Open item management is not activated

Hi Consultant,
I want to activate the open item management in GL. We have done correct setting another GL account. The amount should be transferred from old GL to new GL. The old GL become zero balances. We will try to activate the open item management and we can't change the setting. The user wants to maintain the same GL account. I tried to execute sap standard programme RFSEPA01. Kindly guide me.
Regards,
Krishnan.

Hi,
Me too got the same problem, but the way i had cleared the issue was different. I just reversed all the entries and nullify the GL Account. Then i tried to check the open item management, the following error message i was getting.
FH190 Account balance = 0 but open items exist in the account
Then i controlled that message via OBA5 to warning message and then i was able to check the open item management.
So my purpose was asking for any error message was this only. However can you say me any error message number with diagnosis?
Regards,
Jigar

Similar Messages

Postings to G/L accounts with open item management are not permitted Messag

HI All,
Me activiated New GL. and when I am trying to post the
document, I am getting the below error.
The GL used 200100 is Cash A/c (40)
Cr Eq Share Capital A/c (50)
As Cash A/c requires Clearing, I have activated "Open Item Management".
Can you advice me why Its giving me the below mentioned error.
Thanks
Postings to G/L accounts with open item management are not permitted
Message no. FAGL_POST_SERVICE012
Diagnosis
You use G/L account 200100 in company code RLIF with open item
management. However, postings are not permitted to G/L accounts in
individual ledgers with open item management.
Procedure
If you have not yet made any postings to this account and if the
account is to be used for closing processes in non-leading ledgers,
deactivate the Open Item Management indicator in the company code data
for the G/L account.
Thanks,
Niranjan Yandamuri

Hi,
Please, refer to note 1646466 for the info on this message.
Regards,
Eli

Postings to G/L accounts with open item management are not permitted

Dear all,
i am getting one error FB01L ledger specific posting for ledger group L2 ledger (IFRS) error is "postingst o GL accounts with open item management are not permitted " i am posting both gl accounts are balance sheet account, please help me how to resolve the problem .
Message no. FAGL_POST_SERVICE012
Reregards
rajashekhar

Dear all,
Thanks for reply, The error message appears FAGL_POST_SERVICE012 because it is generally not permitted to use the O/I managed account as an adjustment account.It is not possible to post on Individual Ledger (on a Leading or non-leading) on OI Account. This is for your informations
We want to post ledger specific for L2 ledger i am getting above error can help me how to sovle the problem , otherwise any alternaitve solution for posting L2 Ledger

Posting to gl a/c with open item management are not permitted.

hello,
When i run FAGL_FC_VAL it display the report and generate the batch input session.
But when i run the session the error massage appear -
"posting to gl a/c with open item management are not permitted."
When i post the same gl mannually, it doesn't show any error.
The Same Problem appear when i run the session generated from FAGLF101- the regrouping program.
Can any body give some idea, what should be done.
Thanx
Subodh

Hello this is chandu,
When u run the fc val it posts the ex gain or loss to respective a/cs.Means those a/cs are not B/S a/cs.Only B/S a/cs we select open item management which r require to maintain on OI management basis.
So try to maintain other a/cs for ex gain and loss y bcoz once u post any transaction in those a/cs which r created already on O Item mgnt basis u cannot change that again.
Then assign those a/cs to automatic postings and run the rc val again
May it will be useful to u
Thank u

FB50L error: Postings to G/L accounts with open item management are not permitted

Dear All
I need your help.
I am trying to do some adjustment to GR/IR clearing account in Non-leading ledger. Since for this account open item management is ticked, I am getting an error message 'Postings to G/L accounts with open item management are not permitted'.
Now I have checked the forum to find some solution...but does not fit my requirement.
I cannot create a new account. I cannot change the existing account. I tried OBA5, but the message persists.
I also checked the notes.
Appreciate a response on how the post to open item managed accounts in non-leading ledger.
Regards
Kunaal

Hi Kunaal
Usually, OIM accounts are not allowed for Non Leading Ledger postings... With EhP4 or 5, i guess, a new feature is added in GL Master whereby you can specify that a GL will be OIM for Leading Ledger and Not OIM for a Non Leading Ledger
Regards
Kavita Agarwal

ASKBN - Postings to G/L accounts with open item management are not permitte

Hi All!
I have a problem: I run the transaction ASKBN (periodic asset postings) and receive the message about error: "Postings to G/L accounts with open item management are not permitted".
Please let me know how correctly run the transaction?
Thank.

