Open HMRC form

On HMRC website I tried to open a tax form. It stated that I needed the latest version. I followed the HMRC link and downloaded the latest which said was successful. I still can't open the HMRC form. Why?

Midlandrunner what are you being requested to have the latest version of? Which Adobe software or service is your inquiry in relation too?

Similar Messages

HMRC forms are in excel format, what do I need to open them ?

HMRC forms are in excel format, what do I need to open them ?

I am referring to the Gift Aid forms which are offered for excel users in one format and LibraOffice also. I am aware the general forms are in PDF but I require the interactive forms which I can fill in on line

Error while opening a form after R12 install

Hi,
I have installed EBS R12.0.4 on linux. The install is successful and i am able to login. But when I am trying to open a forms session I am getting an error "Unknown plugin (application/x-java-applet;jpi-version=1.5.0_13)". I am using Mozilla Firefox 3 beat 5. The browser is unable to find the java plugin required to open a forms based session.
Can anyone let me know the reason & provide the steps to install the required plugin?
Thanks,
Amit

Hi Amit,
You need to have a valid entry in the hosts file (under %Windows%\system32\drivers\etc directory) as follows:
<IP Address> <hostname.domainname>
IP Address: is the IP Address of the machine where Oracle Apps is installed
hostname.domainname: is the hostname and the domaninname where Oracle Apps is installed
From IE, add the application URL to the trusted sites list and access the login page from the following URL:
http://<hostname>.<domainname>:<port>/OA_HTML/AppsLogin
To access the application from Firefox, install the missing plugin from the following URL, then you should be able to access the application using the URL posted above.
http://<hostname>:<port>/OA_HTML/oaj2se.exe
If you have Metalink access, please refer to the note referenced in my previous reply for more details.
Regards,
Hussein

TNS Listener error while opening a Form !

Hi all,
I have installed Form/Reports 11gr2 with Weblogic 10.3.6 64-bit & database 11gr2.
All installations and configures are successful.
But when I give URL address (servername:portno/forms/frmservlet?form=main) to open a form, it gives me following error;
ora-12514: TNS:listener does not currently know of service requested in connect descriptor.
I searched on google, but didn't clear my error. I also checked Oracle services, all are started.
So please guide me !
Thanks/Regards.
Dass

I never changed settings in tnsnames.ora, it is always as per default settings. If required now then let me know.
Please note that when I connect my form builder with databases, it is connected. But when I run my form it again show same error and open a dialog box for
username,password & databases connection string.
I copied this file into "E:\Oracle\Middleware\asinst_1\config" of form.
Below is my tnsnames.ora file;
# tnsnames.ora Network Configuration File: E:\app\admin\product\11.2.0\dbhome_1\network\admin\tnsnames.ora
# Generated by Oracle configuration tools.
ORACLR_CONNECTION_DATA =
(DESCRIPTION =
    (ADDRESS_LIST =
      (ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1521))
    (CONNECT_DATA =
      (SID = CLRExtProc)
      (PRESENTATION = RO)
ORCL =
(DESCRIPTION =
    (ADDRESS = (PROTOCOL = TCP)(HOST = localhost)(PORT = 1521))
    (CONNECT_DATA =
      (SERVER = DEDICATED)
      (SERVICE_NAME = orcl)
Thanks.

Error when opening Data Form

Hi All,
Also I have tried by removing access for that user and opened the Dta Form but still it throwing me the same error:
You are trying to open the data form, but cannot because all of the required dimensions are not present. Possible causes may be that you do not have access to at least one member of a required dimension, or the member selection resulted in no members present. Contact your administrator
Kindly guide me.
Thanks and Regards
ChiDam

duplicate post - Error while opening Data form
Cheers
John
http://john-goodwin.blogspot.com/

Error when opening the form

Hi everyone,
While opening a form in one of the Oracle Retail applications the error:
FRM:41067-Cannot find Menu Item:Invalid ID
is thrown. However when we click OK, the error goes off and system lets us to continue with using the form.
On another form, the following 3 errors are thrown as soon as we open it:
FRM:41091-Cannot find LOV:Invalid ID
FRM:41828-LOV does not exist
FRM:40738-Argument 1 to builtin SET_LOV_COLUMN_PROPERTY cannot be null.
Again this error goes off once we click OK.
This error is not happening on the base application and is happening only on the customer environment. I checked Oracle Retail specific tables but everything looks fine. Is there any environment specific parameters that could cause this error? Please advice.
Regards,
Preeti.

