Open Hub Logical File Dynamics
Hi all,
I have a question with respect to the logical file names for open hubs.
Do i have to define a logical file name in tx FILE for each openhub? Or is it possible to have just one logical file name entry which can be used by multiple open hubs? (so the openhub technical name is stored in the filename dynamically) For maintenance purposes this is more handy for me.
Let me know if you have any idea!
Thanks in advance!
Best regards,
F Geldof
Hi Freekm, Ruben,
Yes, to have a different logical file name for each OpenHub is a right way to do it. If you use a single logical file name for all your openhubs, i think it will be possible then only by reading the meta data file (Named as S_<FileName>) which is created along with your openhub file and placed in the same folder. This doesn't a look a good idea to me as having multiple logical names isn't a big task either.
Hope it helped.
Best Regards,
Prashant
Similar Messages
-
Help~open hub destination file is not open error!
Hi all,
I met a problem, i tried several times and all got error messages.
It is about open hub destination, i want to use it to send some files to sever, but when i execute the DTP, i got system dump:
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Runtime Errors DATASET_NOT_OPEN
Except. CX_SY_FILE_OPEN_MODE
Date and Time 26.10.2011 01:18:09
Short text
File "I:\usr\sap\Q26\DVEBMGS11\work\ZSS_O0021.CSV" is not open.
What happened?
Error in the ABAP Application Program
The current ABAP program "CL_RSB_FILE_APPLSRV===========CP" had to
terminated because it has
come across a statement that unfortunately cannot be executed.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
I have two open hub, one is fine ,but the rest one always get this error. Help..........Thanks! I checked my ID and found that i have the role to access this folder.
Then i found that our Q system have two servers, A and B, for open hub i should run my process chain in system B, but i forgot that, so i got error. After i changed to sever B, i re-active my open hub and DTP, then re-fresh the process chain and re-executed it again, the error disappeared. -
Hi All,
How to perform flat file expatriations from BW utilizing the Open Hub Service (Infospoke). Can any one explain me step by step.
Thanks,
KNWe use infospoke to archive the data from the datatarget into a flatfile or a database table.
To create the infospoke select the tools menu -> open hub destination.
Give the technical name and click on create.
In the general tab select the type of the object and the name of the object from which the data is is to archived.In the destination tab select the file or the dbtable to which you want to move the data, and give the destination path.
In the infoobjects tab select the objects you want and the order in which the file is to be generated.
If you want to extract the data selectively ,you can give selections in the selections tab.
Then activate the infospoke . Click on execute .The data will be moved to the destination in specified format -
Hi all,
i want to create a external .csv file by using open hub technology in bi 7.
how can I add a endrecord/control line into the .csv file? can i do this coding in the expert routine?
e.g. a line like
X;<YYYYMMDD>;<Number transfered data sets (without Footer)>;<content>;<sum of values>;Have you tried inserting in transformation of open hub ???
Hope this helps. -
Unable to open old Logic Files???
Are you not able to open older Logic 7 files in Logic Studio now? I tried to open one of my files and my computer crashed. The file is not corrupt I might add. This is crazy. This happened with another file of mine. How do you open these? Can you? If not, thats not good at all. Please help.
Although your song file may not be corrupt, it may be referencing plug-ins or instruments which are not compatible with Logic 8 and/or Leopard which you also seem to have installed.
Can you open these songs still in LP7? If so maybe you could export all tracks as audio files and import and continue in L8, or check the plug-ins and instruments used in your older projects to make sure you don't need updates.
You might also see if there are any crash logs (Utilities -> Console). If so, they might give you a clue as to what might be causing your crashes.
Personally, I've found that on more complex projects, completing first them in LP7 and only going to L8 for new projects has worked best for me. -
Trying to open old logic files.
I have Logic Pro 9.1.6. It works fine. I am trying to open old files and understand I need to save them in Logic 7 first. I have L7 installed on a separate disk with OS10.4.11. When I startup with that disk I can't launch Logic 7 because it does not recognize the usbKey. Any help?
Thanks
Peter ScholesI just downloaded and ran the XSkeyUpdater which successfully fixed the XsKey so I can now launch Logic 7.
