"Open in Smart View" option. Hyperion Planning version 11.1.1.3

Failure to download planning form to Smart View using the "Open in Smart View" option. Hyperion Planning version 11.1.1.3. Error message "Web launch operation has been cancelled.
Your feedback is appreciated.

I understand you are on 11.1.1.3.
However, this is documented in the Known Issues section of the Smart View 11.1.2.1 readme and could be worth a try: 
When you try to open a Planning web form in Smart View through Workspace, you may get this error: “Web launch operation has been cancelled.” This happens if Essbase has not been added as a server in Shared Connections. Workaround: Open the Smart View Panel in Smart View and add an Essbase server as described in the online help or "Adding Essbase Servers" in chapter 2 of the Smart View User's Guide. 
HTH-
Jasmine.

Similar Messages

  • Configuration file for smart view for Hyperion planning

    Hi,
    We are using SmartView for accessing HyperionPlanning application. Please let me know how can we change the provider to use shared services and enable planning it for logging to file. Also which properties file is used for these configurations and where can we locate the configuration file on Hyperion planning installation system.
    Please suggest.
    Thanks
    Edited by: user11189447 on Aug 12, 2010 8:17 AM

    Hi,
    Checkout the below metalink from Oracle.
    Hyperion Strategic Finance Will Not Connect Via SmartView (Doc ID 1561484.1)
    Below Solution  as per doc ---
    1. Run the installation for the HSF Web Application component on the Foundation server where weblogic is for HSF Server.
    (Be sure the HSF Web Application component is also installed on the the HSF Server, if separate from the Foundation server as well.)
    2. Clean up any failed deployments in the WebLogic Console by deleting the HSFWeb Server from WL Admn
    3. Configure the new component on Foundation (target server).
    4. On OHS server run configtool and perform the WebServer config task to configure OHS for HSFweb
    5. Restart OHS and start HSFWeb
    Thanks,
    ~KKT~

  • Open in Smart View option not working.

    Hey there,
    We have been having this problem for a few days now,
    We have Hyperion 11.1.1.3 on a UNIX Server,and when users try to open a planning data form using the "Open In SmartView" it never opens.
    All that it says is "Windows is trying to run some services do you want to wait?"
    The OS that's on the users systems is Windows 7 and the browser is IE8
    Please let me know if some one have a fix to this..
    Thanks

    It is likely protected mode in IE. As a work around you can disable protected mode and try it. This a know bug that will be addressed in a future release.

  • Smart View Options Window

    Hi,
    On some of our computers it takes up to ten seconds if we open the Smart View Options Window. On other maschines it opens immediatly. Do you have any idea?
    It occurs on Version 11.1.2.1 and 11.1.2.2
    thanks and best regards
    Oliver

    We have had some compatibility issues with certain Excel add-ins and the Smart View add-in on various machines and now advise users to disable any other add-ins when using SV....so this could be the case with you (although ours are generally stability issues rather than performance issues as you have reported.)
    I guess the only way of knowing for sure is to disable all other add-ins and check performance. You can then re-introduce each add-in and see if you can identify the problem one.
    Thanks
    JB

  • SmartView does not open when I click on File – Open in Smart View

    SmartView does not open when I click on File – Open in Smart View.Can one please help me to resolve this issue.

    Are you using IE or Firefox? Which version of Planning do you have?
    HTH-
    Jasmine.

  • Hyperion Planning Version with Windows 7?

    Any ideas/experience as to whether Hyperion Planning Version 11.1.2 will work with Hyperion Essbase System 9 running on a Windows 7 machine? I know from experience that trying to run Essbase 11 on Windows 7 was a waste of time.

    If you are talking about the server side products then I would stick to supported operating systems, windows 7 is ony supported for client elements.
    Cheers
    John
    http://john-goodwin.blogspot.com/

  • Loading Smart List to Hyperion Planning 11.1.2.0

    Hi !! I am new to Hyperion Planning. I need to upload the SmartList into Hyperion Planning using Outline load utility. Could you please show me the steps.
    I just need some sample metadata may be two or three line of metadata that will give me idea to generate our metadata file..
    I have created outline utility syntex .. .please guide me....
    any help from you would really appreciated...