Preeti,
The only thing I can think of is that your customer does not have the correct version of the Form that is giving the error. Have your customer bring up the Forms Information screen (sorry, I don't recall the key stroke for this) and have them scroll to the Version section. Then compare this with your form that works. I am guessing that the versions are not the same.
If they are the same, then you might be dealing with a setup issue. You might want to ask your question in the General EBS Discussion forum. I thought Oracle had a forum for their Retail product, but I couldn't find it. This forum would be the next best.
Sorry I couldn't be more helpful.
Craig...

Error When Opening Any Form

Hi All.,
Im facing some issue while opening any form..its stuck in below mention file while opening any form i tried all the ways still im not able to fix the issue.
Application:11.5.10.2
OS-----------HP-UX
DB-----------10.2.0.4.0
File Name:
oracle/forms/ui/FLWTextArea
Work Around
Relink the all the files
Regenerated the jar files
Regenerated the forms
f60gen help=y
Forms 6.0 (Form Compiler) Version 6.0.8.28.0 (Production)
Forms 6.0 (Form Compiler): Release - Production
(c) Copyright 1999 Oracle Corporation. All rights reserved.
PL/SQL Version 8.0.6.3.0 (Production)
Oracle Procedure Builder V6.0.8.21.0 Build #0 - Production
Oracle Virtual Graphics System Version 6.0.5.39.0 (Production)
Oracle Multimedia Version 6.0.8.25.0 (Production)
Oracle Tools Integration Version 6.0.8.17.0 (Production)
Oracle Tools Common Area Version 6.0.5.32.0
Oracle CORE Version 4.0.6.0.0 - Production
Metalink Doc id
java.lang.NoClassDefFoundError: oracle/forms/ui/FLWTextArea Error When Opening Any Form [ID 1219663.1]

Thanks,
From the below doc id we are currently in patch set 19 but im not able see that in ad_bugs.,
Note: 232313.1 - Information on Previous Versions of Developer 6i Patchsets
https://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=232313.1
Here is an example:
If you have Forms: 6.0.8.27.x --> You are on Developer 6i Patch 18
If you have Forms: 6.0.8.26.x --> You are on Developer 6i Patch 17
If you have Forms: 6.0.8.25.x --> You are on Developer 6i Patch 16
If you have Forms: 6.0.8.24.x --> You are on Developer 6i Patch 15
SQL> select bug_number from ad_bugs where bug_number='&BUG_NUMBER';
Enter value for bug_number: 9935935
old 1: select bug_number from ad_bugs where bug_number='&BUG_NUMBER'
new 1: select bug_number from ad_bugs where bug_number='9935935'
no rows selected
SQL>

Unable to open Livecycle forms even with latest plug-ins

Hi guys,
I have a created a few dynamic forms designed using livecycle designer ES..In order for my users to open these forms, they need to have atleast Adobe acrobat / reader version 8.1 or higher to view these dynamic files. However, quite a few of my users are saying that they are still unable to open these forms directly from their browser although they have downloaded the latest Acrobat X version and the browser plug-ins in their computer. It happens to both windows and mac computers. But they are able to download these files and open it directly from their adobe reader though. It happens with all browsers for them...some of them have even called up mac support as well as adobe support and they were advised that it could be a problem with my forms that I find hard to believe since it opens in my computer and opens for a lot of other users. Its only a few users still having difficulties and I can't understand why!
Also, I recently uploaded a dynamic file in acrobat file sharing. Why am I getting the below message when I have the latest adobe installed? I am able to open other dynamic forms in my browsers..why does this happen? I wonder if other user's problem is similar to this...not sure...
To view the full contents of this document, you need a later version of the PDF viewer. You can upgrade to the latest version of Adobe Reader from etc...etc...etc..
What can be the problem when the adobe version is already updated and also the plug-ins are updated too?? I have read a lot of links in adobe site itself which suggest various methods to test out the forms, browsers, plug-ins, etc..but this problem still happens to some users even after trying out these troubleshoots. Can someone explain if there are other limitations or solution for these users?

I don't have an answer. However, since your question is not about Acrobat forms, but Designer forms, you need to ask in the LiveCycle forum that deals with Desginer forms.

I have created a form in InDesign, exported to a pdf, created an editable form and saved. When I open the form and make changes and save, the reopen the changes are there. If try to email this form as an attachment after editing, the attachment is alway

I have created a form in InDesign, exported to a pdf, then created an editable form and saved. When I open the form and make changes and save, then reopen the changes are there. If try to email this form as an attachment after editing, the attachment is always minus the edits. ????

Hi chuck,
If you ave created the form and then filling it yourself and saving the form, the filled data should be there when you reopen the same form.
Can you please send the form to me at [email protected] so that I can have a look.
Regards,
Rave

Time to open Web forms too long for the first connexion !!

