Open Hub Destination with Application Server Issue

Hi all,
I have requriment that i need to save my monthly data in application server with the help of OPen Hub Destination.I have created an DSO
on that DSO i have created an Open HUb with application server as target.When i store my every month file in application server that file name should be a per the system date.
So i have Created an LOgical File----ztest_data
Assgined Physical path to Logical File-----/usr/sap/<sysid>........
created an Logical File name------Ztest_data_file....
IN the open HUb i have selected Aplication Server as My target and i have checked the box.
I have selected Logical FIle name and given the file name which i have created-----ztest_data_file...
Runned DTP it is showing no errors,but when i check in AL11 ,in the path which i have given(/usr/sap/<sysyid>........,i couldnt find the file.....
Please check this and let me know...
Thanks In Advance,
Bobby.

Hi,
Please check the link /people/jyothi.velpula/blog/2010/01/20/creating-open-hub-destination-using-a-logical-file-to-extract-the-data .
Also is your DTP full or delta. Try running the DTP as Full.
Hope it helps.
Best Regards,
Kush Kashyap

Similar Messages

Open hub destination with datasource as the source

Hi,
I am trying to use the new features of BI for open hub destination where you can use datasource as the source for extraction.
I have created an infopackage, loaded data to PSA and from there to open hub destination via the DTP.
When I try to execute the DTP, I get the following error:
<b>Datapackage processing terminated.
Error in substep
You are not authorized to use this transformation.</b>
I have been able to use the DTP to load open hub destination targets with datastore and infocubes as source.
Also when we turn on the security trace, it doesn't fail anywhere.
Has anybody faced a similar problem?
Any help appreciated,
Thanks,
Payal.

I have created to OHD - one for a 3.5 data source and one for a 7.0 data source (both are different data sources). While creating DTP for the 7.0 data source, it did create a default mapping for transformation.
But I still get same error in both cases.
When I create the DTP, it tries to create a transformation. But I get an information message :
Exception CX_RS_MSG occurred (program: CL_RSBK_PATH==================CP, include: CL_RSBK_PATH==================CM00I, line: 16).
I can still activate the DTP and when I run it says I don't have authorization to this transformation.
I think there are issues while creating the transformation, but I don't know what!
-Payal.

Open Hub Destination with Flat File - Structure file is not correct

Using the new concept for Open Hub destination (NOT an InfoSpoke).
Output is to a Flat File. Remember that when output is to a flat file 2 files are generated: the output file and a structure file (S_<name of output file>.CSV)
The Output file structure corresponds to the structure defined in the Open Hub destination.
However, the S_ (structure) file does not reflect the proper structure. The S_ file lists all fields sorted in alphabetical order based on the field name, instead of listing all fields in the correct order that they appear in the output file.
I have not found any settings that I can modify for the S_ file. When using InfoSpokes the S_ file is correct and I do not have to do anything.
The issue is that the S_ file cannot be used to describe the output file. This is a problem.
Anyone knows a solution to this issue? The goal is to get the S_ file to reflect the proper structure.
I could not find any Notes on this. Please do not send general help links, this is a specific question.
Thank you all for your support.

Hi,
However, the S_ (structure) file does not reflect the proper structure. The S_ file lists all fields sorted in alphabetical order based on the field name, instead of listing all fields in the correct order that they appear in the output file.
As I know and checked this is not the case. The S_ file has the fields in the order of infospoke object sequence ( and in transformation tab, source structure).
I would suggest you to control it again.
Derya

Open Hub Destination and MDM server

Dear colleagues,
Does anybody have the experience of creating OHD with MDM Tech (for pushing data into MDM server)?
I've got the problem of activation my created OHD.
I have tried to connect to MS SQL Server and Oracle server
I think that i don't understand the prerequisites.
Could please advise me my mistakes? What are the configurations of BW and MDM server?
I would be pleased if you write me to my addres

HI
May be this doc helps you
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/media/uuid/368ed888-0701-0010-aa94-b21cfebe4eee
https://websmp210.sap-ag.de/~sapidp/011000358700001612132004E.pdf
https://www.sdn.sap.com/irj/scn/articles-mdm-all?prtmode=print&startindex=241
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/3065806b-dce5-2a10-1493-c933ac8daca5

