Open in mail error

hi there
iphone 4 - iOS 6.0
I'm opening a pdf in adobe reader app, putting a sign and then trying to open the file in mail:
it gives me system error and the app crash down
thanks

You appear to have deleted or otherwise messed with some system files and aren’t providing all the relevant information here.
Quit all the applications and verify/repair the startup disk (not just permissions), as described in the following article:
The Repair functions of Disk Utility: what's it all about?
After having fixed all the filesystem issues, if any, try reinstalling the Combo Update for the type of computer and the version of Mac OS X you’re using (which you haven’t provided either, but I’ll assume it’s Mac OS X 10.3.9), unless this is the version of Mac OS X that came with the computer:
Mac OS X 10.3.9 Combo Update
You may also have to reinstall the following Security Update, which includes most of the security updates released after Mac OS X 10.3.9:
Security Update 2007-008 (10.3.9 Client)
Take a look at the following articles for guidelines on how to properly install system updates:
Troubleshooting installation and software updates
Installing software updates
Basically, you should verify/repair the startup disk and back up before installing the update, no applications should be running while installing it, and you may experience unexpected results if you have third-party system software modifications (not normal applications) installed.

Similar Messages

I have open office. Someone sent me e-mail I can't open. get error message power pc no longer supported. How do I open this doc?

I have open office. Someone sent me e-mail I can't open. get error message power pc no longer supported. How do I open this doc?

Right click your document, hover over "Open with..." and then click "Other".
Find TextEdit and click "Open".
TextEdit will then do it's best to open your document.
If you have iLife, do the same but instead of opening with TextEdit open with Numbers, Pages, Keynote, e.t.c.
To download iLife, click here.
If the above link does not work, click here.
-----EDITS-----
Added "If the above link does not work" at the bottom of the post.
<Edited by Host>

How could I re-open my mail box with error message :The last time you opened Mail, it unexpectedly quit while reopening windows. Do you want to try to reopen its windows again?

How could I re-open my mail box, as an error message blocked "The last time you opened Mail, it unexpectedly quit while reopening windows. Do you want to try to reopen its windows again?" Even I entered re-open, the airbook does not response but prompt the same error message again.

Please follow these directions to delete the Mail "sandbox" folders. In OS X 10.9 there are two sandboxes, while in 10.8 there is only one. If you're running a version older than 10.8, this comment isn't applicable.
Back up all data.
Triple-click anywhere in the line below on this page to select it:
~/Library/Containers/com.apple.mail
Right-click or control-click the highlighted line and select
Services ▹ Reveal
from the contextual menu.* A Finder window should open with a folder named "com.apple.mail" selected. If it does, move the selected folder — not just its contents — to the Desktop. Leave the Finder window open for now.
Log out and log back in. Launch Mail and test. If the problem is resolved, you may have to recreate some of your Mail settings. You can then delete the folder you moved and close the Finder window. If you still have the problem, quit Mail again and put the folder back where it was, overwriting the one that may have been created in its place. Repeat with this line:
~/Library/Containers/com.apple.MailServiceAgent
Caution: If you change any of the contents of the sandbox, but leave the folder itself in place, Mail may crash or not launch at all. Deleting the whole sandbox will cause it to be rebuilt automatically.
*If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination command-C. In the Finder, select
Go ▹ Go to Folder...
from the menu bar, paste into the box that opens (command-V). You won't see what you pasted because a line break is included. Press return.

Using 10.5.8 when open mac mail keeps giving Certificate error

trying to help someone with a mac book
10.5.8
when open mac mail keeps giving certificate error.
checked and everything seems fine with settings
ssl is not turned on for incoming and outgoing
not sure what is giving them this error and trying to assist them
any suggestions would be appreciated

* Download a new copy of the Firefox program: http://www.mozilla.com/firefox/all.html
* Trash the current Firefox application to do a clean (re)install.
* Install the new version that you have downloaded.
Your profile data is stored elsewhere in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Firefox Profile Folder], so you won't lose your bookmarks and other personal data.

HT4796 I keep getting a Windows Mail error when trying to run the assistant on my pc, but I don't have any email programs open.

I keep getting a Windows Mail error when trying to run the assistant on my pc, but I don't have any email programs open.

