Open Hub Destination - From BI7 to R/3 error
Hi All ,
I am in the process of transferring infocube data from BI 7.0 to R/3.
I created an open hub destination with third party . Once I execute the DTP , i get an
error message
CREATE DATA : The specified type /BIC/OH**** id no valid data type.
The RFC connection between both the systems is in place .
Please guide me where i am going wrong.
Any help is highly appreciated.
Thanks & Regards,
Anjna Goyal
Hi,
Set the correct parameters in case of other Systesm i.e. external system, see the below articles on Open Hub Destination
Open Hub Destination: Part 1
http://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/business-intelligence/m-o/open%20hub%20destination%3a%20part%201.pdf
Open Hub Destination: Part 2
http://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/business-intelligence/m-o/open%20hub%20destination%3a%20part%202.pdf
Thanks
Reddy
Similar Messages
-
Open Hub Destination - csv files
Hi all,
I nedd to send information through Open Hub Destination from a cube to a File in a server. But the Open Hub Destination is originating 2 csv files instead of 1: one of the files has just the name of the fields that will be in the columns and the other file only the data in the columns.
There is an alternative to generate through Open Hub Destination, only one file, with the headers in the columns?
Can you explain to me how to do it?
There are other options to generate csv files, automaticaly from cubes,and send them to other applications?
Thanks a lot.
Regards.
Elisabete DuarteHi,
To send information from a cube to applicatin server thru OHS,
two files will be formed while using OHS. One which will be saved inthe aplication server and for other u should give the path. For downloadin the file to the applc server, in the destination tab, select applcn server option and transform it
Hopeit helps
Cheers
Raj
Message was edited by:
Raj -
Issue for DTP from DSO to open hub destination
Hello Gurus,
I have a issue for DTP from DSO to open hub destination, long text for error in the monitor is as follows:
" Could not open file
SAPBITFS\tst_bi\bit\BIWork\GENLGR_OneTimeVendr_2 on application server"
" Error while updating to target ZFIGLH03 (type Open Hub Destination) "
for open hub destination, I check the configure for logical file name , which is "
SAPBITFS\tst_bi\bit\BIWork\GENLGR_OneTimeVendr",
I am wondering where that file "
SAPBITFS\tst_bi\bit\BIWork\GENLGR_OneTimeVendr_2" in the error message comes from?
Many thanks,Hi
You do not need to create a file in application server. It will be created automatically.
But if you have defined a logical file name in tcode FILE and used that in OHD and if it is not correct then it will show a conflict. Check this out. -
Erase data from open hub destination data service
Hi,
I'm getting an error trying to delete data from a cube, for which data are extracted using open hub service and loaded into a table.
The error given is the following:
Request updated in 1794 already by 1795 target DTPR_4EEX9CGGXLTU2QIPWUAIEUDZK DTP request (ZRAPPEL)
Message no. RSM077
Diagnosis
One or more DTP requests have already updated the request.
Procedure
Firstly, delete all update requests from your targets. Then you can delete the source request.
Zrappel data is the open hub destination. But it is clear where requests for this destination, to let me delete the cube data.
Thanks.Hi,
Procedure
Firstly, delete all update requests from your targets. Then you can delete the source request.
Follow the same steps above , that means delete the requests from the Cube Zrappel.
right click on the cube -
> Delete Data
now the syatem will promt you asking
Do you want to delete the content of data target Zrapple ?
say yes for it .
hope this will solve your problem
santosh -
Program or Function module to delete data from Open Hub Destination Table
Hi All,
Can anybody suggest me a Program or Function module to delete data from Open Hub Destination Table.
Thanks & Regards,
Vinay KumarYou can simply goto t-code SE14 mention the open hub destination table and Delete data by clicking on "Activate and Adjust database" with radio button "Delete Data".
Regards,
Arminder -
How to export data from ODS through Open hub destination ?
Hello Expert,
I ahve some data in ODS.I want to export that data to some thirdt party application through Open Hub destination .How will I do that ??
Eary reply is appreciated .HD IS :
1.DATASOURCE
2.INFOSOURCE
3.DATASTORE OBJECT
4.INFOCUBE
5.INFOOBJECT
1.Assume that info cube existing with data
2.Create openhuB services
GO FOR OHD---->select Any info area ->CONTEXTMENU>Create OHD
Give the 'OBJECT NAME'----Continue
In OHD Destination type Depends upon 3 types
1.DB-TABLE
2.FILE
3.THIRD PARTY TOOL
3.Go for the Defination Tab give the File name
4.Create Transfermations
5.Create DTP
OPEN HUB SERVICES WITH -
INFOSOURCE:OHD---DB TABLE SPECIFY:/BIC/OH
1.Assume that info cube existing with data
2.Create openhuB services
GO FOR OHD---->select Any info area ->CONTEXTMENU>Create OHD
Give the 'OBJECT NAME'----Continue
3.Select Dbfile----->Continue
Select file location where you want to store file .
O.Semantic key
4.Create Transfermations
5.Create DTP
Regards ,
Praveenyagnamurthy. -
Use of Open Hub Destination to load data into BPC
Hi Gurus,
I want to load the data from SAP BI to BPC (NW version), using Open Hub Destination. I want to know few things about this.
