Open Item Mgmt

Hi
i have problem one of my bank cheque clearing account i was not check open item management
now i have to change that account to open item management
but it is not accepting
i had heard that ther is programe for effect open item management to past iems also
can anyone give the details

Hi,
Intially block your GL for posting and Tick your GL Open item and then GOTO SE38 and RUN RFSEPA02 enter the required details.
or
Normally this is not suggested,Do not use the report program to set up open item management for the account.
Create a new account with the correct account assignment. Post your items to the new account. If you want to use the original account number, you must bring the account balance to zero, change the account assignment, and repost the items. You can remove the old items by archiving the documents.
this may help you
regards,
Santosh kumar

Similar Messages

Open item mgmt activated for A/C with old program instead of new in NEW GL

Our version is ECC6.0 (EHP3) and activate NewGL, the open item management parameter for the account was forgot choosing during go live, Now the account have actual posting ,we can't tick open item management parameter directly. so we run these programs are ZFSEPA02 and ZFSEPA03.
the program run successfully and activated the Open Item mgnt but now this is giving error "document splitting error; no open items to processXXXX/XXXXXXXXX/XXXX", because these programs only for below ECC6.0, unfortunately couldnt run the new program which is suitable with NEW GL(ECC6.0)
checked even with FAGL_ACTIVATE_OP and OSS 175960 but there are other threads which are not suggesting this.
Please, valuable suggestions are needed, I know there are many threads which spoke about this but not in this same case.
hoping to solve this issue with great ideas from all SAP gurus.
awaiting for your reply
Edited by: YELLA REDDY sama on May 19, 2011 12:18 PM

Hi again Milind Sonalkar,
the note you specified (1309427) tells :-
"Solution
Use the log (transaction SLG1, object FAGL, subobject OPENITEM) to find the clearings specific to ledger groups. Use these documents as templates to manually make the return postings using transaction FBB1. If you require help with regard to the manual return posting, contact SAP Support and refer to this note."
with this I understand that for the account, the program(trns FAGL_ACTIVATE_OP) executed is not able to post to rest of ledgers except the leading ledger and need to post by manually in FBB1? what is return postings in the note?
for more information for the account used is a balance sheet account and has open items after execution of old program "Z"RFSEPA02. so while trying to clear them by F-03 it sends the above(in 1st port) mentioned error. Here I understand that first need to post(clear) manually to those open items which are posted before marking OI. am I right?, please enlighten me.

Open Items exist.. Not possible to change parameters ??

Hi all,
I made some X account balance to zero. And now when I was trying to change the account as open item (prior not in open item mgmt), system says that 'Account balance is 0, but still open items exist. Change not possible'. What does that mean ?
Suresh

Hi,
Once transaction data is posted, GL Account cannot be made into an open item managed account. However, you can consider the following options:
1. GL Account Balance is ZERO: If the GL Account balance is ZERO, the GL Master record can be changed to Open Item managed Account or vice versa. But this will not change the transaction data already posted. Only future transaction data will be open item managed.
2. Until SAP version 4.0B SAP has provided a program to convert a GL Account to open item managed account after transaction data is posted (or vice versa). You can execute this program by blocking the GL Account and this will make the required changes in tables and also change GL Master record.
But this program is not available for execution in higher versions. Hence, you can copy the program into a Z Program and execute it. The name of the standard program is RFSEPA02.
Thanks
Murali.

Data in BSIS/BSAS for a non-open item managed account

Hi
We have a GL account (Bank account) which does not have open item management checked in its master data,
Still I can find line items for this account in table BSIS / BSAS
How is this possible ? and if an account is not open item managed, how do the records move from BSIS to BSAS ?
Regards
Sachin

Non Open Item Account should have entries only in Table BSIS and no entries in BSAS. Check if there was OpenItem mgmt earlier but deactivated later.

Open item management tick status for all gl

is thr any t.code by which we can check on which gl the open item management tick available on our chart of account in fs00...?