Peter Scholes -
I recently upgraded to SNow leopard.
I have logic pro 9
I tried opening older tracks and they won't open due to the version
I made those on logic express 7.
Some of those tracks used intakt and battery 2 which now don't work on 10.6 but did on 10.5
Logic express now wont open and crashes every time i try.
Is there a way of getting around thisProcess: Logic Express [271]
Path: /Applications/Logic Express 7.app/Contents/MacOS/Logic Express
Identifier: com.apple.logic.express
Version: 7.0.1 (7.0.1(840))
Build Info: LogicExpressUpdate-1000000~5
Code Type: PPC (Translated)
Parent Process: launchd [143]
Date/Time: 2010-07-09 13:21:37.856 +0100
OS Version: Mac OS X 10.6.4 (10F569)
Report Version: 6
Interval Since Last Report: 113860 sec
Crashes Since Last Report: 14
Per-App Crashes Since Last Report: 9
Anonymous UUID: 43E2F102-CEC7-47C2-ADA8-3BD31B1E72F4
Exception Type: EXC_CRASH (SIGTRAP)
Exception Codes: 0x0000000000000000, 0x0000000000000000
Crashed Thread: 0 Dispatch queue: com.apple.main-thread
Thread 0 Crashed: Dispatch queue: com.apple.main-thread
0 libSystem.B.dylib 0x802362b2 _pthreadkill + 10
1 libSystem.B.dylib 0x80235b5f pthread_kill + 95
2 com.apple.logic.express 0xb80bfb30 0xb8000000 + 785200
3 com.apple.logic.express 0xb80c0037 0xb8000000 + 786487
4 com.apple.logic.express 0xb80dd8e8 0xb8000000 + 907496
5 com.apple.logic.express 0xb8145397 spinlockwrapper + 1791
6 com.apple.logic.express 0xb801ceb7 0xb8000000 + 118455
Thread 1:
0 libSystem.B.dylib 0x801400fa machmsgtrap + 10
1 libSystem.B.dylib 0x80140867 mach_msg + 68
2 com.apple.logic.express 0xb819440f CallPPCFunctionAtAddressInt + 206231
3 libSystem.B.dylib 0x8016d81d pthreadstart + 345
4 libSystem.B.dylib 0x8016d6a2 thread_start + 34
Thread 0 crashed with X86 Thread State (32-bit):
eax: 0x00000000 ebx: 0x802f8500 ecx: 0xb7fff9ac edx: 0x802362b2
edi: 0xb8211640 esi: 0x00000005 ebp: 0xb7fff9d8 esp: 0xb7fff9ac
ss: 0x0000001f efl: 0x00000286 eip: 0x802362b2 cs: 0x00000007
ds: 0x0000001f es: 0x0000001f fs: 0x00000000 gs: 0x00000037
cr2: 0x802362a8
Binary Images:
0x80000000 - 0x8005bff7 com.apple.framework.IOKit 2.0 (???) <A013B850-6ECB-594A-CBD6-DB156B11871B> /System/Library/Frameworks/IOKit.framework/Versions/A/IOKit
0x8007a000 - 0x800e4fe7 libstdc++.6.dylib 7.9.0 (compatibility 7.0.0) <411D87F4-B7E1-44EB-F201-F8B4F9227213> /usr/lib/libstdc++.6.dylib
0x8013f000 - 0x802e5feb libSystem.B.dylib 125.2.0 (compatibility 1.0.0) <3441F338-2218-6D36-3F95-3A16FBF6713D> /usr/lib/libSystem.B.dylib
0x80366000 - 0x804e0fe3 com.apple.CoreFoundation 6.6.3 (550.29) <00373783-3744-F47D-2191-BEEA658F0C3D> /System/Library/Frameworks/CoreFoundation.framework/Versions/A/CoreFoundation
0x805d8000 - 0x805e6fe7 libz.1.dylib 1.2.3 (compatibility 1.0.0) <3CE8AA79-F077-F1B0-A039-9103A4A02E92> /usr/lib/libz.1.dylib
0x805eb000 - 0x805f7ff7 libkxld.dylib ??? (???) <322A4B52-8305-3081-6B74-813C3A87A56D> /usr/lib/system/libkxld.dylib
0x805fb000 - 0x80641ff7 libauto.dylib ??? (???) <85670A64-3B67-8162-D441-D8E0BE15CA94> /usr/lib/libauto.dylib
