Copyright (c) 1982, 2005, Oracle. All rights reserved.
Oracle Database 11g Enterprise Edition Release 11.1.0.7.0 - Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
PL/SQL Version 10.1.0.5.0 (Production)
Oracle Procedure Builder V10.1.2.3.0 - Production
Oracle Virtual Graphics System Version 10.1.2.0.0 (Production)
Oracle Multimedia Version 10.1.2.0.2 (Production)
Oracle Tools Integration Version 10.1.2.0.2 (Production)
Oracle Tools Common Area Version 10.1.2.0.2
Oracle CORE 10.1.0.5.0 Production
Compiling package specification APP_CUSTOM...
No compilation errors.
Compiling package specification APP_CUSTOM...
No compilation errors.
Compiling package body APP_CUSTOM...
Compilation error on package body APP_CUSTOM:
PL/SQL ERROR 302 at line 22, column 19
component 'DISABLED' must be declared
PL/SQL ERROR 0 at line 22, column 5
Statement ignored
PL/SQL ERROR 201 at line 40, column 5
identifier 'APP_WINDOW.CLOSE_FIRST_WINDOW' must be declared
PL/SQL ERROR 0 at line 40, column 5
Statement ignored
Compilation errors have occurred.
Form not createdfollowing is command
$ frmcmp_batch module=$AU_TOP/forms/US/XXXX.fmb userid=APPS/apps output_file=$AU_TOP/forms/US/XXXX.fmx module_type=form batch=NO compile_all=specialfor you question - EBS General Discussion General EBS Discussion
Compiling Forms In R12
and search on forum -
We have a strange case with big FMB file (approximately 3 MB).
When i open the file in Forms Builder and store it in other directory the file change it size approximately to 2.5 MB.
After compilation and resaving the file it returns to original size - 3 MB.
Our programmer told me that sometimes he lose some triggers from the FMB while storing the file to other directory.
What can be a problem?
P.S. We are talking about v. 6i of Forms Builder.
Thanks!The varying size of your form is nothing to be concerned of. see:
FMB size shrinks dramatically
Our programmer told me that sometimes he lose some triggers from the FMB while storing the file to other directory.Are those referenced triggers? Did you/he investigate a little? It's a little bit hard to diagnose a problem when the only information you have is that it exists (you know what? My database sometimes throws a no_data_found. Do you know why?) makes the solution to the problem more like a quiz show then a investigation...
cheers -
Forms 10g (couldn't open .mnu file)
Hi all. Installed Forms 10g. Opened my previous fmb file, converted it to 10g. Then I start "OC4J Instance" and run my Forms program. It opens Internet explorer and gives this error
FRM-10221: Cann't read file **.mnu
Why?
Thank you very muchYou will probably be better off asking in the Forms forum which you will find Forms.
Cheers, APC
Maybe you are looking for
-
A utility like Unix 'file' in Java?
Does any one know of a utility like the standard Unix utility 'file' that is written in Java? 'file' does more than look at filename extensions. It maintains a list of rules for identifying many file types based on their contents. Thanks, bw
-
I had to reset my IPhone device to the factory setting, but when I wanted to start using the IPhone, it requires the original Apple ID which I do not recall the password. I tried to reset the password by receiving it through my Yahoo account (Apple I
-
its slow...it frezzes alot and theres never SERVICE..the bars is always LOW!!!!! fix this quick
-
How to modify the standard script in scripts?
how to modify the standard script in scripts?
-
Hi I need to setup ChaRM for a 2 tier landscape. I know how to do the technical side however i need some clarity in regards to the process flow that will be used. Does someone have a diagram or document detailing this process. Basically i just need t