Open Indesign files in photoshop

Hello, I use photoshop cs2. Are you able to open Indesign files in CS3? I am considering upgrading.
Shawn

No. As Ed states, they are two different programs with totally different uses.
Now, you can Place PS files (any version of PSD) into InDesign (or AI). I have had a very few problems with recent PSDs, without Compatibility checked NOT opening in InDesign. Folk tell me that this is not an issue between CS3 InDesign & PS, but I cannot check this.
Do your layout work in InDesign and your photo work in PS. Only other option would be, again as Ed states, use a PDF, but it will get rasterized in PS, and will not be easily editable.
Hunt

Similar Messages

  • Cant open Indesign files unless opening through Bridge

    We have just upgraded our PCs to CS5 & cannot open InDesign files unless we open them through Bridge, we have tried open with but this doesnt seem to work. Any suggestions? Illustrator & Photoshop are fine.

    Sounds like an issue where either the folder you opened the last file from conventionally is no longer available or you do not have sufficient permissions to access it. The info on the last used folders/ files is retained by the programs and if something goes astray, that can cause this behavior. In any case, trashing the prefs to get rid of the wrongly stored paths might be enough, so try that. Simply move the files in C:\Users\[Your Name]\AppData\Roaming\Adobe\InDesign\Version 7.0\en_US out of the way and let the program create new factory defaults.
    Mylenium

  • Switch Indesign file into Photoshop

    How do i transfer a indesign file into photoshop. i thought you used bridge to do something like this but im not sure? ive tried placing the indesign file into photoshop using bridge but it says the open options are incorrect. help?

    ive tried placing the indesign file into photoshop using bridge but it says the open options are incorrect.
    To my knowledge this is not possible, you can't place a .indd (InDesign file type) in PS nor open a InDesign document in PS because it does not support it. What you can do is the other way round, you can use Bridge to place a photoshop document or image in to an InDesign document. Most user do this via the MiniBridge panel in ID.

  • I can not open the file in Photoshop...

    I can not open the file in Photoshop after formattatto pc.
    I get the following error "could not complete your request because there is an error in the program
    Please me!
    Thank you

    Version CS3
    Adobe DNG Converter and Camera Raw 4.6 update
    6.2MB
    10/10/2008
    Camera Raw 4.6 update
    3.5MB
    10/10/2008
    Camera Raw 4.5 update
    3.5MB
    7/28/2008
    Adobe DNG Converter and Camera Raw 4.5 update
    6.1MB
    7/28/2008
    Adobe DNG Converter and Camera Raw 4.4.1 update
    5.4MB
    4/10/2008
    Camera Raw 4.4.1 update
    3.3MB
    4/10/2008
    Camera Raw 4.3.1 update
    3.3MB
    11/15/2007
    Adobe Photoshop 10.0.1 update for Adobe Photoshop CS3
    72.8MB
    11/15/2007
    Adobe DNG Converter and Camera Raw 4.3.1 update
    6.1MB
    11/15/2007
    Adobe DNG Converter and Camera Raw 4.2 update
    5.9MB
    9/13/2007
    Camera Raw 4.2 update
    3.2MB
    9/13/2007
    Camera Raw 4.1 update
    3.2MB
    5/30/2007
    Adobe DNG Converter and Camera Raw 4.1 update

  • I can't open .avi files in Photoshop CS5

    I used to be able to open .avi files in Photoshop just fine, but I’ve just tried opening one again after a couple of months and I can’t. It’s just black blankness. I have no problem with .mp4 files, but unfortunately, most of the videos I'm trying to make gifs out of are in .avi format.
    Is it because I've updated QuickTime? Or is it that Adobe CS no longer supports .avi files? It says here that Photoshop CS6 supports the .avi format.
    My specs:
    OS X Mavericks 10.9.4
    Photoshop CS5.1
    QuickTime Player 10.3

    I used to be able to open .avi files in Photoshop just fine, but I’ve just tried opening one again after a couple of months and I can’t. It’s just black blankness. I have no problem with .mp4 files, but unfortunately, most of the videos I'm trying to make gifs out of are in .avi format.
    Is it because I've updated QuickTime? Or is it that Adobe CS no longer supports .avi files? It says here that Photoshop CS6 supports the .avi format.
    My specs:
    OS X Mavericks 10.9.4
    Photoshop CS5.1
    QuickTime Player 10.3

  • Can't open CR2 files in photoshop and camera raw

    This weekend I rented a Canon 5D Mark iii. I have downloaded the files and all of the thumbnails in camera raw say CR2 and when I try to open Photoshop does not recognize this product.
    I have:
    Photoshop CS4
    Camera Raw CS4
    Canon 5D Mark ii
    I have checked my updates folder and all my updates are current. Do I need to upgrade to CS5 or is there a way around this?