1) What method should I use? Should I use Destination as Flat Files or Database tables? If Database tables, how can I use this data in the tables in BPC?
2) If I go for Flat Files, which is saved in the application server of BI, how can I import those files to BPC and use it using Data Manager?
3) Also, in case of Flat Files, there are two files which are created. One is the control file and other one is the data file. How can I use both of them? Or can I just use data file without header?
Your replies will be much appreciated.
Thanks,
AbhishekHi Anjali,
I can use the standard data manager package from BI to BPC, if the CSV file is available in the BPC Server or in case if I am directly extracting from BW object, InfoObject or InfoCube.
But, since I will be using Open Hub, the output of this can be in a Database Table or a CSV file, preferably in SAP Application Server. In such cases, how can I use the Database table or CSV file in the standard Data Manager Package?
Thanks for your reply.
Abhishek -
Hi,
We want to be able to extract data from a cube and would like to use Open Hub Destination for it. We also want to extract deltas.
The question is ..
Should we be making a single info package for this with delta capability ..
or 2 separate info packages .. 1 for full mode and another for delta mode.
Regards
VandanaHi,
Yes what you said it is write
from which cube do u want to retract the daat that cube will be the source
first create the open hub in RSBO tcode and
in open hub destination select aht and create the transformation between the table( to where u want to export)
then create the DTP between the cube to the table
and directly u can use the delta DTP first all the records will come and later onle delta records will be updated.
Thansk & Regards,
sathish -
Open hub destination with datasource as the source
Hi,
I am trying to use the new features of BI for open hub destination where you can use datasource as the source for extraction.
I have created an infopackage, loaded data to PSA and from there to open hub destination via the DTP.
When I try to execute the DTP, I get the following error:
<b>Datapackage processing terminated.
Error in substep
You are not authorized to use this transformation.</b>
I have been able to use the DTP to load open hub destination targets with datastore and infocubes as source.
Also when we turn on the security trace, it doesn't fail anywhere.
Has anybody faced a similar problem?
Any help appreciated,
Thanks,
Payal.I have created to OHD - one for a 3.5 data source and one for a 7.0 data source (both are different data sources). While creating DTP for the 7.0 data source, it did create a default mapping for transformation.
But I still get same error in both cases.
When I create the DTP, it tries to create a transformation. But I get an information message :
Exception CX_RS_MSG occurred (program: CL_RSBK_PATH==================CP, include: CL_RSBK_PATH==================CM00I, line: 16).
I can still activate the DTP and when I run it says I don't have authorization to this transformation.
I think there are issues while creating the transformation, but I don't know what!
-Payal. -
Open Hub Destination transports
Hi Experts..
We have crated Open Hub destinations to pull data from ODS to DB table in BI 7.0. But while transport the transformations for OHD are failing with transformation becoming inactive with error messageu201D Target ODSO ZODS*** does not exist" But the ODS is present in QA system and is in active version.
So can any one pls help me to know the proper sequence for Open Hub Destination transport and the necessary objects to be captured in the request? Currently I had captured OHD, transformation and DTP in the same request.
<removed by moderator>
Regards,
Umesh.
Edited by: Siegfried Szameitat on Jan 16, 2009 11:57 AMSend the OHD in one request, transformations in one request, then DTP in another request.
When club transformations & DTP together it fails in my experience. -
Error in Transporting Open Hub Destination Objects
Hi Experts,
When i transport the open-hub destination to Quality server from development, the error No Rule Type Exists occurs while activating the transformation.
The objects are transported but transformation & DTPs are inactive.
Please assist as this is for the first time Open-Hubs are being transported in my system.
Any help will be greatly appreciated.
Thanks,
SumitHi,
the return code is 8
I checked and here is error log:-
Start of the after-import method RS_TRFN_AFTER_IMPORT for object type(s) TRFN (Activation Mode)
Activation of Objects with Type Transformation
Checking Objects with Type Transformation
Checking Transformation 08FM6JIPU6MCLHM2LWBY02OT6SXOPDNY
No rule exists
Checking Transformation 09RS1PONVSGIHIJEHRGDCWPP4UD87TBY
No rule exists
Checking Transformation 0MJTLNXZAUI7SKRWPKEFUIOCMB8X5TWQ
No rule exists
Saving Objects with Type Transformation
Thanks,
Sumit -
Dear SCN Experts,
I am currently working on scenario where I have a requirement to push data from SAP BI 7.0 to SAP PI 7.
And I am using Client proxy for SAP BI to send the data from BI tables to SAP PI and then to write to FTP address.
Now the challenge I am facing is the ABAP Proxy how to use it with Process Chain and also I am having Open hub destination created for the same.(Specifically with the new version i.e. 7.0)
Can you atleast make me understand what are the steps involved in this for Client Proxy, Process Chaing, How will proxy trigger and other regarding the same.
I have searched SDN but got the document having older versions in it. Which doesn't serve the purpose.
Regards,
[Gaurav Patwari|http://gauravpatwari.wordpress.com]Hi Michal,
Thanks for the reply buddy.