0x8064e000 - 0x807d0fe7 libicucore.A.dylib 40.0.0 (compatibility 1.0.0) <2314BD12-0821-75BB-F3BC-98D324CFD30A> /usr/lib/libicucore.A.dylib
0x80832000 - 0x808dffe7 libobjc.A.dylib 227.0.0 (compatibility 1.0.0) <DF8E4CFA-3719-3415-0BF1-E8C5E561C3B1> /usr/lib/libobjc.A.dylib
0x808f3000 - 0x808f6fe7 libmathCommon.A.dylib 315.0.0 (compatibility 1.0.0) <1622A54F-1A98-2CBE-B6A4-2122981A500E> /usr/lib/system/libmathCommon.A.dylib
0x8fe00000 - 0x8fe4162b dyld 132.1 (???) <A4F6ADCC-6448-37B4-ED6C-ABB2CD06F448> /usr/lib/dyld
0xb8000000 - 0xb81defff com.apple.logic.express 7.0.1 (7.0.1(840)) <6437A74D-607F-7339-5F7E-F6B0EF81C25D> /Applications/Logic Express 7.app/Contents/MacOS/Logic Express
0xffff0000 - 0xffff1fff libSystem.B.dylib ??? (???) <3441F338-2218-6D36-3F95-3A16FBF6713D> /usr/lib/libSystem.B.dylib
Translated Code Information:
objc[271]: garbage collection is ON
NO CRASH REPORT
Model: MacPro3,1, BootROM MP31.006C.B05, 8 processors, Quad-Core Intel Xeon, 2.8 GHz, 10 GB, SMC 1.25f4
Graphics: ATI Radeon HD 2600 XT, ATI Radeon HD 2600, PCIe, 256 MB
Memory Module: global_name
AirPort: spairportwireless_card_type_airportextreme (0x14E4, 0x88), Broadcom BCM43xx 1.0 (5.10.91.27)
Bluetooth: Version 2.3.3f8, 2 service, 12 devices, 1 incoming serial ports
Network Service: AirPort, AirPort, en2
PCI Card: pci1095,3132, sppci_raid, Slot-3
PCI Card: ATI Radeon HD 2600, Display, Slot-1
PCI Card: pci-bridge, sppci_pci2pcibridge, Slot-2
PCI Card: pci1033,e7, sppci_ieee1394openhci, Slot-2@2,1,0
PCI Card: pci1033,e0, USB Enhanced Host Controller, Slot-2@2,0,1
PCI Card: pci1033,35, sppci_usbopenhost, Slot-2@2,0,0
Serial ATA Device: ST3320820AS_P, 298.09 GB
Serial ATA Device: Hitachi HDS721010CLA332, 931.51 GB
Parallel ATA Device: OPTIARC DVD RW AD-7170A
USB Device: Hub, 0x05ac (Apple Inc.), 0x911c, 0xfd500000
USB Device: Photosmart C4200 series, 0x03f0 (Hewlett Packard), 0x5c11, 0xfd510000
USB Device: Keyboard Hub, 0x05ac (Apple Inc.), 0x1006, 0xfd530000
USB Device: nanoKEY, 0x0944, 0x010d, 0xfd531000
USB Device: Apple Optical USB Mouse, 0x05ac (Apple Inc.), 0x0304, 0xfd533000
USB Device: Apple Keyboard, 0x05ac (Apple Inc.), 0x0221, 0xfd532000
USB Device: Apple Cinema HD Display, 0x05ac (Apple Inc.), 0x921c, 0xfd520000
USB Device: Express 128, 0x07fd, 0x0001, 0x3d200000
USB Device: Express 128, 0x07fd, 0x0001, 0x3d100000
USB Device: Bluetooth USB Host Controller, 0x05ac (Apple Inc.), 0x8206, 0x5d200000
USB Device: iLok, 0x088e, 0x5036, 0x00300000
FireWire Device: built-in_hub, Up to 800 Mb/sec
FireWire Device: Ensemble, Apogee Electronics, Up to 400 Mb/sec
FireWire Device: unknown_device, Unknown -
Opening v4 Logic files & v1 Reason files and re-linking rewire
Hi There,
I have some old files from 2003 which I need to open in the new versions of Logic and Reason. Everything has opened seamlessly (well done Apple & Propellerheads) but I can't figure out how to re-link the rewire tracks from Logic (sorry it's been a while).
