Open Hub Delimoter option

Hi All,
we are using Open Hub service in BI7.
we are transferring the data from BI to another server. when i execute the DTP of open Hub then file will generate and it will post in the application server(T-Code AL11).
in Open Hub we have the two deli motor options.
1) pipe symbol
2)semicolon
but i want to post the file in fixed length format, means without using any delimitor options.
how can i do this, please suggest me...
Thanks
Krishna

You try removing the separator (its not mandatory) in OHD's destination tab and activate your OHD.
But i think it will take the separator automatically based on file type. For ex: semicolon for a csv file.
Edited by: Pravender on Sep 24, 2009 12:01 PM

Similar Messages

Open HUB ( SAP BW ) to SAP HANA through DB Connection data loading , Delete data from table option is not working Please help any one from this forum

Issue:
I have SAP BW system and SAP HANA System
SAP BW to SAP HANA connecting through a DB Connection (named HANA)
Whenever I created any Open Hub as Destination like DB Table with the help of DB Connection, table will be created at HANA Schema level ( L_F50800_D )
Executed the Open Hub service without checking DELETING Data from table option
Data loaded with 16 Records from BW to HANA same
Second time again executed from BW to HANA now 32 records came ( it is going to append )
Executed the Open Hub service with checking DELETING Data from table option
Now am getting short Dump DBIF_RSQL_TABLE_KNOWN getting
If checking in SAP BW system tio SAP BW system it is working fine ..
will this option supports through DB Connection or not ?
Please follow the attachemnet along with this discussion and help me to resolve how ?
From
Santhosh Kumar

Hi Ramanjaneyulu ,
First of all thanks for the reply ,
Here the issue is At OH level ( Definition Level - DESTINATION TAB and FIELD DEFINITION )
in that there is check box i have selected already that is what my issue even though selected also
not performing the deletion from target level .
SAP BW - to SAP HANA via DBC connection
1. first time from BW suppose 16 records - Dtp Executed -loaded up to HANA - 16 same
2. second time again executed from BW - now hana side appaended means 16+16 = 32
3. so that i used to select the check box at OH level like Deleting data from table
4. Now excuted the DTP it throws an Short Dump - DBIF_RSQL_TABLE_KNOWN
Now please tell me how to resolve this ? will this option is applicable for HANA mean to say like , deleting data from table option ...
Thanks
Santhosh Kumar

Open Hub is not working after upgrade

Hi Guys,
I did an SAP BI upgrade from 7.0 to 7.3.
The open hub destination was working fine before the upgrade, I could see the data coming in the file.
After the upgrade, there is no data coming to the file. System says "no data available".
Did anyone encounter this issue before?

Hi,
Did you follow the same? Try to look into this angle.
Deleting Data from the Table
With an extraction to a database table, you can either retain the history of the data or just
store the new data in the table. Choose Delete Data from Table when defining your
destination if you want to overwrite the fields. In this case, the table is completely deleted and
regenerated before each extraction takes place. We recommend that you use this mode if you
do not want to store the history of the data in the table. If you do not select this option, the
system only generates the table once before the first extraction. We recommend that you use
this mode if you want to retain the history of the extracted data.
Note that if changes are made to the properties of the database table (for example, fields are
added), the table is always deleted and regenerated.
Regards,
Suman

Deleting DTP based on Open Hub and Remote Cube

Hi All,
i have created a DTP delta for my Open Hub to load a flat file from a remote cube.
i have done some load test request but it doesn't work (no data in my file .csv), i have created another full DTP with others parameters and it works successfully.
now i want to delete my Delta DTP but the system return me a message like this:
DTP_4IDT4BXV29E1N0MWINKCWO60B cannot be deleted at the moment (see long text)
and in the long text i have:
Message no. RSBK037
Diagnosis
You want to delete a delta DTP that has been successfully used to load requests from the source into the target. If you delete the DTP, you will also delete the information on the source data that was successfully transferred. As a result the source data would be transferred again, if you create a new delta DTP that links the same source with the same target.
System Response
The system terminated the delete operation.
Procedure
You have two options:
1. Delete all the requests loaded with this DTP from the target and then delete the DTP.
2. Do not delete the DTP and continue to load deltas using this DTP.
i tried to see the requests loaded with the delta dtp and i have deleted one but there are another requests that i can't deleted.
i have deleted the delta dtp from my transport request.
how should i do to delete definitivily my delta dtp?
thanks for your help
Bilal

Do not delete entries out of table RSBKREQUEST.
To delete your DTP, you may use program RSBKDTPDELETE. Give the technical id of the DTP as the input parameter.