Hi,
1. First got to the transaction se16 , give table T001 and give the COA in the field KTOPL then derive all the respective CC(BUKRS) assigned in it.
2. Then Go to SKB1 and give all the field values in BUKRS which are derived above and flag the field XOPVW as "x" and execute
Now you are going to get all the OI mgmt enabled GL accounts for a particular COA.
Definately this is going to resolve your Querry.

Open Item and Line Items are not matching

Hi Gurus,
I ran the EFT for vendor #1600109 for payment on 10/18/07. If I run the vendor open items report (ZFI019) for today, it shows the balance net of the EFT that is $203,466 ( $263869 - EFT Value is $60,403).
When I ran the vendor line items display (FBL1N), it shows all the invoices including the invoices paid on the Oct 18 EFT $263,869 which is (2034,66+60,403).
User wants the open item report should tally the line item display.
I will assign good points.
Thanks for your help
Prashanth

Hi Gurus,
EFT is working fine. But the Vendor Open item Report (Custom Report) and Vendor line item report (FBL1N) is different.
We are looking a balance for a vendor as on 15th where the balances are not matching between the reports but if i run FBL1N on 18th the balances are matching.
Clearning date is 18th
Posting Date is 15th.
Thanks
Prashanth

Vendor's same open item selected for payment twice through APP run F110

Hi,
In F110 run, specified vendor number and payment method(Bank Transfer), executed payment run.
After, say 5 minutes interval again executed F110 for all vendors and except for the above mentioned payment method.
In the first case, payment document generated, posted and cleared the Vendor open items. Here, the Payment method is B.
In the second time also, the same open items are selected in the payment run and the payment method D(Cheque payment).
Payment document generated and is not posted but cheque is generated for the same amount.
How could it happened?

Hi,
In F110 run, specified vendor number and payment method(Bank Transfer), executed payment run.
After, say 5 minutes interval again executed F110 for all vendors and except for the above mentioned payment method.
In the first case, payment document generated, posted and cleared the Vendor open items. Here, the Payment method is B.
In the second time also, the same open items are selected in the payment run and the payment method D(Cheque payment).
Payment document generated and is not posted but cheque is generated for the same amount.
How could it happened?

Unable to Clear Vendor open items in F.13

Hi All,
We have few vendor codes, where all are having some normal open items as well as Spl GL open items and net balance is 0.
When we do clearing with F-44, No issues at all
But when we try to clear them through F.13, system is grouping normal open items and Spl GL transactions separately.
If i choose Shortlist (Statistics) in selection screen, then only atleast i will be able to see normal line items in one group and spl gl items in another group.
If i choose, Detailed List with Error Log, i am not able to see anything related to any kind of line items.
So then, i red the documentation of the program SAPF124, in that it says Down payments can only be cleared if down payment clearing for the same amount has been posted.
As we all know that, each spl GL transaction can be cleared against one normal transaction in F-54. But in our case, we never do that practice, and always want to clear spl GL transactions along with normal transactions.
My question is that, Is it mandatory to clear them in F-54 before doing F.13?
As i know, there is an check box option for selecting spl GL transactions in F.13....in this case why should i clear prior to F.13?
Please advise...
Regards,
Srinu

Hi Gaurav,
Thanks for your inputs.
I agree with you, but my intention is to know, whether any possibility (change of internal selection criterion for recon account)
to clear them automatically in F.13 without doing F-54 only.
Anyhow i have found two other alternative solutions for the same.
1) Batch input recording for F-44 in LSMW.
2) Using worklist instead of vendor code in F-44 to clear all items at one go.
As our business won't follow clearing with F-54, so this requirement may come often.
But only my concern is, they need to identify these cases separately and spend more time to add each vendor code to that worklist, since they are not able to add a range of vendor codes directly. As it allows only single values.
So, is there any other way, which we can suggest them to add 10000+ vendor codes to the same worklist, since we can add 12 codes at one go and repeating the same will take time
Regards,
Srinu

Possible to clear vendor open item against already posted payment document?