You could of course use Safari your default browser as a quick method of accessing gmail until you figure out the Firefox problem. (More than one browser may be used on a Mac or other computer).
Is this the only site you have problems with ? and does Safari work ok ?
Often this problem requires the page to be reloaded
* try pressing the shift key as you reload the page
Another problem is sometimes the cookies for that site need clearing
* see [[Delete cookies to remove the information websites have stored on your computer#w_delete-cookies-for-a-single-site]]_delete-cookies-for-a-single-site
* see also [[Firefox and other browsers can't load websites]] or[[Firefox can't load websites but other browsers can]]

Lion installed, can't open mail, error messge

It has to be a fix, anyone?

Fixed! Open new mail in the application folder, it works! The original mail has to be converted to the new mail.

TCP active open: Failed connect() Error: Connection timed out SMTP

Hi,
Messaging server version is,
./imsimta version
Sun Java(tm) System Messaging Server 6.2-6.01 (built Apr 3 2006)
libimta.so 6.2-6.01 (built 11:20:35, Apr 3 2006)
SunOS bglbbmr1-a-fixed 5.9 Generic_118558-28 sun4u sparc SUNW,Sun-Fire-V440
17-Dec-2008 10:47:40.08 1730.8e.741
tcp_local Q 4 [email protected] rfc822;[email protected] [email protected] /mta/queue/queue/tcp_local/013/ZUg0i1t9I0ZG~.00 <[email protected]>; TCP active open: Failed connect() Error: Connection timed out SMTP/xyz.my-domain.in
I have been getting this above error on my mail server from last
4-5 days. I am getting complaints from end users that the users can't
send any mails using Outlook but I did check with my test user I can
send mail by using webmail.
The Failed MX lookup Errors also getting in my logs the error detail given bellow.
17-Dec-2008 10:47:39.65 1730.91.737
tcp_local - Y TCP|0.0.0.0||209.85.143.114|25 SMTP/airtelmail.in/aspmx.l.google.com
17-Dec-2008 10:47:39.92 1754.41.255
tcp_notify - Y SMTP/infomedia18.in/infomedia18.in
17-Dec-2008 10:47:39.92 1754.41.256
tcp_notify Q 7 rfc822;[email protected] [email protected] /mta/queue/queue/tcp_notify/017/ZXg0i1t3U_ZoD.00 <[email protected]>; Failed MX lookup; try again later
17-Dec-2008 10:47:39.94 1754.41.257
tcp_notify Q 6 rfc822;[email protected] [email protected] /mta/queue/queue/tcp_notify/010/ZXg0i1t3U_ZoF.00 <0KBZ003MRGU7MQ30@my-domain> Failed MX lookup; try again later
I tried stopping and starting msg service using stop-msg and start-msg to sort out this above problem but no result. :(
When I do check the tcp_local queue it has been growing every day as well the tcp_notification queue also.
/opt/SUNWmsgsr/sbin/imsimta qm su
Messages
Channel Queued Size (Kb) Oldest
tcp_notify 10741 1080610.61 16 Dec, 00:59:24
tcp_local 8334 733849.31 15 Dec, 00:19:00
tcp_lmtpcn 0 0.00
tcp_be 0 0.00
reprocess 0 0.00
process 0 0.00
conversion 0 0.00
Totals 19075 1814459.92
This queues are increasing day by day.
One more thing is that I cant see a service/channel called CONVERSION running on my server when i do use this command.
ps -aef | grep conversion
root 6144 6000 0 11:14:28 pts/1 0:00 grep conversion
When i try to start it using imsimta qm utility, output shows as
qm.maint>; start conversion
QM-I-STARTED, channel was not stopped
qm.maint>;
Later I stopped and started conversion channel
qm.maint>; stop conversion
QM-I-STOPPED, channel stopped
qm.maint>; start conversion
QM-I-STARTED, channel started
qm.maint>;
I can see that on other servers the conversion channel is running and few msges are in queue. I do have other servers which running the same messaging server. But I am not getting why don't on this server. Where both servers having the same configuration.
Please, help me to sort out this issue.
Thanks in advance....
BSK