I have Reason Left & Right tracks in the Logic mixer and was hoping to simply change the inputs on those tracks to Reason tracks but can't select Reason from the list of inputs (I can only see all the Logic instruments).
How would I go about doing this?
Any help or pointers in the right direction would be much appreciated.
CheersAbout Logic you need Logic 6 or 7 for open logic v4 song
(also Logic Express 7 can do that)
about reason i suggest to ask tp propellerhads...
I just suppose that you need to export Reason files as Audio...
(this is the way that I use when reason song... I hate rewire on the same computer...)
I prefer using reason as SLAVE with iacbuss Midi Clock!
G -
Opening ".lso" Logic files first created in Logic (Windows edition)
Hi
I've recently bought Logic Pro 8/Logic Studio; having upgraded straight from Logic Pro 6. Prior to Pro 6, I was using Logic for Windows.
During my time with Logic (Windows) I compiled a very large number of parts for various band/orchestral instruments - eg. in B flat, E flat; using the Score Editor. I am a church pastor, with part of my brief a music ministry.
This was not an issue - almost seamlessly I could open the parts first created in Windows; it would convert them into a format for Mac.
Alas - in just-before unsuccessfully trying to open parts in Logic Pro 8, it tells me that I need to open them in a Logic Pro version no more recent than 7.2. However, I no longer seem to have Pro 6 on my machine.
Short of finding someone else with a Mac and loading my old Logic Pro 6 installation files etc onto that machine; and then laboriously loading what is probably 120 tracks; I'm wondering whether this is some sort of shortcut/patch/plug-in that would assist me here.
It seems ludicrous that many years of compiling these parts may suddenly amount to nothing.
*Can someone out there give some pointers forward?
In hope
David
(Brisbane, Australia)hi, david,
i would suggest finding the right combo of logic versions.
v6 should migrate well.
but, i've many old files, done on v5 mac.
these are not having a good time in v8.
i seems that if you've any features used from v5 for example, that aren't in v8, logic will crash.
and this has happened here in the last 24hrs.
if these are midi type files for score printout, best, unfortunately IS to export them as SMF's out of v6 and then import them into v8.
there's little difference in the score in both, any, version.
so you'd best best to re-install v6 and print out from there.
you should be using a new partition for v8, and another for v6.
there's is no upgrade available any longer on the apple site for v7.
sorry,
DR9. -
Omit the Open Hub control file 'S_*' for flat file extracts
Hi Folks,
a quick question is it somehow possible to omit the control file generation for flat file extracts.
We got some unix scripts running that get confused by the S_* files and we where wondering if we can switch the creation of those files off.
Thanks and best regards,
AxelHi,
However, the S_ (structure) file does not reflect the proper structure. The S_ file lists all fields sorted in alphabetical order based on the field name, instead of listing all fields in the correct order that they appear in the output file.
As I know and checked this is not the case. The S_ file has the fields in the order of infospoke object sequence ( and in transformation tab, source structure).
I would suggest you to control it again.
Derya -
How to append lines to an Open Hub File
Hi Colleagues,
I have to write data to an open hub destination file.
Normaly file overwrite mode is used.
But I need to append lines from multiple DTPs to one single file.
So far, Open Hub Destination allows to add multiple DTPs, but how to configure BI, that all lines of every DTP are appanded to the file, and not only the last DTP wins.
Thanks and Regards,
WolfgangNo answer.
-
Colleague can't open my Logic Pro 8 files
Hello out there
I hope you will understand my english.
I got a huge problem - I'm a musician, recording selfwritten songs at home and taking them on an external hard drive to the studio, where a producer does the last changes to it.
I'm working with Logic Pro 8, this colleague also.