Hi
Can you advise if it is possible to clear an open item against already posted payment/clearing doc? Here is the background to the scenario:
An invoice was posted with transaction FB60. This was subsequently picked up in the payment run F110 and cleared by payment document number 200005678. The item went to the bank on the paymnet file and was paid out to the vendor. The transaction reference, which appeared on the incoming bank statemnet was the payment document number 200005678.
Subsequently it was discovered that the original invoice should have been posted with reference to a PO using MIRO. The requirement now is to reverse the paymnet documnet 200005678 in SAP, then reverse the document that was posted using FB60. After this the invoice will be posted using MIRO. This will create an open item on the vendor account.
This item will not be piad out again. Therefore the requirement is to try clear that open item against the previously posted payment document 200005678.
Is there any way to clear this vendor open item against the originally posted payment document 200005678?? Or any other advice on how this scenario can be handled in SAP?
Thank for your help.
Mike

Hi,
I tried that option in our test system. I ran FBRA and entered Paymnet Documnet Number (+Clearing Doc Number), Company Code, Fiscal Year.
Then chose menu option Clearing -> Reset Cleared Items.
The system pops up a window asking for a reversal reason and reversal date. I use 01 and posting date of today.
The system now posts another cleared document. That document places the invoice as an open item on the vendor account. It does not place the Payment Document as an open item on the account.
When I go to F-44 only the open vendor invoice is showing there. There is no open paymnet document.
Is there perhaps some configuration setting that stops the placement of the paymnet document as an open item when reset?
Thanks for your help again.

URGENT---Automatic payment run-Vendor open item clearing

When I run the payment program, it ran without any error, however, the vendor account was not cleared. The balance in GL and Vendor account remains the original amounts. And the Vendor line items which were supposed to be cleared thru F110, are now showing as Open items.
please give me the TCODES to look in.
Please help.
Thanks in advance
Sharath

Dear Sharath,
To check whether your payment run has actually generated any payment document or not, please follow the following steps:-
(1) Go to transaction SE16/ SE16N and table REGUH, give the "payment run ID", "run date" and "Proposal Indicator as blank".
     It should show the payment document.
(2) If (1) above show payment document, then go to table REGUP and check the invoices paid.
   If invoices are there in REGUP, then there might be some issue in the payment document updation in the system which you can check via transaction SM12. (For this just check in table REGUV, whether payment documents created and posted are equal or not for the payment run.)
(3) if (1) do not show any payment document, that means payment run has not made any payment.
    In this case, you create a new payment run and in the parameters select the error logs display also and in free selection give the document number you are expecting to be paid off by the payment run. This might help you to know the reason of non payment by cheking the proposal log/ payment run log.
I hope that this should assist you
Regards,
Gaurav

Vendor Open items Authorisation

Hi Peers!
Is there any report were i can authorise the payments to which vendor and which invoice i can pay today like that.
Ex: Say my higher authority wants to select the open items vendor wise to pay the due. so that i will check that invoices and pay through outgoing payment.
Pls reply soon, Its urgent
Thanks
Murali

Hi
There are so many age wise analysis reports are there for analysing the customers or vendors open items. out of those, F.41 for vendor open items there you can find all the relevant data including business area level also satisfied because in some cases higher management wants the particular business area wise required for analysis. similarly f.21 for customers.
I hope it will be suffice your requirement.
Regads
madhav

Reset Cleared Documents and Vendor Open Items Report FBL1N

Hi all,
I have following scenario:
- In last month, we had 2 documents (invoice and payment) cleared against each other. We created open items report as well as open items correspondence sent to Vendor. Obviously, the docs were not included in report.
- In this month, we have reset and reverse clearing document of the documents. We create report again with the open key date as in last month. It should not include the 2 docs but it did with whichever key date we chose.
Is there any setting that open item report doesn't include cleared item at the key date when we run report for previous month?
Thanks and Regards,
Dau