Error in Open Hub Destination Transport

Hi All,
I am facing the following problem in transporting the openhub destination.
We have created a Open Hub Destination with following settings.
Destination Type :- 'FILE'
We have ticked the application Server name checkbox.
In the server name we have selected our BI Development Server.
In the type of File Name we have selected 'Logical File Name'. We have maintained the details in AL11 and FILE transactions.
While transporting it to our Quality system, it throws an error saying it does not recognize the server name (which is true, the server name is different in quality system).
Needed your guidance if there is any setting like source system conversion where it would change the name?
Also if you could guide me regarding the best practices to transport the entries we have created in AL11 and FILE it would be realy nice. I did a search on this in SDN and could not find any useful stuff for my case.
Thanks in advance.

Hi,
Your TR is failing, may be because in your target system, application server file system is different.
go to transaction AL11 and check that. If same folder structure is not available, get it created, or go to RSA1 and try changing your infospoke settings to point to the application sever file as in your target system.
You have to point this path to Q server.
~AK

Error in Transporting Open Hub Destination Objects

Hi Experts,
When i transport the open-hub destination to Quality server from development, the error No Rule Type Exists occurs while activating the transformation.
The objects are transported but transformation & DTPs are inactive.
Please assist as this is for the first time Open-Hubs are being transported in my system.
Any help will be greatly appreciated.
Thanks,
Sumit

Hi,
the return code is 8
I checked and here is error log:-
Start of the after-import method RS_TRFN_AFTER_IMPORT for object type(s) TRFN (Activation Mode)
   Activation of Objects with Type Transformation
   Checking Objects with Type Transformation
   Checking Transformation 08FM6JIPU6MCLHM2LWBY02OT6SXOPDNY
   No rule exists
Checking Transformation 09RS1PONVSGIHIJEHRGDCWPP4UD87TBY
   No rule exists
Checking Transformation 0MJTLNXZAUI7SKRWPKEFUIOCMB8X5TWQ
   No rule exists
Saving Objects with Type Transformation
Thanks,
Sumit

Open hub Destinations - Third-Party Tools As Destinations

Dear all, below is the SAP Help process flow steps. I am quiet clear of all the steps except the APIs. Where do we define these APIs? When it says "You use API RSB_API_OHS_DEST_SETPARAMS to define the parameters for the third-party tool that are required for the extraction" where do I use it? Is it in the 3rd party tool? or is it in SAP BI.
If it is in 3rd party tool, where in 3rd party tool. Do I need to write as code ? or would I have an option in the 3rd party tool?
If someone can help me with Microsoft connector using Microsoft SQL Server 2008 Integration Services packages to SAP BI that would be helpful.
Where in Microsoft SQL Server 2008 Integration Services packages can I use/put this APIs? Any help Plzz
If it is in SAP BI where in SAP BI do I have to use these APIs? Any help is highly appreciated
Regards,
KK
Process Flow:
Extraction to the third-party tool can be executed as follows:
       1.      You define an open hub destination with Third-Party Tool as the destination type.
       2.      You create an RFC destination for your third-party tool and enter it in the definition of the open hub destination.
       3.      You use API RSB_API_OHS_DEST_SETPARAMS to define the parameters for the third-party tool that are required for the extraction.
       4.      You either start extraction immediately or include it in a process chain. You can also start this process chain from the third-party tool using process chain API RSPC_API_CHAIN_START. The extraction process then writes the data to a database table in the BI system.
       5.      When the extraction process is finished, the system sends a notification to the third-party tool using API RSB_API_OHS_3RDPARTY_NOTIFY.
       6.      The extracted data is read by API RSB_API_OHS_DEST_READ_DATA.
       7.      The status of the extraction is transferred to the monitor by API RSB_API_OHS_REQUEST_SETSTATUS.

