Open Hub Objects Tranport Issue

Hi,
Environment - BI 7, SP level - 17.
Trying to transport Open Hub destination DTP object (DSO to Flat File) from the Dev to QA box. Output file name is defined (Created Logical file) using Tcode - FILE. The Logical File Name is available in Dev, QA.
In Dev box, we are able to write Output to a FLAT File (Application Server).
While transporting DTP getting Transport error - Return Code - 12. (No clear message for this Error Message or Dump file created).
Also applied OSS Note - 1175391 and 1241173.
To overcome this issue, your valuable suggestions highly appreciated.
Thanks,
Madhu.

Hi Madhu,
I think the below link will helps you...
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/d063282b-937d-2b10-d9ae-9f93a7932403
Regards
Sudheer

Similar Messages

Open Hub Destination Delta issue

Hi experts,
We have a scenario in which a Open hUb is created on top of a cube.
Regular delats are moving from this cube to Open hub daily.
But as per the request, we had to dump the cube data, and the reload took, 2 days to complete.
So, that 2 days, data got missed in Open hub.
Now, as the new request are not datamarted, next time wen the DTP between Cube and Open Hub runs, it will fetch all the requests right. we dont want that.
So, can we run a init w/o data transfer so that source status will be fetched?
but then how to load that 2 days data alone.
Kindly advise.
Edited by: neethacj on Mar 7, 2012 1:06 PM

If the cube doesnt have any other targets aprart from this OHD,
delete the two days requests in the cube, set the init from cube to ohd
load the cube for delta( brings two days requests) and run the ohd

Issue in transport regarding Open Hub Services

Hi All,
I have a strabge scenario, where I am moving one of my open hub related transport from system test env to UAT,but each time it's failing.
The story behind is: I have a infospoke based on one ODS,where I have included a field called BRAND in the source structure.
This transport went fine from Dev to Sytem test env,but it's failing while moving from System test to UAT.
Error is.
Program ZCL_IM_ZLP_WRKF===============CP, Include ZCL_IM_ZLP_WRKF===============CM001: Syntax error in line 000085
The data object 'WA_SOURCE' does not have a component called '0IS_CLAIM__BRANDVALE'.
Any comment will be appriciated.
Regards,
Kironmoy Banerjee.

Hi,
Generally transports fails with different situations like, by sequence and dependecy missing / with in active objects/ with RFC issue.
so, we should follow the sequence and dependency while transporting the objetcs and they should be in active state in the source first.
In your case, check your source fields whether they mapped correctly or not and it should be in active state.
as per your error:
The data object 'WA_SOURCE' does not have a component called '0IS_CLAIM__BRANDVALE'.
Check source "'WA_SOURCE", why does not have the component called "0IS_CLAM_BRANDVALE". I think the souce missing the component called ""0IS_CLAM_BRANDVALE".
see whether it was mapped correctly/active or not and follow the seqence if there are any dependancy and retransport the request.
Regards.
Rambabu

Open hub destination issue

Hi,
In our project we have Client Instance (eg: BWPD) and Application server (eg: BWPRD) defined for load balancing.
We have created open hub and assigned destination server BWPD.
When i execute the DTP manually in BWPD, it runs succesfully.
However, the same DTP when placed in the process chain fails with error message :
No Such File or Directory
Could not open file D:\usr\sap\BWPD\A01\work\Material on application server
Error while updating to target ZXXXX.
Options Tried:
Schedule process chain in the background server BWPD (same server which has been mentioned in Open hub dest) still DTP failed.
Tried with Application server it failed.
Tried with HOST as option it failed.
couldn't make out what is going wrong. Any thoughts ?
Regards.

Hi there,
found that doc quite useful.
Maybe could shed some light to your issue.
[Creating Open Hub Destination using a Logical file to extract the data|Creating Open Hub Destination using a Logical file to extract the data]
Also, what OS do you have?
is the Syntax Group accordingly created ?

Error in Transporting Open Hub Destination Objects

Hi Experts,
When i transport the open-hub destination to Quality server from development, the error No Rule Type Exists occurs while activating the transformation.
The objects are transported but transformation & DTPs are inactive.
Please assist as this is for the first time Open-Hubs are being transported in my system.
Any help will be greatly appreciated.
Thanks,
Sumit

Hi,
the return code is 8
I checked and here is error log:-
Start of the after-import method RS_TRFN_AFTER_IMPORT for object type(s) TRFN (Activation Mode)
   Activation of Objects with Type Transformation
   Checking Objects with Type Transformation
   Checking Transformation 08FM6JIPU6MCLHM2LWBY02OT6SXOPDNY
   No rule exists
Checking Transformation 09RS1PONVSGIHIJEHRGDCWPP4UD87TBY
   No rule exists
Checking Transformation 0MJTLNXZAUI7SKRWPKEFUIOCMB8X5TWQ
   No rule exists
Saving Objects with Type Transformation
Thanks,
Sumit