Hi Dau,
If i understand you correctly then you posted and paid invoice in Jan 2012 and generated the open line item report for Jan which correctly did not include this cleared invoice.
Now in Feb 2012 you reset and reversed this payment document.
The issue is when you execute the report FBL1N again then you get the open line item for this invoice correct. Please confirm what is the open item key date that you are using here for generating this report
If you keep it 31.01.2012 then definetly this invoice should not appear in the report but if you keep that 29.12.2012 then this line item would for sure appear.
The importance of key date is to limit the report to certain date. The system selects all items posted up to and including the specified key date and open for this period.
so I think your issue is with the key date.
Hope this helps you.
Regards,
Prasad

Vendor open items wise ALV Grid Display (FBL1N) report to Excel Sheet

Hi All,
I need vendor wise open items and cleared items in ALV Grid format in excel sheet.
I'm Trying that in T Code FBL1N, After the execution. I had select ALV Grid format like this From the menu bar->Settings-> Switch list.
After that i get ALV Grid format, Then i'm doing export the data to excel sheet. like this From the Menu bar->List->Export->Spread sheet.
That time i'm getting Error Message no. 0K064, Filter criteria, sorting, totals and subtotals are not taken into account.
I want vendor wise sorting totals and subtotals,
How can i over come this Error please let me now.
Thanks,
Amar

Hi Amar,
Please check the KBA 2083705.
https://websmp230.sap-ag.de/sap(bD1odSZjPTAwMQ==)/bc/bsp/sno/ui_entry/entry.htm?param=69765F6D6F64653D3030312669765F7361706E6F7465735F6E756D6265723D3230383337303526
Regards,
Monika

Deleted Items Appearing on the FBL3n Report for Open Items

Hi All
We just went live and I am facing a huge issue;
I deleted many migration entries from loads of GL Accounts for multiple Co Codes, but on the FBL3n report, whenI execute with the option of 'Open Items' only, I still see the deleted items with a green check sitting there.
How can i get those from being visible?
Thanks for the support
RS

Hi:
This is standard behavior. Your GL accounts are managed on line item basis hence despite of the fact you reversed the entries they will continue to be shown in open item selection criteria which in fact are not open items. It makes no sense to see a GL account in FBL3N on open item date since this account has been configured on the basis on line item management and i will continue to be shown as line item with green sign . Execute report FBL3N with open item or with all item (with date you give in open item) you will see the same figures and same line items. However you can exclude the reversed entries by fetching reversed with (BKPF-STBLG) field from menu ..settings...special fields and hence excluding the entries having this filed update.
I hope this will solve your issue.
Regards

Open Item Report

Hi SAP Gurus!!
I have something in mind, i need your help guys. I want to make a report of all open items ( vendor ). I would like to customize a report for this. I want to:
1. Display all open items net of payments. Line item should display remaining balances only.
2. I would like also to display all MIGO transactions that have no Invoice receipt yet.
Requirements: I want to do this in a query, what are the sap tables should i use to make this report.
I already checked FBL1N and chose INVOICENET layout, but still i am not satisfied with that kind of report.
Please help me guys. I will assign maximum points to useful answers.
Thanks in advance.

Hi,
Check this SAP Standard report RFKEPL00 .Go to T.code se38 and enter the standard report RFKEPL00 ( Vendor open items) and execute.Check whether it meets your requirement or not.
To see the tables used in this report, Enter the program name and click on display.and click on INCLUDE fkepl00_top.It will show yo the tables used in the report.
In FBL1N changelayout (Ctrl + F8) , Select purchase document or other fields to meet your requirement.
Please let me know if you need more information.
Pelase let me know if you need more information.
Assign points if useful.
Regards
Sridhar M

Open Item Mgmt

Similar Messages

Maybe you are looking for