It's been a along time since i worked with open hub, but here goes:
The Third Party tool needs parameters or switches to work correctly. Think of the old DOS commanda the "/a" "/b" suffix.
The APIs are simply a way to pass these parameters from the BW source to the Third Party target.
If your tool does not need them, don't worry about them.
John Hawk

Open Hub Destination over a Datasource as a source

Hi Expert,
I am trying to create Open hub destination over Datasource as a source
it showing me an error "Cannot connect DataSource to an open hub destination".
Can anyone tell me is it possible to create an open hub destination over a datasource
If yes then how?
Thanks and Regards
Lalit Kumar

HI lalit,
Check the below forum for refer they have refer using datasource as source for OHD m nt sure:
Open hub destination with datasource as the source
OHD ISSUE
Thanks,
Deepak
Edited by: Deepak Machal on Dec 15, 2011 11:04 AM

Open Hub Destination-Third Party Tool

dear all,
can any one guide me as to how data(master data in particular) from bw can be transferred to oracle data base using open hub destiantion.is rfc connection between bw and third part tool enough,do we have to maintain the same structure in third party tool before executing DTP and how can this be done??
i am now able to transfer data from bw into a flat file and also to data base (bw) and not aware of the this functionality-third party tool .any light thrown on this area is welcome and points will be awarded ,
thanks ,
sasidhar gunturu

Some light at the end of tunnel for sure...
Extraction to the third-party tool can be executed as follows:
       1.      You define an open hub destination with Third-Party Tool as the destination type.
       2.      You create an RFC destination for your third-party tool and enter it in the definition of the open hub destination.
       3.      You use API RSB_API_OHS_DEST_SETPARAMS to define the parameters for the third-party tool that are required for the extraction.
       4.      You either start extraction immediately or include it in a process chain. You can also start this process chain from the third-party tool using process chain API RSPC_API_CHAIN_START. The extraction process then writes the data to a database table in the BI system.
       5.      When the extraction process is finished, the system sends a notification to the third-party tool via API RSB_API_OHS_3RDPARTY_NOTIFY.
       6.      The extracted data is read by API RSB_API_OHS_DEST_READ_DATA.
       7.      The status of the extraction is transferred to the monitor by API RSB_API_OHS_REQUEST_SETSTATUS.
For more details click below -
http://help.sap.com/saphelp_nw2004s/helpdata/en/43/7a69d9f3897103e10000000a1553f7/content.htm
Hope it Helps
Chetan
@CP..

Open Hub Destination - From BI7 to R/3 error

Hi All ,
I am in the process of transferring infocube data from BI 7.0 to R/3.
I created an open hub destination with third party . Once I execute the DTP , i get an
error message
CREATE DATA : The specified type /BIC/OH**** id no valid data type.
The RFC connection between both the systems is in place .
Please guide me where i am going wrong.
Any help is highly appreciated.
Thanks & Regards,
Anjna Goyal

Hi,
Set the correct parameters in case of other Systesm i.e. external system, see the below articles on Open Hub Destination
Open Hub Destination: Part 1
http://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/business-intelligence/m-o/open%20hub%20destination%3a%20part%201.pdf
Open Hub Destination: Part 2
http://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/business-intelligence/m-o/open%20hub%20destination%3a%20part%202.pdf
Thanks
Reddy

Third Party Tool-Open Hub Destination

dear all,
          can any one guide me as to how data(master data in particular) from bw can be transferred to oracle data base using open hub destiantion.is rfc connection between bw and third part tool enough,do we have to maintain the same structure in third party tool before executing DTP and how can this be done??
          i am now able to transfer data from bw into a flat file and also to data base (bw) and not aware of the this functionality-third party tool .any light thrown on this area is welcome and points will be awarded ,
thanks ,
sasidhar gunturu

Some light at the end of tunnel for sure...
Extraction to the third-party tool can be executed as follows:
       1.      You define an open hub destination with Third-Party Tool as the destination type.
       2.      You create an RFC destination for your third-party tool and enter it in the definition of the open hub destination.
       3.      You use API RSB_API_OHS_DEST_SETPARAMS to define the parameters for the third-party tool that are required for the extraction.
       4.      You either start extraction immediately or include it in a process chain. You can also start this process chain from the third-party tool using process chain API RSPC_API_CHAIN_START. The extraction process then writes the data to a database table in the BI system.
       5.      When the extraction process is finished, the system sends a notification to the third-party tool via API RSB_API_OHS_3RDPARTY_NOTIFY.
       6.      The extracted data is read by API RSB_API_OHS_DEST_READ_DATA.
       7.      The status of the extraction is transferred to the monitor by API RSB_API_OHS_REQUEST_SETSTATUS.
For more details click below -
http://help.sap.com/saphelp_nw2004s/helpdata/en/43/7a69d9f3897103e10000000a1553f7/content.htm
Hope it Helps
Chetan
@CP..