Hi,
if you would have posted this information with your opening post, it would have been more helpful. How should the community know this detail?
Regards,
Markus

Postings to G/L accounts with open item management are not permitted in ASKB

Hi Gurus,
I have the error FAGL_POST_SERVICE012 'Postings to G/L accounts with open item management are not permitted' when i run the transaction ASKB. The very strange thing is that in table APERB_ITEMS for this company code there isn't any record. My questions are:
1. The ASKB posts only if the APERB_ITEMS is populated?
2. If yes, Why the ASKB wants to create postings on this company code?
3. If no, which are the logic conditions that include a asset in the ASKB execution?
4. If the logic is correct, how i can to run the ASKB on OI accounts?
Thanks in advance,
Best Regards,
Emanuele

Hi ,
I believe you know why do you run transaction code ASKB if not please see below
The report evaluates all asset transactions since the last run. Unlike the periodic depreciation posting program, the APC posting run is not tied to a certain accounting period. It generates one document per posting period and depreciation area. That means that asset values are summarized for various account groups in one document. Document number assignment is external. You have to enter the document type in Customizing for Asset Accounting.
There are various possible ways of posting APC values:
To an account set within the original company code
To an account set of an alternative company code
To an account set directly in a special ledger
The account set can be determined from a different depreciation area.
Derived depreciation areas can be treated as real depreciation areas. This means that the system posts APC differences rather than special reserves, as was the case up to now.
During a test run, the system completes all accounting checks (for example, budgetary control of objects belonging to Funds Management).
While doing above system reads and update table APERB_ITEMS . If you look to Program for ASKB is RAPERB2000 and if you take your ABAper help to under the coding he will tell you that is program use APERB_ITEMS to update and read.
MANY THANKS
REGARDS
Preeti Agarwal

Error- Postings to G/L accounts with open item management are not permitted

Hi,
Can't we post to a GL, which is open item managed, in a non-leading ledger (statutory ledger)? We get this error when we try to post an entry, in the statutory ledger, to a GL that is open item managed.
Can anybody explain this, please?
Regards,
Mike

This is due to a design with the new GL.
In the new G/L accounting, when you use a particular ledger or ledger group, you can no longer make a direct ledger specific posting to accounts managed on an open item basis or to accounts with an account type not equal to 'S'.
You need to do posting with ledger group blank, which updates all the ledgers. The idea is, for open item accounts, all the ledgers should be in sync. for open item accounts IFRS and Local GAAP values are never different.
If you are doing this to do some correction posting while doing year end posting or migration for example. (A typical example is when an account is made open item managed at a later date). You need to change temporarily message control using transaction SE91 to force ledger specific postings to OI accounts

Posting to G/L accounts with open item management are not permitted

Hi all,
I am trying run run foreign currency valuation in SM35, but the system prompt me error in FBB1 saying that posting to an open item management account is not permitted. I try to unchecked the 'open item management' flag in 'Change G/L account centrally', but another error message tell me that 'the account does not have a balance of zero'...
Kindly help, thanks

Hi
If you have balance in GL account you can't make it as "open item management"
make zero balance
block the account for further postings
run RFSEPA02 in SE38
then unblock the account
transfer the balance from the dummy account
Regards
Prasad

Account type M and G/L account with open item management not permitted

Hi,
I am getting the following error while applying VL02N (PGI) is "Account type M and G/L account with open item management not permitted". Before I got an error like posting period and I have closed those posting periods 2008/08 and 2008/07. Now I am getting this error.
Please provide the solutions to overcome this and I want to execute the full transaction.
Thanks in ADVANCE.
Kishore

Hi Kishore,
Please check these threads
Account type M and G/L account with open item management not permitted
Re: Account type M& GL with open item managment not permitted error
Posting to G/L accounts with open item management are not permitted
Hope this would help you.
Good luck
Narin

Activate Open Item Management for a tax GL account

Hi experts
I have tried different options and explored forums but haven't been able to find the solution as yet.
I have some tax GL accounts (Tax Category field in their GL master is < or > i.e. Input or Output Tax Account). There have been postings to these accounts but these accounts are not open item managed. To perform clearing for these accounts, I need to activate OIM for which I'm trying FAGL_ACTIVATE_OP but the system gives me error"
"Not possible to determine tax indicator in company code xxxx
Company code xxxx is not considered for the activation"
When I further drilldown the error, i find the following information:
Diagnosis
Postings to the selected account require a tax code. On the basis of the company code data (T001), the system tried to determine a tax code for zero tax. However, there is no such tax code stored for the company code.
Procedure
Specify the tax code for zero tax in the company code. You do this in Customizing for Financial Accounting Global Settings (New) under Assign Tax Codes for Non-Taxable Transactions.
I have checked settings in OBCL for Non-Taxable Transactions and found that I0 and O0 are maintained for Input and Output tax (also tax jurisdiction). In Table T001 I also find these entries so these seem to be complete.
Can somebody please help me sorting out this issue.
Many thanks!
Moazzam