    Dear John
    Please help to load the smartlist, I am getting the following error.
    Successfully located and opened input file "d:\smartlist_create1.csv".
    Header record fields: SmartList Name, Operation, Label, Display Order, Missing Label, Data Form Setting, Entry ID, Entry Name, Entry Label
    Located and using "HSP_SMARTLISTS" dimension for loading data in "acpt" application.
    Parent-child ordering option (/H switch) will not be performed: this option is not available for the "HSP_SMARTLISTS" dimension.
    Input file member load ordering option (/O switch) will not be performed: this option is not available for the "HSP_SMARTLISTS" dimension.
    Unable to obtain dimension information and/or perform a data load: Unrecognized column header value(s), refer to previous messages. (Note: column header values are case sensitive.)
    Examine the Essbase log files for status if Essbase data was loaded.
    Planning Outline data store load process finished with exceptions: not all input records were read due to errors (or an empty input file). 0 data records were read, 0 data records were processed, 0 were successfully loaded, 0 were rejected.
    Unrecognized column header value "Data Form Setting".
    Unable to obtain dimension information and/or perform a data load: Unrecognized column header value(s), refer to previous messages. (Note: column header values are case sensitive.)
    Planning Outline data store load process finished with exceptions: not all input records were read due to errors (or an empty input file). 0 data records were read, 0 data records were processed, 0 were successfully loaded, 0 were rejected.
    I have used the same structure as provided in your earlier thread.
    OutlineLoad /A:acpt /U:admin /M /I:d:/smartlist_create1.csv /DS:HSP_SMARTLISTS /L:c:/OutlineLogs/outlineLoad.log /X:c:/OutlineLogs/outlineLoad.exc
    SmartList Name, Operation, Label, Display Order, Missing Label, Data Form Setting, Entry ID, Entry Name, Entry Label
    SL1,addsmartlist,SL1Label,,,,,,
    SL1,addEntry,,,,,,entry1,entrylabel1
    SL1,addEntry,,,,,,entry2,entrylabel2
    PLEASE HELP.
    Regards
    Sim
    Edited by: SimT on May 14, 2012 7:22 PM

  • Can't open form and dimension on Hyperion Planning

    Hi,
    I am working on Hyperion version 11.1.1.3 on my client's environment (Microsoft Windows Server 2003).
    There are two servers: one is for database and essbase, the other one is for reporting, foundation, and Planning.
    Since a month ago this customer experiences this problem:
    when login using admin user to Hyperion Planning (port 19000 and 8300 both can be used), the menu on the top is loaded but the rest are blank.
    I tried to open form by using the left menu but also doesn't work, still blank. I also managed to try open the dimension, it also can't be loaded
    restarted service and server also done, but doesn't work as well.
    nb: this error only occurs on admin id, I tried to create another user account and give the same provision with admin, the id works well, no problem and no blank case.
    anyone could please advice what happened and solution, I give my thanks to you.

    Hi Rahul,
    thanks for your reply. I couldn't find the table you mentioned.
    In my planning table schema, there are:
    - HSPSYS_ACTION
    - HSPSYS_APP_CLUSTER_DTL
    - HSPSYS_APPLICATION
    - HSPSYS_CLUSTER
    - HSPSYS_DATASOURCE
    - HSPSYS_PI_INFO
    - HSPSYS_PROPERTIES
    which one contains the value that you mentioned above?
    many thanks.

  • Smart View - Options - Member Options - RadioButton "Top" or "Bottom"

    Hello
    I have installed Essbase 11.1.2 and am using Smart View with Excel 2007.
    I would like to see Totals first and then on drill down get the details underneath of my total (instead of above my total, which is the default behaviour).
    Under Options -> Member Options -> select Enterprise -> we can set the radio button from "Bottom" to "Top". Has anyone tried this already? Does it work for you?