Issue for DTP from DSO to open hub destination

Hello Gurus,
        I have a issue for DTP from DSO to open hub destination, long text for error in the monitor is as follows:
          " Could not open file
SAPBITFS\tst_bi\bit\BIWork\GENLGR_OneTimeVendr_2 on application server"
          " Error while updating to target ZFIGLH03 (type Open Hub Destination)     "
      for open hub destination, I check the configure for logical file name , which is "
SAPBITFS\tst_bi\bit\BIWork\GENLGR_OneTimeVendr",
I am wondering where that file "
SAPBITFS\tst_bi\bit\BIWork\GENLGR_OneTimeVendr_2" in the error message comes from?
Many thanks,

Hi
You do not need to create a file in application server. It will be created automatically.
But if you have defined a logical file name in tcode FILE and used that in OHD and if it is not correct then it will show a conflict. Check this out.

Archiving object in open hub with logical file name

Hello,
I am trying to use an open hub with a logical file name.
By the SAP help looks like you have to use/define a archiving object:
http://help.sap.com/saphelp_nw70/helpdata/en/e3/e60138fede083de10000009b38f8cf/frameset.htm
http://help.sap.com/saphelp_nw70/helpdata/en/8d/3e4ec2462a11d189000000e8323d3a/frameset.htm
Steps 1 and 2 of "Defining Logical Path and File Names" are done and tested:
       1.      Definition of the logical path name
       2.      Definition of the logical file name
       3.      Assignment of the logical fine name for the archiving object
But is it not clear to me if an archiving object is suppose to be used, which one then?, or if you have to create a new archiving object, with which characteristics?
Any help welcome,
Alberto.

Alberto,
Can you explain what you are trying to do. Are you trying to archive data from a BI object or are you trying to export data out of a BI object using open hub.

Open hub issues

Hi,
open hub issues occured in the process chain. Some of the files didnt reach to the external customer directories. so i want to know where can i insert the abap code 7.0 so that external tool picks up the files once all files have been reached to BWP/Interface in T-code AL11.
In 3.5 you can insert the code in infosporke using BADI. Only possibility i think of transformations but not sure where to insert it.
Thanks in advance
krish

Hi Krish,
It is my understanding that the files would not be available on the application server until after the transformation step has
been completed. Therefore it would not be useful to create a routine in the transformation.
Maybe you could create a program that could be inserted in the subsequent step of the process chain?
Best Regards,
Vincent

How to change the nodes open hub destination objects?

Hi,
How one can change the nodes of open hub destination objects?
As there was a need to change the nodes for certain open hubs i wonder how this could be acheived?

well,
I have open hub destination object saved under one node ( Yes that is Infoarea only )
but now i notice that i need to save this open hub under different info area..
so how can i change the infoarea of an open hub with out deleting and recreating it?

Open Hub DTP issue (Error 21 when writing to the local workstation)

Hi,
I am using an openhub destination to output my csv file. Its a local workstation share folder. Data Provider got around 50000 rows (expecting a 40MB file). When ever I execute the DTP, it run for first data package and fell down with below error message.
Error 21 when writing to the local workstation
Error while updating to target XXXXXXX (type Open Hub Destination)
Operation could not be carried out for
Exception CX_RS_FAILED logged
Exception CX_RS_FAILED logged
Sometimes the file get created with partial entries, most of the times the file wont even get created. I created new dtps and tried the same. Changed the package size, servers, parallel processes etc, but of no use.
Thanks Neo

Hi Neo,
Did you try to define the logical/physcal file path from tcode FILE? If not can you try to use this option and see if it works.
Also can you change your DTP settings by reducing the data packet size to see if your facing this error message?
Thanks
Abhishek Shanbhogue

Open Hub Destination with Application Server Issue

Hi all,
I have requriment that i need to save my monthly data in application server with the help of OPen Hub Destination.I have created an DSO
on that DSO i have created an Open HUb with application server as target.When i store my every month file in application server that file name should be a per the system date.
So i have Created an LOgical File----ztest_data
Assgined Physical path to Logical File-----/usr/sap/<sysid>........
created an Logical File name------Ztest_data_file....
IN the open HUb i have selected Aplication Server as My target and i have checked the box.
I have selected Logical FIle name and given the file name which i have created-----ztest_data_file...
Runned DTP it is showing no errors,but when i check in AL11 ,in the path which i have given(/usr/sap/<sysyid>........,i couldnt find the file.....
Please check this and let me know...
Thanks In Advance,
Bobby.