Hi,
Some G/L accounts cannot be managed on an open item basis,
specially G/L accounts that are used in account determination for
automatic transactions (ie: accounts set up as bank accounts, Tax
accounts, raw material accounts, reconciliation accounts, profit and
loss accounts).
It is the standard design of the FAGL_ACTIVATE_OP that there is no
conversion of a tax account to open item management.
Processes as the posting of the sales/purchases tax payable do not
process any clearing transactions therefore the open item management is
not necessary. Clearings must really never be posted to an input VAT or
output vat tax account, otherwise it would prevent subsequent processes
on the actual open items (Customer or vendor). The only tax account on
which the open item management should be possible is the G/L account of
the deferred tax.
Hope my information was helpful for you.
Regards,
Cristiano

Open Item Management status on G/L

Hi Everyone,
One of the GL account is not allowing to change its status to Open Item Management. We tried to convert this, but the process could not be completed because the sum of the transactions did not equal the balance (by 448.69).
It appears that the transactions that occurred up to P3 2002 (-448.69) are not present or not recognised by the system. The earliest transactions that can be selected in GL are in Jan 2003.
Would be greatful if you'd post to shed any light on this issue?
Reg,
Support Team.

Hi,
It is possible that line item management was not activated until after postings had already been made. (Check the change logs for the effected account).
If using classic G/L you can run RFSEPA01 to correct this. Subsequently use RFSEPA02 to activate open item management.
Kind regards

FH087 - Remove open item management to GL Accounts

Dear All,
I need to remove open item management to few GL Accounts. The balance is Zero now.
I removed the open item management and try to save the GL Account and the error meesage showing with FH087 - You cannot change Open Item setting.
Requesting help and guidelines from the forum.
Thanks in advance,
Regards,
SS

Hi
Please refer to below answers:
1) the OSS note 175960, mentions the afftected releases for software component SAP_APPL is till release 600. Currently we are at SAP_APPL 604 level 07. Is this note applicable to us?
Yes, it can be used.
2) Will the program ZFSEPA03 / RFSEPA03 converts the current open item line items to line item display?
The report does the following:
1. Sets a posting block to the GL account.
2. Selects all open items and deletes the XOPVW indicator in tables BSEG and BSIS
3. Deactivates the XOPVW flag in the GL account master data.
4. Deletes the posting block.
3) After executing this program, if suppose later any of the clearing document for the cleared items in the account got reversed. Will this items become open item again? if yes, then it won't be possible to clear these items as the gl won't be open item managed.
I am not sure about this step, but you will have (old) cleared items in the document tables (BSEG/BSAS) which does not match the current account settings (as these items are from the dateBEFORE the change took place). But this does not have any influence on postings in the daily business.
4) Any pre requisite like the gl account should have zero balance or there should not be any open items, before executing this program ZFSEPA03.
The subsequent deactivation of open item management is not that critical.
It is not necessary to bring the account balance to zero, you can execute ZFSEPA03 without any correction postings. And it is even not necessary to change the master data manually, this will be done by the program.
5) is there any other transaction similar to FAGL_ACTIVATE_OP for deactivating the open item managed tick in ECC 6.0 with NEW GL active.
You will do it by running the mentioned report.
The RFSEPA03 or your 'Z' version will not have any influence on the NewG/L tables likeFAGLFLEXA Only the currently open items will set to normal items.
Regards
Divya S

Open item management in GL master data

Hi
We created GL master data in 2000 and that time "open item management" was not selected.
Later in 2004 we needed "open item management" so we canged settings.
now the problem is we are not able to see cleared items for that GL A/C.
even if we clear also it is still showing open item only.
Thanks in advance
Regards
prasad

Hello
If you have created a GL account without selecting open item managment check box and lateron you found that it should have been maintained on Open item basis,the system will not alow you to mark the checkbox as open item mangt if some open items still exist.
First make the account balance to zero by clearing the account.Even if the system issue a error msg try these:
Block the relevant account for posting in the company code
Run program ZFSEPA03
Unblock the account
In earlier versions there was a program which when run allows you to maintain OI for future transactions, but I am not sure about this now
reg

Open Item Management in ECC 6

Hello All,
Just overheard that open item management is not possible in ECC 6.
If true, how do we manage the same?
Thanks
Suresh

Hi,
I am using ECC 6.00 opn item is possible there.
Best of luck.

Open item management is not activated

Similar Messages

Maybe you are looking for