    Thomas, I actually just found out a way to show the Totals first. If you set up a SmartSlice you can choose in your options where you want your Ancestor to show up. You can choose to have it show up at the bottom of your detail or at the top. Hope this helps.

  • Planning form not opening at Smart View through Workspace

    Hi Gurus,
            I have an 11.1.2.3 environment and I'm trying to open up a Planning form inside Workspace using the following steps : File --> Open in SmartView.
            Right after Excel shows up I've got the following error message :
       "The form /Forms/00 - Income Taxes/MPP1001.00 - Exchange rate  is invalid. Verify the log to obtain more details."
           However, I've got to open up this same form directly into SmartView without error.
          Did someone have this issue before ? Do I have to apply some SmartView Patch ?
    Thanks in advance.
    Regards

    Hi,
         My SmartView version is 11.1.2.3.300 (build 157)
    Thanks

  • Loading Smart List in Hyperion Planning

    Dear Gurus
    Please help to load the smartlist, I am getting the following error.
    Successfully located and opened input file "d:\smartlist_create1.csv".
    Header record fields: SmartList Name, Operation, Label, Display Order, Missing Label, Data Form Setting, Entry ID, Entry Name, Entry Label
    Located and using "HSP_SMARTLISTS" dimension for loading data in "acpt" application.
    Parent-child ordering option (/H switch) will not be performed: this option is not available for the "HSP_SMARTLISTS" dimension.
    Input file member load ordering option (/O switch) will not be performed: this option is not available for the "HSP_SMARTLISTS" dimension.
    Unable to obtain dimension information and/or perform a data load: Unrecognized column header value(s), refer to previous messages. (Note: column header values are case sensitive.)
    Examine the Essbase log files for status if Essbase data was loaded.
    Planning Outline data store load process finished with exceptions: not all input records were read due to errors (or an empty input file). 0 data records were read, 0 data records were processed, 0 were successfully loaded, 0 were rejected.
    Unrecognized column header value "Data Form Setting".
    Unable to obtain dimension information and/or perform a data load: Unrecognized column header value(s), refer to previous messages. (Note: column header values are case sensitive.)
    Planning Outline data store load process finished with exceptions: not all input records were read due to errors (or an empty input file). 0 data records were read, 0 data records were processed, 0 were successfully loaded, 0 were rejected.
    I have used the same structure as provided in your earlier thread.
    OutlineLoad /A:acpt /U:admin /M /I:d:/smartlist_create1.csv /DS:HSP_SMARTLISTS /L:c:/OutlineLogs/outlineLoad.log /X:c:/OutlineLogs/outlineLoad.exc
    SmartList Name, Operation, Label, Display Order, Missing Label, Data Form Setting, Entry ID, Entry Name, Entry Label
    SL1,addsmartlist,SL1Label,,,,,,
    SL1,addEntry,,,,,,entry1,entrylabel1
    SL1,addEntry,,,,,,entry2,entrylabel2
    PLEASE HELP.
    Regards
    Sim

    First step: finding the right forum for your questions.
    http://forums.oracle.com/forums/category.jspa?categoryID=146

  • How do I add desktop view option to mobile version

    I have a website with a desktop & mobile version. I would like to add an option to the mobile version to view the desktop version on their phone and then a way for them to get back to their mobile version. What's the best way to do this. I tried this using hyperlinks but found that after viewing the desktop on my phone it stayed on desktop view after returning to the mobile platform. Do I just add a hyperlink to the desktop version to get back to the mobile version?

    The thread here shall be helpful - http://forums.adobe.com/message/5147694

  • IE8 and new Hyperion Planning version

    I have just been told that the new version 11.1.2 will support Windows & and IE8. Has anyone else heard this?

