Open in same window, when using simple finder window

When I am using finder windows in simplified mode (no sidebar) any folder I open, pops up a new window. Is it possible to have folders open in the same window?
Thanks

noondaywitch wrote:
Thanks for the correction ref. the opt key, Don. However I always have the finder selection unchecked and in icon view it still opens new windows…
Odd. When I check or uncheck that item in Finder Preferences, the resultant behavior is as expected in all folder view modes, including Icon view.

Similar Messages

How can I use terminal to make links open in same window the default behaviour, as it was in Safari 5.0, How can I use terminal to make links open in same window the default behaviour, as it was in Safari 5.0

In Lion, the default of pressing a link on a web page, is to open the page in a new tab. In itself, I do like this because this is what I did for 19 out of any 20 links, which I command+clicked in previous Safari versions.
However, there is a snag to this behaviour. Most (all?) secure site do not like links to be opened in a new tab. For example, when I am doing Web banking, The the linked page doesn’t open in new tab. Rather I get a page telling me my login session is expired. Probably a security measure instituted by my bank.
I since found out, that a command-click opens lings in the same window. Theoretically that solves the problem, if I would think about this all the time. I don't. Old habits die slowly.
Is there a terminal command to make links open in same window the default behaviour, as it was in Safari 5.0.

Hi Eric,
I got it figured out today, basically you have to load the Parallel Flash Loader first into FPGA ram. It is a special .sof file (pfl_epXXXX.sof) based on your FPGA. Code is actually pretty straight forward, using the Sys Exec VI. Use the windows based programmer to generate the .cdf file that identifies your FPGA, attached Flash and .pof file .
Syntax was odd going into Sys Exec. Note the extra "C" in in front of the "quartus_prm.exe" I have no idea why that was needed, but I was getting an error until I just happened to put it in there (Blind Luck :-))
I used a 2 element array going into a four loop
cmd /cquartus_pgm.exe -c USB-BLASTER -m JTAG -o P;pfl_epXXXX.sof
cmd /cquartus_pgm.exe -c USB-BLASTER -m JTAG S_FPGA.cdf
Defining the working director C:\altera\12.1sp1\qprogrammer\bin
And added match string with "Successfully performed operation" on the output in the loop to make sure everything loaded correctly then adding the array to give me a overall P/F
To anyone doing this same thing Altera's documentation is poor to say the least. It took most of a week to figure this out Not allowed to upload code, so anyone wanting details just post here and I will try to help. This was painful, with lots of lessons learned.
Thanks for the interest though
Best regards John

HTML and XML files open in same window(KM Navigation iView)

Hi All,
I have created a KM navigation which is pointing the folder inside the documents repository. This folder contains HTML and XML files. It is rendering fine. But, when I click on the file links in KM Navigation iView, it is opening in new window.Here I need to open in same window. How can I acheive this?. Please help me.
Thanks & Regards,
Venkatesh R

Hi ,
check the below thread and try options mentioned in it
https://www.sdn.sap.com/irj/sdn/thread?threadID=72594
Koti Reddy

XML Edit Form should open in Same window (Not a popup).

Hi all,
I have requirement to open the Edit form in Same window (Not a popup).
Assign the NewsExplorer Layout the user has edit and delete button. If the user edit the news it should not open in new window.while edit also should open in same window.
And while creating the news by using Xml form the EDIT form open in new window but i my requirement to open in same window.
Its possible? How to achieve this? Helpful replies will be appreciated.
Thanks and Regards
Thillai J

Not solved

Firefox won't open following update. Can't open Profile Mgr, even when using entire directory path in cmd line

I'm running Firefox on a Windows 7 machine. Firefox won't open following the latest update. I've read the help articles and it seems like I need to create a new profile because my settings have likely been corrupted. I'm unable to open Profile Mgr, even when using entire directory path in cmd line. I've tried the following commands in the command line:
firefox -p
"C:\Program Files (x86)\Mozilla Firefox\firefox.exe" -p
Nothing happens with either command.
I'm also running Norton Internet Security. I read a help article Re Virtual Browsing features possibly causing a problem. The article said to check the virtualization setting in the internet security software and to clear the virtual cache. I went thru all of the settings menus in Norton Internet Security version 21.6.0.32 and I didn't see anything that looked like 'virtualization" settings, so I assumed that this doesn't apply to me.
If you have any ideas, I'd sure appreaciate your expertise!!