Thanks Mr. Shane,
The server which is running conversion channel.
ps -eaf|grep conversion
mailserv 16824 8472 3 17:08:11 ? 0:48 /opt/SUNWmsgsr/lib/conversion
mailserv 28728 8472 0 17:17:30 ? 0:00 /opt/SUNWmsgsr/lib/conversion
root 1057 26387 0 17:18:12 pts/1 0:00 grep conversion
more /opt/SUNWmsgsr/config/conversions
in-channel=*; in-type=application; in-subtype=*; in-disposition=*;
parameter-symbol-0=NAME; parameter-copy-0=*;
dparameter-symbol-0=FILENAME; dparameter-copy-0=*;
message-header-file=2; original-header-file=1;
override-header-file=1; override-option-file=1;
command="/opt/SUNWmsgsr/private/virusscan.sh"
in-channel=*; in-type=x-zip-compressed; in-subtype=*; in-disposition=*;
parameter-symbol-0=NAME; parameter-copy-0=*;
dparameter-symbol-0=FILENAME; dparameter-copy-0=*;
message-header-file=2; original-header-file=1;
override-header-file=1; override-option-file=1;
command="/opt/SUNWmsgsr/private/virusscan.sh"
in-channel=*; in-type=image; in-subtype=*; in-disposition=*;
parameter-symbol-0=NAME; parameter-copy-0=*;
dparameter-symbol-0=FILENAME; dparameter-copy-0=*;
message-header-file=2; original-header-file=1;
override-header-file=1; override-option-file=1;
command="/opt/SUNWmsgsr/private/virusscan.sh"
in-channel=*; in-type=audio; in-subtype=*; in-disposition=*;
parameter-symbol-0=NAME; parameter-copy-0=*;
dparameter-symbol-0=FILENAME; dparameter-copy-0=*;
message-header-file=2; original-header-file=1;
override-header-file=1; override-option-file=1;
command="/opt/SUNWmsgsr/private/virusscan.sh"
in-channel=*; in-type=video; in-subtype=*; in-disposition=*;
parameter-symbol-0=NAME; parameter-copy-0=*;
dparameter-symbol-0=FILENAME; dparameter-copy-0=*;
message-header-file=2; original-header-file=1;
override-header-file=1; override-option-file=1;
command="/opt/SUNWmsgsr/private/virusscan.sh"
Following entry from /opt/SUNWmsgsr/lib/config-templates/imta_tailor
IMTA_CONVERSION_FILE=<msg.RootPathUNIX>/config/conversions
The server which doesnt show running conversion channel
#more /opt/SUNWmsgsr/config/conversions
!in-channel=*; in-type=*; in-subtype=*; in-disposition=*;
! parameter-symbol-0=NAME; parameter-copy-0=*;
! dparameter-symbol-0=FILENAME; dparameter-copy-0=*;
! message-header-file=2; original-header-file=1;
! override-header-file=1; override-option-file=1;
! command="/opt/SUNWmsgsr/private/virusscan.sh"
in-channel=*; in-type=application; in-subtype=*; in-disposition=*;
parameter-symbol-0=NAME; parameter-copy-0=*;
dparameter-symbol-0=FILENAME; dparameter-copy-0=*;
message-header-file=2; original-header-file=1;
override-header-file=1; override-option-file=1;
command="/opt/SUNWmsgsr/private/virusscan.sh"
in-channel=*; in-type=x-zip-compressed; in-subtype=*; in-disposition=*;
parameter-symbol-0=NAME; parameter-copy-0=*;
dparameter-symbol-0=FILENAME; dparameter-copy-0=*;
message-header-file=2; original-header-file=1;
override-header-file=1; override-option-file=1;
command="/opt/SUNWmsgsr/private/virusscan.sh"
in-channel=*; in-type=image; in-subtype=*; in-disposition=*;
parameter-symbol-0=NAME; parameter-copy-0=*;
dparameter-symbol-0=FILENAME; dparameter-copy-0=*;
message-header-file=2; original-header-file=1;
override-header-file=1; override-option-file=1;
command="/opt/SUNWmsgsr/private/virusscan.sh"
in-channel=*; in-type=audio; in-subtype=*; in-disposition=*;
parameter-symbol-0=NAME; parameter-copy-0=*;
dparameter-symbol-0=FILENAME; dparameter-copy-0=*;
message-header-file=2; original-header-file=1;
override-header-file=1; override-option-file=1;
command="/opt/SUNWmsgsr/private/virusscan.sh"
in-channel=*; in-type=video; in-subtype=*; in-disposition=*;
parameter-symbol-0=NAME; parameter-copy-0=*;
dparameter-symbol-0=FILENAME; dparameter-copy-0=*;
message-header-file=2; original-header-file=1;
override-header-file=1; override-option-file=1;
command="/opt/SUNWmsgsr/private/virusscan.sh"
Following entry from /opt/SUNWmsgsr/lib/config-templates/imta_tailor
IMTA_CONVERSION_FILE=<msg.RootPathUNIX>/config/conversions
Is this above information u r asking?
As u wrote erlier, the conversion channel works some times and some times doesn't work.
Thanks lot...
BSKADAM