Open Hub - Infosets as source and 'template fields' button

Hi all,
Two questions re Open Hub on 04s (we are on SP8). I've surfed OSS, help.sap.com and SDN with no luck re answers to these:
- I've defined an infoset as my source of an open hub destination. It appears I must create a transformation, but it generates no proposal, and I'm not sure how/if I can add a virtual object (such as an infoset) as a source in a transformation. It appears that the DTP requires this transformation to be defined. Am I missing something? So far, testing on all other objects has been successful.
- How does one use the button 'Template Fields' when defining fields in an OHD? I expected to see options to insert groups of fields (ex. all fields of an infoobject and its attributes), but I don't see any options available.
Thanks!
Lonnie

Update:
I was able to create the transformation (issue found btw keyboard and chair).
New problem: I am unable to activate my DTP. When choosing the source for my DTP, I get a popup window (as normal) to choose the possible sources, but the infoset is not available for selection. Only the 'pieces' of the infoset (the two DSO's that comprise the infoset), and this doesn't help me because my source is the infoset, not the indivudual tables of it.
Also, I cannot change the extraction mode to FULL. Only delta is available.
Thanks in advance for any help.

Open hub destination issue

Hi,
In our project we have Client Instance (eg: BWPD) and Application server (eg: BWPRD) defined for load balancing.
We have created open hub and assigned destination server BWPD.
When i execute the DTP manually in BWPD, it runs succesfully.
However, the same DTP when placed in the process chain fails with error message :
No Such File or Directory
Could not open file D:\usr\sap\BWPD\A01\work\Material on application server
Error while updating to target ZXXXX.
Options Tried:
Schedule process chain in the background server BWPD (same server which has been mentioned in Open hub dest) still DTP failed.
Tried with Application server it failed.
Tried with HOST as option it failed.
couldn't make out what is going wrong. Any thoughts ?
Regards.

Hi there,
found that doc quite useful.
Maybe could shed some light to your issue.
[Creating Open Hub Destination using a Logical file to extract the data|Creating Open Hub Destination using a Logical file to extract the data]
Also, what OS do you have?
is the Syntax Group accordingly created ?

Open Hub services in BI 7.0

Hi Experts,
I am working on BI 7.0 and have a requirement where i have to extract data from a standard sales cube(0SD_C03).I will be using open hub services,but i also need to send the master data attributes along with this into the application file server.
I did the following steps
1) created an openhub destinationa as a CSV file and selected the fields i needed.(Cube has 80+,but i selected only 10 fields for my file).
2) added an infoobject YINVGP which is an attribute of 0Material
3) The transformations were automatically created by the system.
4) Created a tranformation between 0MATERIAL and its Attribute YINVGP and selected the rule type as "Read Master Data".
5) When i click on transfer values to activate the changes,its giving me the following error.
Rule11(Target/BIC/YINVGP Group:01 Standard group) No master data characterstic selected.
Rule(Target Field:/BIC/YINVGP) No source assigned.
Can the experts confirmif i am missing anything?If so please suggest on how to get the master data using open hub services.
Is this possible with open hub services,if so i would really appreciate anybody can pass me screenshots or step by step procedure,as i have not worked on open hub earlier.
thanks in advance

Hi Naga,
I have seen the link you have sent me.It doesnt really help me.But thanks anyways.I am able to create a CSV file,which is not a problem.But my question is can i get the attributes of 0Material to appear in the same file.SAP has provided an option to read master data in the transformation rules,and when i try to use the rule,its giving me an error saying source has not been assigned.
thanks

Open Hub DTP issue (Error 21 when writing to the local workstation)