''arcandl [[#question-1038482|said]]''
<blockquote>
I'm running Firefox on a Windows 7 machine. Firefox won't open following the latest update. I've read the help articles and it seems like I need to create a new profile because my settings have likely been corrupted. I'm unable to open Profile Mgr, even when using entire directory path in cmd line. I've tried the following commands in the command line:
firefox -p
"C:\Program Files (x86)\Mozilla Firefox\firefox.exe" -p
Nothing happens with either command.
I'm also running Norton Internet Security. I read a help article Re Virtual Browsing features possibly causing a problem. The article said to check the virtualization setting in the internet security software and to clear the virtual cache. I went thru all of the settings menus in Norton Internet Security version 21.6.0.32 and I didn't see anything that looked like 'virtualization" settings, so I assumed that this doesn't apply to me.
If you have any ideas, I'd sure appreaciate your expertise!!
</blockquote>
''philipp [[#answer-670108|said]]''
<blockquote>
hello arcandl, when firefox isn't launching after you double-click on the shortcut this is sometimes also a sign of malware being active on a system.
you might want to try running a scan with some different other security tools like the [http://www.malwarebytes.org/products/malwarebytes_free free version of malwarebytes] and [http://www.bleepingcomputer.com/download/adwcleaner/ adwcleaner] which are specialised in removing adware and browser hijackers.
[[Troubleshoot Firefox issues caused by malware]]
</blockquote>
Phillip - You're a genius!!! I ran malwarebytes and it resolved my problem. Thank you so much!!!

Where is my Mac App. I purchased a MacBook Pro about two years ago while in Okinawa. I recently moved to St Louis. When using the "find my Mac" app, it still says my Mac is located in Okinawa. How do I get it to recognize that it is now in St. Louis?

I purchased my MacBook Pro 2 years ago in Okinawa. I recently moved to St Louis. When using the "find my Mac" App, it still says my Mac is in Okinawa. How do I get it to accurately show my Mac is now in St Louis?

Open System Preferences using the menu item " > System Preferences" then select the "Security & Privacy" pane. selec the "Location Services" on the left and enable using the checkbox:
Just noticed you details show you are running OS X 10.7.5 so I am not sure this is exactly correct.

Connecting to a local server using simple finder

I am switching all my iMacs to OSX v10.2. I was told that it would run better for me than OS 9.2.
When setting up user capabilities for my students, I am having some troubles. One, if I set it up where my students can view only applications that I want, they do not always appear under the student login.
If I set it up where my students can only use simple finder and view an applications folder, then they lose the capability to see the local network servers.
Is there anyway to set it up for users to still use a local network server when only using Simple Finder capabilities?
If anyone could please help, it would be greatly appreciate.
Thanks,
Steve

Check
1.connect to db using remote desktop
2.check v$session for info
3.Terminate the desktop connection
4. check the v$session view

Menubuilder- Open in Same Window?

I have the advanced link setting for my links as "Open in
same window." The links continue to open in new windows. Is this
feature not desinged to launch the files in the same window as the
menu. Please help. Thanks.

Hi MissDona
I'm going to say "it depends". Normally, this is the default
behavior. But it likely will depend on the output type you are
creating. For example (and I'm somewhat assuming you fall into this
category) if you create .EXE output from MenuBuilder, a new
instance or window always opens, as MenuBuilder packages up the
Flash Player inside the .EXE. Thus, this version of the player runs
from a temporary location and has no clue about other movies and
whatnot.
Cheers... Rick

Several of us have a iPhone 6s and are having trouble with hearing and speaking at the same time when using the phone. ? The speakers seem to be too far apart? Are others having this issue? Solutions?

Several of us have a iPhone 6plus and are having trouble with hearing and speaking at the same time when using the phone. ? The speakers seem to be too far apart? Are others having this issue? Solutions?

Not having the problem, don't personally know anyone who is.

TS2570 doesn't work, still the same problem when using Rapidweaver software. NOT with other software.

i tried everything in this article, but still have the same problem when using Rapidweaver software. NOT with other software. I am converting my iWeb site to Rapidweaver, whenever there is a calmer period in my office. I have 16 Gb RAM on my NEW iMac and have Parallels desktop, mail, safari, iWeb and Rapidweaver running simultanious.
I never have the problem if i don't use Rapidweaver, but after i have added several pages to Rapidweaver, the problem begins. my iMac won't start up. the only thing that works is re-installing Macos OS X 10.8. i tried even whiping the completeharddrive, and reinstalling with a complete new user, the same problem.
I had it on my previous iMac also, and bought a new one because i thought the problem was in the iMac first. i hadn't noticed it only happens with using rapidweaver.
i sent my complete rapidweaver project to the programmers from rapidweaver at Realmacsoftware, but they couldnt reproduce my problem, there macs started up without any problem.
i deleted all the rapidweaver addons and extra stacks, and started a complete new project.
saterday i had the problem again, after adding about 5 new pages to my rapidweaver site.
i think i have reinstalled Macos OS X 10.8.2 20 or 30 times by now
does anyone have a sollution?