Suddenly he can't open my Logic files anymore - But before that it worked for a whole year without ever having a problem!
We both didn't change anything on our system (Mac OS X 10.4.11, Power Mac G5, both of us), also no changes on Logic 8... So why the **** can't he open my files anymore?
I bought a new external hard drive but that wasn't the problem.
It's a pain! We can't go on working on my songs like that.
Please help me!
Thank you very much,
Yasodhara3rd party plugins like VSTs which he hasn't?! yes.
i will try that simple project thing. in a few days I go again to the studio and will see.
yes, the projects that he cannot open are running without any problems on my own mac. just not on his.
i included all assets (I think that means for example effects, EQs,... and stuff? not sure about that word. the dictionary doesn't make the meaning clear), not just the audio files without any modifying.
we already tried that open logic first thing and then opening the file with the "Open..." button. still freezes afterwards.
how to set the audio drivers off? maybe he knows but I don't. sorry
thank you both so much for your response. -
To view the data in open hub destination
Hi all,
Can anyone help me out how to check the data in open hub destination file.
These are the details:
Destination: File
Type of file : Logical file
Application Server file name : XXXXXXX
If it was file name, i know it has to be checked in AL11 with directory name and file name.
Here its a logical file name. Which is the directory corresponding to this?
Thanks,
tinkugeoHi,
Question: "Are all the logical files are saved in the home directory DIR_HOME?
Please correct me if I am wrong"
Ans: When you create an Open hub destination using Physical file, the file will get created in DIR_HOME directory (by default) in AL11
And for locating the physical path in AL11. Go through the below link. it gives ans to all your ques
http://bx.businessweek.com/sap/view?url=http%3A%2F%2Fweblogs.sdn.sap.com%2Fpub%2Fwlg%2F17370
Edited by: kumkum basu on May 20, 2010 8:20 AM -
Hi All,
we are using Open Hub service in BI7.
we are transferring the data from BI to another server. when i execute the DTP of open Hub then file will generate and it will post in the application server(T-Code AL11).
in Open Hub we have the two deli motor options.
1) pipe symbol
2)semicolon
but i want to post the file in fixed length format, means without using any delimitor options.
how can i do this, please suggest me...
Thanks
KrishnaYou try removing the separator (its not mandatory) in OHD's destination tab and activate your OHD.
But i think it will take the separator automatically based on file type. For ex: semicolon for a csv file.
Edited by: Pravender on Sep 24, 2009 12:01 PM -
Dear all,
I'm trying to create an open hub flat file with fixed width (file should be ";" seperated but also fixed width). Nevertheless I have a problem with adding trailing spaces.
Does anyone know if/how this can be done?
thanks,
TomHi Tom,
As far as I know Open Hub (InfoSpoke) is used for extracting the data to file or... and it's dependent on the type of data ( or data type) you have in Objects.
But if you want any further modification in the file try to write a separate ABAP code for reading and than modifying file as per your requirement.
Hope this helps!!
Regards,
Ashish
Maybe you are looking for
-
When I replaced my PC desktop with a Mac Mini and hooked up my HP printer to it, I discovered that my other computers on the Wi-Fi network could no longer access the printer. The manual says Maverick OS will not allow PC's to share the printer. Does
-
I want to disable db_recovery_file_dest backup area? how
In my database I issue the following sql query SQL> alter system set db_recovery_file_dest=' ' scope=both; alter system set db_recovery_file_dest=' ' scope=both ERROR at line 1: ORA-02097: parameter cannot be modified because specified value is inval
-
AR Invoice Original 3 Copies should be printed in one command
Hi Gurus, Requirement is When I click on print command, system should print ORIGINAL , DUPLICATE, TRIPLICATE SO on...at once I have seen a thread already in SDN But i needed more information on the inputs.... If i need to develop an addon please pro
-
How can I use the iPad in spanish?
If I buy an iPad in USA, can I use it in spanish language? Wait for your answer. Thks Marcia
-
Raj, When I use a textarea with spell checker everything works for the first few steps... The Checked text pops up, but if I click a question mark next to a bad word, a new little box pops up... But it has an invalid URL so I get the IE error message