Hi,
I am using an openhub destination to output my csv file. Its a local workstation share folder. Data Provider got around 50000 rows (expecting a 40MB file). When ever I execute the DTP, it run for first data package and fell down with below error message.
Error 21 when writing to the local workstation
Error while updating to target XXXXXXX (type Open Hub Destination)
Operation could not be carried out for
Exception CX_RS_FAILED logged
Exception CX_RS_FAILED logged
Sometimes the file get created with partial entries, most of the times the file wont even get created. I created new dtps and tried the same. Changed the package size, servers, parallel processes etc, but of no use.
Thanks Neo

Hi Neo,
Did you try to define the logical/physcal file path from tcode FILE? If not can you try to use this option and see if it works.
Also can you change your DTP settings by reducing the data packet size to see if your facing this error message?
Thanks
Abhishek Shanbhogue

Need help with open hub

Hi eveybody,
I was trying to wok with open hub. Created infospoke, destination i gave was a csv file named d:/openmara.csv path, saved and activated the info spoke. I went to d:/ to view the uploaded files, two file was created, when i try to open a file it says "unable to read" , when i tried to open the second one i could open the file and see some datas but not in a correct format, why is that?
Then i tried to load the data in database, so in the infospoke i selected the option for destination as database,saved and activated the infospoke, now where should i go to see the uploaded datas physically?
Could anyone help me with this.
Thanks,
RR.

Hi,
Thanks for the reply. I created a infospoke and destination was database option. Opened the se16 gave the table name which starts with /bic/....(please correct me if i am wrong),then the initial screen of se16 came up with all the fields , but when i executed it, the table is empty.Could you say why it is happening.
Thanks,
RR.

Problem with open hub with application server

Hello...
I have a problem.
I have bw 7.0 ad im usin Open Hub.
When I configured the open hub in my development environment, In the destination tab i try two options
Option 1.
I use the application server, then i choose my server (the development server).
But when i try to transport I get the follow mistake:
Application sevier sapnwd01 does not exist (sapnwd01 is my development server)
I now I can change the table RSBFILE , or made an abap program.
The problem is, i need to pass the transport withouts errors to quality, because i need to transport to my production server.
And in production server I don't have the permission to change tables.
Option 2.
Using a logical file name (this logical file name, i used for other process and its working correctly)
But when i try to transport I get the follow mistake:
Unpermitted name   for a file .
I hope you can help me!!
Thanks in advance

Hi Sharayu Kumatkar
Sorry for the delay, I had been problems with my access :$
I check the AL11, there are a lot of directories, so I dont know which its the one
My logicla path is ZAPD_INVERSIONES
My phisical path is /netweaver/bw/fuentes/miig/altamira/
My logical path Definition is :
Logical file ZAPD_INVERSIONES2
Physical file ExtraccionInversiones.txt
Data Format ASC
Aplicat. Area FI
Logical Path ZAPD_INVERSIONES
In definition of variable
FILENAME Test.txt
I get this messaje error while Im trying to transport
Start of the after-import method RS_DEST_AFTER_IMPORT for object type(s) DEST (Modo activación)
Unpermitted name   for a file
Thanks to help me!!

Open Hub Destination to Oracle database

Hello All ,
I am supposed to send data from my SAP BI (7.0) system to and Oracle Database using open hub destination. I have to use the option " Third Party " as destination while creating the Open Hub Destination .
From my reading and acc to Basis I realised that I need a 3rd party ETL tool in between BI and Oracle system to write data into the Oracle system since oracle is not SAP RFC aware . The 3rd party ETL that I am supposed to use in this is Business Objects - Data Integrator(BO-DI) . If anyone has implemented this type of Open hub service please throw some light on this issue as to how to setup the 3rd party ETL in between and how to proceed . Any how to document would also be useful .
Thanks and Regards,
Riddhi

Hi,
Pls go thru this links,
http://help.sap.com/saphelp_nw70/helpdata/EN/43/79f902dfb06fc9e10000000a1553f6/frameset.htm
http://help.sap.com/saphelp_nw70/helpdata/EN/43/79f902dfb06fc9e10000000a1553f6/frameset.htm
Hope it helps u,
Thanks & Regards,
SD

Open hub destination to download the output file into R/3

Hi Guys,
             I have a requirement where i need to down load the data from my BW cube to R/3.For this i am using Open hub destination.
While creating the open hub destination we have option called RFC Destination(in that i have selected destination as my R/3 system).When i execute my DTP it is saying the load is successful and it is showing the no.of records transfered.
But i am not able to find where this data is getting transfered From BW cube to R/3 system using open hub.