While trying to open the mail , it shows a blank screen then went to home page.

while trying to open the mail , it shows a blank screen then went to home page.

Hello there, Nina2800.
It sounds like you are having issues connecting to the iTunes Store and getting a blank page. The following Knowledge Base article offers up some great steps for verifying connectivity:
Can't connect to the iTunes Store
http://support.apple.com/kb/TS1368
Troubleshooting on a Mac
If you haven't been able to connect to the iTunes Store, a software conflict or your internet service provider (ISP) may be blocking your access.
Update iTunes to the latest version.
If you have a firewall, your settings may be preventing you from connecting to the iTunes Store. To configure your firewall, please refer to the "Blocked by firewall" section in this article.
You may need to reset your keychain. Connection issues are occasionally caused by keychain issues. Click here to find out how to use Keychain First Aid to resolve any issues with your keychain.
If you are receiving a specific error message you may want to see, the "Specific Conditions and Alert Messages" section in this article as needed.
If the issue still persists, contact your internet service provider and confirm that the ports and servers in this article are enabled over your network.
Additionally, this article provides some additional recomendations if the issue persists:
iTunes: Advanced iTunes Store troubleshooting
http://support.apple.com/kb/ts3297
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.

SpamAssassin / Amavisd tuning - TCP active open: Failed connect() errors

I started this post as we were experiencing a problem with occassional delayed mail delivery to our mail store. As I continued writing it, I think that I've resolved it. But I wanted to post this anyway so if I'm doing things right it might help someone else; or, if I'm doing something wrong someone can correct me. :) For reference, we have a quad Sun v440, and process about 500,000 messages a day.
We were seeing messages like this in our log files:
09-Nov-2006 08:28:09.37 tcp_scan Q 1 [email protected] rfc822;[email protected] @tcp_scan-daemon:[email protected] TCP active open: Failed connect() Error: Connection timed out
example.com represents our local domain. The errors seemed to occur proportionally to the amount of incoming mail we received. That is, we saw more of them under load.
We are running SpamAssassin, Amavisd/clamav, and:
Sun Java(tm) System Messaging Server 6.2-5.01 (built Nov 22 2005)
libimta.so 6.2-5.01 (built 11:57:57, Nov 22 2005)
SunOS hostname 5.9 Generic_118558-11 sun4u sparc SUNW,Sun-Fire-V440
This line seems to say that the message is in the tcp_scan channel, and cannot send to 127.0.0.1:10024 (amavisd) because that port isn't listening.
My amavisd max_servers was set at 15. After reading http://www.ijs.si/software/amavisd/amavisd-new-magdeburg-20050519.pdf and making a wild guess, I increased it to 30. The errors were less frequent, but still occurred.
The output of 'sar -d' showed that my local disk was experiencing upwards of 80% utilization. I moved the amavisd temp directory and the spamassassin bayes db to a san volume, and that sped everything up dramatically. The connect errors went away, clamav avg time per message is at 4 seconds down from 10. I am now receiving errors from spamassassin that say:
Nov 9 10:27:27 hostname.example.com spamd[21601]: prefork: server reached --max-children setting, consider raising it
My --max-children is set to 25 right now, and the server is cpu bound under heavy load, so I see no reason to raise it.
So this is my setup. I am no longer having an immediate problem, but comments/questions are welcome.
Config files related to my setup are below.
Excerpts of imta.cnf:
! tcp_scan
[] $E$R${tcp_scan,$L}$U%[$L]@tcp_scan-daemon
! ims-ms
ims-ms defragment subdirs 20 notices 1 7 14 21 28 backoff "pt5m" "pt10m" "pt30m" "pt1h" "pt2h" "pt4h" maxjobs 2 pool IMS_POOL destinat
ionspamfilter1 fileinto $U+$S@$D
ims-ms-daemon
! tcp_local
tcp_local smtp mx single_sys remotehost inner switchchannel identnonenumeric subdirs 20 maxjobs 7 pool SMTP_POOL saslswitchchannel tcp
auth maytlsserver maysaslserver missingrecipientpolicy 0 aliasdetourhost tcpscan-daemon
tcp-daemon
! tcp_intranet
tcp_intranet smtp mx single_sys subdirs 20 dequeue_removeroute maxjobs 7 pool SMTP_POOL allowswitchchannel saslswitchchannel tcp_auth
maytlsserver maysaslserver missingrecipientpolicy 4 aliasdetourhost tcp_scan-daemon
tcp_intranet-daemon
! tcp_scan
tcp_scan smtp single_sys subdirs 5 notices 1 backoff "pt10m" "pt30m" "pt2h" "pt4h" dequeue_removeroute maxjobs 7 pool SMTP_POOL daemon
[127.0.0.1] port 10024
tcp_scan-daemon
option.dat:
SPAMFILTER1_LIBRARY=/opt/sunjes/SUNWmsgsr/lib/libspamass.so
SPAMFILTER1_CONFIG_FILE=/opt/sunjes/SUNWmsgsr/config/SpamAssassin
SPAMFILTER1_STRING_ACTION=data:,require ["addheader"]; addheader "Spam-test: $U"; require "fileinto"; fileinto "Junk";
SPAMFILTER1_OPTIONAL=1
dispatcher.cnf:
[SERVICE=SMTP-SCAN]
DEBUG=-1
PARAMETER=CHANNEL=tcp_scan
PORT=10025
IMAGE=IMTA_BIN:tcp_smtp_server
LOGFILE=IMTA_LOG:tcp_scan-server.log
STACKSIZE=2048000
INTERFACE_ADDRESS=127.0.0.1
SpamAssassin:
host=127.0.0.1
port=783
debug=0
mode=1
field=
verdict=Junk
USE_CHECK=0

Suggest dropping Amavis in preference to the built-in
integration, per our documentation. Simpler, more
performant.Sorry, my title wasn't very accurate. We are running SpamAssassin through the built in integration, and clamav through amavisd. There isn't any built in integration to clamav, is there?

TCP active open: Failed connect() Error: Connection timed out

Hi,
There is one message which can't be delieved to the recepient with error " TCP active open: Failed connect() Error: Connection timed out" This is the error that we found in the mail.log_current file.
I have no problem sending email to the same address from my hotmail account.
any suggestion ?
Thanks,
Joe

The message can only mean one thing. Your server cannot connect to that host.
It's possible that the remote system is lying to your Messaging Server, and that's gotten it confused. Some firewalls do this by repeating the entire capability string from the server behind them, but can't actually handle all the capabilities.
PIX firewalls do this.
When you connect, they pretend to be able to "startls", but if you try, they hang up. They appear to handle "EHLO", but when you try, they hang up.
You can put debugging on the tcp_local channel, and see the actual conversation, if you like.
master_debug and slave_debug go into the imta.cnf definition line. MM_DEBUG=5 goes at the end of your option.dat file.
then
imsimta cnbuild
imsimta restart
will attempt to send the message. You will want to back the changes out, as you'll get lots of extra log files you really don't need.
Post the log file, and we can see what's happening.