Type '''about:support''' in the URL bar and hit Enter.
Scroll down almost to the bottom of that listing and see if you have '''user.js Preferences''' just above the '''''Graphics''''' category.
If you do have that, click on '''user.js file''' in this sentence. <br />
''Your profile folder contains a user.js file, which includes preferences that were not created by Firefox.''
Does that "different homepage" appear in that user.js file?

How to open document from mac when using windows without transferring the file?

How can i open a document from mac when i am using windows without transferring it?

depend on the document program more then anything else really
when ever I open a doc with word it make a history for undo and redo action file in the same dir
with bootcamp you only have read not write access to the osx partition so it would fail to be able to create that file
but if you can get word or whatever program you use to open the file not to place a temp file in the same dir
or use a program which did not make any type of temp file or used a program where the temp file would be located elsewhere where you decide it would work file

New window opens in main monitor when using dual screen

I am using dual screens and my "main screen" is on the left. Ever since Firefox updated to 32.0.1 on Monday I've been having this issue. Before the update, I would have my main Firefox window opened on the left and, when I click on a link to open a new window, it would open on the right screen. Now, it will only open on the left screen, where the other window is. If I drag the original window to the right monitor and open a link, the new window will open on the right monitor. But once I drag the original window back to the left, new links will open in the left again.
Before if I had this problem, I would simply drag the new window to the right monitor, then back to the left and close it. Then click the link again and it would open in the right. Kind of a work around I guess. But since the update, even this will not work. Any suggestions? Or is this a new function of the updated version? Is there a way for me to go back to the previous version? Any help is appreciated!

Hi hollytotheg,
I understand that links opening in new windows are opening in the active screen, not on the right, second monitor.
This may be helpful: [https://addons.mozilla.org/en-US/firefox/addon/monitor-master/] the search recommends this.
However I would also recommend suggesting an enhancement in input about dual monitor new window restriction.

Forcing the opendoc call to open in the same page when using web elements

Hi,
I'm using the WE Submit web element to send an opendoc call to BOE, I'm calling the same report and re-running with new search criteria.
Is there a way to force the report to open in the same viewer as opposed to opening a new window?
Thanks in advance,
Angela.

hello Angela,
i assume that you're using a WETargetPath function along with the submit. normally the submit function should then open the report in the same window.
for example, if your report has an ID of 12134, then the following code should open the same report in the same window
stringvar path:= WETargetPath ("rpt", "ID", "12134", "");
WESubmit ("S1", "Button", "GO", path, '')
you can also use the last parameter in the WETargetPath to specify a location...using "Same" will force opening in the same window, while "New" will force a new window.
stringvar path:= WETargetPath ("rpt", "ID", "12134", "weWindow=Same");
WESubmit ("S1", "Button", "GO", path, '')
If you've downloaded the latest version of webelements from [here|http://www.sdn.sap.com/irj/boc/webelements] there's a "submit methods" report in the download that you can publish and have a look at the various options.
cheers,
jamie

How to replace LOV popup with a search screen that opens within same window

Hi,
We have a requirement to get rid of LOV popups from our custom OA pages. They need to be replaced by search pages that open within the same window.
For example, we are creating an employee assignment to a department. We first find the employee (currently using the LOV), then the department (currently using another LOV) and then save the new assignmnet record.
The two options we have are:
1. search page fully replaces the current page, and when the user has selected a record, it returns them back to the first page, setting some fields, eg. employee id, employee name, employee address fields.
2. search page opens in a region of the same page (PPR?) and then disappears once the user has seleted a record.
I am not sure how to do this, and really could do with some pointers, i.e. the best way to achieve this.
Thanks in advance
Mark

Both of your options are valid with some pros and cons.
option 1: It gives you a nice interface but then you will have a pass a large number of data back to 1st page.
options 2: You can use the Rendered property of a serach region at runtime and achieve your goal. Since it will be a single page, result set to base items mapping will be easier. Though this kind of UI will look bad if your search region is big.
So it all depends on which option is easier to implement for you.
--Shiv

JS Grid hyperlink in new window , how to open in same window

I am using JS grid in our project server application. I have a JS grid with a hyperlink and on clicking the hyperlink it navigates to a reporting list present on the same site . My problem is when we click on the hyperlink page it opens a
new window instaed of this behaviour i want to open it in same window. JS grid hhyperlink column has only two properties Display and Address. While on the project center page in Project server when we click on any project it opens the project site
in the same window.
dr["Hyperlink"] =
newHyperlink()
{ Display = "Contoso",
Address = "http://devpwa2010/pwa/projects.aspx"}

If the CSV files are send as text/plain like in this case then Firefox will open them in a tab instead of offering to download and save the files.<br />
Hold down the Alt key and left-click the links to get a download dialog or use the right-click context menu to save the file.

Open in same window, when using simple finder window

Similar Messages

Maybe you are looking for