    Hi I recently had a problem opening CR2 files in PHotoshop cs4. I had to reinstall into a new computer, so obviously it installed the basic programme and not the updates.
    After trying everything, even calling the help desk, there was apparently nothing that can be donw as they no longer support cs4.
    I kept trying and found a you tube video, which i cant find again to add the link but i followed the link and with what I did earlier I can now open CR2 files in my photoshop cs4
    I found the relevany update that I needed to install and downloaded it, camera raw 5.2 ( Adobe - Adobe Camera Raw and DNG Converter : For Windows : Camera Raw 5.2 update )  this is the one for the Canon 5d Mk2
    After downloading it would not update the progeramme so I was in the same possition, but i noticed the files were there and i just needed to put them in the right place in photoshop so carried on looking for were to put the Plus In.
    This led me to the video.
    To the point.
    Download the update and save to a location where you will remember.
    open Adobe photoshop and go to "edit"
    Them " Preferences "
    then "General "
    Then " Plus-Ins"
    At the top you will see " Add Plug-Ins Folder " Check this box then navigate to the "win64" ( this is because mine is a windows 64 bit computer and the download is specific ) and Choose it.
    Shut down photo shop and try to open a raw.
    Bridge doesnt work for some reason but im going to keep looking.
    Hope this works for you as well.

  • Can't Open any files in photoshop CS3

    I can not open any files in Photoshop CS3. It has been working fine. I was using camera raw and did not open the file and now can't open any file in photoshop. I reinstall it photoshop and it did not work. I reinstall install window xp worked fine until I tried camera raw. Canon (xti) Only cs3 is on the computer now

    reset the preferences per the faq?
    http://www.adobeforums.com/webx/.ef4a07f/1

  • Why is it when I go to open a file in Photoshop cc I get a "Could not complete your request because of a program error".  I have uninstalled and re-installed software,  It works for a short time then I get that error again when i go to open a file.  Thank

    @Why is it when I go to open a file in Photoshop cc I get a "Could not complete your request because of a program error".  I have uninstalled and re-installed software,  It works for a short time then I get that error again when i go to open a file.  Thank you!

    Without proper system information and other details like what files you work with  nobody can tell you much. From corrupted prefs to issues with your PS swap file to actual problems with the fiel storage this could be anything.
    Mylenium

  • Unable to open AVI files in Photoshop CS6

    Unable to open AVI files in Photoshop CS6
    I am running PS6 and want to open and edit AVI files. When I try to do that I get an error message saying "the video file cannot be opened" . This seems to apply to ALL avis - yet I can open and edit MP4, MMV etc. I installed Gspot to track whether it was a codec issue and when I try to open ANY file I get this error message : "Warning: DirectShow crashed while GSpot was attempting to obtain information about a codec.  This is usually due to damaged, misconfigured, conflicting, or poorly written codec drivers.  It is possible, perhaps even likely, that other media players will crash when they attempt to play this file as well, as most of them will also use DirectShow.  GSpot was able to intercept the crash, and has attempted to identify the codec or filter involved; uninstalling or reinstalling this codec or filter may solve the problem.  The codec was tentatively identified as:  C:\Windows\system32\imaadp32.acm Unknown video codec #11" I have NO idea where to go from here. I see a site to download the "imaadp32.acm"  codec but what about the "Unknown video codec #11". What the heck is that and what do I do about it. Any help would be appreciate, Cliff
    ps I should add that the avi files DO open and play in Bridge. I have the latest Quicktime. Everything is up to date and PS and the computer is otherwise working perfectly !

    Thanks Curt and 'Mylenium'
    I did re-set the prefs - but to no avail
    I checked and my graphics driver and audio is all up to date.
    No sure how to verify Windows Media Player's hardware acceleration options. I opened WMP Options /Perfformance tab and under Cd the DirX tab is checked.
    Running Windows Vista - so does the same caution apply regarding a re-install of Windows Media Components and DirectX ?
    Appreciate your help with this somewhat frustrating issue. I am converting some old 8mm film to avi with the hope of doing some edits then burning to DVD.
    Cliff

  • How do I write a javascript code to open InDesign File, import Doc, save and export to pdf?

    How do I write a javascript code to open InDesign File, import Doc, save and export to pdf?

