Open Interface or Public/Private API for Blanket Release

Hi All,
I am on Oracle Apps 11.5.10.2
Is there any open interface available to import the blanket releases in Oracle system. I have searched the meta link and found the doc 160781.1. According to the document there has been a future enhancement request logged by Oracle for this functionality but I am interest if any one know about some private API available to do same job. I will also appreciate if someone can share his project experience in migrating the blanket release to the Oracle.
Thanks
Vishalaksha

I do not think it is available in 11i -- Please see (HOW TO IMPORT BLANKET SALES AGREEMENT AND BLANKET RELEASE. (Doc ID 336086.1)) for details.
You may log a SR and confirm this with Oracle support.
Thanks,
Hussein

Similar Messages

  • Payables Open Interface Import pass distribution set for header?

    Hi all,
    i'm using OEBS 12.1.3. I want to insert data into payables interface tables to create invoice via back-end. Is it possible to pass data for the DISTRIBUTION SET on header level? I searched in the table AP_INVOICES_INTERFACE but no such column founded. I'm able to pass info for the distribution on the line level...
    Any ideas?
    Thanks in advance,
    Bahchevanov.

    The before report trigger error does occur for n number of reasons...some of the solutions could be
    1. Setting up the debug/summarized params to Y or
    2. Two payables open interface import programs running at the same time and due to non-incompatibility setups, one of them is getting errored out. Try setting up incompatibility and this error will go away - the only problem with this approach is that if this program needs to run on frequent basis, then one will wait on other to complete and consume lot of time.
    3. Try to increase threads of concurrent manager under which this program runs for better resouce management.
    4. Check the normal AP side setups such as tax code definition, supplier site 'pay site flag' etc --Although before report error occurs at the place in rdf where these checks are yet not done but thought to share with you if it helps
    Thanks
    Girish

  • R12 Order Management Setup and API for Pick Release

    Hi All,
    I am doing pick release using Release Sales Order form of Order Management of Oracle Apps R12. Pick Release process is going fine , but the the status of lines are not getting updated. If we explicitly do reservations before pick release and then do pick release from Release Sales Order form, line status is being updated as pick released. If we do pick release from Shipping Transactions Form, then there is no need of explicit item reservations. Please suggest me, is there any setup steps to be done, so that i will tell the functional guys to do it.
    Also I am executing the WSH_PICKING_BATCHES API for create batch and release batch, the same thing i.e the pick release process is working fine but the line status is not getting updated.
    Is Release Sales Order form and Shipping Transactions Form uses different API's to do the pick release?.
    If we have to do explicit Item Reservations, what is the API used?
    Thanks and Regards,
    Mahesh
    Edited by: magu on May 1, 2009 11:59 AM

    I figured out the problem. In Release Sales Order Form, we have to uncheck the Prior Reservations Only check box, so that the items will be first reserved and then pick release.
    Thanks and Regards,
    Mahesh

  • API/Interface for Blanket PO Release

    Hi All,
    Do we have any interface or api for Blanket PO release? We searched, couldn't find anything.
    Is there any workaround? we are in the process of automation. Its very urgent.
    Thanks in advance.
    Regards,
    Ganesan G

    Hello,
    As a specific solution you may use the following packages/function in R11i :
    •     PO_RELEASES_SV4.get_release_num, to get the last release number,
    •     PO_LINE_LOCATIONS_PKG_S3.get_max_shipment_num, to get the last shipment_num of a release,
    •     PO_RELEASES_PKG_S0.Insert_Row to create a release,
    •     PO_LINE_LOCATIONS_PKG_s0.Insert_Row to create a shipment line
    Beware, these packages are not public, so they may potentially be updated through a patch / upgrade.
    As previously said by Sandeep Gandhi, the best solution is to use requisitions, but you need to manage the corresponding setup.
    Regards,
    Xavier

  • Server API for Looking up Web Applications

    Is there a public server API for obtaining a list of deployed web applications and configuration information for those deployed applications?
    Thanks.

    We strongly discourage to use the tomcat APIs. We may support those API's this version and may not support in next version. You can find the deployed app's from server.xml or admin interface. There is a work around to find the deployed applications programatically by using the command
    asadmin> ist-components --user admin_user [--password admin_password] [--host localhost] [--port 4848] [--secure | -s] [--passwordfile file_name] [--type application|ejb|web|connector] instancename

  • Open Interfaces Documentation

    Hi
    I need to get the list of Open Interfaces dynamically using certain API.
    Can you provide any documentation for this.
    Where is the documentation of Oracle Integration Repository available,
    Thanks

    That is the correct API, but I have never seen any documentation. I would avoid it for R12 based on Metalink Doc 7018312. Maybe OK in R12.1?
    I'm often amazed at how much work goes into the Projects API's, yet so much goes undocumented!
    Also see: PA_CONTROL_API_PUB

  • Reg : Open Interface Tables in Oracle Manufacturing Suite

    Hi Gurus,
    Can anybody help me providing link to get Oracle Open Interface Tables related to Manufacturing ( PO.INV,BOM,WIP,DRP/MRP ) Suire and their usage details ( i know Oracle Documentation has all these details in Open Interface documents ), i am looking for short white papers or brief notes on the Open Interface tables.
    Please help
    Regards

    Sure there is quite good documetation on Open interface tables for the Oracle Manfacturing suite.... You can explore matalink for getting the latest documentation. or you can browse http://oracletimes.blogspot.com which has the resource links for various documetation.
    Thanks
    Navin

  • Move transaction open interface

    I import move transaction through Move transaction open interface.
    The 11i open interface user guide tells that for WIP transaction completion, I need to insert a row into WIP_MOVE_TXN_INTERFACE, and also a line into CST_COMP_SNAP_INTERFACE.
    What is the purpose of the table CST_COMP_SNAP_INTERFACE ?
    I have tried a scrap transaction through Oracle Applications screen. I have compared the result when I insert the same transaction in WIP_MOVE_TXN_INTERFACE (no line is inserted into CST_COMP_SNAP_INTERFACE table).
    And the result seem to be the same (data in table CST_COMP_SNAPSHOT are the same with the 2 method). So , why should I also insert a line into the CST_COMP_SNAP_INTERFACE table ?
    Thank in advance.