Open Hub Destination and infospoke

Hi,
What is the difference between an Open Hub Destination and an infospoke ?
Thanks,
Satya

Hi,
Infospoke s replaced by Open hub destination with NW2004s release..
might worth taking look...
<http://help.sap.com/saphelp_nw2004s/helpdata/en/43/58e1cdbed430d9e10000000a11466f/content.htm>
<http://help.sap.com/saphelp_nw2004s/helpdata/en/43/79f902dfb06fc9e10000000a1553f6/content.htm>

Open hub destination issue

Hi,
In our project we have Client Instance (eg: BWPD) and Application server (eg: BWPRD) defined for load balancing.
We have created open hub and assigned destination server BWPD.
When i execute the DTP manually in BWPD, it runs succesfully.
However, the same DTP when placed in the process chain fails with error message :
No Such File or Directory
Could not open file D:\usr\sap\BWPD\A01\work\Material on application server
Error while updating to target ZXXXX.
Options Tried:
Schedule process chain in the background server BWPD (same server which has been mentioned in Open hub dest) still DTP failed.
Tried with Application server it failed.
Tried with HOST as option it failed.
couldn't make out what is going wrong. Any thoughts ?
Regards.

Hi there,
found that doc quite useful.
Maybe could shed some light to your issue.
[Creating Open Hub Destination using a Logical file to extract the data|Creating Open Hub Destination using a Logical file to extract the data]
Also, what OS do you have?
is the Syntax Group accordingly created ?

Issue for DTP from DSO to open hub destination

Hello Gurus,
        I have a issue for DTP from DSO to open hub destination, long text for error in the monitor is as follows:
          " Could not open file
SAPBITFS\tst_bi\bit\BIWork\GENLGR_OneTimeVendr_2 on application server"
          " Error while updating to target ZFIGLH03 (type Open Hub Destination)     "
      for open hub destination, I check the configure for logical file name , which is "
SAPBITFS\tst_bi\bit\BIWork\GENLGR_OneTimeVendr",
I am wondering where that file "
SAPBITFS\tst_bi\bit\BIWork\GENLGR_OneTimeVendr_2" in the error message comes from?
Many thanks,

Hi
You do not need to create a file in application server. It will be created automatically.
But if you have defined a logical file name in tcode FILE and used that in OHD and if it is not correct then it will show a conflict. Check this out.

SAP BI 7.0 to SAP PI to FTP and with Open Hub Destination ...Help!!!!

Dear SCN Experts,
I am currently working on scenario where I have a requirement to push data from SAP BI 7.0 to SAP PI 7.
And I am using Client proxy for SAP BI to send the data from BI tables to SAP PI and then to write to FTP address.
Now the challenge I am facing is the ABAP Proxy how to use it with Process Chain and also I am having Open hub destination created for the same.(Specifically with the new version i.e. 7.0)
Can you atleast make me understand what are the steps involved in this for Client Proxy, Process Chaing, How will proxy trigger and other regarding the same.
I have searched SDN but got the document having older versions in it. Which doesn't serve the purpose.
Regards,
[Gaurav Patwari|http://gauravpatwari.wordpress.com]

Hi Michal,
Thanks for the reply buddy.
I know that we can run the scheduled report for the proxy to fetch the report. But the client requirement is to use process chain, Open hub destination which fetches data from the ODS to Ztable created.
We need to fetch that data from the table via our proxy. I am familiar with that report related method.
I have one document using the same method but is using Infospoke(which is now obsolete) so have to OHD and also some of the proxy of XI's older version. So is not helping me out.
Please do the needful. Or can you send me some sample scenario like this with screen shots. It will be a great help.
Regards,
[Gaurav Patwari|http://gauravpatwari.wordpress.com]

Open Hub Destination with Application Server Issue

Similar Messages

Maybe you are looking for