I know that we can run the scheduled report for the proxy to fetch the report. But the client requirement is to use process chain, Open hub destination which fetches data from the ODS to Ztable created.
We need to fetch that data from the table via our proxy. I am familiar with that report related method.
I have one document using the same method but is using Infospoke(which is now obsolete) so have to OHD and also some of the proxy of XI's older version. So is not helping me out.
Please do the needful. Or can you send me some sample scenario like this with screen shots. It will be a great help.
Regards,
[Gaurav Patwari|http://gauravpatwari.wordpress.com] -
Open Hub Destination to Oracle database
Hello All ,
I am supposed to send data from my SAP BI (7.0) system to and Oracle Database using open hub destination. I have to use the option " Third Party " as destination while creating the Open Hub Destination .
From my reading and acc to Basis I realised that I need a 3rd party ETL tool in between BI and Oracle system to write data into the Oracle system since oracle is not SAP RFC aware . The 3rd party ETL that I am supposed to use in this is Business Objects - Data Integrator(BO-DI) . If anyone has implemented this type of Open hub service please throw some light on this issue as to how to setup the 3rd party ETL in between and how to proceed . Any how to document would also be useful .
Thanks and Regards,
RiddhiHi,
Pls go thru this links,
http://help.sap.com/saphelp_nw70/helpdata/EN/43/79f902dfb06fc9e10000000a1553f6/frameset.htm
http://help.sap.com/saphelp_nw70/helpdata/EN/43/79f902dfb06fc9e10000000a1553f6/frameset.htm
Hope it helps u,
Thanks & Regards,
SD -
Open hub destination to download the output file into R/3
Hi Guys,
I have a requirement where i need to down load the data from my BW cube to R/3.For this i am using Open hub destination.
While creating the open hub destination we have option called RFC Destination(in that i have selected destination as my R/3 system).When i execute my DTP it is saying the load is successful and it is showing the no.of records transfered.
But i am not able to find where this data is getting transfered From BW cube to R/3 system using open hub.Hi Friends,
I have one Query on WDJ. Here I have two requirements.
I have done click on u201CExport Excelu201D Button that data was download into Excel file Now my requirement is click on Save Button that file will save into (/exchange/CED) this path of R/3 System.
CED -
>is R/3 System ID
Under System id we can save this file.
Here EP Server and R/3 Servers in Diff Systems.
I was write codeing
InputStream text = null;
int temp = 0;
try
File file = new File(wdContext.currentContextElement().getResource().getResourceName().toString());
// String File = "abc.xls";
// String file = "anat" + ".xls";
wdComponentAPI.getMessageManager().reportSuccess("File::"+file);
FileOutputStream op = new FileOutputStream(file);
// FileOutputStream op = new FileOutputStream("D://usr//sap//BPE//"+file);
// FileOutputStream op = new FileOutputStream("D://KumarDev-BackUp//"+file);
wdComponentAPI.getMessageManager().reportSuccess("op::"+op);
if (wdContext.currentContextElement().getResource()!= null)
text = wdContext.currentContextElement().getResource().read(false);
while((temp=text.read())!= -1)
op.write(temp);
op.flush();
op.close();
// path = file.getAbsolutePath();
path = "/exchange/CED/"+file;
wdComponentAPI.getMessageManager().reportSuccess("path:"+path);
catch(Exception ex)
wdComponentAPI.getMessageManager().reportSuccess("ex.printStackTrace()");
My Req is that file will saved in this path (path = "/exchange/CED/"+file; )
Regards
Vijay Kalluri -
Data selection in new Open Hub destination Vs Infospoke
In BW 3.5, we can use T code RSBO to create Infospoke, In the selection tab, we can use any infoobject in the source infocube as the data filterfor the infoSpoke, e.g I can set company code as 1002 etc, while in the new BI 7.0, Open Hub Destination, where I can achieve the same by set the filter for a specific infoobject in the source cude?
Edited by: Jianbai on Mar 29, 2010 11:49 PM
Edited by: Jianbai on Mar 29, 2010 11:51 PMFor Open Hub in BI7 we are creating transformation and DTP. The same resrtiction you can give in DTP (activate it after change).
Maybe you are looking for
-
I have not updated my iPhone 3G since 2010 as I do not have a computer and have to use my daughters pc. She plugged in my phone to update through iTunes (which took all night) and in the morning it was completed. We backedup to the icloud but now mu
-
Can't delete messages or move them to personal mbox
Hi All: I sent about 6 messages from my Web Mail account (not .Mac) to an address in Germany, all of which had attachments. The largest attachment was 1 MB. This has never been an issue for me before. The only thing new is that I sent a BCC of each m
-
When i want to change my country in iTunes,it tell me that spend your balance first.how can i do it?
-
White Screen - Troubleshooting not working.. help?
Well, my 4G iPod Touch just recently white screened on me. I was in the middle of using an app, and it froze and turned white. I've tried all the troubleshooting suggestions, but none of them worked. When I tried to connect it to my computer, iTunes
-
I'm analysing the differences between several different images and I would like to select a large area of each (such as with lasso tool) and find the average RGB value of all of the pixels within the selection area made/