    That is what I've been told in the past is IE8 will be supported on the desktop. Supposedly Server 2008 will be supported and I would guess SQL Server 2008 would be supported as well.
    I was also told that the initial release of 11.1.2 was going to be recommended only for fresh installations and a later service pack would be released for migrations/upgrades.
    Obviously until it's really released things slip in/out/change depending a formal release management process.
    Regards,
    John A. Booth
    http://www.metavero.com

  • Hyperion Planning Smart View issue with Member Names & Aliases

    Hi,
    Im using Smart View "Essbase" Connection to a Hyperion Planning Application, ver 11.1.1.3, however with the essbase connection i am not able to select at the smart view options to see aliases, members or both. I change the setting ( Duplicate member names allowed =true) directly at the properties of the outline in EAS, and now i am able to see the aliases, however if time I refresh using web planning/workspace this setting is undone. Furthermore i dont thing i should use it with planning. Any comments?
    Kind Regards

    First of all I hope you have not changed the properties of the outline in EAS for a planning application.
    For more information on using aliases in smartview have a read of :- Smartview --- Display options --- to display alias names
    Also you will only be able to view member name or aliases not both at the same time.
    Cheers
    John
    http://john-goodwin.blogspot.com/

  • Smart View error when opening Powerpoint files read-only

    Users are experiencing the following error when they open a Powerpoint file as read only. Using MS Office 2007 with Hyperion 11.1.2.1 Doesn't happen in edit mode. Error reappears every time user pages down to next slide. Quite annoying!
    Shape. Tags : Invalid request. Presentations cannot be modified.
    Has anyone experienced this issue and resolved it?
    Thanks,

    Source: My oracle support
    =============================================================================================================================
    Applies to:
    Hyperion Planning - Version: 11.1.2.1.000 and later [Release: 11.1 and later ]
    Information in this document applies to any platform.
    Symptoms
    In Smart View Version 11.1.2.1.000, when attempting to open a PowerPoint document that is already open by other user the following error occurs:
    ERROR : Shape.Tags: Invalid Request. Presentation cannot be modified.
    Cause
    This issue has been verified as Unpublished Bug 12418027: SMART VIEW ERROR : SHAPE.TAGS : INVALID REQUEST. PRESENTATION CANNOT BE MODIFIED
    The cause of the problem is that when a presentation is edited by another user, an exception will be thrown while trying to query the tags in the presentation from a different process.
    Solution
    This issue has been fixed in the Oracle Hyperion Smart View for Office, Release 11.1.2.0.000 Patch Set 1 (PS1): 11.1.2.1.102 Release.
    This patch is available via My Oracle Support:
    1. Log into the My Oracle Support portal.
    2. Choose the Patches & Updates tab.
    3. Enter the Patch Name or Number from the drop-down box.
    4. Perform a search for Patch:12968304 for your corresponding OS platform.
    5. The patch file includes both installers and the readme.
    Additional Information:
    Please refer to the patch readme for system requirements, dependencies, and installation instructions.

Maybe you are looking for

  • Create a personnal number in PA40

    Hi all,, In PA40 tcode we have personnel number(RP50G-PERNR)..so that number is unique...and in LFB1 table we have LIFNR and PERNR(Personnel Number) how are they linked... my problem is whenever a user creates a personnel number in PA40..it should be

  • Make my directory as FTP

    Hi,               My scenario is File to File. The sender communication channel has to pick the file from my local desk top. I configured sender communication channel as a FTP. Now how can I make my local desk top as a FTP folder

  • Been asked for passwords at start up constantly

    Been asked for passwords at start up constantly, i only changed my password once and now i can not even get into my keychains to see previous passwords. anyone have this problem, pelase let me know what to do about it.

  • Submit program RHGRENZ0

    Hi All, I am getting a Run time error in case of data issue while using Submit Program RHGRENZ0(to delimit the objects )  in production server. I would like to use TRY/ENDTRY and use catch cx_root exception. Will that Catch the Data issue in future.

  • Cannot run Creative Cloud apps on Win 8.1

    I have installed Indesign and Photoshop apps (trail version) in Windows 8.1 but cannot start either apps. I have 8GB RAM. What is the issue? Thanks.