Offline/online mail error

Error Dialogue Box:
Some actions taken while the account "xnaatmacdotcom" was offline could not be completed online.
Mail has undone actions on some messages so that you can redo the actions while online.
Additional information: Operation could not be completed. (MFMessageErrorDomain error 1028.)
This error is making me very angry. Something is not allowing me to receive in new mail, although I can send out through the mail program. All I can think of is last night I was over at a friends house showing them the Mac OS, I wasn't connected to their network, and when I opened my mail program it sat for a bit and then said... you are not connected to the network. Of course.
I also upgraded to 10.5.2, but for some reason I'm not suspecting that as the issue.
Anyone come across this before? My account settings look fine, I am showing as "online" and I can send, but not receive, from the program.
It also seems to be stuck on sending... something. The activity icon is showing next to the sent mailbox & if I check on the activity I get:
Performing pending operations
Copying message
xnaatmacdot com Communicating with server
adding messages
Fetching new mail
fetching new mail
Synchronizing with server
traversing mailbox hierarchy.
If I click the stop icon next to performing pending operations it doesn't quit it, but then I also don't get the error message above when quitting out of mail.
I trashed the preferences, but nothing good happened. If I go to .mac mail on the web then I can see all my new e-mail.
Any help?

i am getting this too after the 10.5.2 update and trying to see if IMAP problems were fixed. it keeps trying to copy sent messages to the server but since Mail doesn't work properly with some servers this will never happen.
anyone know of a way to get rid of "Pending operations"?

I am not able to open my mail appicaton?

i am not able to open my mail application. i am getting an error if i open my mail.....

Mail won't run in Classic operating systems from 2001 and earlier, also available as boot operating systems on Macs from 2003 and earlier.
Are you trying to load it in Classic, or some version of Mac OS X? Go to Apple menu -> About This Mac to find out your operating system version.
Are using any system cache cleaning software? That may be the culprit. The worst of them is MacKeeper, documented here as to how to remove:
https://discussions.apple.com/docs/DOC-3036

HT201260 MAC OS X 10.6.8 updated auto installed and now I can open my mail, help?

I updated my software to MAC OS X10.6.8 on my mac mini and now I can not open my mail. I'm getting an error message that states mail version can not be opened. Any suggestions how to fix? I did what the "help" info said but no luck

sanjampet, please stop giving people completely irrelevant suggestions for this issue. This issue is specifically related to the most recent 10.6 Security Update 2012-004, where, if Mail had been moved out of /Applications or to some sub-folder within /Applications, the update couldn't locate it and Mail was, consequently, effectively disabled.
Please see
https://discussions.apple.com/thread/4311280?tstart=0

Can access Yahoo, but can't open Yahoo Mail in Firefox. Can on Internet explorer.

Can access Yahoo, but Can't open Yahoo Mail in Firefox. Can open Yahoo Mail on Internet Explorer. Checked Password.

PROBLEM: This is the error I get when I simply try to open an email in Firefox. File not found Firefox can't find the file at http://us.mg1.mail.yahoo.com/dc/blank.html?bn=555&.intl=us&.lang=en-US. * Check the file name for capitalization or other typing errors. * Check to see if the file was moved, renamed or deleted.
POSSIBLE SOLUTION:
I contacted Yahoo and they had me clear (1) cookies and (2) cache. This did work so that I can now open the emails in Firefox.
COMMENTS:
Yahoo support said "Please rest assured that Yahoo! Mail is properly working as of this time. It would be best if you contact Mozilla Firefox help support. They have the right tools and knowledge with the settings to access Internet Sites like Yahoo! Mail on Mozilla Firefox browser."
I'd like to know what to do to prevent this in the future because I've had this issue twice now in the last few weeks.

Can't Open Mac Mail after Recent Update

Last night I performed a software update and today I cannot open my mail application. When I do, I get the following error message:
You can’t use this version of Mail with this version of Mac OS X
You tried to open Mail version 4.5 (1084/1085) in:
/Applications/iWork '09/Mail.app
It can’t be used on this version of Mac OS X. Try opening the version of Mail located in the Applications folder on your computer. For more information, click the Help button.
When I try to open Mail from the applications folder as it instructs, I still get the same error message. I did notice that when I view the program in the preview window that it says Mail version 4.6 even though the error message says 4.5. I would suspect that has something to do with the problem, but that's as good at troubleshooting as I get. Does anyone know how to resolve this? Your feedback is greatly appreciated!
Thanks!

https://discussions.apple.com/thread/4319510
I downloaded this update
stamp is missing in my dock
can't find MAIL icon it is a new icon that looks different, and it still won't work
Safari was never moved
I didn't customize my folders, I don't know that much or how to
any advice?

Open in mail error

Similar Messages

Maybe you are looking for