    Hi,
    What is the application release?
    Was this working before? If yes, any changes have been done since then?
    Please see if these documents help.
    Note: 141685.1 - Unable to Close WIP Discrete Jobs
    Note: 460061.1 - How To Check the Inventory Interface Manager's Status Programmatically
    Note: 735186.1 - Outside Processing Transactions Occasionally Get Stuck In Pending Status.
    Thanks,
    Hussein

  • Editing the Customer Address using Open Interface

    Hi All,
    The requirement is to edit the address details(postal codes) of the customer using Open Interface and not the APIs.
    They are insisting on using open interface as the Vertex validation(Taxation rules) is taken care only by Open Interface.
    Will need help on this.Kindly advice.

    Please refer the following whitepaper
    https://metalink2.oracle.com/cgi-bin/cr/getfile.cgi?p_attid=67196.1:1
    Thanks,
    Anil

  • Item Category Assignment Open Interface concurrent program

    Hi,
    A quick question,
    Can anyone please tell me why "Item Category Assignment Open Interface concurrent program" is used for.
    Purpose of running the program.
    Thanks in advance.

    Pl post details of OS, database and EBS versions.
    Pl see if MOS Doc 1060824.1 (R12: Supplier Open Interface APXSUIMP Errors with REP-0004 Output Does Not Indicate Reason for Rejection) is applicable
    HTH
    Srini

  • How to open up a public web directory under apache

    We have 7 2005Q4 installed, and right now the entire web tree is protected. Is there a way to create a Policy to open up a public web directory for all users?
    thanks.

    So you are reading this file in a standalone version of Acrobat? If so then use the PDF Open Parameters /a option via the command line.
    Sabian
    Example:
    C:\Program Files\Adobe\Acrobat 7.0\Acrobat>Acrobat.exe /A "zoom=1000=OpenActions" "C:\Program Files\Adobe\Acrobat 7.0\Acrobat\SimpleSubmit.pdf"
    Where:
    Path to Acrobat: C:\Program Files\Adobe\Acrobat 7.0\Acrobat>Acrobat.exe
    Note: The example starts in the Acrobat application directory
    Switch: /A
    Parameter Syntax: "zoom=1000=OpenActions"
    Path to file: "C:\Program Files\Adobe\Acrobat 7.0\Acrobat\SimpleSubmit.pdf"
    Note: The quotes are very important for the syntax to work appropriately.

  • APIS FOR RECEIVING OPEN INTERFACE

    Hi all,
    Can any one help me regarding APIS for receiving open interface for ASN(Advanc shipment notice)
    regards
    SREE

    For 11i, all public APIs are listed at http://irep.oracle.com
    For R12, use the Integration Responsibility responsibility to look up the APIs
    HTH
    Srini

  • Api or open interface for ABC class

    Hi All,
    Is ther any api or open interface available for mass updating items with new ABC class ?
    Regards,
    Sam

    There is no api. So recently, I had to use the following unsupported way to achieve this.
    There are no other relationships for this table so you can do a straight insert.
    insert into MTL_ABC_ASSIGNMENTS
    (select v.inventory_item_id, g.assignment_group_id,c.abc_class_id,sysdate,11531,sysdate,11531,null,null,null,null
    from MTL_ABC_ASSIGNMENTS_V v,MTL_ABC_ASSIGNMENT_GROUPS g, MTL_ABC_ASSGN_GROUP_CLASSES_V c
    where v.ASSIGNMENT_GROUP_NAME = 'OLD GROUP'
    and g.assignment_group_name='NEW GROUP'
    and c.abc_class_name= substr(v.abc_class_name,1,1) -- the new group is the first character of the old group
    and g.assignment_group_id = c.assignment_group_id
    --and inventory_item_id!=18895
    Hope this helps,
    Sandeep Gandhi

  • Api's for payables open interface

    what are the API's that are used in payables open interface????

    You can see details at
    http://www.oracleappshub.com/account-payable/oracle-api-availability-oracle-payables-ap/

  • Open interface for physical stock counts

    Dear All,
    I need to know whether there are any open interface available for physical stock counts.
    Version 11.5.10.2
    Regards,
    MPH

    Hi MPH
    The Cycle Count API is a public API & it takes a cycle count interface row that has been passed through the p_interface_rec parameter and processes it based on the values of the parameter fields. The Cycle Count API includes the public procedure import_countrequest.
    Cycle count API Parameters are as below
    p_api_version_number
    p_init_msg_list
    p_commit
    p_validation_level
    x_return_status
    x_msg_countx_msg_data
    p_interface_rec
    Hope this will help.
    Regards,
    S.P DASH

Maybe you are looking for