Hi Friends,
I have one Query on WDJ. Here I have two requirements.
I have done click on u201CExport Excelu201D Button that data was download into Excel file Now my requirement is click on Save Button that file will save into (/exchange/CED) this path of R/3 System.
CED -
>is R/3 System ID
Under System id we can save this file.
Here EP Server and R/3 Servers in Diff Systems.
I was write codeing
InputStream text =      null;
     int temp = 0;
     try
     File file =      new File(wdContext.currentContextElement().getResource().getResourceName().toString());
//       String File = "abc.xls";
//       String file = "anat" + ".xls";
     wdComponentAPI.getMessageManager().reportSuccess("File::"+file);
     FileOutputStream op =      new FileOutputStream(file);
//       FileOutputStream op = new FileOutputStream("D://usr//sap//BPE//"+file);
//       FileOutputStream op = new FileOutputStream("D://KumarDev-BackUp//"+file);
     wdComponentAPI.getMessageManager().reportSuccess("op::"+op);
     if (wdContext.currentContextElement().getResource()!= null)
     text = wdContext.currentContextElement().getResource().read(false);
     while((temp=text.read())!= -1)
     op.write(temp);
     op.flush();
     op.close();
//        path = file.getAbsolutePath();
     path =      "/exchange/CED/"+file;
     wdComponentAPI.getMessageManager().reportSuccess("path:"+path);
     catch(Exception ex)
          wdComponentAPI.getMessageManager().reportSuccess("ex.printStackTrace()");
My Req is that file will saved in this path (path =      "/exchange/CED/"+file; )
Regards
Vijay Kalluri

Open hub Destinations - Third-Party Tools As Destinations

Dear all, below is the SAP Help process flow steps. I am quiet clear of all the steps except the APIs. Where do we define these APIs? When it says "You use API RSB_API_OHS_DEST_SETPARAMS to define the parameters for the third-party tool that are required for the extraction" where do I use it? Is it in the 3rd party tool? or is it in SAP BI.
If it is in 3rd party tool, where in 3rd party tool. Do I need to write as code ? or would I have an option in the 3rd party tool?
If someone can help me with Microsoft connector using Microsoft SQL Server 2008 Integration Services packages to SAP BI that would be helpful.
Where in Microsoft SQL Server 2008 Integration Services packages can I use/put this APIs? Any help Plzz
If it is in SAP BI where in SAP BI do I have to use these APIs? Any help is highly appreciated
Regards,
KK
Process Flow:
Extraction to the third-party tool can be executed as follows:
       1.      You define an open hub destination with Third-Party Tool as the destination type.
       2.      You create an RFC destination for your third-party tool and enter it in the definition of the open hub destination.
       3.      You use API RSB_API_OHS_DEST_SETPARAMS to define the parameters for the third-party tool that are required for the extraction.
       4.      You either start extraction immediately or include it in a process chain. You can also start this process chain from the third-party tool using process chain API RSPC_API_CHAIN_START. The extraction process then writes the data to a database table in the BI system.
       5.      When the extraction process is finished, the system sends a notification to the third-party tool using API RSB_API_OHS_3RDPARTY_NOTIFY.
       6.      The extracted data is read by API RSB_API_OHS_DEST_READ_DATA.
       7.      The status of the extraction is transferred to the monitor by API RSB_API_OHS_REQUEST_SETSTATUS.

It's been a along time since i worked with open hub, but here goes:
The Third Party tool needs parameters or switches to work correctly. Think of the old DOS commanda the "/a" "/b" suffix.
The APIs are simply a way to pass these parameters from the BW source to the Third Party target.
If your tool does not need them, don't worry about them.
John Hawk

Open Hub File ignores comma separator

Hi friends,
I've got a problem while extracting a csv file with an open hub service.
In the system my user (tab default) has US decimal format, and I can see the values in the infocubes correctly.
But when I extract this values thru open hub service to a csv file, the comma separator and decimal point disappear.
I thought it was a problem of the configuration of my pc, so I modified the regional options selecting US format.
But, even doing this, when I open the csv file with excel the comma separator and decimal point doesn't exist.
I know there exist a transaction called something like "RSRVT" or similar that can definy the thousand separator, but I don't remember the exact name.
The field that I'm interested in the open hub file is defined as NUMC, length 17 and 3 decimal. I've tried to define with DEC format or CURR with similar result (totally failed).
Can anybody help me!... this is very urgent.
Thanks a lot.
Francis.