Hi,
Please check the link /people/jyothi.velpula/blog/2010/01/20/creating-open-hub-destination-using-a-logical-file-to-extract-the-data .
Also is your DTP full or delta. Try running the DTP as Full.
Hope it helps.
Best Regards,
Kush Kashyap

Open Hub - Infosets as source and 'template fields' button

Hi all,
Two questions re Open Hub on 04s (we are on SP8). I've surfed OSS, help.sap.com and SDN with no luck re answers to these:
- I've defined an infoset as my source of an open hub destination. It appears I must create a transformation, but it generates no proposal, and I'm not sure how/if I can add a virtual object (such as an infoset) as a source in a transformation. It appears that the DTP requires this transformation to be defined. Am I missing something? So far, testing on all other objects has been successful.
- How does one use the button 'Template Fields' when defining fields in an OHD? I expected to see options to insert groups of fields (ex. all fields of an infoobject and its attributes), but I don't see any options available.
Thanks!
Lonnie

Update:
I was able to create the transformation (issue found btw keyboard and chair).
New problem: I am unable to activate my DTP. When choosing the source for my DTP, I get a popup window (as normal) to choose the possible sources, but the infoset is not available for selection. Only the 'pieces' of the infoset (the two DSO's that comprise the infoset), and this doesn't help me because my source is the infoset, not the indivudual tables of it.
Also, I cannot change the extraction mode to FULL. Only delta is available.
Thanks in advance for any help.

Open Hub Destination to Oracle database

Hello All ,
I am supposed to send data from my SAP BI (7.0) system to and Oracle Database using open hub destination. I have to use the option " Third Party " as destination while creating the Open Hub Destination .
From my reading and acc to Basis I realised that I need a 3rd party ETL tool in between BI and Oracle system to write data into the Oracle system since oracle is not SAP RFC aware . The 3rd party ETL that I am supposed to use in this is Business Objects - Data Integrator(BO-DI) . If anyone has implemented this type of Open hub service please throw some light on this issue as to how to setup the 3rd party ETL in between and how to proceed . Any how to document would also be useful .
Thanks and Regards,
Riddhi

Hi,
Pls go thru this links,
http://help.sap.com/saphelp_nw70/helpdata/EN/43/79f902dfb06fc9e10000000a1553f6/frameset.htm
http://help.sap.com/saphelp_nw70/helpdata/EN/43/79f902dfb06fc9e10000000a1553f6/frameset.htm
Hope it helps u,
Thanks & Regards,
SD

Open Hub For BPC Cubes

Hi Gurus,
I have an issue about the open hubs for BPC cubes. I have a need to take my transactional data from my BPC cube to a table.So I want to create an open hub on my BPC planning cube.
But when i create the open hub on BPC cube, it doesn't read the package. So, data cannot be read. But the open hubs work on my BW cubes.
Is there anything i should do different for BPC cubes ? How can i make the open hub work?
Thanks in advance..
Fatih

Hi Fatih,
Glad you got this working, but a word of warning: As far as I am aware, customer SAP BW development linked to objects in the BPC namespace is not supported. It may very well work, but BPC may also delete and recreate BW objects at any time and without warning, which can leave you in a situation in your production environment that is very difficult to recover from without manual modification of the production BW environment.
The recommended way to export data from BPC NW into a flat table is to use the BPC data manager Export package. You may want to try this option and see if you can meet your requirements this way.
Ethan

Sample Code in BADI for Open Hub Services

Hi all,
        We have a requirement to extend(add few new fields and populate them using BADI) for the target structure of Infospoke in Open hub services.
I have 2 issues which are stopping us to proceed further.
       1.   I did this by just adding new fields in this change mode of target Structure (didn't used 'Append structure' as while saving and creating T.port request,its popping error like 'Structure not present in TRDIR).I am not able to assign this to any T.request,as of now I have saved it as Local object.How can I assign this to an request?is it possible?.
       2. After putting breakpoint in the BADI I don't see any data in the Importing table.I need some sample code in the BADI which should populate the New fields in the target structure.
It will be great if anyone of you will give us any solution for the same.
Thanks,
Rahul.
Edited by: Rahul Siddi on Oct 12, 2009 3:04 PM

Hello Rahul,
Find the code below with the steps to be implemented.
Enter your infospoke in the edit mode.
- On the Transformation tab set the indicator for the Infospoke with Transformation with BADI so that the infospoke is activated.
- This will take you to the Addin implementation/BADI builder.
- Enter the short text/description for the implementation. The implementation name is always the same as the technical name of the infospoke
- The implementation of the BADI is always filter dependant.
- In the properties tab of the infospoke enter your infospoke under the Filter specifications.
If you do not specify an InfoSpoke under Filter Specifications, then this implementation is valid for all InfoSpokes. This means that this is called up for all InfoSpokes during the extraction.
- Activate your class
- From your interface tab page, double click on the Transofrm Method and you will arrive in the class builder page
- Here you can enter the code
- To do a look up of the master data you have to write a code similar to the one I've given below. This is just an example for looking up material master.
IF FLT_VAL = 'Your infospoke'.
T_DATA_IN] = I_T_DATA_IN[.
Select zstd_cost from /bi0/pmaterial into table T_return
For all entries in T_DATA_IN
WHERE material = T_DATA_IN-material.
...Continue with your code.
Append output from T_return to your output E_T_DATA_OUT
- Activate your method. Return to the BAdI builder. Return to your InfoSpoke.
Check if you missed any of these...
Kris...

Open Hub Objects Tranport Issue

Similar Messages

Maybe you are looking for