Hi
When we first open a web form in the day, the time to open it, is greater than 10 minuts ( the CPU time used to retrieve the webform is measured at about 20 seconds)
When we do open the webform a second time it takes about 20 seconds to open it!!
Have someone meet this case?
What do we have to change in order to enhance the openning duration of the webforms?
Thanks
environment:
Serveur IBM, OS Windows 2003 server
Hyperion planning 11.1.1
Edited by: RYAG on 26 avr. 2010 14:56

Does it take 10 minutes to open on the server, if it takes 10 minutes on the server and only 20 seconds of that is CPU processing then are you saying for over 9 minutes it is rendering the form in your browser, you can check the browser process on the machine.
If you do want to check or increase the maximum heap size then have a read of :- Re: Heap sizes with Planning11.1.1.3 & Weblogic help
I would also check how much memory the JVM is using when opening the form, you can check using task manager on the server or better still use something like process explorer.
Cheers
John
http://john-goodwin.blogspot.com/

OPEN_FORM Built-In Call from Menu Doesn't Open the Form

I am attempting to open a form from the menu, using the following PL/SQL code:
OPEN_FORM('CODES_MAINT', ACTIVATE, SESSION);
The forms compile, as does the menu. When the code is invoked, it is as if nothing happens. No error is thrown, but the form does not open.
Is there a property value I am missing somewhere?

1. Yes you must recompile the windows developed fmb using the linux forms compiler on the linux box.
2. Make sure the form names are the right case. We always name our forms all lower case in our code and in the unix directory where they reside. Remember, linux filenames are case sensitive. Windows filenames are not case sensitive.

How to make a link in a report open a Form in a different region of the same page ?

Hi,
I developped a report and a form for the same table. I also created a link and used it in my report so that when I click on the link of one record, the form is opened and display this record.
My problem is that when I include my report as a portlet and I click on a link, the form is opened in full screen mode by replacing the page containing my report.
What should I do in order to open this form in another region of the same page ?
Thanks a lot

I presume that the two regions are working fine with their individual buttons and your issue is how to make them both save with one button.
Here is how
a. You will have 2 ApplyMRU and 1 ApplyMRD processes for each of the regions. Right? Lets say you have 2 "Save" (i.e. label=Save) buttons, one has name SUBMIT and the other SAVE ( SUBMIT and SAVE being the requests that will be sent when they are clicked , respectively)
b. Make the Display condition on one of the buttons 'Never'. Now it won't show when you run the page. Lets say you made SAVE's conditional Display 'Never'
c. Go and change the condition on all ApplyMRU and ApplyMRD processes from "When Button Pressed" to "Request is contains in Expression1". In Expression1 enter SUBMIT,SAVERegards

Opening a form in a POP UP window from report

I would like to open a form in a new window from a
link on a field in the report .
Parameters should be passed from the report to form.
Is it possible to do this with a portal link?
Also After modification of the form & on click of save is it possible to close the newly opened window(form) & refresh the report to reflect the changes as both refer to the same table.
Any Idea pls reply,
Thanks in Adv,
Sajith.

Hi,
You can achieve this using by sql based reports. Here is a sample code snippet
select ''||
to_char(empno)||'' empno
from SCOTT.EMP
Please dont forget to change the display type of the column to HTML in the column formatting section of the reports,
otherwise the report will render the html code.
You can have a close button on the form on which you can write a javascript which closes itself. You can write this
on OnClick
self.close();
Hope this clarifies you doubt :-)
Thanks,
Sharmila

On my Mac, when I attempt to open a form from a web site, the Reader does not open. It used to.

On my Mac os 10.6.8, when I attempt to open a form from a web site, the Reader (10.1.2) does not automatically open as it used to. What can I do to correct this problem?

It sounds like your file associations are messed up and Reader is trying to open your .jpg files. Is this correct?
If so, you just need to change the associations to choose what application opens them. Here's how: Change File Associations in Mac OS X

How to open new form with set value

I have two forms CLIENT and ORDERS who are connected by "client_id" in a one to many relationship [one client can have many orders]. What code to I put in the button so that that when I click on it from the CLIENT table, it goes to the ORDERS form with just the orders that match that "client_id"? The application is in oracle 9i developer using swing.
Here's what I have so far, code to open the form without the binding
//Open Order Form
FormIcdClientApplicationView frameTarget = new FormOrderApplicationView(getPanelBinding());
frameTarget.setVisible(true);
// Close this window
this.setVisible(false);

Hello,
This is the Forms forum. I am sure you will have more chance to get answer in the JDeveloper forum.
FRancois

Open HMRC form

Similar Messages

Maybe you are looking for