Open InDesign 2.0 file in the CS5

I have a InDesign 2.0 file. When I open with CS5 version, the application warning the following: "Cannot open 'File.indd'. Please upgrade your plug-ins to their latest version, or upgrade to the latest version of Adobe InDesign."
Also the dialog box shows the item "EPS PAGE ITEM.RLPN".
How fix this? How I can to open a InDesign 2.0 file again?

Do you still have version 2.0 (which is not the same as CS2, so maybe we should calrify just what the original file is)? Will it open in the original?
If it is, in fact a version 2.0 file and will not open in version 2.0 you have a real problem and the only hope I know of would be to send it to Markzware: Fix Your Bad InDesign Files!
If you want to zip the file and send it to me, I'll have a go at opening it in a few hours, but I can't promise anything.

Similar Messages

  • Can I open Indesign 2.0 files with cs6 or the newest version of cc?

    I want to buy either cs6 or the newest version of cc.  I just need to know if I can open InDesign 2.0 files with either of these newer versions?

    In theory, yes, but it's hard to predict what's going to happen with that big a gap in versions. I suggest you download a trial and give it a test, and if the file opens, the very first thing you should do is save as .idml. then open that and save as a new .indd without overwriting the original.

  • Cannot open Nikon D4 NEF files in Photoshop CS5

    Cannot open Nikon D4 NEF files in Photoshop CS5 and Camera Raw 6.6 … any suggestions?

    Thanks for your reply
    .... strange? in the document you mention above the Nikon D4 is not mentioned as being newly supported and yet when I went to get info about this:
    http://www.adobe.com/products/photoshop/extend.html
    It says that the D4 should be OK in Camera Raw 6.6.
    I confess to being slightly confused.

  • Open Flash CC 2014 file in Flash CS5 (was: hello)

    is there anyway to open flash cc 2014 file in flash cs5 and work on the files

    Flash CS5.5 lets you open any newer file. But you can save down to older versions (back to CS5) with CS6 if you have access to it. Flash CC does not give you the option to save down.

  • Issue opening or creating new files in illustrator CS5 windows 7 64bit, "Not Responding"

    Issue opening or creating new files in illustrator CS5 windows 7 64bit, program becomes "Not Responding" when opening a file.
    I had recently tried a trial version of FontExplorer Pro X, and this issue has come up after the Uninstallation of that program.  Any suggestions?

    Check for ant third party plugin in the plugin folder....?
    Also Check in the new user account?
    Message was edited by: Manish_1988

  • How do I change the default folder that opens when uploading a file to the internet from my mac? (at the moment it automatically defaults to 'Downloads' folder)

    How do I change the default folder that opens when uploading a file to the internet from my mac? (at the moment it automatically defaults to 'Downloads' folder)
    For example...
    I am on a webiste and wish to upload a photo.
    I click on select file on the website
    Finder opens and defaults to 'Downloads' folder (it happens with all wesbites)
    How do I change this?

    I am on a webiste and wish to upload a photo.
    I click on select file on the website
    You are attempting to download the picture to your computer not uploading photo to the website if I am understanding you correctly.
    To change the download direction, you must do so through your browser's Preferences.  If you are using Safari, hopefully, someone who uses Safari will help you and/or post over in their forums.  I do not use Safari.
    If using Firefox>Preferences>General>Save Files to:

  • I have just upgraded to OSX 10.6.8 and now I cannot open or save PDF files from the internet. I get a dialogue box saying the QuickTime plugin has failed. I have tried to download the latest plugin but this doesn't work. Can anyone help?

    I have just upgraded to OSX 10.6.8 and now I cannot open or save PDF files from the internet using either Safari or Firefox. I get a dialogue box saying the QuickTime plugin has failed. Can anyone help?

    Is this what you downloaded: iTunes 10.7?
    When the update fails what if any error report do you get, specifically? Please do this before trying again:
    Repair the Hard Drive and Permissions
    Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
    If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.

  • I want to open a domain.site2 file outside the default folder (User/Library/Application Support/iWeb) with iWeb11, but iWeb only opens the domain file in the default folder. If I delete the default domain file, iWeb wants to create a new site. Help please

    I want to open a domain.site2 file outside the default folder (User/Library/Application Support/iWeb) with iWeb11, but iWeb only opens the domain file in the default folder. If I delete the default domain file, iWeb wants to create a new site. Does anyone have the same problem or know how to fix it?

    In Lion the Finder folder is now invisible.  To make it permanetely visible enter the following in the Terminal applicaiton window: chflags nohidden ~/Library and hit the Enter button - 10.7: Un-hide the User Library folder.
    For opening your domain file in Lion for the first time or to switch between multiple domain files  Cyclosaurus has provided us with the following script that you can make into an Applescript application with Script Editor. Open Script Editor, copy and paste the script below into Script Editor's window and save as an applicaiton.
    Just launch the applicaiton, find and select the domain file you want to open and it will open with iWeb. It modifies the iWeb preference file each time it's launched so one can switch between domain files.
    do shell script "/usr/bin/defaults write com.apple.iWeb iWebDefaultsDocumentPath -boolean no"delay 1
    tell application "iWeb" to activate
    OT

  • Whenever I open the editor in Photoshop Elements 12 it does not work. When I try to click open in the application it does not do anything. None of the buttons work. When I open a photo using file at the top it opens but I cannot edit it or use any of the

    Whenever I open the editor in Photoshop Elements 12 it does not work. When I try to click open in the application it does not do anything. None of the buttons work. When I open a photo using file at the top it opens but I cannot edit it or use any of the features on the left side.