Hi
check out this link too...
http://help.sap.com/saphelp_nw2004s/helpdata/en/8e/dbe92341c84242be2c7d3917f1c197/frameset.htm
Re: Flat file data load
swetha

Access Violation when trying to read from Open Hub in BW

Hi,
Can someone help me out. I use BODS version 14.1.1.210. I have setup the connection to BW source and imported metadata for my OpenHub - no problem.
Then created DTP and processchain to load Open hub data in BW.
Made dataflow in BODS with Open Hub Tables as source and maintained processchain to be executed. When executing BODS job I get the following error:
6800 10580 JOB 17-03-2014 13:10:34 Job <Test_OpenHub> is terminated due to error <170101>.
6800 10580 SYS-170101 17-03-2014 13:10:34 |Session Test_OpenHub|Data flow Test Openhub
6800 10580 SYS-170101 17-03-2014 13:10:34 System Exception <ACCESS_VIOLATION> occurred. Process dump option is off. Process is not dumped.
6800 10580 SYS-170101 17-03-2014 13:10:34 Call stack:
6800 10580 SYS-170101 17-03-2014 13:10:34 (null)
6800 10580 SYS-170101 17-03-2014 13:10:34 Registers:
6800 10580 SYS-170101 17-03-2014 13:10:34 RAX=00000000747E1648 RBX=0000000000209AB8 RCX=0000000000209AB8 RDX=0000000000000160 RSI=000000000231DAC0
6800 10580 SYS-170101 17-03-2014 13:10:34 RDI=0000000008BEBAC0 RBP=0000000000000000 RSP=00000000002099C0 RIP=000000007477730A FLG=0000000000010206
6800 10580 SYS-170101 17-03-2014 13:10:34 R8=0000000000000000 R9=00000000FFFFFFFF R10=0000000000620064 R11=0000000008C93600 R12=000000000033D390
6800 10580 SYS-170101 17-03-2014 13:10:34 R13=0000000081D6FEC0 R14=000000000020A008 R15=000000000020A030
6800 10580 SYS-170101 17-03-2014 13:10:34 Exception code: C0000005 ACCESS_VIOLATION
6800 10580 SYS-170101 17-03-2014 13:10:34 Fault address: 000000007477730A 01:000000000002630A
6800 10580 SYS-170101 17-03-2014 13:10:34 C:\Windows\WinSxS\amd64_microsoft.vc80.crt_1fc8b3b9a1e18e3b_8.0.50727.4940_none_88df89932faf0bf6\MSVCP80.dll
6800 10580 SYS-170101 17-03-2014 13:10:34 ==========================================================
6800 10580 SYS-170101 17-03-2014 13:10:34 Collect the following and send to Customer Support:
6800 10580 SYS-170101 17-03-2014 13:10:34 1. Log files(error_*, monitor_*, trace_*) associated with this failed job.
6800 10580 SYS-170101 17-03-2014 13:10:34 2. Exported ATL file of this failed job.
6800 10580 SYS-170101 17-03-2014 13:10:34 3. DDL statements of tables referenced in this failed job.
6800 10580 SYS-170101 17-03-2014 13:10:34 4. Data to populate the tables referenced in the failed job. If not possible, get the last few rows (or sample of them) when
6800 10580 SYS-170101 17-03-2014 13:10:34 the job failed.
6800 10580 SYS-170101 17-03-2014 13:10:34 5. Core dump, if any, generated from this failed job.
6800 10580 SYS-170101 17-03-2014 13:10:34 ==========================================================
Any good ideas?

Hello Erik,
not sure about it, but did you see this post some hours after yours?
DS 4.1 job aborts with Access Violation
Also, did you check ST22 to see if it generates any dump?
And if you're able to check the BODS log files, it might me helpful. They're located at %LINK_DIR%\log directory. Check the names with the execution of the job.
Hope it helps!
Regards.
Bruna Dupim

Open Hub Delimoter option

Similar Messages

Maybe you are looking for