    Hi hasvi,
    Need Template(.indt), textframes etc for the following script:
    var myFolderInd = Folder.selectDialog();
    var myFile = myFolderInd.getFiles("*indt");
    app.open(myFile)
    var myDoc = app.activeDocument;
    var myDocName = myDoc.name;
    var mySaveFile = app.activeDocument.save(myFolderInd.fsName + "/" + myDocName.split(".indt").join(".indd"));
    var myFolderDoc = Folder.selectDialog();
    var myFile1 = myFolderDoc.getFiles("*doc");
    mySaveFile.pages[0].textFrames[0].place(File(myFile1))
    //~ mySaveFile.place(File(myFile1))
    app.activeDocument.textPreferences.smartTextReflow = true;
    var myPDFFile = new File(mySaveFile.filePath + "/" + mySaveFile.name.split(".indd").join(".pdf"))
    myDoc.exportFile(ExportFormat.PDF_TYPE, File("~/Desktop/abc.pdf"));
    alert("Process Completed")
    Regards
    Siraj

  • Can i open eps file in photoshop element 12 and convert it into jpeg?

    can i open eps file in photoshop element 12 and convert it into jpeg?

    You can open it in Irfanview (free), then save as JPEG.
    Download the program here:
    IrfanView - Official Homepage - one of the most popular viewers worldwide

  • CS 3.0.1 will not open InDesign files created in 2008  - it says a plug-in may be missing.

    My CS 3.0.1 will not open InDesign files created in 2008.  It says a plug-in may be missing.  I did have a computer crash since I last opened it.  I've tried changing the extension to inx, but that doesn't work.  I cannot get the file to open.  Can someone help?

    The OP is using CS. He/she could be trying to open CS2 or later.
    Simply changing the file extension will do know good and only an INX exported from CS2 will work.
    Bob

  • Can't open PNG files in Photoshop CS5...??

    I'm seeing lots of threads with this problem but none of them seem to have an answer.
    For some reason right now when I try to open a PNG file in Photoshop it just crashes.  I end up with a neverending "hour glass".
    I had all of my website project directories on a network share.  As I'm no longer sharing all of these files with an office of people I decided to move all of these project files back to my own local machine.  Ever since I've done that I can't open PNG files in Photoshop anymore.
    Any information on what could have caused this, or more importantly, how to fix it would be greatly appreciated.  Thanks!

    I was able to edit PNG files just fine up until today, and the only thing I've done is move the files from the network share to my local hard drive.
    Any PNG, large or small won't work right now.  All of the other threads I see where people are talking about this say it's happening with their GIF files, too.  I just tried one here and the same thing happened.  From within Photoshop I did File -> Open, browsed to my image directory and the moment I clicked on one of the GIF files it locked up.
    So yeah, I'm certain it's isolated to my machine right now.  I just have no idea at all what could possibly be causing this.  The other threads are mentioning netework shares, too, but usually still trying to open over the network.  In my case it was working fine when I did it over the network, but now that I'm opening local files it's failing.

  • Can't open .NEF files in photoshop or RAW. Help!

    I was always able to open .NEF files in RAW when I had my old computer, but I just recently got a new computer and now I can't open them. Does anyone know how to change the settings so that I'm able to open these files in photoshop CS5 Extended/RAW?

    Try installing Camera Raw 6.7.1 manually
    Adobe - Adobe Camera Raw and DNG Converter : For Macintosh : Camera Raw 6.7.1 Update
    Adobe - Adobe Camera Raw and DNG Converter : For Windows : Camera Raw 6.7.1 Update

  • I can't open .WMF files in Photoshop 10, why?

    Why can't I open .WMF files in Photoshop 10?

    Welcome to the forum.
    Am I correct that you are referring to Adobe Photoshop Elements 10? Or, do you mean Adobe Photoshop CS3?
    While there are similarities between Ps and PsElements, there are some differences too. Knowing exactly which program you are using can be important.
    Also, and regardless of the program used, Trevor offers great advice above.
    Good luck, and let us know a bit more, please.
    Hunt

Maybe you are looking for

  • How to get the search criteria value in model

    Hi, I've a search page and one of the search item has BETWEEN operator. How can I get the values for this search criteria item in model project ie., inside the VOImpl.java? Thanks

  • I'm getting error message ":Unbalanced InstanceBegin tag"

    When I try to update my files from template it wont upadate and gives me error at line 1 ":Unbalanced InstanceBegin tag" It just started doing this. I'm using dreamweaver 8. I tried unistalling and reinstalling and page still didn't work. This is a s

  • Still image size for 16:9 video

    I want to crop and resize my images before bringing them in to PE10 on my iMac running lion. What pixel dimensions are best? The preview of my first image in the playback viewer is terrible. I used 1920 wide by 1080 high in my export settings for the

  • CR XIr2 Embedded deployment and servicing

    Hello all, We are a bit confused about how to deploy RAS XIr2 and service it. What service packs do we use to patch Crystal Reports XIr2 Embedded Server? The Crystal Report Server SPs are what we used for RAS 10, but those don't seem to work. I think

  • [SOLVED]Incorrect UUIDs

    I promise this isn't just another duplicate post like so many others from people who just start blindly posting when they have a problem. It's really not. I've searched thoroughly, and even found something of a solution to my original problem here on