    Hi Nealeh
    Thanks i think I got it working of a fashion.
    Except the replace colour, does not seem to end up with the colour I picked using the picker tool. Its as though it hads not replaced the colour but blended in the desired colour with the old incorrect colour!
    Buy trial and error picking not the right colour but close - which when mixed with the existing colour is close.
    Sorry I can't post the pictures as the Lingerie Mfg, has me under non disclosure.
    The scenario is:-  say a blonded mainly tanned model a high cut [at the hips] corsette style basque, with an ultra low bra line.
    Our dear model, has just come back from St Barts with a fabulous Tan, and equally striking bold Tan lines!.
    So we have great tanned legs, then the 'porcelain white band' where her swimsuit was.
    Likewise we have a tanned face, and arms, shoulders etc and a great tan on the top of the cleavage, then it stops, white band to the top of the ultralow cut bra line of the basque.
    She must have lived in like the most conservative bikini on the planet [50's style], for 2 weeks!
    Had she had a normal skimpy bikini on, no problem!
    If i don't solve it, she will get fired!
    Not a lack of interest in your post, but I was out, and tried to log in to this site; which I could do, on my iPad Air / 5 [whatever its the new one]. And tried to 'sign in' - but it just hung at the
    "Join Adobe Community" adobe sign in splash screen! with he little whell spinning around continuously!!!
    I have Safari on this iPad. Guess that is all it runs.
    So technology is not my friend today!

  • HT3825 I can't open Nikon D7000 raw files in Photoshop CS5.  Any ideas how to do it

    I can't open Nikon D7000 raw files in Photoshop CS5.  Any ideas how to do it

    This page might help.
    Note that your question does not relate to Apple software nor hardware.

  • I previously had PS CS5 Trial installed but removed it using both Control Panel Programs and deleting all files from the CS5 directory on Program Files.  I then installed a purchased product from Adobe disc using the serial number on the case.  But when I

    I previously had PS CS5 Trial installed but removed it using both Control Panel Programs and deleting all files from the CS5 directory on Program Files.  I then installed a purchased product from Adobe disc using the serial number on the case.  But when I try to launch it, I get a screen headed Photoshop CS5 Extended Trial.  It asks for the serial number and says that my trial has expired.  It rejects the serial number from the Adobe case saying "This Serial Number is not valid for this product".  It thinks that I still have the expired Trial Version installed.  How do I convince it (the program) that the Trial Version is long gone and the currently installed product was installed with a valid and accepted serial number????

    Let me know how it goes. Go into your Adobe account and register your serial number asap.
    https://www.adobe.com/account/my-products-services.html
    That way, should you lose it or you need support, it is on record that it's yours and you can fetch your s/n it from anywhere.
    There are too may sad stories here, where people forgot and the box is buried or lost.
    Gene

  • Opening InDesign 2.02 Files in IDCS3

    Has anyone encountered any issues opening historic InDesign 2.02 files in IDCS3
    Is there a list of conversion issues posted anywhere on the site.
    Many Thanks
    Steve

    Hi Bob
    When changing the font size in the top toolbar menu, if you type the font size in and hit return the value is ignored. If you leave the font size value highlighted/selected for more than a couple of seconds it deselects the value and when you type it replaces the text you have selected in the InDesign document. This also happens in the horizontal scale box. If you use the pull down menu it works fine.Just seems very buggy. I have recreated the scenario by taking the Indesign 2.02 documents to another location and the same problem is encountered. I would be happy to e-mail ftp them to see the problem.
    Regards
    Steve

  • InDesign 5.5 file conversion to CS5

    Sorry for the inconvenience to you all. Could somebody help me converting An InDesign 5.5 file in InDesign CS5 if a place it in my dropbox? I get the missing plg-ins pop up window. It is very important. Thank you so much. Fokion

    Million thanks. The link is:
    https://www.dropbox.com/sh/1qo5grhy5vkbgc2/n8QRRAQPS1?m=

  • Can I open Photo Studio .psf files in Photoshop CS5

    should i be able to open photo studio files (.psf) in photoshop cs5? How?

    PSF is also an extension for color proof preset/ files in Photoshop.
    However, Photo Studio's PSF files may be opened in Photoshop if you change the extension to .JPG. However, you may be unable to use editing capabilities of the file.
    Do you have a Canon software where Arcsoft's Photostudio came bundled?

  • Can't open InDesign and PPT files by double-clicking on them IN A FOLDER

    PPT is MS Office 2004, all other MS programs ok. InDesign is CS4. Files are not corrupt, because they open on two more computers. The computer is brand new. I first installed Office, then CS4. The applications open, but the files don't open when I double-click on them IN A FOLDER. If I go to Open and select the file in the folder, then it opens. If I double-click on it IN A FOLDER, it doesn't open. I tried to do the Info panel thing, where you pick the program for the file, and that didn't work. Also, if I drag the file to the desktop, and double-click on it, it will open. A kind volunteer support person said there was an article about this in MACWorld in Dec. 2009, but I tried the suggestions and it still doesn't work. Basically, I need to use InDesign everyday for world, so this is a major problem.

    I have a client with a similar issue regarding InDesign CS4. When double-clicking InDesign files on the server, the InDesign application will launch but the document will not open. Opening the document using the Open command in the File menu in InDesign works fine. This issue does not occur in any other CS4 application. To further complicate the matter, another user at the same location running the same version of the Mac OS (10.6.2) and CS4 does not have this issue. I have tried a fresh install of Mac OS X 10.6.2 and CS4 but the issue persists. I have tried creating a new user account and using the authentication credentials of the user that doesn't have this issue to connect to the server on the problem computer but still the issue persists. Prior to doing the fresh install, I swapped the hard drives between the two computers, but the problem stayed with the hard drive, not the computer, which is what prompted me to perform the fresh install.
    Have you come across any new information?

Maybe you are looking for